2024 Approved How to Create Chroma Key Written Text Effects in Filmora

2024 Approved How to Create Chroma Key Written Text Effects in Filmora

Chloe Lv12

How to Create Chroma Key Written Text Effects in Filmora

Did you know it only takes a few clicks to key out the color in Filmora? It means that you can add green screen effects to many other objects. This article will show a cool chroma key effect you can try using written text.

Part 1. What Is Chroma Key Text Effect?

Composing of the chroma key effect is widely used in the gaming and newscasting industries. In this technique, you can make layering images and videos for the text together based on color hues.

chroma key text effect

Video editors can eliminate the basis from a picture by automatically choosing a certain hue in post-production. An interactive animation results by adding different color schemes; it’s an easy way to make 3D motion videos.

To make the effects on text, we have to film the subject writing on white paper. For this, follow the below instructions:

Part 2. Filming Tips for Written Texts

To write a key text before adding the chroma effect, we have to film the writing process to understand your next project better. You can create your own by following these tips. We are just concluding a single example here.

Tip 1. A Pen and a White Paper

We need blank white paper with no boundaries and lines for writing a text. Because the chroma effect will embellish the other lines if present on paper. Make sure to choose a prominent color for writing a text.

We are using a purple color pen here for writing an essential text to make it more prominent, as shown below:

purple color pen on white paper

It all depends upon the contrast, and you can choose another color too but ensure that it’s more apparent during filming.

Tip 2. Different Color Paper

There are many chances that you don’t have only white paper in your studio, or your requirement is not going with a blank white sheet. Then you don’t need to worry because you can use different color papers too.

But always try to use clearer paper and a prominent pen or highlighter. See the below example of a different color paper with a different highlighter.

different color paper with different markers

Note: Ensure that the colored pens have good contrast with colored paper. Don’t use dull color pens with bright color paper.

Tip 3. Camera Angles

While filming a writing process for a video, you have to take care of the alignment of the camera. First, ensure the camera is at a suitable angle so it will not block the writing letters from the left side.

Sometimes, the writer’s hand blocks the letters on the left side during writing. Take note of this tip during filming a professional video, as shown below.

don't block the letters from the left side

After checking the alignment of the camera, it’s time to look at what size we have to use for writing!

Tip 4. Larger Size of Letters

As we already said about the prominence of written text, we have to follow one more instruction related to the structure of the letters. Use the larger size and bold words when writing from a highlighter.

It is because the effect we insert during editing will be more standing and give a professional look to the video.

the larger size of the written key text

Note: You can create more shots till you get the right angle for a final video. Just focus on the camera alignment and highlighted words, then it will be all set.

After filming all the clips, you must edit those shots on the Filmora to get the chroma effect. Scroll more to get the step-by-step process!

Part 3. Editing the Chroma Key Text With Filmora

We need software that will give great setting choices and stock videos for a more professional look. For this, Wondershare Filmora will work more than a robot and give high-resolution results. To do the editing process on Filmora, follow the steps below and enjoy yourself with your followers.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora

Launch Wondershare Filmora on your PC or Mac after downloading.

Note: If you want to enjoy its unlimited effect, you get its premium version quickly.

interface of wondershare filmora

Step2 Import the clips to the Filmora

First, import the best footage into the filmora which you have shot. Ensure that the clip should have the best recording angle and that every word will be prominent on the page.

For this, click on Import Media and choose from the PC library what you want to edit.

import the clip to the filmora

Step3 Drag the clip to the timeline

Drag and drop the clip into the timeline from the import section. If you have more clips, choose first according to your script.

Add the text-written clip into the second video track because we have to insert the background into the first video track later.

drag the clip to the timeline

After inserting the clip into the timeline, it’s time to edit it. For this, keep following the below-mentioned steps!

Step4 Chroma key settings

To edit the chroma key, you need to open the settings. For this, follow the below instructions:

  • First, double-click on the clip in the timeline of the Filmora.
  • Then, the setting section of the video will pop up at the top left side.
  • Mark the tick in front of the Chroma Key section, and it will show the list of different features as shown below.

chroma key setting of the clip in filmora

Step5 Color key out

To key out the specific color for changing its background, you have to perform the following actions:

  • First, find the Select color option in the settings of the clip.
  • Then click on the color dropper in front of the color tab.
  • After that, pick the color dropper and move it on the video to select the color from the text.

Note: Ensure to select the color from the middle of the text for better key-out accuracy.

color key out from the text

You have to adjust the size and thickness after selecting the key-out. For this, follow the next step!

Step6 Adjust the settings

To adjust the Chroma Key’s settings, set the offset, tolerance, edge thickness, and edge feather. Increase or decrease according to your range and that suits you the best.

Then click on Alpha Channel to mark the tick in front of the option. It is due to that chroma key effects will be more clearly shown.

adjust the chroma key settings in the filmora

Now, it’s time to set the background after fixing all the settings of the chroma key effect. To perform this, scroll more to get to the next step.

Step7 Import background clips

You have to add an excellent motion background in the handwritten text video. For this, you must first import the background clip into the filmora. Then, click on Import Media and choose what you want from your PC.

import background clip into the filmora

Step8 Add a background clip to the timeline

After importing the background clip, now drag and drop the clip into the timeline. Finally, add the background clip to the first video track at the bottom.

add a background clip into the timeline of filmora

Step9 Turn off the alpha channel

The last step is merging the background clip with the first clip. For this, follow the below guidelines:

  • First, double-click on the handwritten text video.
  • It will show the settings section at the top left corner.
  • Find the chroma key section and turn Alpha Channel

turn the alpha channel off

Final Results

You have all done with the steps and got such a fascinating result. Following the above tricks, you can easily make your vlogs and daily videos more professional and creative. Make sure to add a great and colorful background clip.

final video after adding chroma key written text effect

You can also use any other motion video of scenes rather than colorful videos to give a striking look.

Conclusion

Create more attractive looks and share them with your subscribers. Mainly, vloggers can attract many viewers by making the introductory part with this effect. Then, choose hundreds of other videos from the stock media and create different looks daily.

See how you can get editing tricks on Wondershare Filmora and use them in a few clicks to get an attractive look!

Tip 3. Camera Angles

While filming a writing process for a video, you have to take care of the alignment of the camera. First, ensure the camera is at a suitable angle so it will not block the writing letters from the left side.

Sometimes, the writer’s hand blocks the letters on the left side during writing. Take note of this tip during filming a professional video, as shown below.

don't block the letters from the left side

After checking the alignment of the camera, it’s time to look at what size we have to use for writing!

Tip 4. Larger Size of Letters

As we already said about the prominence of written text, we have to follow one more instruction related to the structure of the letters. Use the larger size and bold words when writing from a highlighter.

It is because the effect we insert during editing will be more standing and give a professional look to the video.

the larger size of the written key text

Note: You can create more shots till you get the right angle for a final video. Just focus on the camera alignment and highlighted words, then it will be all set.

After filming all the clips, you must edit those shots on the Filmora to get the chroma effect. Scroll more to get the step-by-step process!

Part 3. Editing the Chroma Key Text With Filmora

We need software that will give great setting choices and stock videos for a more professional look. For this, Wondershare Filmora will work more than a robot and give high-resolution results. To do the editing process on Filmora, follow the steps below and enjoy yourself with your followers.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora

Launch Wondershare Filmora on your PC or Mac after downloading.

Note: If you want to enjoy its unlimited effect, you get its premium version quickly.

interface of wondershare filmora

Step2 Import the clips to the Filmora

First, import the best footage into the filmora which you have shot. Ensure that the clip should have the best recording angle and that every word will be prominent on the page.

For this, click on Import Media and choose from the PC library what you want to edit.

import the clip to the filmora

Step3 Drag the clip to the timeline

Drag and drop the clip into the timeline from the import section. If you have more clips, choose first according to your script.

Add the text-written clip into the second video track because we have to insert the background into the first video track later.

drag the clip to the timeline

After inserting the clip into the timeline, it’s time to edit it. For this, keep following the below-mentioned steps!

Step4 Chroma key settings

To edit the chroma key, you need to open the settings. For this, follow the below instructions:

  • First, double-click on the clip in the timeline of the Filmora.
  • Then, the setting section of the video will pop up at the top left side.
  • Mark the tick in front of the Chroma Key section, and it will show the list of different features as shown below.

chroma key setting of the clip in filmora

Step5 Color key out

To key out the specific color for changing its background, you have to perform the following actions:

  • First, find the Select color option in the settings of the clip.
  • Then click on the color dropper in front of the color tab.
  • After that, pick the color dropper and move it on the video to select the color from the text.

Note: Ensure to select the color from the middle of the text for better key-out accuracy.

color key out from the text

You have to adjust the size and thickness after selecting the key-out. For this, follow the next step!

Step6 Adjust the settings

To adjust the Chroma Key’s settings, set the offset, tolerance, edge thickness, and edge feather. Increase or decrease according to your range and that suits you the best.

Then click on Alpha Channel to mark the tick in front of the option. It is due to that chroma key effects will be more clearly shown.

adjust the chroma key settings in the filmora

Now, it’s time to set the background after fixing all the settings of the chroma key effect. To perform this, scroll more to get to the next step.

Step7 Import background clips

You have to add an excellent motion background in the handwritten text video. For this, you must first import the background clip into the filmora. Then, click on Import Media and choose what you want from your PC.

import background clip into the filmora

Step8 Add a background clip to the timeline

After importing the background clip, now drag and drop the clip into the timeline. Finally, add the background clip to the first video track at the bottom.

add a background clip into the timeline of filmora

Step9 Turn off the alpha channel

The last step is merging the background clip with the first clip. For this, follow the below guidelines:

  • First, double-click on the handwritten text video.
  • It will show the settings section at the top left corner.
  • Find the chroma key section and turn Alpha Channel

turn the alpha channel off

Final Results

You have all done with the steps and got such a fascinating result. Following the above tricks, you can easily make your vlogs and daily videos more professional and creative. Make sure to add a great and colorful background clip.

final video after adding chroma key written text effect

You can also use any other motion video of scenes rather than colorful videos to give a striking look.

Conclusion

Create more attractive looks and share them with your subscribers. Mainly, vloggers can attract many viewers by making the introductory part with this effect. Then, choose hundreds of other videos from the stock media and create different looks daily.

See how you can get editing tricks on Wondershare Filmora and use them in a few clicks to get an attractive look!

Unlock Your Video Editing Potential With Wondershare Filmora

Are you looking to make a cool, fun video for a special occasion? Look no further than Wondershare Filmora.

With a range of video editing tools and effects, you can easily create stunning visuals and captivating stories. Whether you are making a video for a special occasion or a social media post, Filmora has the features to help you create the perfect video.

In this article, we will discuss the benefits of using Filmora and look further into some of its main features such as split screens, LUTs, keyframes, and more. So, let your creative juices flow and start making awesome videos with Wondershare Filmora today!

Why Choose Wondershare Filmora?

Wondershare Filmora is one of the most affordable video editors available in the market, with features that are usually very expensive to use. This tool is not only available for desktops but also for mobiles. So, you can also create content on the go!

wondershare filmora

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Let’s dig a little deeper to see how Filmora can benefit you.

Benefits of Using Filmora

Filmora, as compared to its contestants, has much more to offer. From a range of tools and effects to an easy-to-use interface to affordability, Filmora has it all!

1.Variety of Video Editing Tools and Effects

Wondershare Filmora has a variety of video editing tools and effects. Some of the advanced editing features to spice up your videos are available such as cropping, trimming, and adjusting the audio, as well as adding motion graphics, motion tracking, and more.

Furthermore, users can also access a library of royalty-free video clips, overlays, and sound effects to add the perfect touch to their videos.

2.Easy-to-Use Interface

Whether you are a beginner or a pro, Filmora’s easy-to-use interface will be your favorite! It is simple, plain, and easy to understand.

With its intuitive interface, you can also quickly and easily customize your videos with an array of special effects, including transitions, text, and music.

3.Affordable

Last but not least, the greatest catch of Wondershare Filmora is its affordability. With the wide variety of features that it offers, it has reasonable prices to offer.

With packages starting at just $49.99 per year to $79.99 perpetual, you can avail a multitude of features that update regularly and with every new version of Filmora. With these packages, you can get around 1GB of Filmora cloud storage.

So, what are you waiting for? Download Filmora now. And don’t worry; we have got you covered with some great tips to begin your Filmora journey.

Some Stunning Features in Filmora

Although Filmora is easy to use, and you can explore it on your own, it never hurts to know a few features before you dive in.

1.Split Screen Presets

Starting with split screens that are a great way of enhancing your videos. You can show multiple videos side by side, which gives a very chic look to your overall video. Here’s how to do it in Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Start a new project

Launch Filmora and click on “New Project.”

wondershare filmora interface

Step2Choose a split screen preset

On the top, go to “Templates” and then “Split Screen.”

split screen templates

Choose the preset that you need. You can also preview the layout.

Step3Add to timeline

Add the chosen preset to the timeline track.

adding split screen to timeline

Step4Add videos to the layout

Import media from your library or use stock media to add videos to your layout. Drag and drop your media on the layout.

add videos to the layout

Step5Edit the split screen

Once you have all the videos added to the layout, double-click on the split screen in the timeline panel. The edit options will appear on the left.

edit the split screen

Choose how you want to edit your video and then save it.

2.Filters and LUTs

Another cool feature that Filmora offers is Filters and LUTs. In order to do so, follow these simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Add media

Import all the video or audio files that you want to edit to the media section.

import media file

Step2Go to “Filter & LUT”

Under the “Effects” tab, go to “Filter & LUT.” Choose the LUT that you want to add to your video.

browse different luts

Step3Add the LUT to your video

Add the LUT to your timeline by drag-n-drop.

add lut to your video

Drag it to adjust it according to your video. In order to adjust the strength of the LUT, double-click on it.

edit the opacity of the lut

You can adjust the opacity of the LUT according to your preference. You can make it as soft or as strong as you want.

3.Animated Keyframes

Moving on, another one of the cool Filmora features is keyframing. Filmora allows you to add animated keyframes in your videos to add moving text or such effects. Follow the steps below to do so.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Add videos to the timeline

Add a video to your timeline and double-click on it to open up the editing options. Go to the “Animation” tab.

add video to the timeline panel

Here, you have different preset animations that you can use for your video.

Step2Add a keyframe

Add your chosen preset and hit play. You will see how that keyframe works. You can also add multiple keyframes to your video to make it look cooler.

add a keyframe

Once you play the video, it will look like this.

the final look of the animated keyframe

This is an easy way of making intros or outros of your videos.

4.Detach Audio

Suppose you have a video where you like the audio and want to use it for another video. How would you separate the audio? This is where the Detach Audio feature comes in.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Add video to the timeline

Drag and drop the video on the timeline.

add video to the timeline panel

Step2Detach audio

To separate the audio, right-click on the video and choose “Detach Audio.” The audio track will appear separately in the timeline. You can then use it as you wish.

detach the audio

5.Blur Effects

Next up, we have the feature of blurring your video or the background in your video. To do so, follow these simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Go to the effects tab

After adding the video to your timeline, go to the Effects tab on top.

go to the effects tab

Step2Search for blur effects

In the search bar, type “blur.” You will see several blur effects. Choose any effect and see a preview of it.

search for the blur effects

Step3Add effects to videos

Add the chosen effect to your video. Then adjust its position accordingly. Double-click on the blur effect in the timeline panel to change its size and opacity.

adjust the chosen blur effect

These are some of the most amazing features that we have listed here. FYI, this is just the brink of the iceberg. There is a whole lot more that Filmora has to offer.

Final Words

If you’re looking for a simple and intuitive video editing platform to help you create stunning videos, look no further than Filmora. It is packed with powerful features that let you turn your raw footage into captivating movies in no time.

With its user-friendly design, you can easily access all the tools you need to make amazing videos, no matter your skill level. Try Filmora today and create unforgettable videos that will leave viewers in awe.

Free Download For macOS 10.14 or later

Let’s dig a little deeper to see how Filmora can benefit you.

Benefits of Using Filmora

Filmora, as compared to its contestants, has much more to offer. From a range of tools and effects to an easy-to-use interface to affordability, Filmora has it all!

1.Variety of Video Editing Tools and Effects

Wondershare Filmora has a variety of video editing tools and effects. Some of the advanced editing features to spice up your videos are available such as cropping, trimming, and adjusting the audio, as well as adding motion graphics, motion tracking, and more.

Furthermore, users can also access a library of royalty-free video clips, overlays, and sound effects to add the perfect touch to their videos.

2.Easy-to-Use Interface

Whether you are a beginner or a pro, Filmora’s easy-to-use interface will be your favorite! It is simple, plain, and easy to understand.

With its intuitive interface, you can also quickly and easily customize your videos with an array of special effects, including transitions, text, and music.

3.Affordable

Last but not least, the greatest catch of Wondershare Filmora is its affordability. With the wide variety of features that it offers, it has reasonable prices to offer.

With packages starting at just $49.99 per year to $79.99 perpetual, you can avail a multitude of features that update regularly and with every new version of Filmora. With these packages, you can get around 1GB of Filmora cloud storage.

So, what are you waiting for? Download Filmora now. And don’t worry; we have got you covered with some great tips to begin your Filmora journey.

Some Stunning Features in Filmora

Although Filmora is easy to use, and you can explore it on your own, it never hurts to know a few features before you dive in.

1.Split Screen Presets

Starting with split screens that are a great way of enhancing your videos. You can show multiple videos side by side, which gives a very chic look to your overall video. Here’s how to do it in Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Start a new project

Launch Filmora and click on “New Project.”

wondershare filmora interface

Step2Choose a split screen preset

On the top, go to “Templates” and then “Split Screen.”

split screen templates

Choose the preset that you need. You can also preview the layout.

Step3Add to timeline

Add the chosen preset to the timeline track.

adding split screen to timeline

Step4Add videos to the layout

Import media from your library or use stock media to add videos to your layout. Drag and drop your media on the layout.

add videos to the layout

Step5Edit the split screen

Once you have all the videos added to the layout, double-click on the split screen in the timeline panel. The edit options will appear on the left.

edit the split screen

Choose how you want to edit your video and then save it.

2.Filters and LUTs

Another cool feature that Filmora offers is Filters and LUTs. In order to do so, follow these simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Add media

Import all the video or audio files that you want to edit to the media section.

import media file

Step2Go to “Filter & LUT”

Under the “Effects” tab, go to “Filter & LUT.” Choose the LUT that you want to add to your video.

browse different luts

Step3Add the LUT to your video

Add the LUT to your timeline by drag-n-drop.

add lut to your video

Drag it to adjust it according to your video. In order to adjust the strength of the LUT, double-click on it.

edit the opacity of the lut

You can adjust the opacity of the LUT according to your preference. You can make it as soft or as strong as you want.

3.Animated Keyframes

Moving on, another one of the cool Filmora features is keyframing. Filmora allows you to add animated keyframes in your videos to add moving text or such effects. Follow the steps below to do so.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Add videos to the timeline

Add a video to your timeline and double-click on it to open up the editing options. Go to the “Animation” tab.

add video to the timeline panel

Here, you have different preset animations that you can use for your video.

Step2Add a keyframe

Add your chosen preset and hit play. You will see how that keyframe works. You can also add multiple keyframes to your video to make it look cooler.

add a keyframe

Once you play the video, it will look like this.

the final look of the animated keyframe

This is an easy way of making intros or outros of your videos.

4.Detach Audio

Suppose you have a video where you like the audio and want to use it for another video. How would you separate the audio? This is where the Detach Audio feature comes in.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Add video to the timeline

Drag and drop the video on the timeline.

add video to the timeline panel

Step2Detach audio

To separate the audio, right-click on the video and choose “Detach Audio.” The audio track will appear separately in the timeline. You can then use it as you wish.

detach the audio

5.Blur Effects

Next up, we have the feature of blurring your video or the background in your video. To do so, follow these simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Go to the effects tab

After adding the video to your timeline, go to the Effects tab on top.

go to the effects tab

Step2Search for blur effects

In the search bar, type “blur.” You will see several blur effects. Choose any effect and see a preview of it.

search for the blur effects

Step3Add effects to videos

Add the chosen effect to your video. Then adjust its position accordingly. Double-click on the blur effect in the timeline panel to change its size and opacity.

adjust the chosen blur effect

These are some of the most amazing features that we have listed here. FYI, this is just the brink of the iceberg. There is a whole lot more that Filmora has to offer.

Final Words

If you’re looking for a simple and intuitive video editing platform to help you create stunning videos, look no further than Filmora. It is packed with powerful features that let you turn your raw footage into captivating movies in no time.

With its user-friendly design, you can easily access all the tools you need to make amazing videos, no matter your skill level. Try Filmora today and create unforgettable videos that will leave viewers in awe.

A Complete Guide to Use Distortion Effect in Premiere Pro

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Premiere Pro is one of the most popular timeline-based video editing software, with over 9 million users. It’s the successor to Adobe Premiere, and it comes with cool distortion effects. We’ll look at Premiere Pro distortion effects and how to use them.

In this article

01 How to Use Distortion Effect in Premiere Pro?

02 Bonus! Free Distortion Effects for Premiere Pro

Adobe Premiere Pro offers a wide variety of beneficial editing tools and effects. Below are some of the impressive distortion effects you’ll find in Premiere Pro and how to use them in your project.

1. Corner Pin Effect

This effect distorts your image by simply changing the position of its corners. You can use the Corner pin effect to twist, skew, shrink, or stretch an image. Additionally, you can use it to simulate movement or perspective pivoting from the edge of your clip like a door opening.

You can directly manipulate the properties of the Corner Pin effect in the Program monitor by clicking the Transform right next to Corner Pin. To adjust the properties, drag one of the corner handles.

  1. To use this effect, open Premiere Pro and click File. Choose Import from the drop-down menu. The File Explorer window will open and allow you to find your footage. Select the video file you want to import, then click Open.
  2. Go to Effects Control and click Distortion. Choose Corner Pin Effect from the drop-down menu.

use corner pin effect in premiere pro

  1. You can now pin each corner from its original point to another specific point by adjusting the slider on the Upper Left, Upper Right, Lower Left, and Lower Right. You can also highlight your selection tool when working with the Corner Pin effect.

use corner pin effect in premiere pro - pin corner

2. Lens Distortion Effect

This distortion effect Premiere Pro simulates the distorted lens through which people view the clip.

1. Go to Effects Control>Distortion>Lens Distortion Effect.

2. Choose the settings you want to use from the available options and adjust the slider.

  • The Vertical and Horizontal Decentering control displaces the lens’ focal and makes the image bend and smear. The image will wrap in on itself at extreme settings.
  • The Curvature setting alters the curvature of the lens. You can specify a positive value to make the image convex, while the negative value makes the image concave.
  • The Vertical and Horizontal Prism FX setting created results similar to horizontal decentering and vertical, but the image does not wrap in on itself at extreme values.
  • Use the Fill Color option to specify the background color, and Fill Alpha to make your background transparent.

lens distortion effect in premiere pro

3. Magnify Effect

This effect allows you to enlarge a selected area of your clip. The Magnify effect acts as a magnifying glass set over an area of an image. You can also use this effect to scale the whole image far beyond 100 percent and still maintain resolution.

1. To use this effect, go to Effect Control>Distortion>Magnify.

2. Next, go to the left side of the Effects Control panel and make the necessary adjustments to suit your preferences.

  • Shape: This control specifies the magnified area shape.
  • Center: The Center control allows you to specify the center of the magnified section.
  • Magnification: This setting lets users specify the percentage of the magnification of the area they have selected, while the values represent the scale percentage.
  • Link: The Link control allows you to specify how the effect will link the Size, Feather, and Magnification amount, to enable them to decrease or increase proportionally. You will disable the Resize Layer option if you set the Link control to any of the available settings except None. Setting the Link control to any setting except None disables Resize Layer. Size & Feather To Magnification allows you to specify that the edge feather and size of the magnified section decrease or increase proportionally regarding the magnification adjustment.
  • Size: This control allows you to specify the magnified area size in pixels.
  • Feather: With the Feather option, you can specify the amount of feather the effect applies to the magnified area edge. Lower values will sharpen the edge. Higher values will soften the edge while blending the edge with the layer that’s behind it.
  • Opacity: This control allows you to specify the transparency of the magnified region.
  • Scaling: Use this option to specify the kind of scaling the effect is using to magnify an image.
  • Blending Mode: Use this control to specify the blend mode the effect will use to combine the original clip with the magnified area. The None option shows transparent pixels around the magnified section.
  • Resize Layer: Selecting this option means the effect will only use the boundaries as the clip’s edge when the magnified region extends beyond the original boundaries of the clip. Deselecting the Resize Layer means that the boundaries of the clip will crop any area of your image outside the bounding box of the original clip.

magnify effect in premiere pro

4. Mirror Effect

This distortion Premiere Pro effect splits an image along a line while reflecting one side onto the other. Where the reflection appears and which side will be reflected is determined by the reflection angles.

1. Head over to Effect Control>Distortion>Mirror to use this effect.

2. Adjust the controls until you get the results you desire.

  • Reflection Angle: With the Reflection Angle control, you can specify the angle of reflection and where it appears on the clip. A zero-degree angle reflects the left-hand side on the right.
  • Reflection Center: This control allows you to specify the position of the line. You need to click the box, then drag the resulting crosshair up to the area in the image where you would like to place the line.

mirror effect in premiere pro

5. Offset Effect

This effect pans your image within a clip, and visual details pushed off one side of this image will appear on the opposite side. You have to perform the offset with subpixel precision at the best quality.

Also, you can use Offset with a combination of other effects. Head over to Effect Control>Distortion>Offset to use this effect.

offset effect in premiere pro

6. Spherize Effect

The Spherize effect allows users to wrap a video clip around a spherical shape. You can use it to give texts and objects a three-dimensional effect. Go to Effect Control>Distortion>Spherize and adjust the radius and center of the sphere.

spherize effect in premiere pro

7. Transform Effect

This effect applies 2-dimensional geometric transformations to your clip. You can use this effect to skew clips along any axis.

1. Go to Effect Control>Distortion>Transform to apply this effect to your clip.

2. Use Transform settings to adjust Opacity, Skew, Rotation, Scale, Anchor Point, and more.

transform effect in premiere pro

8. Turbulent Displace Effect

This fun effect utilizes fractal noise to create turbulent Premiere Pro distortion effects in your image. You can use the Turbulent Displace effect to add movement to your clip.

1. Head to Effect Control>Distortion>Turbulent Displace.

2. Adjust the following controls:

  • Displacement
  • Amount
  • Size
  • Offset (Turbulence)
  • Complexity
  • Evolution
  • Pinning
  • Resize Layer
  • Antialiasing For Best Quality

Turbulent Displace effect in premiere pro

9. Twirl Effect

The Twirl effect allows you to rotate your clip around its center. It rotates the image more sharply in the middle than at the edge. You can use it on faces to make a funny clip. Navigate to Effect Control>Distortion>Twirl to start using this effect. Next, use the settings to adjust how much angle it twirls and the radius.

Twirl effect in premiere pro

10. Wave Warp Effect

This effect is one of the most popular Premiere Pro distortion effects. It generates the appearance of a wave as it’s traveling across an image. The Wave Warp effect allows you to produce various wave shapes, including sine, circular, and square waves.

It’s automatically animated at a steady speed across the time range, and that’s without frames. You need to set keyframes to vary speeds.

1. Head to Effect Control>Distortion>Wave Warp to apply this effect in your video clip.

2. Now, change the wave speed, direction, height, width, and type to suit your preference.

Wave Warp effect in premiere pro

Bonus! Free Distortion Effects for Premiere Pro

1. Liquid Distortion Effect

This effect can distort the content in a clip and can be used to shift into the next clip. It could be utilized in editing or used as a transition.

free distortion effect for premiere pro

2. Earthquake Effect

This effect adds a shaking motion to the video clip you add it to; it works as a transition but could also be a useful editing tool.

free distortion effect for premiere pro - earthquake effect

3. Glass Effect

This effect can add various blurs to the video clip and be used to transition from one clip to the next.

free distortion effect for premiere pro - glass effect

4. TV Effect

This effect imitates the view of a television being turned on or off. You can use it to introduce a new video clip. It would also be a great start or end to the entire video.

free distortion effect for premiere pro - TV effect

5. Glitch Effect

This effect adds a glitch to the video clip. You can use it in editing or as a transition from one clip to the next.

free distortion effect for premiere pro - Glitch effect

Conclusion

You can add any of these Premiere Pro distortion effects to make your videos more catchy. In turn, they will get more attention and views. Premiere Pro comes with tons of distortion effects and a responsive interface.

Try It Free Try It Free

Premiere Pro is one of the most popular timeline-based video editing software, with over 9 million users. It’s the successor to Adobe Premiere, and it comes with cool distortion effects. We’ll look at Premiere Pro distortion effects and how to use them.

In this article

01 How to Use Distortion Effect in Premiere Pro?

02 Bonus! Free Distortion Effects for Premiere Pro

Adobe Premiere Pro offers a wide variety of beneficial editing tools and effects. Below are some of the impressive distortion effects you’ll find in Premiere Pro and how to use them in your project.

1. Corner Pin Effect

This effect distorts your image by simply changing the position of its corners. You can use the Corner pin effect to twist, skew, shrink, or stretch an image. Additionally, you can use it to simulate movement or perspective pivoting from the edge of your clip like a door opening.

You can directly manipulate the properties of the Corner Pin effect in the Program monitor by clicking the Transform right next to Corner Pin. To adjust the properties, drag one of the corner handles.

  1. To use this effect, open Premiere Pro and click File. Choose Import from the drop-down menu. The File Explorer window will open and allow you to find your footage. Select the video file you want to import, then click Open.
  2. Go to Effects Control and click Distortion. Choose Corner Pin Effect from the drop-down menu.

use corner pin effect in premiere pro

  1. You can now pin each corner from its original point to another specific point by adjusting the slider on the Upper Left, Upper Right, Lower Left, and Lower Right. You can also highlight your selection tool when working with the Corner Pin effect.

use corner pin effect in premiere pro - pin corner

2. Lens Distortion Effect

This distortion effect Premiere Pro simulates the distorted lens through which people view the clip.

1. Go to Effects Control>Distortion>Lens Distortion Effect.

2. Choose the settings you want to use from the available options and adjust the slider.

  • The Vertical and Horizontal Decentering control displaces the lens’ focal and makes the image bend and smear. The image will wrap in on itself at extreme settings.
  • The Curvature setting alters the curvature of the lens. You can specify a positive value to make the image convex, while the negative value makes the image concave.
  • The Vertical and Horizontal Prism FX setting created results similar to horizontal decentering and vertical, but the image does not wrap in on itself at extreme values.
  • Use the Fill Color option to specify the background color, and Fill Alpha to make your background transparent.

lens distortion effect in premiere pro

3. Magnify Effect

This effect allows you to enlarge a selected area of your clip. The Magnify effect acts as a magnifying glass set over an area of an image. You can also use this effect to scale the whole image far beyond 100 percent and still maintain resolution.

1. To use this effect, go to Effect Control>Distortion>Magnify.

2. Next, go to the left side of the Effects Control panel and make the necessary adjustments to suit your preferences.

  • Shape: This control specifies the magnified area shape.
  • Center: The Center control allows you to specify the center of the magnified section.
  • Magnification: This setting lets users specify the percentage of the magnification of the area they have selected, while the values represent the scale percentage.
  • Link: The Link control allows you to specify how the effect will link the Size, Feather, and Magnification amount, to enable them to decrease or increase proportionally. You will disable the Resize Layer option if you set the Link control to any of the available settings except None. Setting the Link control to any setting except None disables Resize Layer. Size & Feather To Magnification allows you to specify that the edge feather and size of the magnified section decrease or increase proportionally regarding the magnification adjustment.
  • Size: This control allows you to specify the magnified area size in pixels.
  • Feather: With the Feather option, you can specify the amount of feather the effect applies to the magnified area edge. Lower values will sharpen the edge. Higher values will soften the edge while blending the edge with the layer that’s behind it.
  • Opacity: This control allows you to specify the transparency of the magnified region.
  • Scaling: Use this option to specify the kind of scaling the effect is using to magnify an image.
  • Blending Mode: Use this control to specify the blend mode the effect will use to combine the original clip with the magnified area. The None option shows transparent pixels around the magnified section.
  • Resize Layer: Selecting this option means the effect will only use the boundaries as the clip’s edge when the magnified region extends beyond the original boundaries of the clip. Deselecting the Resize Layer means that the boundaries of the clip will crop any area of your image outside the bounding box of the original clip.

magnify effect in premiere pro

4. Mirror Effect

This distortion Premiere Pro effect splits an image along a line while reflecting one side onto the other. Where the reflection appears and which side will be reflected is determined by the reflection angles.

1. Head over to Effect Control>Distortion>Mirror to use this effect.

2. Adjust the controls until you get the results you desire.

  • Reflection Angle: With the Reflection Angle control, you can specify the angle of reflection and where it appears on the clip. A zero-degree angle reflects the left-hand side on the right.
  • Reflection Center: This control allows you to specify the position of the line. You need to click the box, then drag the resulting crosshair up to the area in the image where you would like to place the line.

mirror effect in premiere pro

5. Offset Effect

This effect pans your image within a clip, and visual details pushed off one side of this image will appear on the opposite side. You have to perform the offset with subpixel precision at the best quality.

Also, you can use Offset with a combination of other effects. Head over to Effect Control>Distortion>Offset to use this effect.

offset effect in premiere pro

6. Spherize Effect

The Spherize effect allows users to wrap a video clip around a spherical shape. You can use it to give texts and objects a three-dimensional effect. Go to Effect Control>Distortion>Spherize and adjust the radius and center of the sphere.

spherize effect in premiere pro

7. Transform Effect

This effect applies 2-dimensional geometric transformations to your clip. You can use this effect to skew clips along any axis.

1. Go to Effect Control>Distortion>Transform to apply this effect to your clip.

2. Use Transform settings to adjust Opacity, Skew, Rotation, Scale, Anchor Point, and more.

transform effect in premiere pro

8. Turbulent Displace Effect

This fun effect utilizes fractal noise to create turbulent Premiere Pro distortion effects in your image. You can use the Turbulent Displace effect to add movement to your clip.

1. Head to Effect Control>Distortion>Turbulent Displace.

2. Adjust the following controls:

  • Displacement
  • Amount
  • Size
  • Offset (Turbulence)
  • Complexity
  • Evolution
  • Pinning
  • Resize Layer
  • Antialiasing For Best Quality

Turbulent Displace effect in premiere pro

9. Twirl Effect

The Twirl effect allows you to rotate your clip around its center. It rotates the image more sharply in the middle than at the edge. You can use it on faces to make a funny clip. Navigate to Effect Control>Distortion>Twirl to start using this effect. Next, use the settings to adjust how much angle it twirls and the radius.

Twirl effect in premiere pro

10. Wave Warp Effect

This effect is one of the most popular Premiere Pro distortion effects. It generates the appearance of a wave as it’s traveling across an image. The Wave Warp effect allows you to produce various wave shapes, including sine, circular, and square waves.

It’s automatically animated at a steady speed across the time range, and that’s without frames. You need to set keyframes to vary speeds.

1. Head to Effect Control>Distortion>Wave Warp to apply this effect in your video clip.

2. Now, change the wave speed, direction, height, width, and type to suit your preference.

Wave Warp effect in premiere pro

Bonus! Free Distortion Effects for Premiere Pro

1. Liquid Distortion Effect

This effect can distort the content in a clip and can be used to shift into the next clip. It could be utilized in editing or used as a transition.

free distortion effect for premiere pro

2. Earthquake Effect

This effect adds a shaking motion to the video clip you add it to; it works as a transition but could also be a useful editing tool.

free distortion effect for premiere pro - earthquake effect

3. Glass Effect

This effect can add various blurs to the video clip and be used to transition from one clip to the next.

free distortion effect for premiere pro - glass effect

4. TV Effect

This effect imitates the view of a television being turned on or off. You can use it to introduce a new video clip. It would also be a great start or end to the entire video.

free distortion effect for premiere pro - TV effect

5. Glitch Effect

This effect adds a glitch to the video clip. You can use it in editing or as a transition from one clip to the next.

free distortion effect for premiere pro - Glitch effect

Conclusion

You can add any of these Premiere Pro distortion effects to make your videos more catchy. In turn, they will get more attention and views. Premiere Pro comes with tons of distortion effects and a responsive interface.

Try It Free Try It Free

Premiere Pro is one of the most popular timeline-based video editing software, with over 9 million users. It’s the successor to Adobe Premiere, and it comes with cool distortion effects. We’ll look at Premiere Pro distortion effects and how to use them.

In this article

01 How to Use Distortion Effect in Premiere Pro?

02 Bonus! Free Distortion Effects for Premiere Pro

Adobe Premiere Pro offers a wide variety of beneficial editing tools and effects. Below are some of the impressive distortion effects you’ll find in Premiere Pro and how to use them in your project.

1. Corner Pin Effect

This effect distorts your image by simply changing the position of its corners. You can use the Corner pin effect to twist, skew, shrink, or stretch an image. Additionally, you can use it to simulate movement or perspective pivoting from the edge of your clip like a door opening.

You can directly manipulate the properties of the Corner Pin effect in the Program monitor by clicking the Transform right next to Corner Pin. To adjust the properties, drag one of the corner handles.

  1. To use this effect, open Premiere Pro and click File. Choose Import from the drop-down menu. The File Explorer window will open and allow you to find your footage. Select the video file you want to import, then click Open.
  2. Go to Effects Control and click Distortion. Choose Corner Pin Effect from the drop-down menu.

use corner pin effect in premiere pro

  1. You can now pin each corner from its original point to another specific point by adjusting the slider on the Upper Left, Upper Right, Lower Left, and Lower Right. You can also highlight your selection tool when working with the Corner Pin effect.

use corner pin effect in premiere pro - pin corner

2. Lens Distortion Effect

This distortion effect Premiere Pro simulates the distorted lens through which people view the clip.

1. Go to Effects Control>Distortion>Lens Distortion Effect.

2. Choose the settings you want to use from the available options and adjust the slider.

  • The Vertical and Horizontal Decentering control displaces the lens’ focal and makes the image bend and smear. The image will wrap in on itself at extreme settings.
  • The Curvature setting alters the curvature of the lens. You can specify a positive value to make the image convex, while the negative value makes the image concave.
  • The Vertical and Horizontal Prism FX setting created results similar to horizontal decentering and vertical, but the image does not wrap in on itself at extreme values.
  • Use the Fill Color option to specify the background color, and Fill Alpha to make your background transparent.

lens distortion effect in premiere pro

3. Magnify Effect

This effect allows you to enlarge a selected area of your clip. The Magnify effect acts as a magnifying glass set over an area of an image. You can also use this effect to scale the whole image far beyond 100 percent and still maintain resolution.

1. To use this effect, go to Effect Control>Distortion>Magnify.

2. Next, go to the left side of the Effects Control panel and make the necessary adjustments to suit your preferences.

  • Shape: This control specifies the magnified area shape.
  • Center: The Center control allows you to specify the center of the magnified section.
  • Magnification: This setting lets users specify the percentage of the magnification of the area they have selected, while the values represent the scale percentage.
  • Link: The Link control allows you to specify how the effect will link the Size, Feather, and Magnification amount, to enable them to decrease or increase proportionally. You will disable the Resize Layer option if you set the Link control to any of the available settings except None. Setting the Link control to any setting except None disables Resize Layer. Size & Feather To Magnification allows you to specify that the edge feather and size of the magnified section decrease or increase proportionally regarding the magnification adjustment.
  • Size: This control allows you to specify the magnified area size in pixels.
  • Feather: With the Feather option, you can specify the amount of feather the effect applies to the magnified area edge. Lower values will sharpen the edge. Higher values will soften the edge while blending the edge with the layer that’s behind it.
  • Opacity: This control allows you to specify the transparency of the magnified region.
  • Scaling: Use this option to specify the kind of scaling the effect is using to magnify an image.
  • Blending Mode: Use this control to specify the blend mode the effect will use to combine the original clip with the magnified area. The None option shows transparent pixels around the magnified section.
  • Resize Layer: Selecting this option means the effect will only use the boundaries as the clip’s edge when the magnified region extends beyond the original boundaries of the clip. Deselecting the Resize Layer means that the boundaries of the clip will crop any area of your image outside the bounding box of the original clip.

magnify effect in premiere pro

4. Mirror Effect

This distortion Premiere Pro effect splits an image along a line while reflecting one side onto the other. Where the reflection appears and which side will be reflected is determined by the reflection angles.

1. Head over to Effect Control>Distortion>Mirror to use this effect.

2. Adjust the controls until you get the results you desire.

  • Reflection Angle: With the Reflection Angle control, you can specify the angle of reflection and where it appears on the clip. A zero-degree angle reflects the left-hand side on the right.
  • Reflection Center: This control allows you to specify the position of the line. You need to click the box, then drag the resulting crosshair up to the area in the image where you would like to place the line.

mirror effect in premiere pro

5. Offset Effect

This effect pans your image within a clip, and visual details pushed off one side of this image will appear on the opposite side. You have to perform the offset with subpixel precision at the best quality.

Also, you can use Offset with a combination of other effects. Head over to Effect Control>Distortion>Offset to use this effect.

offset effect in premiere pro

6. Spherize Effect

The Spherize effect allows users to wrap a video clip around a spherical shape. You can use it to give texts and objects a three-dimensional effect. Go to Effect Control>Distortion>Spherize and adjust the radius and center of the sphere.

spherize effect in premiere pro

7. Transform Effect

This effect applies 2-dimensional geometric transformations to your clip. You can use this effect to skew clips along any axis.

1. Go to Effect Control>Distortion>Transform to apply this effect to your clip.

2. Use Transform settings to adjust Opacity, Skew, Rotation, Scale, Anchor Point, and more.

transform effect in premiere pro

8. Turbulent Displace Effect

This fun effect utilizes fractal noise to create turbulent Premiere Pro distortion effects in your image. You can use the Turbulent Displace effect to add movement to your clip.

1. Head to Effect Control>Distortion>Turbulent Displace.

2. Adjust the following controls:

  • Displacement
  • Amount
  • Size
  • Offset (Turbulence)
  • Complexity
  • Evolution
  • Pinning
  • Resize Layer
  • Antialiasing For Best Quality

Turbulent Displace effect in premiere pro

9. Twirl Effect

The Twirl effect allows you to rotate your clip around its center. It rotates the image more sharply in the middle than at the edge. You can use it on faces to make a funny clip. Navigate to Effect Control>Distortion>Twirl to start using this effect. Next, use the settings to adjust how much angle it twirls and the radius.

Twirl effect in premiere pro

10. Wave Warp Effect

This effect is one of the most popular Premiere Pro distortion effects. It generates the appearance of a wave as it’s traveling across an image. The Wave Warp effect allows you to produce various wave shapes, including sine, circular, and square waves.

It’s automatically animated at a steady speed across the time range, and that’s without frames. You need to set keyframes to vary speeds.

1. Head to Effect Control>Distortion>Wave Warp to apply this effect in your video clip.

2. Now, change the wave speed, direction, height, width, and type to suit your preference.

Wave Warp effect in premiere pro

Bonus! Free Distortion Effects for Premiere Pro

1. Liquid Distortion Effect

This effect can distort the content in a clip and can be used to shift into the next clip. It could be utilized in editing or used as a transition.

free distortion effect for premiere pro

2. Earthquake Effect

This effect adds a shaking motion to the video clip you add it to; it works as a transition but could also be a useful editing tool.

free distortion effect for premiere pro - earthquake effect

3. Glass Effect

This effect can add various blurs to the video clip and be used to transition from one clip to the next.

free distortion effect for premiere pro - glass effect

4. TV Effect

This effect imitates the view of a television being turned on or off. You can use it to introduce a new video clip. It would also be a great start or end to the entire video.

free distortion effect for premiere pro - TV effect

5. Glitch Effect

This effect adds a glitch to the video clip. You can use it in editing or as a transition from one clip to the next.

free distortion effect for premiere pro - Glitch effect

Conclusion

You can add any of these Premiere Pro distortion effects to make your videos more catchy. In turn, they will get more attention and views. Premiere Pro comes with tons of distortion effects and a responsive interface.

Try It Free Try It Free

Premiere Pro is one of the most popular timeline-based video editing software, with over 9 million users. It’s the successor to Adobe Premiere, and it comes with cool distortion effects. We’ll look at Premiere Pro distortion effects and how to use them.

In this article

01 How to Use Distortion Effect in Premiere Pro?

02 Bonus! Free Distortion Effects for Premiere Pro

Adobe Premiere Pro offers a wide variety of beneficial editing tools and effects. Below are some of the impressive distortion effects you’ll find in Premiere Pro and how to use them in your project.

1. Corner Pin Effect

This effect distorts your image by simply changing the position of its corners. You can use the Corner pin effect to twist, skew, shrink, or stretch an image. Additionally, you can use it to simulate movement or perspective pivoting from the edge of your clip like a door opening.

You can directly manipulate the properties of the Corner Pin effect in the Program monitor by clicking the Transform right next to Corner Pin. To adjust the properties, drag one of the corner handles.

  1. To use this effect, open Premiere Pro and click File. Choose Import from the drop-down menu. The File Explorer window will open and allow you to find your footage. Select the video file you want to import, then click Open.
  2. Go to Effects Control and click Distortion. Choose Corner Pin Effect from the drop-down menu.

use corner pin effect in premiere pro

  1. You can now pin each corner from its original point to another specific point by adjusting the slider on the Upper Left, Upper Right, Lower Left, and Lower Right. You can also highlight your selection tool when working with the Corner Pin effect.

use corner pin effect in premiere pro - pin corner

2. Lens Distortion Effect

This distortion effect Premiere Pro simulates the distorted lens through which people view the clip.

1. Go to Effects Control>Distortion>Lens Distortion Effect.

2. Choose the settings you want to use from the available options and adjust the slider.

  • The Vertical and Horizontal Decentering control displaces the lens’ focal and makes the image bend and smear. The image will wrap in on itself at extreme settings.
  • The Curvature setting alters the curvature of the lens. You can specify a positive value to make the image convex, while the negative value makes the image concave.
  • The Vertical and Horizontal Prism FX setting created results similar to horizontal decentering and vertical, but the image does not wrap in on itself at extreme values.
  • Use the Fill Color option to specify the background color, and Fill Alpha to make your background transparent.

lens distortion effect in premiere pro

3. Magnify Effect

This effect allows you to enlarge a selected area of your clip. The Magnify effect acts as a magnifying glass set over an area of an image. You can also use this effect to scale the whole image far beyond 100 percent and still maintain resolution.

1. To use this effect, go to Effect Control>Distortion>Magnify.

2. Next, go to the left side of the Effects Control panel and make the necessary adjustments to suit your preferences.

  • Shape: This control specifies the magnified area shape.
  • Center: The Center control allows you to specify the center of the magnified section.
  • Magnification: This setting lets users specify the percentage of the magnification of the area they have selected, while the values represent the scale percentage.
  • Link: The Link control allows you to specify how the effect will link the Size, Feather, and Magnification amount, to enable them to decrease or increase proportionally. You will disable the Resize Layer option if you set the Link control to any of the available settings except None. Setting the Link control to any setting except None disables Resize Layer. Size & Feather To Magnification allows you to specify that the edge feather and size of the magnified section decrease or increase proportionally regarding the magnification adjustment.
  • Size: This control allows you to specify the magnified area size in pixels.
  • Feather: With the Feather option, you can specify the amount of feather the effect applies to the magnified area edge. Lower values will sharpen the edge. Higher values will soften the edge while blending the edge with the layer that’s behind it.
  • Opacity: This control allows you to specify the transparency of the magnified region.
  • Scaling: Use this option to specify the kind of scaling the effect is using to magnify an image.
  • Blending Mode: Use this control to specify the blend mode the effect will use to combine the original clip with the magnified area. The None option shows transparent pixels around the magnified section.
  • Resize Layer: Selecting this option means the effect will only use the boundaries as the clip’s edge when the magnified region extends beyond the original boundaries of the clip. Deselecting the Resize Layer means that the boundaries of the clip will crop any area of your image outside the bounding box of the original clip.

magnify effect in premiere pro

4. Mirror Effect

This distortion Premiere Pro effect splits an image along a line while reflecting one side onto the other. Where the reflection appears and which side will be reflected is determined by the reflection angles.

1. Head over to Effect Control>Distortion>Mirror to use this effect.

2. Adjust the controls until you get the results you desire.

  • Reflection Angle: With the Reflection Angle control, you can specify the angle of reflection and where it appears on the clip. A zero-degree angle reflects the left-hand side on the right.
  • Reflection Center: This control allows you to specify the position of the line. You need to click the box, then drag the resulting crosshair up to the area in the image where you would like to place the line.

mirror effect in premiere pro

5. Offset Effect

This effect pans your image within a clip, and visual details pushed off one side of this image will appear on the opposite side. You have to perform the offset with subpixel precision at the best quality.

Also, you can use Offset with a combination of other effects. Head over to Effect Control>Distortion>Offset to use this effect.

offset effect in premiere pro

6. Spherize Effect

The Spherize effect allows users to wrap a video clip around a spherical shape. You can use it to give texts and objects a three-dimensional effect. Go to Effect Control>Distortion>Spherize and adjust the radius and center of the sphere.

spherize effect in premiere pro

7. Transform Effect

This effect applies 2-dimensional geometric transformations to your clip. You can use this effect to skew clips along any axis.

1. Go to Effect Control>Distortion>Transform to apply this effect to your clip.

2. Use Transform settings to adjust Opacity, Skew, Rotation, Scale, Anchor Point, and more.

transform effect in premiere pro

8. Turbulent Displace Effect

This fun effect utilizes fractal noise to create turbulent Premiere Pro distortion effects in your image. You can use the Turbulent Displace effect to add movement to your clip.

1. Head to Effect Control>Distortion>Turbulent Displace.

2. Adjust the following controls:

  • Displacement
  • Amount
  • Size
  • Offset (Turbulence)
  • Complexity
  • Evolution
  • Pinning
  • Resize Layer
  • Antialiasing For Best Quality

Turbulent Displace effect in premiere pro

9. Twirl Effect

The Twirl effect allows you to rotate your clip around its center. It rotates the image more sharply in the middle than at the edge. You can use it on faces to make a funny clip. Navigate to Effect Control>Distortion>Twirl to start using this effect. Next, use the settings to adjust how much angle it twirls and the radius.

Twirl effect in premiere pro

10. Wave Warp Effect

This effect is one of the most popular Premiere Pro distortion effects. It generates the appearance of a wave as it’s traveling across an image. The Wave Warp effect allows you to produce various wave shapes, including sine, circular, and square waves.

It’s automatically animated at a steady speed across the time range, and that’s without frames. You need to set keyframes to vary speeds.

1. Head to Effect Control>Distortion>Wave Warp to apply this effect in your video clip.

2. Now, change the wave speed, direction, height, width, and type to suit your preference.

Wave Warp effect in premiere pro

Bonus! Free Distortion Effects for Premiere Pro

1. Liquid Distortion Effect

This effect can distort the content in a clip and can be used to shift into the next clip. It could be utilized in editing or used as a transition.

free distortion effect for premiere pro

2. Earthquake Effect

This effect adds a shaking motion to the video clip you add it to; it works as a transition but could also be a useful editing tool.

free distortion effect for premiere pro - earthquake effect

3. Glass Effect

This effect can add various blurs to the video clip and be used to transition from one clip to the next.

free distortion effect for premiere pro - glass effect

4. TV Effect

This effect imitates the view of a television being turned on or off. You can use it to introduce a new video clip. It would also be a great start or end to the entire video.

free distortion effect for premiere pro - TV effect

5. Glitch Effect

This effect adds a glitch to the video clip. You can use it in editing or as a transition from one clip to the next.

free distortion effect for premiere pro - Glitch effect

Conclusion

You can add any of these Premiere Pro distortion effects to make your videos more catchy. In turn, they will get more attention and views. Premiere Pro comes with tons of distortion effects and a responsive interface.

Also read:

  • Title: 2024 Approved How to Create Chroma Key Written Text Effects in Filmora
  • Author: Chloe
  • Created at : 2024-05-20 03:38:34
  • Updated at : 2024-05-21 03:38:34
  • Link: https://ai-editing-video.techidaily.com/2024-approved-how-to-create-chroma-key-written-text-effects-in-filmora/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
2024 Approved How to Create Chroma Key Written Text Effects in Filmora