Discover the Essential Steps for Editing a Music Video in This Guide. Learn About Aspect Ratio and the First Cut Process to Create a Visually Captivating Video

Are you planning to edit your music video? Do you need on out how to edit your first music video draft? Editing a music video is a creative task but can be challenging.

One of the key elements of this process is selecting the aspect ratio and making the first cut. In this blog, we will explore these steps in detail, providing important tips and tricks. Whether you’re a beginner or an experienced editor, get ready to take your music video to the next level. Let’s get started.

Which software will you need?

As we have a lot of software in the market, we must select the right software for high-quality editing. Wondershare Filmora is an amazing video editing software. It offers a ton of video editing tools. You can add special effects, transitions, and more to make your music video captivating.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Guide To Selecting and Using the Best Braw Luts

Good content plays a huge role in this digital age, and making one has many different ingredients. LUTs are one of those secret ingredients that can take your content to new heights. They are essentially pre-defined color grading presets you can apply to your media files. Furthermore, these LUTs act as a guiding map to maintain your video’s color and tone.

In addition, there are many more in the world of LUTs, such as BRAW LUTs. BRAW (Blackmagic RAW) is a popular raw video format with excellent media quality. Such LUTs are specifically used to optimize and improve the colors of any BRAW footage. Moreover, their utility goes beyond just one software. There are many platforms to use these LUTs, such as Premiere Pro and Wondershare Filmora .

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Part 1: How to Apply BRAW LUTs on Premiere Pro?

If you want to apply BRAW LUTs Premier Pro to your videos, follow these steps. These simple steps will guide you on how to apply your LUTs using Premier Pro.

Step 1: Import and Set up Your Video

Open Premiere Pro and locate the “File” menu. Choose the “Import” option from the menu and select your files to import. Find your imported video in the “Project” panel and drag it into the timeline. In this way, your files will be imported.

Step 2: Adjust Blackmagic RAW Settings

Lead into the “Source” section and look for the “Effect Controls” tab. Inside the Effects Control tab, locate the Blackmagic RAW tab. Underneath the Blackmagic RAW tab, change the “Decode Using” settings to “Clip.” Furthermore, adjust the “Gamma” settings to “Blackmagic Design Extended Video.”

Step 3: Apply the LUT to Your Video Clips

To apply the LUT to all your video clips, right-click on the “Blackmagic RAW” tab. Click on the “Copy” option from the menu that appears. Now, select all your clips in the “Project” panel by holding the SHIFT key while clicking on each clip. Right-click on the selected clips and choose the “Paste” option to apply the LUT. Your Blackmagic LUT will now be applied to all the selected video files. After completing your edits save your file.

Empower your videos with a new mood using different LUTs. Filmora now offers 100+ top-quality 3D LUTs cover a broad range of scenarios. Transform your videos with Filmora’s powerful 3D LUTs.

Apply LUT on Videos Apply LUT on Videos Learn More

Try It Free >>

Part 2: Selecting the Best BRAW LUTs: A Look into The Details

Do you have so many BRAW to Rec709 LUTs options to choose from? You don’t need to waste your time in selecting a good one. Here is a list of some of the best BRAW LUTs that you can download.

1. Blackmagic BaseLUTs for BRAW – Gen 5 & Gen 4 Film

The Blackmagic BaseLUTs for BRAW – Gen 5 & Gen 4 Film powerful pack consists of two different Blackmagic LUTs. These LUTs are designed to enhance your video in remarkable ways. Furthermore, you can expect exceptional retention in the highlights. Additionally, these LUTs offer well-balanced saturation levels for your videos.

2. Cinematic BRAW BMPCC LUTs Gen5

Cinematic BRAW BMPCC LUTs Gen5 is a powerful set of seven different cinematic LUTs. With this pack of BRAW LUTs, you can take your video to the next level. It makes your videos feel larger than life with this LUT pack. Additionally, this pack brings cinematic flair and vibrant colors to create an epic visual experience. Besides this, each LUT comes with its unique color grading.

3. Blackmagic Braw Vivid LUTs

Blackmagic BRAW Vivid LUTs is a great pack to make your videos and images look professional. These LUTs work by exposing your images, revealing hidden details and textures. Furthermore, it increases saturation to make your videos pop. Besides this, it also highlights the red and green channels to make your media look more natural and prominent.

4. S20-F87 BRAW FILM

Experience the magic of the S20-F87 BRAW FILM LUT. Using this LUT pack, you can unlock a world of visual possibilities. Moreover, you can improve your videos’ overall look and feel with their soft, warm green tones. This LUT is designed to create a cinematic atmosphere and a professional look. Using this pack, you can impress your viewers with movie-like color grading.

5. Cine Vintage Nature LUT 22

Cine Vintage Nature LUT 22 is a remarkable LUT pack that transports your video back in time. It creates an old vintage look with a cinematic touch. With this pack, you can transform your modern videos into classic Hollywood movies. It beautifully enhances your videos’ colors, tones, and textures to add depth and emotion. Similarly, using this pack, you can recreate old-school cinematic videos.

6. JM- 15+ PREMIUM BMPCC BRAW LUTS

JM-15+ Premium BMPCC BRAW LUTs are the key to unlocking a cinematic feel in your videos. These powerful LUTs highlight colors, creating a cinematic experience. It is a pack of 15 premium cinematic-style LUTs. Additionally, you can darken colors, giving your videos a rich and dramatic look. Furthermore, these LUTs add depth and dimension to your videos by enhancing shadows and textures.

Part 3: An Alternative to Apply 3D LUTs to Videos: Wondershare Filmora

Wondershare Filmora is what you’re looking for if you want a professional video editing tool. It is an all-in-one video editing tool. From basic editing options to high-end professional video editing features, Filmora has it. You can make basic color corrections and adjustments with this tool. However, Filmora also offers more creative editing options for your videos.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Moreover, this tool has recently been updated and has many more options. With this LUT tool, you can apply different LUTs to enhance the mood of your videos. Apart from this, it has a library of 200+ LUTs to download. This extensive library allows you to choose different color grading presets according to your mood. Furthermore, its library also has other free media assets, ranging from over 10 billion.

Conclusion

LUTs are incredible tools to transform your ordinary content into something extraordinary. You can unleash your creativity with professional-looking content. Many LUTs, particularly BRAW LUTs, can be applied to your Blackmagic RAW footage. Take your videos to new heights with these tools by applying them using your favorite editing tools.

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Part 1: How to Apply BRAW LUTs on Premiere Pro?

If you want to apply BRAW LUTs Premier Pro to your videos, follow these steps. These simple steps will guide you on how to apply your LUTs using Premier Pro.

Step 1: Import and Set up Your Video

Open Premiere Pro and locate the “File” menu. Choose the “Import” option from the menu and select your files to import. Find your imported video in the “Project” panel and drag it into the timeline. In this way, your files will be imported.

Step 2: Adjust Blackmagic RAW Settings

Lead into the “Source” section and look for the “Effect Controls” tab. Inside the Effects Control tab, locate the Blackmagic RAW tab. Underneath the Blackmagic RAW tab, change the “Decode Using” settings to “Clip.” Furthermore, adjust the “Gamma” settings to “Blackmagic Design Extended Video.”

Step 3: Apply the LUT to Your Video Clips

To apply the LUT to all your video clips, right-click on the “Blackmagic RAW” tab. Click on the “Copy” option from the menu that appears. Now, select all your clips in the “Project” panel by holding the SHIFT key while clicking on each clip. Right-click on the selected clips and choose the “Paste” option to apply the LUT. Your Blackmagic LUT will now be applied to all the selected video files. After completing your edits save your file.

Empower your videos with a new mood using different LUTs. Filmora now offers 100+ top-quality 3D LUTs cover a broad range of scenarios. Transform your videos with Filmora’s powerful 3D LUTs.

Apply LUT on Videos Apply LUT on Videos Learn More

Try It Free >>

Part 2: Selecting the Best BRAW LUTs: A Look into The Details

Do you have so many BRAW to Rec709 LUTs options to choose from? You don’t need to waste your time in selecting a good one. Here is a list of some of the best BRAW LUTs that you can download.

1. Blackmagic BaseLUTs for BRAW – Gen 5 & Gen 4 Film

The Blackmagic BaseLUTs for BRAW – Gen 5 & Gen 4 Film powerful pack consists of two different Blackmagic LUTs. These LUTs are designed to enhance your video in remarkable ways. Furthermore, you can expect exceptional retention in the highlights. Additionally, these LUTs offer well-balanced saturation levels for your videos.

2. Cinematic BRAW BMPCC LUTs Gen5

Cinematic BRAW BMPCC LUTs Gen5 is a powerful set of seven different cinematic LUTs. With this pack of BRAW LUTs, you can take your video to the next level. It makes your videos feel larger than life with this LUT pack. Additionally, this pack brings cinematic flair and vibrant colors to create an epic visual experience. Besides this, each LUT comes with its unique color grading.

3. Blackmagic Braw Vivid LUTs

Blackmagic BRAW Vivid LUTs is a great pack to make your videos and images look professional. These LUTs work by exposing your images, revealing hidden details and textures. Furthermore, it increases saturation to make your videos pop. Besides this, it also highlights the red and green channels to make your media look more natural and prominent.

4. S20-F87 BRAW FILM

Experience the magic of the S20-F87 BRAW FILM LUT. Using this LUT pack, you can unlock a world of visual possibilities. Moreover, you can improve your videos’ overall look and feel with their soft, warm green tones. This LUT is designed to create a cinematic atmosphere and a professional look. Using this pack, you can impress your viewers with movie-like color grading.

5. Cine Vintage Nature LUT 22

Cine Vintage Nature LUT 22 is a remarkable LUT pack that transports your video back in time. It creates an old vintage look with a cinematic touch. With this pack, you can transform your modern videos into classic Hollywood movies. It beautifully enhances your videos’ colors, tones, and textures to add depth and emotion. Similarly, using this pack, you can recreate old-school cinematic videos.

6. JM- 15+ PREMIUM BMPCC BRAW LUTS

JM-15+ Premium BMPCC BRAW LUTs are the key to unlocking a cinematic feel in your videos. These powerful LUTs highlight colors, creating a cinematic experience. It is a pack of 15 premium cinematic-style LUTs. Additionally, you can darken colors, giving your videos a rich and dramatic look. Furthermore, these LUTs add depth and dimension to your videos by enhancing shadows and textures.

Part 3: An Alternative to Apply 3D LUTs to Videos: Wondershare Filmora

Wondershare Filmora is what you’re looking for if you want a professional video editing tool. It is an all-in-one video editing tool. From basic editing options to high-end professional video editing features, Filmora has it. You can make basic color corrections and adjustments with this tool. However, Filmora also offers more creative editing options for your videos.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Moreover, this tool has recently been updated and has many more options. With this LUT tool, you can apply different LUTs to enhance the mood of your videos. Apart from this, it has a library of 200+ LUTs to download. This extensive library allows you to choose different color grading presets according to your mood. Furthermore, its library also has other free media assets, ranging from over 10 billion.

Conclusion

LUTs are incredible tools to transform your ordinary content into something extraordinary. You can unleash your creativity with professional-looking content. Many LUTs, particularly BRAW LUTs, can be applied to your Blackmagic RAW footage. Take your videos to new heights with these tools by applying them using your favorite editing tools.

How to Speed Up and Slow Down a Video

Speeding and slowing down the speed of a video is a marvel in the video editing world. In the older days, this feat was accomplished only by the big-budget filming industry.

This article will dive into how you can access the modern-day features available in video editing software. From these features, you can alter the speed of your video easily. However, before we get into the step-by-step guide, let’s understand what fast and slow-mo videos are.

Part 1. What Are Fast and Slow Motion Videos?

As the name suggests, fast-motion videos are the ones that have been sped up from their average speed.

Similarly, slow-motion videos are the ones that have been slowed down from their average speed. The slow-motion effect, also known as the slow-mo effect, is widespread in modern cinema.

Now that we know what Fast and slow-motion videos are. Let’s understand their applications. Or how you can use them in your videos. Scroll below to learn more!

Part 2. Why Should You Change the Speed of Your Videos?

The answer to this question would be that it’s a personal creative decision that will allow you to make your videos more engaging.

Fast Motion Videos

Fast-motion videos are used in many areas of filming. For example, you can speed up your videos to create a funny video or shorten its length.

The fast-motion effect has many applications, such as cooking tutorial videos. For example, the step-by-step process of a cooking tutorial can be too long to fit into a single video. Or it could also help you in cases where you want to keep the length of the video short.

The fast motion of the steps will allow the viewer to quickly grasp the whole process without watching the entire video.

Slow Motion Videos

You can also slow down your videos to give the viewers a more detailed perspective of a scene. Or you can also create a slow-mo video that offers a general surreal vibe.

A famous example is in action films. The producers of the first Matrix film used the Slow-mo effect in the famous bullet dodging scene.

You may wonder how the film producers made the slow-mo effect. The technology at that time was less developed than the recent day. So, even you can create a slow-mo effect.

Before we get into the editing process, let’s first understand what you will need to change the speed of your videos!

Part 3. What Will You Need to Change the Speed of Your Videos?

You will need the following essentials to change the speed of a video:

1. Wondershare Filmora

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

To begin, you will need a good video editor. Wondershare Filmora is the best video editing software available. It has a very engaging system UI that allows inexperienced users to learn how to use it quickly. It also has a diverse collection of stock media. And not only that! It allows you to access reliable features to change the speed of a video.

You can change the speed of the video on Filmora by the speed adjustment panel or by the duration panel present above the timeline. It will adjust in just seconds with a few clicks. This feature makes Filmora more prior with editing tools.

2. Video Clips

Well, it is evident that to change the speed of your videos, you will need video clips. But there are a few things you can keep in mind before adjusting the speed of a video.

Note: Slowing down a video requires a shot at a higher frame rate. The greater the frame rate, the better will be the slow-mo quality. On the other hand, speeding up videos does not have a strict frame rate requirement.

Part 4. How Can You Change the Speed of Your Videos?

Here you will learn two ways in which you can change the speed of your videos. The two methods to change the speed of your video are mentioned:

• The speed adjustment panel.
• Duration panel settings.

Let’s get started with the editing process. The first method we will look into is the Speed Adjustment panel.

1. Change Speed With the Speed Adjustment Panel

The Speed Adjustment panel is the speed adjuster in the Wondershare Filmora software. This feature will give you a drag bar to adjust the speed of your video.

You can move the bar to the right to increase the speed of your video. Similarly, you can move it to the left to decrease the rate.

But before we use this feature, we will need to download the Filmora video editing software. So please scroll below to learn how to download it!

Step1 Download Filmora

First and foremost, you must have access to Filmora. For this, download Wondershare Filmora. Then, activate this app or software on your PC.

Step2 Import The Video Files

The next step after downloading Filmora is to import your video clips. To accomplish this, follow the steps outlined below:

• Locate and select the Import icon on the top left side of the Filmora Home Interface.
• It takes you to your computer’s library.
• Select the videos to be edited and then click OK.

You can also import the files by another method. After you have opened Filmora, you can restore the Filmora Window size and import by dragging and dropping the clips:

• Drag the cursor to select the video clips you want.
• Then, drop them in the Filmora import window.

Filmora supports various formats for your video clips. They include the Mp4, AVI, MOV, GIFs, and more.

After you have imported your video clips, add them to the timeline as shown below!

Step3 Add The Video Clips to The Timeline

After you’ve imported clips in the Import window, drag them onto the timeline. Follow the steps outlined below to accomplish this:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

Now that we have our video clips in the timeline, we can start adjusting the speed.

Step4 Open the Speed Adjustment Panel

The speed adjustment panel, or the Uniform Speed, is the feature of Filmora that allows you to change the speed of your video. For example, to open the Unifrom Speed panel, do as follows:

• Double-click on the video clip.
• In the pop-up column, scroll down till you see the Unifrom Speed option and click on it.
• The speed controls will be shown in the import window.

In the speed control panel, you can see the speed adjuster slider. A number will usually mark this at the end. This number tells you the current speed your video is calibrated in and how fast or slow the motion effects will be.

1.00 is always the average speed. 0.5 being half and 2.00 being double the average speed. To control the speed through the slider, you will need to do the following:

• To increase the speed: Type in the number you want your rate to be. Or, drag the slider to the right as you wish.
• To decrease the speed: Type in a number less than the standard 1.00, or you can drag the slider to the left as you wish.

The number of your speed can be an inconvenience if you have no prior experience. Instead, render the video and play it from the beginning with the changes that you made. It gives you a better idea of the speed of your video.

Step5 Detach The Audio

The corresponding audio also gets affected when you slow down or speed up a video. In this scenario, you can also choose to detach the audio beforehand. It allows you to maintain the original playback speed. To detach the audio, follow the steps as mentioned:

• Right-click on the video clip.
• In the pop-up column, scroll down to the Detach Audio option and click on it.

It will create an audio file in a separate audio tab in the timeline. You can adjust this audio according to your liking. You can edit the detached audio by:

• Double-click on the audio file.
• A settings menu will open in the import window.
• Adjust the Fade options for your Audio.
• Drag the Fade out slider to the right to Fade out your Audio.
• To Fade in your Audio, drag the Fade in slider to the right.

You can also remove the background noise and the pitch of the audio if you want. You can also replace the video’s original audio with a new one. Click on the audio file and press Del on the keyboard to delete it. To add new audio, do as mentioned ahead:

• Click on The Audio icon above the import window.
• Browse The Audio that matches the vibe of your video.
• Drag and drop it below your video clip.

Doing so would have created alternate audio for your video. Play the video from the start and confirm your changes.

Step6 Save Your Project

Saving a project on Filmora is straightforward. First, you need a few steps to proceed with it. Then, when you are done making changes to the video, simply follow as guided ahead, and you’ll be good to go.

• On the Filmora home interface, Go to > File > Save Project.

• Select the Library/Folder where you want your project to be stored.
• Type in the text box to change the name of your project.

• Click on Save.

That’s about it! You have now saved your project. Now let’s move on to export our video.

Step7 Export Your Video

After we are done with saving our project, we will now move on to export our video.

Note: Before we export our video, ensure everything is according to your wish. Play the final video again and confirm your changes.

You can export your video to many of the available video formats. And not only that, but you can also export your video to local files and a specific device. You can also export your video directly to YouTube, Vimeo, and DVD format.

To export your video, all you have to do is the following steps:

• Click on Export.
• Type in the Video name.
• Select the Directory you want your file to be stored in.
• Select the Video Format.
• Select the Resolution of your Video.

Note: If you want to export your video directly to Youtube or Vimeo, ensure you are logged in.

• Click on Export.

Wait till Wondershare Filmora finishes exporting your video. Then, another window will pop up for a reminder when the shipping is done.

These were the methods by which you can change the speed of your video using the Speed Adjustment panel. Now let’s move on to the following method to adjust the speed via the Duration panel.

2. Change Speed via the Duration Panel

The duration panel is one the most valuable features of Wondershare Filmora as it allows you to change the video speed by duration adjustment.

This feature is typically helpful when you have a space between video clips and want to fill it. By measuring the time between the two clips, you can adjust the duration of your video.

It will ultimately hasten the speed of your video. The hastening in rate will depend upon the gap. The smaller the gap, the faster the video will be. Similarly, the greater the gap is, the longer the video will be.

Apart from the Speed Adjustment Panel, the Duration Panel has the advantage of editing the speed of your video by simply typing in the text.

Step1 Import Video Clips to Timeline

After downloading Filmora, the next step is importing your video clips. To do so, follow the steps outlined below:

• Locate and click the Import icon in the upper left corner of the Filmora Home Interface.
• Choose the videos to be edited, then click OK.

Now that you have imported files into Filmora, you can add them to the Timeline. Notice the steps mentioned ahead:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

You can begin the editing process now that the clips are in the timeline.

Step2 Open The Duration Panel

The Duration Panel comes attached to the Unifrom Speed Panel. To access the Duration Panel, follow the steps ahead:

• Right-click on the video clip.
• In the pop column, scroll below to Unifrom Speed.

It will open the uniform speed panel in the import window. Below the speed of the controls, you can notice The Duration Panel.

Step3 Change The Speed of The Video

In The Duration Panel, you can see the average speed of your video clip. Now, if you want to reduce the speed of your video, you have to increase the duration of your video. Similarly, if you’re going to increase the speed of your video, you would have to decrease the duration.

Slow Down The Video

To slow down the video clip, follow the steps mentioned below:

• In The Duration Panel, Increase the time of the video.
• Type in a number bigger than the normal value

Note: If the average speed of the video is 00:01:00:00, increasing the value of the duration to 00:02:00:00 will reduce the speed of your video by half.

Speed Up The Video

To increase the speed of your video, follow as guided ahead:

• In The Duration Panel, decrease the time of the video.
• Type in a number smaller than the normal value

Note: If the normal video speed is 00:01:00:00, decreasing the value of the duration to 00:00:30:00 will increase the speed of your video by double.

Congratulations! You have successfully learned how to change the speed of your video by Filmora. Now, you can use both the Speed Adjustment Panel and The Duration Panel to adjust the speed of your video.

Conclusion

Changing the speed of your video can be helpful in many filming scenarios. Adjusting the speed in the older days was a marvel in the video editing industry. But the technology in the present day has allowed the typical user to edit the speed of a video.

By following the steps mentioned in this article, you can now change the speed of your video by Wondershare Filmora.

Free Download For macOS 10.14 or later

To begin, you will need a good video editor. Wondershare Filmora is the best video editing software available. It has a very engaging system UI that allows inexperienced users to learn how to use it quickly. It also has a diverse collection of stock media. And not only that! It allows you to access reliable features to change the speed of a video.

You can change the speed of the video on Filmora by the speed adjustment panel or by the duration panel present above the timeline. It will adjust in just seconds with a few clicks. This feature makes Filmora more prior with editing tools.

2. Video Clips

Well, it is evident that to change the speed of your videos, you will need video clips. But there are a few things you can keep in mind before adjusting the speed of a video.

Note: Slowing down a video requires a shot at a higher frame rate. The greater the frame rate, the better will be the slow-mo quality. On the other hand, speeding up videos does not have a strict frame rate requirement.

Part 4. How Can You Change the Speed of Your Videos?

Here you will learn two ways in which you can change the speed of your videos. The two methods to change the speed of your video are mentioned:

• The speed adjustment panel.
• Duration panel settings.

Let’s get started with the editing process. The first method we will look into is the Speed Adjustment panel.

1. Change Speed With the Speed Adjustment Panel

The Speed Adjustment panel is the speed adjuster in the Wondershare Filmora software. This feature will give you a drag bar to adjust the speed of your video.

You can move the bar to the right to increase the speed of your video. Similarly, you can move it to the left to decrease the rate.

But before we use this feature, we will need to download the Filmora video editing software. So please scroll below to learn how to download it!

Step1 Download Filmora

First and foremost, you must have access to Filmora. For this, download Wondershare Filmora. Then, activate this app or software on your PC.

Step2 Import The Video Files

The next step after downloading Filmora is to import your video clips. To accomplish this, follow the steps outlined below:

• Locate and select the Import icon on the top left side of the Filmora Home Interface.
• It takes you to your computer’s library.
• Select the videos to be edited and then click OK.

You can also import the files by another method. After you have opened Filmora, you can restore the Filmora Window size and import by dragging and dropping the clips:

• Drag the cursor to select the video clips you want.
• Then, drop them in the Filmora import window.

Filmora supports various formats for your video clips. They include the Mp4, AVI, MOV, GIFs, and more.

After you have imported your video clips, add them to the timeline as shown below!

Step3 Add The Video Clips to The Timeline

After you’ve imported clips in the Import window, drag them onto the timeline. Follow the steps outlined below to accomplish this:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

Now that we have our video clips in the timeline, we can start adjusting the speed.

Step4 Open the Speed Adjustment Panel

The speed adjustment panel, or the Uniform Speed, is the feature of Filmora that allows you to change the speed of your video. For example, to open the Unifrom Speed panel, do as follows:

• Double-click on the video clip.
• In the pop-up column, scroll down till you see the Unifrom Speed option and click on it.
• The speed controls will be shown in the import window.

In the speed control panel, you can see the speed adjuster slider. A number will usually mark this at the end. This number tells you the current speed your video is calibrated in and how fast or slow the motion effects will be.

1.00 is always the average speed. 0.5 being half and 2.00 being double the average speed. To control the speed through the slider, you will need to do the following:

• To increase the speed: Type in the number you want your rate to be. Or, drag the slider to the right as you wish.
• To decrease the speed: Type in a number less than the standard 1.00, or you can drag the slider to the left as you wish.

The number of your speed can be an inconvenience if you have no prior experience. Instead, render the video and play it from the beginning with the changes that you made. It gives you a better idea of the speed of your video.

Step5 Detach The Audio

The corresponding audio also gets affected when you slow down or speed up a video. In this scenario, you can also choose to detach the audio beforehand. It allows you to maintain the original playback speed. To detach the audio, follow the steps as mentioned:

• Right-click on the video clip.
• In the pop-up column, scroll down to the Detach Audio option and click on it.

It will create an audio file in a separate audio tab in the timeline. You can adjust this audio according to your liking. You can edit the detached audio by:

• Double-click on the audio file.
• A settings menu will open in the import window.
• Adjust the Fade options for your Audio.
• Drag the Fade out slider to the right to Fade out your Audio.
• To Fade in your Audio, drag the Fade in slider to the right.

You can also remove the background noise and the pitch of the audio if you want. You can also replace the video’s original audio with a new one. Click on the audio file and press Del on the keyboard to delete it. To add new audio, do as mentioned ahead:

• Click on The Audio icon above the import window.
• Browse The Audio that matches the vibe of your video.
• Drag and drop it below your video clip.

Doing so would have created alternate audio for your video. Play the video from the start and confirm your changes.

Step6 Save Your Project

Saving a project on Filmora is straightforward. First, you need a few steps to proceed with it. Then, when you are done making changes to the video, simply follow as guided ahead, and you’ll be good to go.

• On the Filmora home interface, Go to > File > Save Project.

• Select the Library/Folder where you want your project to be stored.
• Type in the text box to change the name of your project.

• Click on Save.

That’s about it! You have now saved your project. Now let’s move on to export our video.

Step7 Export Your Video

After we are done with saving our project, we will now move on to export our video.

Note: Before we export our video, ensure everything is according to your wish. Play the final video again and confirm your changes.

You can export your video to many of the available video formats. And not only that, but you can also export your video to local files and a specific device. You can also export your video directly to YouTube, Vimeo, and DVD format.

To export your video, all you have to do is the following steps:

• Click on Export.
• Type in the Video name.
• Select the Directory you want your file to be stored in.
• Select the Video Format.
• Select the Resolution of your Video.

Note: If you want to export your video directly to Youtube or Vimeo, ensure you are logged in.

• Click on Export.

Wait till Wondershare Filmora finishes exporting your video. Then, another window will pop up for a reminder when the shipping is done.

These were the methods by which you can change the speed of your video using the Speed Adjustment panel. Now let’s move on to the following method to adjust the speed via the Duration panel.

2. Change Speed via the Duration Panel

The duration panel is one the most valuable features of Wondershare Filmora as it allows you to change the video speed by duration adjustment.

This feature is typically helpful when you have a space between video clips and want to fill it. By measuring the time between the two clips, you can adjust the duration of your video.

It will ultimately hasten the speed of your video. The hastening in rate will depend upon the gap. The smaller the gap, the faster the video will be. Similarly, the greater the gap is, the longer the video will be.

Apart from the Speed Adjustment Panel, the Duration Panel has the advantage of editing the speed of your video by simply typing in the text.

Step1 Import Video Clips to Timeline

After downloading Filmora, the next step is importing your video clips. To do so, follow the steps outlined below:

• Locate and click the Import icon in the upper left corner of the Filmora Home Interface.
• Choose the videos to be edited, then click OK.

Now that you have imported files into Filmora, you can add them to the Timeline. Notice the steps mentioned ahead:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

You can begin the editing process now that the clips are in the timeline.

Step2 Open The Duration Panel

The Duration Panel comes attached to the Unifrom Speed Panel. To access the Duration Panel, follow the steps ahead:

• Right-click on the video clip.
• In the pop column, scroll below to Unifrom Speed.

It will open the uniform speed panel in the import window. Below the speed of the controls, you can notice The Duration Panel.

Step3 Change The Speed of The Video

In The Duration Panel, you can see the average speed of your video clip. Now, if you want to reduce the speed of your video, you have to increase the duration of your video. Similarly, if you’re going to increase the speed of your video, you would have to decrease the duration.

Slow Down The Video

To slow down the video clip, follow the steps mentioned below:

• In The Duration Panel, Increase the time of the video.
• Type in a number bigger than the normal value

Note: If the average speed of the video is 00:01:00:00, increasing the value of the duration to 00:02:00:00 will reduce the speed of your video by half.

Speed Up The Video

To increase the speed of your video, follow as guided ahead:

• In The Duration Panel, decrease the time of the video.
• Type in a number smaller than the normal value

Note: If the normal video speed is 00:01:00:00, decreasing the value of the duration to 00:00:30:00 will increase the speed of your video by double.

Congratulations! You have successfully learned how to change the speed of your video by Filmora. Now, you can use both the Speed Adjustment Panel and The Duration Panel to adjust the speed of your video.

Conclusion

Changing the speed of your video can be helpful in many filming scenarios. Adjusting the speed in the older days was a marvel in the video editing industry. But the technology in the present day has allowed the typical user to edit the speed of a video.

By following the steps mentioned in this article, you can now change the speed of your video by Wondershare Filmora.

Add Camera Shake to Video in Adobe After Effects

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’ve shot your video with good camera technique and shot it on a good camera; how can you make it look like you shot it on an old PXL 2000? Well, the answer is to add a little camera shake to the footage. If you’ve ever been to a theme park, then you’ve likely seen the effect of camera shake. Video camera shake can be a powerful tool for telling a story and creating an impactful scene. It helps to build suspense and make the video more realistic. This article will show you how to add camera shake to your videos using Adobe After Effects.

In this article

01 Why Do We Need To Add A Camera Shake Effect To The Video?

02 How to add camera shake to video in After Effects

03 Bonus! Camera Shake Presets for After Effects

Why Do We Need To Add A Camera Shake Effect To The Video?

Have you ever tried to add a simple camera shake effect to your videos? You know, those cool shake effects that you may have seen on an amateur or professional video on the web? Well, if you have, then you probably thought it was impossible. The camera shake effect is a technique applied to the clips where shaky camera movements cause the image to appear more cinematic and real. Applying a camera shake effect is to hide your flaws when shooting a video.

Camera shake is often mistaken for poor cinematography. It can enhance your video. For instance, if you’re filming something like a car chase or any other scene where there’s lots of movement and action, the inclusion of a camera shake can help make it more realistic.

A camera shake effect can be an excellent way of adding a sense of realism to your videos. Whether you’re making a video that’s meant to be taken as a real scene, such as one depicting a robbery, or one that’s supposed to be shot in a documentary style, such as making a movie, you can use this as an effective tool. You can consider adding camera shakes to your videos due to the following reasons:

• This camera shake effect makes your video more creative. If you want to make, your video different from those other businesses produce, adding this effect will be a good idea.
• Your audience will be able to relate better to your video if they’ve seen similar videos before.
• Adding a camera shake to your video will make it more interesting and engaging for your viewers.
• It’s a great way to mask any mistakes you might have made during the video production. After all, we aren’t perfect humans, so we can’t make perfect videos every time!”
• You can use camera shakes to simulate the feeling of being in an environment that is free from control (such as being on a boat).
• You can use them to create a sense of urgency for the viewer/audience by adding motion blur to the sequence.

How to add camera shake to video in After Effects

When it comes to video editing, knowing how to make a layer shake in After Effects is a very useful skill. Using it correctly can add subtle motion to a static frame, emphasize an important object, and even make a character quiver in fear! In this tutorial, you will learn how to effectively use the wiggle expression to affect a layer throughout the Composition.

Step 1. Select the layer you want to shake from your After Effects file

Suppose you have an image or video of an object and want to apply it to shake effect, then it is quite easy. Just follow the steps described below.

Step 2. Press the alt/option key, then click the stopwatch next to “position.”

You are adding an “expression” to the timeline when the position text turns red, and you begin typing. Using a coding language adapted from javascript, you can apply complex motion to layers.

By pressing the alt/option again on the stopwatch, you can edit your expression anytime-or by clicking the arrow beside “position” and then double-clicking the text in the timeline.

Step 3. Enter “Wiggle (3,8)” and adjust the settings accordingly

In this expression, the first number indicates the frequency of Wiggle – basically, how quickly it appears to tremble. Its amplitude is the second number, which indicates how far it moves. The numbers are adjustable as you wish. Layers will shake dramatically but slowly when they use Wiggle (2,40). The “Wiggle (10,3)” command makes a layer move quickly without too much movement in one direction.

Step 4. Adjust the frame rate of your Composition

In order to make the overall effect more “choppy,” you can reduce the frame rate of the video by going to Composition> Composition settings. After Effects uses a frame rate of 24.5, you can go as low as “8” if you want a choppy feel.

Your entire Composition will become choppier if you reduce the frame rate, so it might not be worth it if you have other moving elements in your Composition. Only adjust the frame rate of the layer containing the wiggling object if you want it to affect that layer.

Bonus! Camera Shake Presets for After Effects

Working with After Effects, you will have to shoot a movie that uses a camera shake. It is important to read the manual completely to take control of the camera. After Effects provides us with ready-made presets that we can quickly and easily. Here is a set of 5 camera shake presets that will help you create motion effects.

Normal Light 1

This preset gives you a light camera shake like a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Earthquake 1

This preset gives you a feel of camera shake, just like from an earthquake.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Normal Heavy 1

This preset provides you with a feel of a heavy camera shake from a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Telephoto Light 1

This preset gives you an effect of light camera shake from a telephoto lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Wide Heavy 1

You get a heavy camera shake from a wide lens with this preset.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Conclusion

● We hope that this tutorial gave you some new ideas for making your videos more interesting for your audience. It’s easy to add camera shake to your videos in Adobe After Effects. It’s a matter of getting all the right details right—that means it’s a matter of knowing all the right settings and controls, which we detail above. With this information and a little practice, you’ll be able to add that cinematic flair to your video footage in no time.

Try It Free Try It Free

So you’ve shot your video with good camera technique and shot it on a good camera; how can you make it look like you shot it on an old PXL 2000? Well, the answer is to add a little camera shake to the footage. If you’ve ever been to a theme park, then you’ve likely seen the effect of camera shake. Video camera shake can be a powerful tool for telling a story and creating an impactful scene. It helps to build suspense and make the video more realistic. This article will show you how to add camera shake to your videos using Adobe After Effects.

In this article

01 Why Do We Need To Add A Camera Shake Effect To The Video?

02 How to add camera shake to video in After Effects

03 Bonus! Camera Shake Presets for After Effects

Why Do We Need To Add A Camera Shake Effect To The Video?

Have you ever tried to add a simple camera shake effect to your videos? You know, those cool shake effects that you may have seen on an amateur or professional video on the web? Well, if you have, then you probably thought it was impossible. The camera shake effect is a technique applied to the clips where shaky camera movements cause the image to appear more cinematic and real. Applying a camera shake effect is to hide your flaws when shooting a video.

Camera shake is often mistaken for poor cinematography. It can enhance your video. For instance, if you’re filming something like a car chase or any other scene where there’s lots of movement and action, the inclusion of a camera shake can help make it more realistic.

A camera shake effect can be an excellent way of adding a sense of realism to your videos. Whether you’re making a video that’s meant to be taken as a real scene, such as one depicting a robbery, or one that’s supposed to be shot in a documentary style, such as making a movie, you can use this as an effective tool. You can consider adding camera shakes to your videos due to the following reasons:

• This camera shake effect makes your video more creative. If you want to make, your video different from those other businesses produce, adding this effect will be a good idea.
• Your audience will be able to relate better to your video if they’ve seen similar videos before.
• Adding a camera shake to your video will make it more interesting and engaging for your viewers.
• It’s a great way to mask any mistakes you might have made during the video production. After all, we aren’t perfect humans, so we can’t make perfect videos every time!”
• You can use camera shakes to simulate the feeling of being in an environment that is free from control (such as being on a boat).
• You can use them to create a sense of urgency for the viewer/audience by adding motion blur to the sequence.

How to add camera shake to video in After Effects

When it comes to video editing, knowing how to make a layer shake in After Effects is a very useful skill. Using it correctly can add subtle motion to a static frame, emphasize an important object, and even make a character quiver in fear! In this tutorial, you will learn how to effectively use the wiggle expression to affect a layer throughout the Composition.

Step 1. Select the layer you want to shake from your After Effects file

Suppose you have an image or video of an object and want to apply it to shake effect, then it is quite easy. Just follow the steps described below.

Step 2. Press the alt/option key, then click the stopwatch next to “position.”

You are adding an “expression” to the timeline when the position text turns red, and you begin typing. Using a coding language adapted from javascript, you can apply complex motion to layers.

By pressing the alt/option again on the stopwatch, you can edit your expression anytime-or by clicking the arrow beside “position” and then double-clicking the text in the timeline.

Step 3. Enter “Wiggle (3,8)” and adjust the settings accordingly

In this expression, the first number indicates the frequency of Wiggle – basically, how quickly it appears to tremble. Its amplitude is the second number, which indicates how far it moves. The numbers are adjustable as you wish. Layers will shake dramatically but slowly when they use Wiggle (2,40). The “Wiggle (10,3)” command makes a layer move quickly without too much movement in one direction.

Step 4. Adjust the frame rate of your Composition

In order to make the overall effect more “choppy,” you can reduce the frame rate of the video by going to Composition> Composition settings. After Effects uses a frame rate of 24.5, you can go as low as “8” if you want a choppy feel.

Your entire Composition will become choppier if you reduce the frame rate, so it might not be worth it if you have other moving elements in your Composition. Only adjust the frame rate of the layer containing the wiggling object if you want it to affect that layer.

Bonus! Camera Shake Presets for After Effects

Working with After Effects, you will have to shoot a movie that uses a camera shake. It is important to read the manual completely to take control of the camera. After Effects provides us with ready-made presets that we can quickly and easily. Here is a set of 5 camera shake presets that will help you create motion effects.

Normal Light 1

This preset gives you a light camera shake like a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Earthquake 1

This preset gives you a feel of camera shake, just like from an earthquake.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Normal Heavy 1

This preset provides you with a feel of a heavy camera shake from a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Telephoto Light 1

This preset gives you an effect of light camera shake from a telephoto lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Wide Heavy 1

You get a heavy camera shake from a wide lens with this preset.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Conclusion

● We hope that this tutorial gave you some new ideas for making your videos more interesting for your audience. It’s easy to add camera shake to your videos in Adobe After Effects. It’s a matter of getting all the right details right—that means it’s a matter of knowing all the right settings and controls, which we detail above. With this information and a little practice, you’ll be able to add that cinematic flair to your video footage in no time.

Try It Free Try It Free

So you’ve shot your video with good camera technique and shot it on a good camera; how can you make it look like you shot it on an old PXL 2000? Well, the answer is to add a little camera shake to the footage. If you’ve ever been to a theme park, then you’ve likely seen the effect of camera shake. Video camera shake can be a powerful tool for telling a story and creating an impactful scene. It helps to build suspense and make the video more realistic. This article will show you how to add camera shake to your videos using Adobe After Effects.

In this article

01 Why Do We Need To Add A Camera Shake Effect To The Video?

02 How to add camera shake to video in After Effects

03 Bonus! Camera Shake Presets for After Effects

Why Do We Need To Add A Camera Shake Effect To The Video?

Have you ever tried to add a simple camera shake effect to your videos? You know, those cool shake effects that you may have seen on an amateur or professional video on the web? Well, if you have, then you probably thought it was impossible. The camera shake effect is a technique applied to the clips where shaky camera movements cause the image to appear more cinematic and real. Applying a camera shake effect is to hide your flaws when shooting a video.

Camera shake is often mistaken for poor cinematography. It can enhance your video. For instance, if you’re filming something like a car chase or any other scene where there’s lots of movement and action, the inclusion of a camera shake can help make it more realistic.

A camera shake effect can be an excellent way of adding a sense of realism to your videos. Whether you’re making a video that’s meant to be taken as a real scene, such as one depicting a robbery, or one that’s supposed to be shot in a documentary style, such as making a movie, you can use this as an effective tool. You can consider adding camera shakes to your videos due to the following reasons:

• This camera shake effect makes your video more creative. If you want to make, your video different from those other businesses produce, adding this effect will be a good idea.
• Your audience will be able to relate better to your video if they’ve seen similar videos before.
• Adding a camera shake to your video will make it more interesting and engaging for your viewers.
• It’s a great way to mask any mistakes you might have made during the video production. After all, we aren’t perfect humans, so we can’t make perfect videos every time!”
• You can use camera shakes to simulate the feeling of being in an environment that is free from control (such as being on a boat).
• You can use them to create a sense of urgency for the viewer/audience by adding motion blur to the sequence.

How to add camera shake to video in After Effects

When it comes to video editing, knowing how to make a layer shake in After Effects is a very useful skill. Using it correctly can add subtle motion to a static frame, emphasize an important object, and even make a character quiver in fear! In this tutorial, you will learn how to effectively use the wiggle expression to affect a layer throughout the Composition.

Step 1. Select the layer you want to shake from your After Effects file

Suppose you have an image or video of an object and want to apply it to shake effect, then it is quite easy. Just follow the steps described below.

Step 2. Press the alt/option key, then click the stopwatch next to “position.”

You are adding an “expression” to the timeline when the position text turns red, and you begin typing. Using a coding language adapted from javascript, you can apply complex motion to layers.

By pressing the alt/option again on the stopwatch, you can edit your expression anytime-or by clicking the arrow beside “position” and then double-clicking the text in the timeline.

Step 3. Enter “Wiggle (3,8)” and adjust the settings accordingly

In this expression, the first number indicates the frequency of Wiggle – basically, how quickly it appears to tremble. Its amplitude is the second number, which indicates how far it moves. The numbers are adjustable as you wish. Layers will shake dramatically but slowly when they use Wiggle (2,40). The “Wiggle (10,3)” command makes a layer move quickly without too much movement in one direction.

Step 4. Adjust the frame rate of your Composition

In order to make the overall effect more “choppy,” you can reduce the frame rate of the video by going to Composition> Composition settings. After Effects uses a frame rate of 24.5, you can go as low as “8” if you want a choppy feel.

Your entire Composition will become choppier if you reduce the frame rate, so it might not be worth it if you have other moving elements in your Composition. Only adjust the frame rate of the layer containing the wiggling object if you want it to affect that layer.

Bonus! Camera Shake Presets for After Effects

Working with After Effects, you will have to shoot a movie that uses a camera shake. It is important to read the manual completely to take control of the camera. After Effects provides us with ready-made presets that we can quickly and easily. Here is a set of 5 camera shake presets that will help you create motion effects.

Normal Light 1

This preset gives you a light camera shake like a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Earthquake 1

This preset gives you a feel of camera shake, just like from an earthquake.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Normal Heavy 1

This preset provides you with a feel of a heavy camera shake from a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Telephoto Light 1

This preset gives you an effect of light camera shake from a telephoto lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Wide Heavy 1

You get a heavy camera shake from a wide lens with this preset.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Conclusion

● We hope that this tutorial gave you some new ideas for making your videos more interesting for your audience. It’s easy to add camera shake to your videos in Adobe After Effects. It’s a matter of getting all the right details right—that means it’s a matter of knowing all the right settings and controls, which we detail above. With this information and a little practice, you’ll be able to add that cinematic flair to your video footage in no time.

Try It Free Try It Free

So you’ve shot your video with good camera technique and shot it on a good camera; how can you make it look like you shot it on an old PXL 2000? Well, the answer is to add a little camera shake to the footage. If you’ve ever been to a theme park, then you’ve likely seen the effect of camera shake. Video camera shake can be a powerful tool for telling a story and creating an impactful scene. It helps to build suspense and make the video more realistic. This article will show you how to add camera shake to your videos using Adobe After Effects.

In this article

01 Why Do We Need To Add A Camera Shake Effect To The Video?

02 How to add camera shake to video in After Effects

03 Bonus! Camera Shake Presets for After Effects

Why Do We Need To Add A Camera Shake Effect To The Video?

Have you ever tried to add a simple camera shake effect to your videos? You know, those cool shake effects that you may have seen on an amateur or professional video on the web? Well, if you have, then you probably thought it was impossible. The camera shake effect is a technique applied to the clips where shaky camera movements cause the image to appear more cinematic and real. Applying a camera shake effect is to hide your flaws when shooting a video.

Camera shake is often mistaken for poor cinematography. It can enhance your video. For instance, if you’re filming something like a car chase or any other scene where there’s lots of movement and action, the inclusion of a camera shake can help make it more realistic.

A camera shake effect can be an excellent way of adding a sense of realism to your videos. Whether you’re making a video that’s meant to be taken as a real scene, such as one depicting a robbery, or one that’s supposed to be shot in a documentary style, such as making a movie, you can use this as an effective tool. You can consider adding camera shakes to your videos due to the following reasons:

• This camera shake effect makes your video more creative. If you want to make, your video different from those other businesses produce, adding this effect will be a good idea.
• Your audience will be able to relate better to your video if they’ve seen similar videos before.
• Adding a camera shake to your video will make it more interesting and engaging for your viewers.
• It’s a great way to mask any mistakes you might have made during the video production. After all, we aren’t perfect humans, so we can’t make perfect videos every time!”
• You can use camera shakes to simulate the feeling of being in an environment that is free from control (such as being on a boat).
• You can use them to create a sense of urgency for the viewer/audience by adding motion blur to the sequence.

How to add camera shake to video in After Effects

When it comes to video editing, knowing how to make a layer shake in After Effects is a very useful skill. Using it correctly can add subtle motion to a static frame, emphasize an important object, and even make a character quiver in fear! In this tutorial, you will learn how to effectively use the wiggle expression to affect a layer throughout the Composition.

Step 1. Select the layer you want to shake from your After Effects file

Suppose you have an image or video of an object and want to apply it to shake effect, then it is quite easy. Just follow the steps described below.

Step 2. Press the alt/option key, then click the stopwatch next to “position.”

You are adding an “expression” to the timeline when the position text turns red, and you begin typing. Using a coding language adapted from javascript, you can apply complex motion to layers.

By pressing the alt/option again on the stopwatch, you can edit your expression anytime-or by clicking the arrow beside “position” and then double-clicking the text in the timeline.

Step 3. Enter “Wiggle (3,8)” and adjust the settings accordingly

In this expression, the first number indicates the frequency of Wiggle – basically, how quickly it appears to tremble. Its amplitude is the second number, which indicates how far it moves. The numbers are adjustable as you wish. Layers will shake dramatically but slowly when they use Wiggle (2,40). The “Wiggle (10,3)” command makes a layer move quickly without too much movement in one direction.

Step 4. Adjust the frame rate of your Composition

In order to make the overall effect more “choppy,” you can reduce the frame rate of the video by going to Composition> Composition settings. After Effects uses a frame rate of 24.5, you can go as low as “8” if you want a choppy feel.

Your entire Composition will become choppier if you reduce the frame rate, so it might not be worth it if you have other moving elements in your Composition. Only adjust the frame rate of the layer containing the wiggling object if you want it to affect that layer.

Bonus! Camera Shake Presets for After Effects

Working with After Effects, you will have to shoot a movie that uses a camera shake. It is important to read the manual completely to take control of the camera. After Effects provides us with ready-made presets that we can quickly and easily. Here is a set of 5 camera shake presets that will help you create motion effects.

Normal Light 1

This preset gives you a light camera shake like a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Earthquake 1

This preset gives you a feel of camera shake, just like from an earthquake.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Normal Heavy 1

This preset provides you with a feel of a heavy camera shake from a normal lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fps

Telephoto Light 1

This preset gives you an effect of light camera shake from a telephoto lens.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Wide Heavy 1

You get a heavy camera shake from a wide lens with this preset.
Resolution: 2K (2048x1080) and 4K (4096x2160)
Frame Rate: 29.97fp

Conclusion

● We hope that this tutorial gave you some new ideas for making your videos more interesting for your audience. It’s easy to add camera shake to your videos in Adobe After Effects. It’s a matter of getting all the right details right—that means it’s a matter of knowing all the right settings and controls, which we detail above. With this information and a little practice, you’ll be able to add that cinematic flair to your video footage in no time.

Also read: