Best 5 Tools to Help You Know More Freeze-Frame Video Editing Skills

Best 5 Tools to Help You Know More Freeze Frame Video Editing Skills

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

How To Film a Slow Motion Video

Scenes that might otherwise be monotonous can be made more interesting by the use of slow-motion photography in movies and television shows. For instance, a battle sequence between two characters can be portrayed in its entirety, but if it is later replayed in slow motion, the intensity of the action is amplified significantly.

Let’s dive in!

1. What is slow motion?

Filmmakers use the slow-motion effect to create the illusion that the passage of time has been slowed down on the screen. In the early 20th century, an Austrian priest named August Musger was the one who came up with the idea. Playing normally recorded material at a slower pace is another method for creating the illusion of slow motion.

When a film is recorded at 25 frames per second, but played back at 24 frames per second, it will seem as if it is being shown in slow motion because all of the movements will be slightly slower than when they were actually performed. This is because the film was recorded at 25 frames per second, but the playback was done at 24 frames per second.

Because there are not enough frames to show all of the details of each frame when a 24-frame animation is played at a 25-frame rate (or a 30-frame animation at a 32-frame rate), certain frames have to be repeated (every 5th one in this case). When there is a dramatic event taking place, this manipulation of the film speed makes the action on screen appear even more dramatic or “tensioned.”

2. Understanding frame rates

When filming video, there are a set number of frames per second that you can choose from. One picture is all you get when you take a still photograph. Click. That is only one example. A frame is the name of that picture. With video, however, you take 30 or 24 images per second, which you then combine. You now have footage.

The video is a combination of tens of thousands of frames or images that are flashing before your eyes. With a normal frame rate of 24 frames per second, you are essentially taking 24 pictures per second and stitching them together to create video. When you stretch it out in post for slow motion, you double or triple the frame rate, which results in more images per second and eliminates empty gaps and jarring actions.

This is how video that has been sped up for slow motion may still preserve its quality. But you can’t just choose a frame rate based on taste. Frame rates vary depending on the different types of emotions. 60 fps will do if the video is a slo-mo of a person’s emotion. However, if your shot contains a lot of movement and you want to show it, such as when automobiles collide or explode, you may require a higher frame rate, such as 120 fps.

3. Post processing

This is when it gets a bit complicated. Some cameras come equipped with a slow-motion feature. To capture the video in slow motion at a higher frame rate, go to your settings. You might not have this built-in slow-motion feature in other models.

Therefore, even though the footage was taken at a higher frame rate, the camera is playing the movie back at the same pace it was shot at, so when you shoot at a higher frame rate, you end up with footage of a normal speed. There is a solution to that. The footage’s speed can be adjusted during post-production.

The 24/30 fps editing timelines are pre-set. The majority of the video you capture at this frame rate plays back just nicely on this timeline. You must stretch out video that was shot at a higher frame rate to match this timeline, though. That effectively doubles or triples the length of a video, depending on the multiple of the timeline’s typical frame rate.

4. Lighting

While watching TV or movies, you might have observed anything. The majority of the extremely slow photos happen in broad daylight. Not after dark or in dimly lit areas. The reason for this is that sufficient lighting is required in order to capture motion. Lighting becomes crucial as your frame rate exceeds 300 frames per second. Therefore, if you must take these pictures, you must do so in a studio environment with lots of artificial lighting.

To create that cinematic magic, you can use high CRI lighting. On the screen, a flickering light may spell doom. Flickering lights have the potential to damage slow-motion film even though they would be OK for any other scene. Because there is no risk of voltage fluctuation, LED lights are a safe bet. The reason for this is that some models do not require an electrical outlet to function. Prior to departure, make sure you have checked each and every light.

If you are filming during the day and you point your camera toward the sun, you may end up with a significant amount of glare that cannot be hidden up in the post-production stage nor can it be ignored. This is not merely a problem that occurs throughout the daytime. Flares can also be obtained from moving vehicles and various other sources of light. If you use a flat lens when you’re out at night, you can eliminate the risk of something like that happening.

5. Why use slow motion?

When you first begin working with slow-motion video, you need to ask yourself, “What exactly is the purpose behind me choosing this effect?” Once you have an answer to that question, you may move on to the next step.

In most cases, there are often two primary causes for it.

1. It makes sense to present emotions on the screen for a longer period of time in order for the audience to be able to absorb and comprehend it in its whole if they are shown for a longer period of time since moments that are packed with emotions seem to endure longer than ordinary ones.

2. The second strategy is to draw attention to striking visuals that you might have overlooked in other circumstances and that contribute significantly to the aesthetic value of your setting. A flutter of the eyelid, a butterfly stretching its wings, rains falling on a flower petal, shards of fire breaking free, etc. are all examples of how quickly things may happen. You need to have a good reason for using slow motion, and you shouldn’t abuse the effect too much too. You should only do so at those moments where it makes logical sense to do so.

Subconscious slow-motion. Overusing or misusing a function ruins its appeal. Filming isn’t an exact science, but it does nothing unnecessary. For a cinematic effect, slow-motion should be introduced carefully.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Using Track Matte and Tracking in Adobe After Effects: Reviewing All Possibilities

The realm of video editing has seen significant progress in recent years. With premium tools such as Adobe After Effects, you can take your videos to the next level. However, not every tool is easy to navigate. Some features in popular video editing software can be hard to get around.

The following guide provides valuable insight on how to use Track Matte in After Effects. Explore the endless possibilities of Track Mattes After Effects and Mask Tracking in After Effects. Also, discover a simple alternative to make After Effects mask tracking easy.

AI Smart Masking Spice up your video content with the endless possibilities of AI masking functions!

Free Download Free Download Learn More

Part 1: How to Utilize Track Mattes in Adobe After Effects?

After Effects by Adobe is a software application dedicated to visual effects and motion graphics for videos. The tool is commonly used in the post-production process of videos. The wide toolset of After Effects can be useful in filmmaking, video gaming, and TV. After Effects offers everything you need to take your creative inspirations to the next level.

• Motion Graphics: After Effects lets users animate characters and backgrounds in videos. You can generate 3-dimensional models from 2D animations. After Effects also supports the animation of logos to bring your elements to life.
• Rotoscoping: You can remove elements or drop new ones in your video using After Effects. The Roto Brush Tool can easily separate the background and foreground. You can then replace unwanted objects and replace them with new elements.
• Motion Tracking: Tracking the movement of an object is quite simple in After Effects. You can pin any element to a moving object. The smooth dynamics can enhance the overall result of the footage.
• VFX and Special Effects: After Effects is the perfect tool to add special effects to your videos. Its VFX tool lets users add magic to the footage. You can make objects disappear, control the weather, stabilize your video, and more.

Using Track Mattes in After Effects

In Adobe After Effects, a track matte is a layer that defines the transparency of another layer. It acts as a stencil, determining which parts of the underlying layer are visible and which are transparent. Track mattes are used for creating various effects such as text animations, transitions, and seamlessly composing multiple layers. After Effects offers four Track Matte options:

• Alpha Matte: Alpha matte in After Effects allows white areas in the matte layer to become visible while black areas become transparent. Effectively, this helps the underlying layer to show through.
• Alpha Inverted Matte: In an alpha inverted matte, black areas in the matte layer are visible, and white areas are transparent. It reverses the transparency values to create unique effects.
• Luma Matte: A luma matte uses the brightness values of the matte layer to determine visibility. Bright areas in the matte layer are visible, while dark areas are transparent.
• Luma Inverted Matte: The luma inverted matte works opposite to the luma matte. The top layer’s dark areas are visible, while bright areas are transparent.

You can use any of the track mattes in After Effects according to your requirements. Following is a step-by-step guide on how to use track mattes:

Step 1

To apply a track matte to your video, you must work with two layers. The top layer acts as the alpha or the luminance layer. The bottom layer acts as the fill. Once you have identified the layers, you can proceed to the next step.

Step 2

Go to the “Modes” column and open the dropdown menu next to “Layer List.” Here, select the layer you wish to use as the track matte.

Step 3

You will see two toggle switches once you select your layer. You can use these switches and the available options to set the transparency for the Track Matte. You can add alpha matte in After Effects or other types from here.

Part 2: Performing Mask Tracking With Adobe After Effects: Reviewing the Steps

Another remarkable feature that After Effects offers is mask tracking. Using After Effects mask tracking, you can automatically animate a mask’s position, shape, or path. This is done to match the movement of an object in a video clip. You can now easily deal with complex or fast-moving footage with this feature. To use Track Mask in After Effects, you can follow these steps:

Step 1

Import the footage you wish to edit in After Effects. Select the clip you wish to track from the timeline. Then, select the “Pen” tool from the top toolbar or press G on your keyboard. Select the area around the object you wish to mask in the footage.

Step 2

Now, open the layer and right-click on the mask name to select “Track Mask.” This will open the mask tracker in the tracker panel at the right. Open the dropdown menu next to the “Method” option. Here, you can find a range of options for tracking methods. Choose the one according to your requirements. If the object isn’t moving much, you can choose a simple option such as “Position.”

Step 3

Tap the “Analyze Forward” icon and let the tracker analyze the frames in the clip. Once the process has finished, you can restart your clip and set “Mask Mode” from the timeline to “Subtract.” This will remove the selected object from the clip.

Step 4

To fill in the details, go to the “Window” menu from the top and select “Content Aware Fill.” Once you see the panel on the screen, set the “Alpha Extension” slider to a number of your choice and click on “Generate Fill Layer.”

Part 3: How to Make Masking Easy? Try Wondershare Filmora

Although After Effects is a great tool for professional-quality video editing, it is not everyone’s cup of tea. Features such as motion track masks in After Effects are challenging to navigate. Novice users can face trouble getting around the complex masking process in After Effects. For a simpler alternative, you can try Wondershare Filmora .

Filmora is the complete solution when it comes to video editing. The multi-platform tool offers a range of useful features for video and audio manipulation. With thousands of built-in templates and presets, Filmora can help users kick-start their creative journey. You can use this easy-to-use tool as the perfect alternative to After Effects mask tracking.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Main Highlights of Wondershare Filmora

Filmora offers a comprehensive toolset to help users make the most of their media files. Some useful resources provided by Wondershare Filmora include:

• AI Text-Based Editing: Filmora allows users to convert audio from videos into editable text. This can help you easily modify your video content. The feature can be used for quick transcriptions, subtitles, and translations.

• Speed Ramping: Using Filmora, users can apply professional speed effects in footage. You can adjust your video speed and create unique cinematic effects in no time. Filmora also helps maintain the audio pitch to avoid abrupt changes.

• Compound Clip: Filmora can help users merge multiple clips into a single footage. You can obtain complete control over the integrated clip for editing. This can help users manage and adjust multiple clips easily.

• AI Vocal Remover: The Vocal Remover tool of Filmora offers AI power to separate vocals and music from any audio. You can get separate acapella and vocals for various purposes. From karaoke to creative dubs, everything is now possible with Filmora.

Using AI Smart Masking in Filmora – A Step-by-Step Guide

Filmora offers an AI-powered masking feature for users. This allows automatic recognition and selection of objects in videos. You can create seamless transitions, color-correct elements, remove background, and more. The tool can easily detect and separate objects, so you don’t have to put in manual effort. Here is the step-by-step guide for AI smart masking using Filmora:

Step 1: Import Footage in Filmora

Install and launch Wondershare Filmora on your device. From the homepage, tap “New Project” and go to the “File” tab from the top. Tap “Import Media” in the dropdown menu and insert your video clips into the timeline.

Step 2: Enable AI Mask

Select your clip in the timeline and go to the “Video” tab from the right panel. Select the “Mask” option and tap the “AI Mask” icon. Under the section, you can choose from options such as “Select Character” or “Smart Brush.” Select one according to your requirements and hit “Add Mask.”

Step 3: Adjust Mask Settings and Export File

After you apply the masking option, you can adjust other mask settings. Filmora allows users to set the expansion range, blur strength, opacity, and other aspects. Once satisfied with the results, tap the “Export” button from the top-right corner and choose a pathway to save your video.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

Adobe After Effects is an industry-standard tool for video editing and manipulation. Track Mattes and Track Masks in After Effects are valuable tools that can help elevate your video’s potential. For a simple and effective alternative, you can try Wondershare Filmora. The tool uses smart masking using AI to make the process easier.

Free Download Free Download Learn More

Part 1: How to Utilize Track Mattes in Adobe After Effects?

After Effects by Adobe is a software application dedicated to visual effects and motion graphics for videos. The tool is commonly used in the post-production process of videos. The wide toolset of After Effects can be useful in filmmaking, video gaming, and TV. After Effects offers everything you need to take your creative inspirations to the next level.

• Motion Graphics: After Effects lets users animate characters and backgrounds in videos. You can generate 3-dimensional models from 2D animations. After Effects also supports the animation of logos to bring your elements to life.
• Rotoscoping: You can remove elements or drop new ones in your video using After Effects. The Roto Brush Tool can easily separate the background and foreground. You can then replace unwanted objects and replace them with new elements.
• Motion Tracking: Tracking the movement of an object is quite simple in After Effects. You can pin any element to a moving object. The smooth dynamics can enhance the overall result of the footage.
• VFX and Special Effects: After Effects is the perfect tool to add special effects to your videos. Its VFX tool lets users add magic to the footage. You can make objects disappear, control the weather, stabilize your video, and more.

Using Track Mattes in After Effects

In Adobe After Effects, a track matte is a layer that defines the transparency of another layer. It acts as a stencil, determining which parts of the underlying layer are visible and which are transparent. Track mattes are used for creating various effects such as text animations, transitions, and seamlessly composing multiple layers. After Effects offers four Track Matte options:

• Alpha Matte: Alpha matte in After Effects allows white areas in the matte layer to become visible while black areas become transparent. Effectively, this helps the underlying layer to show through.
• Alpha Inverted Matte: In an alpha inverted matte, black areas in the matte layer are visible, and white areas are transparent. It reverses the transparency values to create unique effects.
• Luma Matte: A luma matte uses the brightness values of the matte layer to determine visibility. Bright areas in the matte layer are visible, while dark areas are transparent.
• Luma Inverted Matte: The luma inverted matte works opposite to the luma matte. The top layer’s dark areas are visible, while bright areas are transparent.

You can use any of the track mattes in After Effects according to your requirements. Following is a step-by-step guide on how to use track mattes:

Step 1

To apply a track matte to your video, you must work with two layers. The top layer acts as the alpha or the luminance layer. The bottom layer acts as the fill. Once you have identified the layers, you can proceed to the next step.

Step 2

Go to the “Modes” column and open the dropdown menu next to “Layer List.” Here, select the layer you wish to use as the track matte.

Step 3

You will see two toggle switches once you select your layer. You can use these switches and the available options to set the transparency for the Track Matte. You can add alpha matte in After Effects or other types from here.

Part 2: Performing Mask Tracking With Adobe After Effects: Reviewing the Steps

Another remarkable feature that After Effects offers is mask tracking. Using After Effects mask tracking, you can automatically animate a mask’s position, shape, or path. This is done to match the movement of an object in a video clip. You can now easily deal with complex or fast-moving footage with this feature. To use Track Mask in After Effects, you can follow these steps:

Step 1

Import the footage you wish to edit in After Effects. Select the clip you wish to track from the timeline. Then, select the “Pen” tool from the top toolbar or press G on your keyboard. Select the area around the object you wish to mask in the footage.

Step 2

Now, open the layer and right-click on the mask name to select “Track Mask.” This will open the mask tracker in the tracker panel at the right. Open the dropdown menu next to the “Method” option. Here, you can find a range of options for tracking methods. Choose the one according to your requirements. If the object isn’t moving much, you can choose a simple option such as “Position.”

Step 3

Tap the “Analyze Forward” icon and let the tracker analyze the frames in the clip. Once the process has finished, you can restart your clip and set “Mask Mode” from the timeline to “Subtract.” This will remove the selected object from the clip.

Step 4

To fill in the details, go to the “Window” menu from the top and select “Content Aware Fill.” Once you see the panel on the screen, set the “Alpha Extension” slider to a number of your choice and click on “Generate Fill Layer.”

Part 3: How to Make Masking Easy? Try Wondershare Filmora

Although After Effects is a great tool for professional-quality video editing, it is not everyone’s cup of tea. Features such as motion track masks in After Effects are challenging to navigate. Novice users can face trouble getting around the complex masking process in After Effects. For a simpler alternative, you can try Wondershare Filmora .

Filmora is the complete solution when it comes to video editing. The multi-platform tool offers a range of useful features for video and audio manipulation. With thousands of built-in templates and presets, Filmora can help users kick-start their creative journey. You can use this easy-to-use tool as the perfect alternative to After Effects mask tracking.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Main Highlights of Wondershare Filmora

Filmora offers a comprehensive toolset to help users make the most of their media files. Some useful resources provided by Wondershare Filmora include:

• AI Text-Based Editing: Filmora allows users to convert audio from videos into editable text. This can help you easily modify your video content. The feature can be used for quick transcriptions, subtitles, and translations.

• Speed Ramping: Using Filmora, users can apply professional speed effects in footage. You can adjust your video speed and create unique cinematic effects in no time. Filmora also helps maintain the audio pitch to avoid abrupt changes.

• Compound Clip: Filmora can help users merge multiple clips into a single footage. You can obtain complete control over the integrated clip for editing. This can help users manage and adjust multiple clips easily.

• AI Vocal Remover: The Vocal Remover tool of Filmora offers AI power to separate vocals and music from any audio. You can get separate acapella and vocals for various purposes. From karaoke to creative dubs, everything is now possible with Filmora.

Using AI Smart Masking in Filmora – A Step-by-Step Guide

Filmora offers an AI-powered masking feature for users. This allows automatic recognition and selection of objects in videos. You can create seamless transitions, color-correct elements, remove background, and more. The tool can easily detect and separate objects, so you don’t have to put in manual effort. Here is the step-by-step guide for AI smart masking using Filmora:

Step 1: Import Footage in Filmora

Install and launch Wondershare Filmora on your device. From the homepage, tap “New Project” and go to the “File” tab from the top. Tap “Import Media” in the dropdown menu and insert your video clips into the timeline.

Step 2: Enable AI Mask

Select your clip in the timeline and go to the “Video” tab from the right panel. Select the “Mask” option and tap the “AI Mask” icon. Under the section, you can choose from options such as “Select Character” or “Smart Brush.” Select one according to your requirements and hit “Add Mask.”

Step 3: Adjust Mask Settings and Export File

After you apply the masking option, you can adjust other mask settings. Filmora allows users to set the expansion range, blur strength, opacity, and other aspects. Once satisfied with the results, tap the “Export” button from the top-right corner and choose a pathway to save your video.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

Adobe After Effects is an industry-standard tool for video editing and manipulation. Track Mattes and Track Masks in After Effects are valuable tools that can help elevate your video’s potential. For a simple and effective alternative, you can try Wondershare Filmora. The tool uses smart masking using AI to make the process easier.

Guide To Creating the Best Video Collages

By the combination of multiple videos together, you can create a studio-friendly video collage. Several types of collage videos are on the web, such as overlays, grids, split-screen, sequential, and more. If you are a startup business, you need to be aware of the effectiveness of video collages. It helps in showing more information in a limited time.

By the end of this discussion, you will know how to make a video collage with music without investing extra time and effort. Besides this, we will also guide you in making captivating video collages with Filmstock.

Part 1: What Is The Purpose of Using Video Collages?

Video collages serve various purposes according to the user’s needs. It helps create multiple creative video clips or images into a single composition. Some of the objectives of video collages are mentioned below that can be very helpful to you:

Visual Storytelling

If you want to convey your story or a message to the world, you can use video collages to present your story sequentially through video clips and images. Visual storytelling can be found in various mediums, including films, television, etc. The video collage technique helps you to create a showcase of your different moments. It includes event highlights or memories with friends or families.

Online Platforms

Video collages are one of the most popular formats of content creation on social media. It is because it allows you to share multiple moments, highlights, and scenes to engage your audience from different angles. This format is very popular with students because they can create and share their multiple moments in a single video.

Complementary Content

You can create contrasting content that conveys your message or theme using video collages. You can create a perfect comparison by using different images and videos side-by-side. Moreover, using this method, you can create amazing video content and stand out if you are a video editor.

Increasing Screen Coverage

Video collages allow you to present your content in a way that can use the maximum screen. It gets great when you have limited space and time to showcase your multiple visuals. You can optimize the available space and provide a comprehensive content view. Get this done by selecting and arranging the visual content carefully.

Video Collage Editor A powerful video editor helping you make a video collage without investing extra time and effort!

Free Download Free Download Learn More

Part 2: Filmstock: A Great Resource For Getting Video Collage Template

Have you understood the purpose of using video collages for managing memories? You will require a resource for creating the best video collages. Having a template makes things extremely easy to cover in video editing. Wondershare provides the option of using Filmstock , a dedicated resource for getting video collage templates. You can find everything in Filmstock to make a video collage, from effects to videos and audio.

The entire collection provided in Filmstock is highly sophisticated and coherent. It truly makes procession easy and convenient for users who are interested in video editing. While finding the best effects for Filmora, you can also observe great resource packs for Adobe After Effects. The entire resource is categorized into different sections, making it easy for you to navigate content.

Working with Filmstock is easy and effective when combined with Filmora. You can also immerse yourself in 3D content within this resource website. When it comes to creating collage videos, you can get help from the templates available at Filmstock.

Part 3: Wondershare Filmora: Create The Finest Video Collages Through Filmstock

By consulting Filmstock, you are now aware of how to get the best video collage templates from the platform. After finding one for your work, you can go to Wondershare Filmora to create and edit the video collage. It features a unique video editing platform for its users, giving a diversity of options to work with.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

From editing the video to managing its audio, you can perform all tasks on Filmora with ease. Unlike other video editors, Wondershare Filmora does not make it difficult for you to edit videos. Its structure is designed to make operations easy for all kinds of users who are in video editing. To know more about how Filmora makes things easy in creating the finest video collages, learn more about its features below:

1. Motion Tracking

If your video collage has a specific element that needs to be tracked, you can utilize the services of motion tracking . With a single click, you can track the motion of an object and make it the center of the video.

2. Adjustment Layer

Users working on specific video content require dedicated presets for their work. They can create adjustment layers for color grading, presets, and perform other operations.

3. AI Copywriting

Those who are creating specific social media content can utilize the services of AI copywriting powered by ChatGPT. All you must do is provide a prompt, after which they can create the perfect content for their video collage.

4. Speech-To-Text

If your video collage needs to be induced with subtitles, the service of Speech-to-Text works perfectly on Filmora. Users can get the best subtitles in a single click, with an accuracy of more than 95%, making it a great tool.

Part 4: Step-by-Step Guide: Creating Video Collages Through Filmstock

Filmstock is a resource library where you can access diversified templates for several things. It also helps you access the attractive video collage template. With that template, you can make optimistically impressive video collages. You can access the collages on versatile ranges and utilize them as needed.

You must be thinking that it is not easy to make video collages with Filmstock. However, it is not true, and you can see it for yourself from the below-given instructions:

Filmora Tutorial - Create a Photo Sliding Birthday Intro | Filmora Creator Academy

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Open Filmstock and Select Video Collage

Access Filmstock on your device and go to “Search Bar.” From here, search for Video Collages, continue to select one template, and click the “Download” button. Once the template is downloaded, launch Filmora and import your video clips.

Step 2Make a Video Collage

Next, drag the clips to the timeline and go to “Effects.” Locate the desired effect and drag it on the video in “Timeline.” Once done, select the “Transitions” icon and drag the transition in videos in “Timeline.” You can also customize the additional parameters from the adjustment section.

Step 3Preview and Export Video Collages

Make sure to click the “Play” icon to preview the results. When satisfied with the results, hit the “Export” button. Manage the export settings in the next window, and again select “Export.”

Bonus Part: Creating Slideshows Using Wondershare Filmora

Do you know that Wondershare Filmora can also be used to create slideshows? In this part, we will be discussing the details of how to create slideshows using Filmora. Look through the steps below to understand things that need to be investigated while creating slideshows:

Filmora Tutorial - Edit a Fast Slideshow Intro

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Launch Wondershare Filmora

On opening Wondershare Filmora on your computer, continue to select the “New Project” button. This opens a new screen where you can import the content for the slideshow on Filmora. Select the “Import” option to add the media content for the slideshow. After importing the media content, drag and drop it on the timeline.

Step 2Add Effects to Slideshow

Once the media content is imported for the slideshow, continue to add effects to your video editing canvas. You can proceed to the “Effects” tab and add your appropriate choice.

Step 3Add Transitions and Titles

Following this, you can also look to add “Transitions” to your work. This can be done by accessing the options from the top of the screen. You can add “Titles” to your slideshow to create the best content.

Step 4Export Final Slideshow from Filmora

Once you are done with this, lead to the “Export” option to save the created slideshow on Filmora. Set the parameters for the video and click “Export” on the window to execute the process.

Conclusion

This article has provided viewers with an idea of how to create the best video collages with the right platforms. Filmstock, which offers resources for video collage templates, has been discussed. Along with that, Wondershare Filmora has been displayed as the best option for making video collages of the finest quality. If you wish to create perfect video collages, work on the details to get the best results.

Free Download Free Download Learn More

Part 2: Filmstock: A Great Resource For Getting Video Collage Template

Have you understood the purpose of using video collages for managing memories? You will require a resource for creating the best video collages. Having a template makes things extremely easy to cover in video editing. Wondershare provides the option of using Filmstock , a dedicated resource for getting video collage templates. You can find everything in Filmstock to make a video collage, from effects to videos and audio.

The entire collection provided in Filmstock is highly sophisticated and coherent. It truly makes procession easy and convenient for users who are interested in video editing. While finding the best effects for Filmora, you can also observe great resource packs for Adobe After Effects. The entire resource is categorized into different sections, making it easy for you to navigate content.

Working with Filmstock is easy and effective when combined with Filmora. You can also immerse yourself in 3D content within this resource website. When it comes to creating collage videos, you can get help from the templates available at Filmstock.

Part 3: Wondershare Filmora: Create The Finest Video Collages Through Filmstock

By consulting Filmstock, you are now aware of how to get the best video collage templates from the platform. After finding one for your work, you can go to Wondershare Filmora to create and edit the video collage. It features a unique video editing platform for its users, giving a diversity of options to work with.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

From editing the video to managing its audio, you can perform all tasks on Filmora with ease. Unlike other video editors, Wondershare Filmora does not make it difficult for you to edit videos. Its structure is designed to make operations easy for all kinds of users who are in video editing. To know more about how Filmora makes things easy in creating the finest video collages, learn more about its features below:

1. Motion Tracking

If your video collage has a specific element that needs to be tracked, you can utilize the services of motion tracking . With a single click, you can track the motion of an object and make it the center of the video.

2. Adjustment Layer

Users working on specific video content require dedicated presets for their work. They can create adjustment layers for color grading, presets, and perform other operations.

3. AI Copywriting

Those who are creating specific social media content can utilize the services of AI copywriting powered by ChatGPT. All you must do is provide a prompt, after which they can create the perfect content for their video collage.

4. Speech-To-Text

If your video collage needs to be induced with subtitles, the service of Speech-to-Text works perfectly on Filmora. Users can get the best subtitles in a single click, with an accuracy of more than 95%, making it a great tool.

Part 4: Step-by-Step Guide: Creating Video Collages Through Filmstock

Filmstock is a resource library where you can access diversified templates for several things. It also helps you access the attractive video collage template. With that template, you can make optimistically impressive video collages. You can access the collages on versatile ranges and utilize them as needed.

You must be thinking that it is not easy to make video collages with Filmstock. However, it is not true, and you can see it for yourself from the below-given instructions:

Filmora Tutorial - Create a Photo Sliding Birthday Intro | Filmora Creator Academy

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Open Filmstock and Select Video Collage

Access Filmstock on your device and go to “Search Bar.” From here, search for Video Collages, continue to select one template, and click the “Download” button. Once the template is downloaded, launch Filmora and import your video clips.

Step 2Make a Video Collage

Next, drag the clips to the timeline and go to “Effects.” Locate the desired effect and drag it on the video in “Timeline.” Once done, select the “Transitions” icon and drag the transition in videos in “Timeline.” You can also customize the additional parameters from the adjustment section.

Step 3Preview and Export Video Collages

Make sure to click the “Play” icon to preview the results. When satisfied with the results, hit the “Export” button. Manage the export settings in the next window, and again select “Export.”

Bonus Part: Creating Slideshows Using Wondershare Filmora

Do you know that Wondershare Filmora can also be used to create slideshows? In this part, we will be discussing the details of how to create slideshows using Filmora. Look through the steps below to understand things that need to be investigated while creating slideshows:

Filmora Tutorial - Edit a Fast Slideshow Intro

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Launch Wondershare Filmora

On opening Wondershare Filmora on your computer, continue to select the “New Project” button. This opens a new screen where you can import the content for the slideshow on Filmora. Select the “Import” option to add the media content for the slideshow. After importing the media content, drag and drop it on the timeline.

Step 2Add Effects to Slideshow

Once the media content is imported for the slideshow, continue to add effects to your video editing canvas. You can proceed to the “Effects” tab and add your appropriate choice.

Step 3Add Transitions and Titles

Following this, you can also look to add “Transitions” to your work. This can be done by accessing the options from the top of the screen. You can add “Titles” to your slideshow to create the best content.

Step 4Export Final Slideshow from Filmora

Once you are done with this, lead to the “Export” option to save the created slideshow on Filmora. Set the parameters for the video and click “Export” on the window to execute the process.

Conclusion

This article has provided viewers with an idea of how to create the best video collages with the right platforms. Filmstock, which offers resources for video collage templates, has been discussed. Along with that, Wondershare Filmora has been displayed as the best option for making video collages of the finest quality. If you wish to create perfect video collages, work on the details to get the best results.

Also read: