How To Make Flying Objects in Wondershare Filmora

Let us be honest here, you want to create fly objects in the air but don’t want to get into the witchcraft school. In that case, we have got your back!

In this article, you can learn how to make objects fly in the air! Technically you will not do that in real-time, but with the latest technology and editing tools at your disposal, you will exactly do that.

Use Wondershare Filmora to create the flying object effect. Scroll below to get the guide to the whole process of creation.

Part 1. What will you need to make a flying object?

This is not witchcraft, so we will abstain from using potions and herbs. Instead, to fly objects in our videos, we will use simple techniques that you may also be familiar with.

Video Cameras

The camera, in this scenario, will be the essential accessory as it will capture your video with the proper aspect ratio. This video camera can now be from a mobile phone or a high-quality DSLR. It will all depend upon your preference for quality and frame rate.

Tri-Pod or camera stands

Selecting the Tri-Pod is also crucial to your quality of video taking as it will ensure stability while capturing the video from the camera.

Stability is the key here, as the captured videos will be masked and combined in the later stages of the steps. To do so, consistently capturing the video in the same ratio is necessary. You can stabilize the video with a simple gorilla pod that you can get of good quality or a simple tripod.

The prop

The prop will be the object that we will be flying in the video. It could be a fluffy toy, a ball, a box, or anything you desire to be flying in your video.

Note: In this article, we are going to use a ball as a prop.

Wondershare Filmora

Now that we have all the physical requirements for the video, our next goal is to ensure that we have the correct video editing software. And what’s best than Wondershare Filmora? Obviously, there’s nothing!

Filmora allows you to edit your videos with ease and comfort. With its interactive UI, even a beginner feels easy to edit a video. With skills on hand, an expert can edit videos ranging from green screen effects to flying objects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Good presentation

Now, if you want your video to shine like the good ones, you will need to know how to present it. In this section, the requirement will be yourself. As you are not flying an object, you must act the part.

A good presentation will allow you to make the video more natural. Because no matter how skilled you are with video editing, a video with props will only be of quality until the subject acts their part with quality.

Part 2. How to capture the footage?

Before we get into how we edit our footage, we need to know how to shoot the video to edit. Follow the steps mentioned below:

• Set up your camera on a tripod or a gorilla pod.
• After setting up the camera, record an empty frame.

Note: An empty frame video will be the one you will use to mask the original clip.

Reference video

Start recording a five-second clip of the sofa where you will be sitting without yourself or the prop. Here you don’t need to add anything except the reference. Follow the guidelines below when making the reference video:

• The video should be plain.
• It should be simple.
• There should be no moving object or subject.

Main video

After shooting the empty frame video, move on to shooting the video with yourself in it. Follow the below to achieve something unique:

• Your focus should be on the prop.
• Use a thread or a rope to attach the prop to it. (In this case, we are using a ball.)
• Attach the ball to the thread and hand it on the roof.
• Record yourself now with the prop with your desired content or script.

After completing the video, simply stop recording. Now you will end up with two video clips.

Adding these two clips in the Wondershare Filmora , you can easily create the flying object effect. To do so, follow the steps explained in the section ahead.

Part 3. Stepwise guide to making flying objects in Wondershare Filmora

Now that we have looked into our requirements, let us dive into how we will apply our skills to achieve an object to fly in Wondershare Filmora .

Of course, without the software, our editing will not be possible, so download Wondershare Filmora from the steps explained below.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the Wondershare Filmora software

• Open the Wondershare Filmora software and Click on the New Project icon on the window.
• After you have clicked on the New Project icon, our main workplace will be launched.
• Here you can see various options.
• To get started, we need to import our video clips to edit them.

• Here, you can see two ways to import your clips in Wondershare Filmora.

1. Shows you how to import by Right-Clicking on File and selecting the import media option.
2. Shows you to drag and drop the file from your main directory simply.

You can choose whatever suits you the best!

Step2Add your clips to your timeline

Now that we have imported our videos into the timeline, our next step will be to add our videos to the timeline.

• Simply click on the imported clips on the import window.
• Then drag it to the timeline below.
• Doing so will create a working timeline you can view and edit as you go along the editing process.

Step3Size the reference video to the original video

Now, remember that we recorded a five-second clip that we will use to create the masking effect. You will need to size it to the original video for that to work. Doing so is simple and will require you to take some easy steps.

• First, click on the clip.
• Then, when it is selected, move on to the tab above to choose the speed option from the bar.
• Here, you will also see options such as cropping, Green screen, and color.
• Choose the option of speed.
• Then, a drop-down tile will pop up. Here you can see different options available to speed up your video.

• You can speed up your video and slow it down.
• For now, we will have to slow it down.

Note: Slowing it down will increase the time of the video clip and allow you to match it with the original video clip.

Don’t worry about the speed, as the video is already empty, and there will be no distractions to disturb our editing.

Step4Add the masking effect

Now that we have our video aligned with the reference video we are using. Let’s move to the next step.

This step will try to remove the thread attached to the ball; otherwise, it will show in the video, and our effect will be ruined. However, before we do that, we will need to know what masking is.

What is the Masking effect in Wondershare Filmora?

Have you ever seen the behind-the-scenes of those big-budget movies? Then you might have seen the actors and the stunt workers hanging from big ropes performing stunts in front of green screens.

Well, the directors capture the video in real-time. But they can do those big stunts on TV with editing and CGI, and one of the effects is “Masking.”

The masking effect allows you to mask the object on the screen with a reference video. So that’s how the ropes attached to the stuntmen get removed in the original videos.

How to add a masking effect?

Although there are numerous ways to do that, the one we will use in this video is to remove the thread. For this, follow the below steps:

• Simply go to the effect icon that you can see in the bar above.
• In the effects bar, move to the utility tab.
• You will see a window showing you the many effects Wondershare Filmora provides you from default.
• Select the shape mask tile.
• Now drag and drop it on the timeline below.

Note: You must ensure the effect is applied to the main video, not the reference video.

• When you drag the effect into the main video, you will notice a transparent shape added to the video. This is your Mask.

Step5Edit the masking effect

You must hide the thread attached to the ball with the masking effect. To do this, follow the below guidelines:

• Double-click on the effect added to the main video.
• You will notice another window pop up on the import library.

Note: In the pop-up window, you will see the multiple options and edits you can apply to the masking effect, such as Transform, Compositing, Motion tracking, and stabilization.

• Scroll down on the window and notice a video effect tab.

In the effect tab, you will have multiple options, such as the shape mask, X, Y, and scale and blur strength options, as shown below.

• Now adjust the mask to hide the string. It may be easy to invert the mask.

Note: That the borders of the mask are blurred. But you can also change them by inverting the mask, which turns the borders and the space between them.

Remember the invisibility cloak from Harry Potter? It works just like that, only with a solid shape.

• Now use the X and Y options to move the mask anywhere in the video.

Step6Hide the sharp borders

You may notice the shape of borders that do not blend with the background. To blend the borders with the background, follow the steps below:

• Simply Double-click on the effect in the timeline.
• Then, in the editing tab, find out the blur strength option.

• Simply drag the bar to increase the blur strength.

Note: Please keep looking in the window on the right. Check and increase the blur strength until you are satisfied with the result.

• Lastly, click on OK when you are done.

Step7Creating the popup effect

Now, if you want your object to appear out of thin air, you must create that pop-up effect. You can create the pop-up effect in simple and easy steps, as shown below:

• First, drag the timeline dragger to the point where you want the prop or the ball to pop up.

Your presentation should be accurate and precise!

Imagine you were doing a “swoosh“ action, similar to swinging a wand. Now you want your object to appear at that time.

Split the Video:

• Drag the timeline dragger to that point.
• Now press Ctrl+B to split both videos.

Add Popup Effect:

The masking effect will be applied from the start. Our goal is to hide the masking effect before the ball pop-ups. For this, follow the below steps:

• Go into the setting by Double-Clicking the masking effect on the original video.
• Then move the mask over the ball instead of on the thread. Doing so would make the ball disappear.

Final Results:

• Lastly, click on Ok when done.

Play the clip from the start, and you will notice the ball popping up according to your action.

Congratulations! You did it. You are now able to fly objects with the power of your mind.

Following the abovementioned steps, you can control objects and make them fly in the air. The catch is that you will have to use Wondershare Filmora . But, of course, this is not a witchcraft school now.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

Well, there comes a time when one needs to make flying objects. Wondershare Filmora is an excellent tool that will allow you to add the masking effect to create the illusion of flying objects in the air.

The video quality at the end will only depend upon how clearly you show during the editing process. Try the above steps and enjoy the results!

Wondershare Filmora

Now that we have all the physical requirements for the video, our next goal is to ensure that we have the correct video editing software. And what’s best than Wondershare Filmora? Obviously, there’s nothing!

Filmora allows you to edit your videos with ease and comfort. With its interactive UI, even a beginner feels easy to edit a video. With skills on hand, an expert can edit videos ranging from green screen effects to flying objects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Good presentation

Now, if you want your video to shine like the good ones, you will need to know how to present it. In this section, the requirement will be yourself. As you are not flying an object, you must act the part.

A good presentation will allow you to make the video more natural. Because no matter how skilled you are with video editing, a video with props will only be of quality until the subject acts their part with quality.

Part 2. How to capture the footage?

Before we get into how we edit our footage, we need to know how to shoot the video to edit. Follow the steps mentioned below:

• Set up your camera on a tripod or a gorilla pod.
• After setting up the camera, record an empty frame.

Note: An empty frame video will be the one you will use to mask the original clip.

Reference video

Start recording a five-second clip of the sofa where you will be sitting without yourself or the prop. Here you don’t need to add anything except the reference. Follow the guidelines below when making the reference video:

• The video should be plain.
• It should be simple.
• There should be no moving object or subject.

Main video

After shooting the empty frame video, move on to shooting the video with yourself in it. Follow the below to achieve something unique:

• Your focus should be on the prop.
• Use a thread or a rope to attach the prop to it. (In this case, we are using a ball.)
• Attach the ball to the thread and hand it on the roof.
• Record yourself now with the prop with your desired content or script.

After completing the video, simply stop recording. Now you will end up with two video clips.

Adding these two clips in the Wondershare Filmora , you can easily create the flying object effect. To do so, follow the steps explained in the section ahead.

Part 3. Stepwise guide to making flying objects in Wondershare Filmora

Now that we have looked into our requirements, let us dive into how we will apply our skills to achieve an object to fly in Wondershare Filmora .

Of course, without the software, our editing will not be possible, so download Wondershare Filmora from the steps explained below.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the Wondershare Filmora software

• Open the Wondershare Filmora software and Click on the New Project icon on the window.
• After you have clicked on the New Project icon, our main workplace will be launched.
• Here you can see various options.
• To get started, we need to import our video clips to edit them.

• Here, you can see two ways to import your clips in Wondershare Filmora.

1. Shows you how to import by Right-Clicking on File and selecting the import media option.
2. Shows you to drag and drop the file from your main directory simply.

You can choose whatever suits you the best!

Step2Add your clips to your timeline

Now that we have imported our videos into the timeline, our next step will be to add our videos to the timeline.

• Simply click on the imported clips on the import window.
• Then drag it to the timeline below.
• Doing so will create a working timeline you can view and edit as you go along the editing process.

Step3Size the reference video to the original video

Now, remember that we recorded a five-second clip that we will use to create the masking effect. You will need to size it to the original video for that to work. Doing so is simple and will require you to take some easy steps.

• First, click on the clip.
• Then, when it is selected, move on to the tab above to choose the speed option from the bar.
• Here, you will also see options such as cropping, Green screen, and color.
• Choose the option of speed.
• Then, a drop-down tile will pop up. Here you can see different options available to speed up your video.

• You can speed up your video and slow it down.
• For now, we will have to slow it down.

Note: Slowing it down will increase the time of the video clip and allow you to match it with the original video clip.

Don’t worry about the speed, as the video is already empty, and there will be no distractions to disturb our editing.

Step4Add the masking effect

Now that we have our video aligned with the reference video we are using. Let’s move to the next step.

This step will try to remove the thread attached to the ball; otherwise, it will show in the video, and our effect will be ruined. However, before we do that, we will need to know what masking is.

What is the Masking effect in Wondershare Filmora?

Have you ever seen the behind-the-scenes of those big-budget movies? Then you might have seen the actors and the stunt workers hanging from big ropes performing stunts in front of green screens.

Well, the directors capture the video in real-time. But they can do those big stunts on TV with editing and CGI, and one of the effects is “Masking.”

The masking effect allows you to mask the object on the screen with a reference video. So that’s how the ropes attached to the stuntmen get removed in the original videos.

How to add a masking effect?

Although there are numerous ways to do that, the one we will use in this video is to remove the thread. For this, follow the below steps:

• Simply go to the effect icon that you can see in the bar above.
• In the effects bar, move to the utility tab.
• You will see a window showing you the many effects Wondershare Filmora provides you from default.
• Select the shape mask tile.
• Now drag and drop it on the timeline below.

Note: You must ensure the effect is applied to the main video, not the reference video.

• When you drag the effect into the main video, you will notice a transparent shape added to the video. This is your Mask.

Step5Edit the masking effect

You must hide the thread attached to the ball with the masking effect. To do this, follow the below guidelines:

• Double-click on the effect added to the main video.
• You will notice another window pop up on the import library.

Note: In the pop-up window, you will see the multiple options and edits you can apply to the masking effect, such as Transform, Compositing, Motion tracking, and stabilization.

• Scroll down on the window and notice a video effect tab.

In the effect tab, you will have multiple options, such as the shape mask, X, Y, and scale and blur strength options, as shown below.

• Now adjust the mask to hide the string. It may be easy to invert the mask.

Note: That the borders of the mask are blurred. But you can also change them by inverting the mask, which turns the borders and the space between them.

Remember the invisibility cloak from Harry Potter? It works just like that, only with a solid shape.

• Now use the X and Y options to move the mask anywhere in the video.

Step6Hide the sharp borders

You may notice the shape of borders that do not blend with the background. To blend the borders with the background, follow the steps below:

• Simply Double-click on the effect in the timeline.
• Then, in the editing tab, find out the blur strength option.

• Simply drag the bar to increase the blur strength.

Note: Please keep looking in the window on the right. Check and increase the blur strength until you are satisfied with the result.

• Lastly, click on OK when you are done.

Step7Creating the popup effect

Now, if you want your object to appear out of thin air, you must create that pop-up effect. You can create the pop-up effect in simple and easy steps, as shown below:

• First, drag the timeline dragger to the point where you want the prop or the ball to pop up.

Your presentation should be accurate and precise!

Imagine you were doing a “swoosh“ action, similar to swinging a wand. Now you want your object to appear at that time.

Split the Video:

• Drag the timeline dragger to that point.
• Now press Ctrl+B to split both videos.

Add Popup Effect:

The masking effect will be applied from the start. Our goal is to hide the masking effect before the ball pop-ups. For this, follow the below steps:

• Go into the setting by Double-Clicking the masking effect on the original video.
• Then move the mask over the ball instead of on the thread. Doing so would make the ball disappear.

Final Results:

• Lastly, click on Ok when done.

Play the clip from the start, and you will notice the ball popping up according to your action.

Congratulations! You did it. You are now able to fly objects with the power of your mind.

Following the abovementioned steps, you can control objects and make them fly in the air. The catch is that you will have to use Wondershare Filmora . But, of course, this is not a witchcraft school now.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

Well, there comes a time when one needs to make flying objects. Wondershare Filmora is an excellent tool that will allow you to add the masking effect to create the illusion of flying objects in the air.

The video quality at the end will only depend upon how clearly you show during the editing process. Try the above steps and enjoy the results!

Top 5 Tools to Help You Know More Freeze-Frame Video Editing Skills

Best 5 Tools to Help You Know More Freeze Frame Video Editing Skills

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

3 Best Motion Blur Plugins for Adobe After Effects

Adobe Effects is popularly used to add visual effects to video. Using this software, you can craft titles, intros, and outros for your videos and can also use this tool to add motion blur to your videos. If you want a more captivating and enhanced result, you can try the After Effects motion blur plugin, as discussed in this article. So, keep reading this guide to find out about the best motion blur plugins for Adobe After Effects.

1. RE: Vision Effects ReelSmart Motion Blur
2. CC Force Motion Blur
3. Pixel Motion Blur

• RSMB vs. CC Force vs. Pixel: Which is the Best Motion Blur Plugin?

Part 1: What is Motion Blur?

If you have captured a video where you want to show the movement of a certain train, car, or any object, motion blur can smooth it naturally. If you want to show the rapid movement of fast-moving objects, the motion blur effect can enhance this motion flawlessly.

Through this effect, you can smoothen your video by adding a realistic touch to it. By doing so, you can effectively put an emphasis on any particular area in the video. Many people add this effect to racing games to add a sense of speed realistically. Hence, the motion blur effect is commonly used by video creators and editors to prevent their videos from having a choppy or unprofessional look.

Part 2: 3 Motion Blur Plugins for Adobe Effects

Are you ready to use the best motion blur plugin of After Effects? In this section, we will discuss the top 3 motion blur plugins that can help you to create a motion blur effect in After Effects.

1. RE: Vision Effects ReelSmart Motion Blur

RSMB is a powerful motion blur plugin that contains various advanced features. By adding this motion blur plugin, you can instantly add a motion blur effect to your videos without any manual effort. Moreover, within this tool, you can also adjust the amount of blur that you want to apply to your video. You can also generate compelling effects using RSMB by blurring a sequence of motion, preferably.

Price: For After Effects, the regular version costs about $109.95. Whereas for the Pro version, the cost is $169.95.

Download: ReelSmart shows great compatibility with popular software such as Premiere Pro, After Effects, and many more. However, the subscription and download plans for each software are different. So, if you want to learn more about this plugin, you can navigate to its official website .

Key Features

• RSMB uses automatic tracking for each pixel so that the motion blur effect can be applied with great precision.
• You can adjust the amount and strength of motion blur through this plugin.
• With the help of advanced technology, RSMB can use the technique of object separation. Through this capability, the plugin can easily separate background and foreground efficiently.
• You can also use RSMB to track 360 footages for adding motion blur. Due to its advanced algorithms, it easily adds a motion blur effect to 360 videos by considering the sides, bottoms, tops, and edges.

What We Like

• RSMB can use spline guidance that can help you to animate shapes to display the movement of the objects. Thus, even if this plugin encounters tracking problems, you can always guide the object’s movement.
• Apart from adding a motion blur effect, you can also use RSMB to remove this blur effect without compromising the quality of your video.

What We Don’t Like

• A wide range of advanced features is only available in the pro version of RSMB. Thus, it can be expensive for beginner users.

2. CC Force Motion Blur

You can find the CC Force Motion Blur plugin under the time category of the Effects tab. By using this effect, you can add a natural sense of motion to your video easily. Once you have chosen the CC Force Motion Blur effect, you can add various keyframes to adjust the position and movement accordingly. Moreover, if you want to add this effect flawlessly, you should add an adjustment layer first. This will help you to add and adjust the CC Force Motion Blur effect in a perfect way.

Download: It’s a built-in option in After Effects that you can find easily. So, it’s free to use and does not require downloading anything.

Tutorial: To check how to use this After Effects motion blur plugin, you can see the instructions present in this video:

3. Pixel Motion Blur

Pixel Motion Blur can also help you in creating a dynamic blur effect in your video. After adding this effect, you can set different elements such as shutter control, shutter samples, and vector detail. If you decrease the shutter samples, the rendering speed will comparatively become faster. You can also set the shutter control to automatic, which will allow you to change the composition settings.

Download: You can find the Pixel Motion Blur plugin in the interface of After Effects. Thus, you can access it without any installation.

Tutorial: Do you want to try Pixel Motion Blur? Check the steps present in this video to discover how to use this special plugin without any hassle:

Part 3: RSMB vs. CC Force vs. Pixel: Which is the Best Motion Blur Plugin?

Do you want to learn the difference between all the discussed motion blur plugins for Adobe Effects? Read this section to find out the comparison between the top 3 best motion blur plugins.

1. Render time

ReelSmart Motion Blur vs. CC Force Motion Blur

The rendering speed of RSMB is way faster than CC Force Motion Blur. Especially if you are applying a motion blur effect to the animated or 3D video, CC Force Motion Blur can take excessive time to render. Thus, RSMB is a better choice as it provides fast rendering speed along with additional features.

CC Force Motion Blur vs. Pixel Motion Blur

As compared to Pixel Motion Blur, CC Force Motion Blur has a faster rendering speed. If you have a smaller number of samples while applying the CC Force Motion Blur, the rendering speed will become faster.

2. Price

RSMB is a paid plugin for Adobe After Effects and provides different subscription plans. On the other hand, CC Force Motion Blur and Pixel Motion Blur are the built-in features of After Effects. Thus, you can access them without any cost.

Conclusion

In this article, we have shed light on the top three motion blur plugins you can easily use on After Effects. Using any motion blur plugins, you can efficiently make the movement of your objects realistic and dynamic. These After Effects motion blur plugins will help you generate more professional results.

Part 1: What is Motion Blur?

If you have captured a video where you want to show the movement of a certain train, car, or any object, motion blur can smooth it naturally. If you want to show the rapid movement of fast-moving objects, the motion blur effect can enhance this motion flawlessly.

Through this effect, you can smoothen your video by adding a realistic touch to it. By doing so, you can effectively put an emphasis on any particular area in the video. Many people add this effect to racing games to add a sense of speed realistically. Hence, the motion blur effect is commonly used by video creators and editors to prevent their videos from having a choppy or unprofessional look.

Part 2: 3 Motion Blur Plugins for Adobe Effects

Are you ready to use the best motion blur plugin of After Effects? In this section, we will discuss the top 3 motion blur plugins that can help you to create a motion blur effect in After Effects.

1. RE: Vision Effects ReelSmart Motion Blur

RSMB is a powerful motion blur plugin that contains various advanced features. By adding this motion blur plugin, you can instantly add a motion blur effect to your videos without any manual effort. Moreover, within this tool, you can also adjust the amount of blur that you want to apply to your video. You can also generate compelling effects using RSMB by blurring a sequence of motion, preferably.

Price: For After Effects, the regular version costs about $109.95. Whereas for the Pro version, the cost is $169.95.

Download: ReelSmart shows great compatibility with popular software such as Premiere Pro, After Effects, and many more. However, the subscription and download plans for each software are different. So, if you want to learn more about this plugin, you can navigate to its official website .

Key Features

• RSMB uses automatic tracking for each pixel so that the motion blur effect can be applied with great precision.
• You can adjust the amount and strength of motion blur through this plugin.
• With the help of advanced technology, RSMB can use the technique of object separation. Through this capability, the plugin can easily separate background and foreground efficiently.
• You can also use RSMB to track 360 footages for adding motion blur. Due to its advanced algorithms, it easily adds a motion blur effect to 360 videos by considering the sides, bottoms, tops, and edges.

What We Like

• RSMB can use spline guidance that can help you to animate shapes to display the movement of the objects. Thus, even if this plugin encounters tracking problems, you can always guide the object’s movement.
• Apart from adding a motion blur effect, you can also use RSMB to remove this blur effect without compromising the quality of your video.

What We Don’t Like

• A wide range of advanced features is only available in the pro version of RSMB. Thus, it can be expensive for beginner users.

2. CC Force Motion Blur

You can find the CC Force Motion Blur plugin under the time category of the Effects tab. By using this effect, you can add a natural sense of motion to your video easily. Once you have chosen the CC Force Motion Blur effect, you can add various keyframes to adjust the position and movement accordingly. Moreover, if you want to add this effect flawlessly, you should add an adjustment layer first. This will help you to add and adjust the CC Force Motion Blur effect in a perfect way.

Download: It’s a built-in option in After Effects that you can find easily. So, it’s free to use and does not require downloading anything.

Tutorial: To check how to use this After Effects motion blur plugin, you can see the instructions present in this video:

3. Pixel Motion Blur

Pixel Motion Blur can also help you in creating a dynamic blur effect in your video. After adding this effect, you can set different elements such as shutter control, shutter samples, and vector detail. If you decrease the shutter samples, the rendering speed will comparatively become faster. You can also set the shutter control to automatic, which will allow you to change the composition settings.

Download: You can find the Pixel Motion Blur plugin in the interface of After Effects. Thus, you can access it without any installation.

Tutorial: Do you want to try Pixel Motion Blur? Check the steps present in this video to discover how to use this special plugin without any hassle:

Part 3: RSMB vs. CC Force vs. Pixel: Which is the Best Motion Blur Plugin?

Do you want to learn the difference between all the discussed motion blur plugins for Adobe Effects? Read this section to find out the comparison between the top 3 best motion blur plugins.

1. Render time

ReelSmart Motion Blur vs. CC Force Motion Blur

The rendering speed of RSMB is way faster than CC Force Motion Blur. Especially if you are applying a motion blur effect to the animated or 3D video, CC Force Motion Blur can take excessive time to render. Thus, RSMB is a better choice as it provides fast rendering speed along with additional features.

CC Force Motion Blur vs. Pixel Motion Blur

As compared to Pixel Motion Blur, CC Force Motion Blur has a faster rendering speed. If you have a smaller number of samples while applying the CC Force Motion Blur, the rendering speed will become faster.

2. Price

RSMB is a paid plugin for Adobe After Effects and provides different subscription plans. On the other hand, CC Force Motion Blur and Pixel Motion Blur are the built-in features of After Effects. Thus, you can access them without any cost.

Conclusion

In this article, we have shed light on the top three motion blur plugins you can easily use on After Effects. Using any motion blur plugins, you can efficiently make the movement of your objects realistic and dynamic. These After Effects motion blur plugins will help you generate more professional results.

A Full Guide to Funcall Voice Changer and Its Alternatives

Do you want to prank your friends? Everyone can agree that receiving a prank call is one of the world’s most annoying experiences. Still, you must admit that coming up with a great prank is a flex. If you want to make the next big prank film for TikTok or are just looking for something to do during a sleepover with your friends, you’ll need to have a plan before you pick up the phone. In this article, we will tell you how you can make prank calls easily with Funcall apps:

Try AI Voice Changer For Win 7 or later(64-bit)

Try AI Voice Changer For macOS 10.14 or later

Part 1: What’s Funcall App, and how to use it?

Making successful prank calls is very challenging. The Funcall - Voice Changer makes it incredibly easy to change your voice on a call and prank your family members and friends. You can call them and get their funny reactions.

You must input the target’s phone number and select whether you want the voice to be feminine, helium balloon, frightening, male, or regular sound. Funcall app also allows you to make international calls in over 150 countries on cell phones and landlines.

After installing the app, you will only have 30 seconds to play the prank. You can install other applications, view advertisements, or buy time directly through the app to get additional time. You are free to phone whatever number you like and speak in an artificial voice as long as you have the time. Additionally, you can include humorous sound effects like barking, farts, or gunfire. This voice-changing app is compatible with both Android and iPhone devices.

Follow these easy steps to use the Funcall app:

Step1Download

Go to the official website of Funcall apps and download it on your mobile device. To start the Funcall app, tap on the icon.

Step2Dial the Number

Dial the number of your friend or relative you want to prank and select the country.

Step3Select a Voice

At this point, pick the voice-altering sound you want to use. You can also add a background effect.

Step4Change Voice in Real Time

The call’s recipient will hear your customized voice rather than the original. To make the call more thrilling, you can add sound effects in addition to your altered voice.

Part 2: How to use the app for free?

Funcall is a premium software, and to use it, you must purchase one of its membership plans, which are reasonably priced. The first call on this app is free. You can earn more free minutes for prank calls by completing activities like watching advertising and downloading software.

Another option is to use Funcall MOD APK. It can be your best option if you’re seeking its free version, which allows you to enjoy an infinite number of minutes and an ad-free experience. You can use its hacked version to have free access to all of its paid features.

Part 3: Best alternatives to Funcall Voice Changer

Prank Dial

If you are looking for the best alternative to the Funcall app, you can use Prank Dial. With the help of the Prank Dial app, users can have fun while spending their free time making up to three random prank calls to friends and coworkers each day. You can press a call scenario to hear it and tap the heart to put it in your favourites so you can use it later.

The array of situations is sorted by category in the Prank Dial app, including “celebrities,” “angry,” “love,” “family prank calls,” etc. The history area displays all recent calls, including call date, caller id, scenario name, etc.

Fake Caller ID

If you want to make prank calls, make false caller ID, and have a good time, download this Fake Caller ID software. It has a very straightforward user interface that is free of any complications. You can easily prank or make fun of your friends by changing your voice pitch and caller ID.

This app gives two free calls each day and allows you to adjust your caller ID before you make the call, alter your voice while on the call, and record calls to listen to them later for fun.

MagicCall

For both Android and iOS, MagicCall is a fantastic tool to use as a voice-changing app when on the phone. It is an excellent app for making prank calls to pals and applying various effects. With multiple voice modifications and appended background effects, Magic Call is straightforward to use.

You can choose between Male, Robot, Female, Elderly Male, and Kid voices in the Voices area.

Prank Caller

With the help of the features in the Prank Caller app, you can access a massive library of prank call scripts directly from your smartphone’s screen and entertain your loved ones by using a different voice.

To try a new prank daily, you can browse the top prank call scripts and a list of all the available prank situations ranked by popularity.

FAQs

Can I use the Funcall app to make international calls?

You can use the Funcall app to make international calls in over 150 countries, including Asian, European, African, Middle Eastern regions, etc.

Can I use the Funcalls app while playing games?

No, you can’t use the Funcalls app while playing games. You can only use this app to change your voice during calls.

Can I change my voice during a call?

Yes, you can change your voice during calls. You can use Funcall apps or any alternatives to change your voice. However, we recommend you use the Funcall app because it is compatible with Android and iPhone.

What are the available voices on the Funcall app?

You can use a feminine, male, scary, helium, or a regular voice. This app also allows you to use various background sounds and effects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Try AI Voice Changer For Win 7 or later(64-bit)

Try AI Voice Changer For macOS 10.14 or later

Part 1: What’s Funcall App, and how to use it?

Making successful prank calls is very challenging. The Funcall - Voice Changer makes it incredibly easy to change your voice on a call and prank your family members and friends. You can call them and get their funny reactions.

You must input the target’s phone number and select whether you want the voice to be feminine, helium balloon, frightening, male, or regular sound. Funcall app also allows you to make international calls in over 150 countries on cell phones and landlines.

After installing the app, you will only have 30 seconds to play the prank. You can install other applications, view advertisements, or buy time directly through the app to get additional time. You are free to phone whatever number you like and speak in an artificial voice as long as you have the time. Additionally, you can include humorous sound effects like barking, farts, or gunfire. This voice-changing app is compatible with both Android and iPhone devices.

Follow these easy steps to use the Funcall app:

Step1Download

Go to the official website of Funcall apps and download it on your mobile device. To start the Funcall app, tap on the icon.

Step2Dial the Number

Dial the number of your friend or relative you want to prank and select the country.

Step3Select a Voice

At this point, pick the voice-altering sound you want to use. You can also add a background effect.

Step4Change Voice in Real Time

The call’s recipient will hear your customized voice rather than the original. To make the call more thrilling, you can add sound effects in addition to your altered voice.

Part 2: How to use the app for free?

Funcall is a premium software, and to use it, you must purchase one of its membership plans, which are reasonably priced. The first call on this app is free. You can earn more free minutes for prank calls by completing activities like watching advertising and downloading software.

Another option is to use Funcall MOD APK. It can be your best option if you’re seeking its free version, which allows you to enjoy an infinite number of minutes and an ad-free experience. You can use its hacked version to have free access to all of its paid features.

Part 3: Best alternatives to Funcall Voice Changer

Prank Dial

If you are looking for the best alternative to the Funcall app, you can use Prank Dial. With the help of the Prank Dial app, users can have fun while spending their free time making up to three random prank calls to friends and coworkers each day. You can press a call scenario to hear it and tap the heart to put it in your favourites so you can use it later.

The array of situations is sorted by category in the Prank Dial app, including “celebrities,” “angry,” “love,” “family prank calls,” etc. The history area displays all recent calls, including call date, caller id, scenario name, etc.

Fake Caller ID

If you want to make prank calls, make false caller ID, and have a good time, download this Fake Caller ID software. It has a very straightforward user interface that is free of any complications. You can easily prank or make fun of your friends by changing your voice pitch and caller ID.

This app gives two free calls each day and allows you to adjust your caller ID before you make the call, alter your voice while on the call, and record calls to listen to them later for fun.

MagicCall

For both Android and iOS, MagicCall is a fantastic tool to use as a voice-changing app when on the phone. It is an excellent app for making prank calls to pals and applying various effects. With multiple voice modifications and appended background effects, Magic Call is straightforward to use.

You can choose between Male, Robot, Female, Elderly Male, and Kid voices in the Voices area.

Prank Caller

With the help of the features in the Prank Caller app, you can access a massive library of prank call scripts directly from your smartphone’s screen and entertain your loved ones by using a different voice.

To try a new prank daily, you can browse the top prank call scripts and a list of all the available prank situations ranked by popularity.

FAQs

Can I use the Funcall app to make international calls?

You can use the Funcall app to make international calls in over 150 countries, including Asian, European, African, Middle Eastern regions, etc.

Can I use the Funcalls app while playing games?

No, you can’t use the Funcalls app while playing games. You can only use this app to change your voice during calls.

Can I change my voice during a call?

Yes, you can change your voice during calls. You can use Funcall apps or any alternatives to change your voice. However, we recommend you use the Funcall app because it is compatible with Android and iPhone.

What are the available voices on the Funcall app?

You can use a feminine, male, scary, helium, or a regular voice. This app also allows you to use various background sounds and effects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: