How to Speed Up and Slow Down a Video

Speeding and slowing down the speed of a video is a marvel in the video editing world. In the older days, this feat was accomplished only by the big-budget filming industry.

This article will dive into how you can access the modern-day features available in video editing software. From these features, you can alter the speed of your video easily. However, before we get into the step-by-step guide, let’s understand what fast and slow-mo videos are.

Part 1. What Are Fast and Slow Motion Videos?

As the name suggests, fast-motion videos are the ones that have been sped up from their average speed.

Similarly, slow-motion videos are the ones that have been slowed down from their average speed. The slow-motion effect, also known as the slow-mo effect, is widespread in modern cinema.

Now that we know what Fast and slow-motion videos are. Let’s understand their applications. Or how you can use them in your videos. Scroll below to learn more!

Part 2. Why Should You Change the Speed of Your Videos?

The answer to this question would be that it’s a personal creative decision that will allow you to make your videos more engaging.

Fast Motion Videos

Fast-motion videos are used in many areas of filming. For example, you can speed up your videos to create a funny video or shorten its length.

The fast-motion effect has many applications, such as cooking tutorial videos. For example, the step-by-step process of a cooking tutorial can be too long to fit into a single video. Or it could also help you in cases where you want to keep the length of the video short.

The fast motion of the steps will allow the viewer to quickly grasp the whole process without watching the entire video.

Slow Motion Videos

You can also slow down your videos to give the viewers a more detailed perspective of a scene. Or you can also create a slow-mo video that offers a general surreal vibe.

A famous example is in action films. The producers of the first Matrix film used the Slow-mo effect in the famous bullet dodging scene.

You may wonder how the film producers made the slow-mo effect. The technology at that time was less developed than the recent day. So, even you can create a slow-mo effect.

Before we get into the editing process, let’s first understand what you will need to change the speed of your videos!

Part 3. What Will You Need to Change the Speed of Your Videos?

You will need the following essentials to change the speed of a video:

1. Wondershare Filmora

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

To begin, you will need a good video editor. Wondershare Filmora is the best video editing software available. It has a very engaging system UI that allows inexperienced users to learn how to use it quickly. It also has a diverse collection of stock media. And not only that! It allows you to access reliable features to change the speed of a video.

You can change the speed of the video on Filmora by the speed adjustment panel or by the duration panel present above the timeline. It will adjust in just seconds with a few clicks. This feature makes Filmora more prior with editing tools.

2. Video Clips

Well, it is evident that to change the speed of your videos, you will need video clips. But there are a few things you can keep in mind before adjusting the speed of a video.

Note: Slowing down a video requires a shot at a higher frame rate. The greater the frame rate, the better will be the slow-mo quality. On the other hand, speeding up videos does not have a strict frame rate requirement.

Part 4. How Can You Change the Speed of Your Videos?

Here you will learn two ways in which you can change the speed of your videos. The two methods to change the speed of your video are mentioned:

• The speed adjustment panel.
• Duration panel settings.

Let’s get started with the editing process. The first method we will look into is the Speed Adjustment panel.

1. Change Speed With the Speed Adjustment Panel

The Speed Adjustment panel is the speed adjuster in the Wondershare Filmora software. This feature will give you a drag bar to adjust the speed of your video.

You can move the bar to the right to increase the speed of your video. Similarly, you can move it to the left to decrease the rate.

But before we use this feature, we will need to download the Filmora video editing software. So please scroll below to learn how to download it!

Step1 Download Filmora

First and foremost, you must have access to Filmora. For this, download Wondershare Filmora. Then, activate this app or software on your PC.

Step2 Import The Video Files

The next step after downloading Filmora is to import your video clips. To accomplish this, follow the steps outlined below:

• Locate and select the Import icon on the top left side of the Filmora Home Interface.
• It takes you to your computer’s library.
• Select the videos to be edited and then click OK.

You can also import the files by another method. After you have opened Filmora, you can restore the Filmora Window size and import by dragging and dropping the clips:

• Drag the cursor to select the video clips you want.
• Then, drop them in the Filmora import window.

Filmora supports various formats for your video clips. They include the Mp4, AVI, MOV, GIFs, and more.

After you have imported your video clips, add them to the timeline as shown below!

Step3 Add The Video Clips to The Timeline

After you’ve imported clips in the Import window, drag them onto the timeline. Follow the steps outlined below to accomplish this:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

Now that we have our video clips in the timeline, we can start adjusting the speed.

Step4 Open the Speed Adjustment Panel

The speed adjustment panel, or the Uniform Speed, is the feature of Filmora that allows you to change the speed of your video. For example, to open the Unifrom Speed panel, do as follows:

• Double-click on the video clip.
• In the pop-up column, scroll down till you see the Unifrom Speed option and click on it.
• The speed controls will be shown in the import window.

In the speed control panel, you can see the speed adjuster slider. A number will usually mark this at the end. This number tells you the current speed your video is calibrated in and how fast or slow the motion effects will be.

1.00 is always the average speed. 0.5 being half and 2.00 being double the average speed. To control the speed through the slider, you will need to do the following:

• To increase the speed: Type in the number you want your rate to be. Or, drag the slider to the right as you wish.
• To decrease the speed: Type in a number less than the standard 1.00, or you can drag the slider to the left as you wish.

The number of your speed can be an inconvenience if you have no prior experience. Instead, render the video and play it from the beginning with the changes that you made. It gives you a better idea of the speed of your video.

Step5 Detach The Audio

The corresponding audio also gets affected when you slow down or speed up a video. In this scenario, you can also choose to detach the audio beforehand. It allows you to maintain the original playback speed. To detach the audio, follow the steps as mentioned:

• Right-click on the video clip.
• In the pop-up column, scroll down to the Detach Audio option and click on it.

It will create an audio file in a separate audio tab in the timeline. You can adjust this audio according to your liking. You can edit the detached audio by:

• Double-click on the audio file.
• A settings menu will open in the import window.
• Adjust the Fade options for your Audio.
• Drag the Fade out slider to the right to Fade out your Audio.
• To Fade in your Audio, drag the Fade in slider to the right.

You can also remove the background noise and the pitch of the audio if you want. You can also replace the video’s original audio with a new one. Click on the audio file and press Del on the keyboard to delete it. To add new audio, do as mentioned ahead:

• Click on The Audio icon above the import window.
• Browse The Audio that matches the vibe of your video.
• Drag and drop it below your video clip.

Doing so would have created alternate audio for your video. Play the video from the start and confirm your changes.

Step6 Save Your Project

Saving a project on Filmora is straightforward. First, you need a few steps to proceed with it. Then, when you are done making changes to the video, simply follow as guided ahead, and you’ll be good to go.

• On the Filmora home interface, Go to > File > Save Project.

• Select the Library/Folder where you want your project to be stored.
• Type in the text box to change the name of your project.

• Click on Save.

That’s about it! You have now saved your project. Now let’s move on to export our video.

Step7 Export Your Video

After we are done with saving our project, we will now move on to export our video.

Note: Before we export our video, ensure everything is according to your wish. Play the final video again and confirm your changes.

You can export your video to many of the available video formats. And not only that, but you can also export your video to local files and a specific device. You can also export your video directly to YouTube, Vimeo, and DVD format.

To export your video, all you have to do is the following steps:

• Click on Export.
• Type in the Video name.
• Select the Directory you want your file to be stored in.
• Select the Video Format.
• Select the Resolution of your Video.

Note: If you want to export your video directly to Youtube or Vimeo, ensure you are logged in.

• Click on Export.

Wait till Wondershare Filmora finishes exporting your video. Then, another window will pop up for a reminder when the shipping is done.

These were the methods by which you can change the speed of your video using the Speed Adjustment panel. Now let’s move on to the following method to adjust the speed via the Duration panel.

2. Change Speed via the Duration Panel

The duration panel is one the most valuable features of Wondershare Filmora as it allows you to change the video speed by duration adjustment.

This feature is typically helpful when you have a space between video clips and want to fill it. By measuring the time between the two clips, you can adjust the duration of your video.

It will ultimately hasten the speed of your video. The hastening in rate will depend upon the gap. The smaller the gap, the faster the video will be. Similarly, the greater the gap is, the longer the video will be.

Apart from the Speed Adjustment Panel, the Duration Panel has the advantage of editing the speed of your video by simply typing in the text.

Step1 Import Video Clips to Timeline

After downloading Filmora, the next step is importing your video clips. To do so, follow the steps outlined below:

• Locate and click the Import icon in the upper left corner of the Filmora Home Interface.
• Choose the videos to be edited, then click OK.

Now that you have imported files into Filmora, you can add them to the Timeline. Notice the steps mentioned ahead:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

You can begin the editing process now that the clips are in the timeline.

Step2 Open The Duration Panel

The Duration Panel comes attached to the Unifrom Speed Panel. To access the Duration Panel, follow the steps ahead:

• Right-click on the video clip.
• In the pop column, scroll below to Unifrom Speed.

It will open the uniform speed panel in the import window. Below the speed of the controls, you can notice The Duration Panel.

Step3 Change The Speed of The Video

In The Duration Panel, you can see the average speed of your video clip. Now, if you want to reduce the speed of your video, you have to increase the duration of your video. Similarly, if you’re going to increase the speed of your video, you would have to decrease the duration.

Slow Down The Video

To slow down the video clip, follow the steps mentioned below:

• In The Duration Panel, Increase the time of the video.
• Type in a number bigger than the normal value

Note: If the average speed of the video is 00:01:00:00, increasing the value of the duration to 00:02:00:00 will reduce the speed of your video by half.

Speed Up The Video

To increase the speed of your video, follow as guided ahead:

• In The Duration Panel, decrease the time of the video.
• Type in a number smaller than the normal value

Note: If the normal video speed is 00:01:00:00, decreasing the value of the duration to 00:00:30:00 will increase the speed of your video by double.

Congratulations! You have successfully learned how to change the speed of your video by Filmora. Now, you can use both the Speed Adjustment Panel and The Duration Panel to adjust the speed of your video.

Conclusion

Changing the speed of your video can be helpful in many filming scenarios. Adjusting the speed in the older days was a marvel in the video editing industry. But the technology in the present day has allowed the typical user to edit the speed of a video.

By following the steps mentioned in this article, you can now change the speed of your video by Wondershare Filmora.

Free Download For macOS 10.14 or later

To begin, you will need a good video editor. Wondershare Filmora is the best video editing software available. It has a very engaging system UI that allows inexperienced users to learn how to use it quickly. It also has a diverse collection of stock media. And not only that! It allows you to access reliable features to change the speed of a video.

You can change the speed of the video on Filmora by the speed adjustment panel or by the duration panel present above the timeline. It will adjust in just seconds with a few clicks. This feature makes Filmora more prior with editing tools.

2. Video Clips

Well, it is evident that to change the speed of your videos, you will need video clips. But there are a few things you can keep in mind before adjusting the speed of a video.

Note: Slowing down a video requires a shot at a higher frame rate. The greater the frame rate, the better will be the slow-mo quality. On the other hand, speeding up videos does not have a strict frame rate requirement.

Part 4. How Can You Change the Speed of Your Videos?

Here you will learn two ways in which you can change the speed of your videos. The two methods to change the speed of your video are mentioned:

• The speed adjustment panel.
• Duration panel settings.

Let’s get started with the editing process. The first method we will look into is the Speed Adjustment panel.

1. Change Speed With the Speed Adjustment Panel

The Speed Adjustment panel is the speed adjuster in the Wondershare Filmora software. This feature will give you a drag bar to adjust the speed of your video.

You can move the bar to the right to increase the speed of your video. Similarly, you can move it to the left to decrease the rate.

But before we use this feature, we will need to download the Filmora video editing software. So please scroll below to learn how to download it!

Step1 Download Filmora

First and foremost, you must have access to Filmora. For this, download Wondershare Filmora. Then, activate this app or software on your PC.

Step2 Import The Video Files

The next step after downloading Filmora is to import your video clips. To accomplish this, follow the steps outlined below:

• Locate and select the Import icon on the top left side of the Filmora Home Interface.
• It takes you to your computer’s library.
• Select the videos to be edited and then click OK.

You can also import the files by another method. After you have opened Filmora, you can restore the Filmora Window size and import by dragging and dropping the clips:

• Drag the cursor to select the video clips you want.
• Then, drop them in the Filmora import window.

Filmora supports various formats for your video clips. They include the Mp4, AVI, MOV, GIFs, and more.

After you have imported your video clips, add them to the timeline as shown below!

Step3 Add The Video Clips to The Timeline

After you’ve imported clips in the Import window, drag them onto the timeline. Follow the steps outlined below to accomplish this:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

Now that we have our video clips in the timeline, we can start adjusting the speed.

Step4 Open the Speed Adjustment Panel

The speed adjustment panel, or the Uniform Speed, is the feature of Filmora that allows you to change the speed of your video. For example, to open the Unifrom Speed panel, do as follows:

• Double-click on the video clip.
• In the pop-up column, scroll down till you see the Unifrom Speed option and click on it.
• The speed controls will be shown in the import window.

In the speed control panel, you can see the speed adjuster slider. A number will usually mark this at the end. This number tells you the current speed your video is calibrated in and how fast or slow the motion effects will be.

1.00 is always the average speed. 0.5 being half and 2.00 being double the average speed. To control the speed through the slider, you will need to do the following:

• To increase the speed: Type in the number you want your rate to be. Or, drag the slider to the right as you wish.
• To decrease the speed: Type in a number less than the standard 1.00, or you can drag the slider to the left as you wish.

The number of your speed can be an inconvenience if you have no prior experience. Instead, render the video and play it from the beginning with the changes that you made. It gives you a better idea of the speed of your video.

Step5 Detach The Audio

The corresponding audio also gets affected when you slow down or speed up a video. In this scenario, you can also choose to detach the audio beforehand. It allows you to maintain the original playback speed. To detach the audio, follow the steps as mentioned:

• Right-click on the video clip.
• In the pop-up column, scroll down to the Detach Audio option and click on it.

It will create an audio file in a separate audio tab in the timeline. You can adjust this audio according to your liking. You can edit the detached audio by:

• Double-click on the audio file.
• A settings menu will open in the import window.
• Adjust the Fade options for your Audio.
• Drag the Fade out slider to the right to Fade out your Audio.
• To Fade in your Audio, drag the Fade in slider to the right.

You can also remove the background noise and the pitch of the audio if you want. You can also replace the video’s original audio with a new one. Click on the audio file and press Del on the keyboard to delete it. To add new audio, do as mentioned ahead:

• Click on The Audio icon above the import window.
• Browse The Audio that matches the vibe of your video.
• Drag and drop it below your video clip.

Doing so would have created alternate audio for your video. Play the video from the start and confirm your changes.

Step6 Save Your Project

Saving a project on Filmora is straightforward. First, you need a few steps to proceed with it. Then, when you are done making changes to the video, simply follow as guided ahead, and you’ll be good to go.

• On the Filmora home interface, Go to > File > Save Project.

• Select the Library/Folder where you want your project to be stored.
• Type in the text box to change the name of your project.

• Click on Save.

That’s about it! You have now saved your project. Now let’s move on to export our video.

Step7 Export Your Video

After we are done with saving our project, we will now move on to export our video.

Note: Before we export our video, ensure everything is according to your wish. Play the final video again and confirm your changes.

You can export your video to many of the available video formats. And not only that, but you can also export your video to local files and a specific device. You can also export your video directly to YouTube, Vimeo, and DVD format.

To export your video, all you have to do is the following steps:

• Click on Export.
• Type in the Video name.
• Select the Directory you want your file to be stored in.
• Select the Video Format.
• Select the Resolution of your Video.

Note: If you want to export your video directly to Youtube or Vimeo, ensure you are logged in.

• Click on Export.

Wait till Wondershare Filmora finishes exporting your video. Then, another window will pop up for a reminder when the shipping is done.

These were the methods by which you can change the speed of your video using the Speed Adjustment panel. Now let’s move on to the following method to adjust the speed via the Duration panel.

2. Change Speed via the Duration Panel

The duration panel is one the most valuable features of Wondershare Filmora as it allows you to change the video speed by duration adjustment.

This feature is typically helpful when you have a space between video clips and want to fill it. By measuring the time between the two clips, you can adjust the duration of your video.

It will ultimately hasten the speed of your video. The hastening in rate will depend upon the gap. The smaller the gap, the faster the video will be. Similarly, the greater the gap is, the longer the video will be.

Apart from the Speed Adjustment Panel, the Duration Panel has the advantage of editing the speed of your video by simply typing in the text.

Step1 Import Video Clips to Timeline

After downloading Filmora, the next step is importing your video clips. To do so, follow the steps outlined below:

• Locate and click the Import icon in the upper left corner of the Filmora Home Interface.
• Choose the videos to be edited, then click OK.

Now that you have imported files into Filmora, you can add them to the Timeline. Notice the steps mentioned ahead:

• Drag the clips into the import window and select them.
• Then, insert them into the timeline.

You can begin the editing process now that the clips are in the timeline.

Step2 Open The Duration Panel

The Duration Panel comes attached to the Unifrom Speed Panel. To access the Duration Panel, follow the steps ahead:

• Right-click on the video clip.
• In the pop column, scroll below to Unifrom Speed.

It will open the uniform speed panel in the import window. Below the speed of the controls, you can notice The Duration Panel.

Step3 Change The Speed of The Video

In The Duration Panel, you can see the average speed of your video clip. Now, if you want to reduce the speed of your video, you have to increase the duration of your video. Similarly, if you’re going to increase the speed of your video, you would have to decrease the duration.

Slow Down The Video

To slow down the video clip, follow the steps mentioned below:

• In The Duration Panel, Increase the time of the video.
• Type in a number bigger than the normal value

Note: If the average speed of the video is 00:01:00:00, increasing the value of the duration to 00:02:00:00 will reduce the speed of your video by half.

Speed Up The Video

To increase the speed of your video, follow as guided ahead:

• In The Duration Panel, decrease the time of the video.
• Type in a number smaller than the normal value

Note: If the normal video speed is 00:01:00:00, decreasing the value of the duration to 00:00:30:00 will increase the speed of your video by double.

Congratulations! You have successfully learned how to change the speed of your video by Filmora. Now, you can use both the Speed Adjustment Panel and The Duration Panel to adjust the speed of your video.

Conclusion

Changing the speed of your video can be helpful in many filming scenarios. Adjusting the speed in the older days was a marvel in the video editing industry. But the technology in the present day has allowed the typical user to edit the speed of a video.

By following the steps mentioned in this article, you can now change the speed of your video by Wondershare Filmora.

Ultimate Guide on How to Film Better in Public

Filming in public and different locations can add a new dimension to any video. The possibilities are limitless, from the hustle and bustle of a busy city street to the tranquil beauty of a remote beach.

Suppose you’re a new vlogger and want to capture the perfect scene in public. Then this blog is for you. It will explain various tips and tricks to help you create the best videos, regardless of location. So let’s start and learn more about how to film better in public!

Part 1. What Gear Will You Need to Record a Better Video in Public?

While recording in public, you want to avoid setting and holding unnecessary camera gear. That’s why you should keep your gear as low-key as possible. The essential shooting gears that you are going to need are as follows:

A Good Camera

A good camera is essential to record a video in public because it will provide quality footage. It will also allow you to capture more detail and create more engaging videos. But if you use a phone instead, make sure it is the latest iPhone or other with high pixels camera.

A Tripod

A tripod is essential when recording video in public to ensure that your shots are stable and steady. Without a tripod, your camera can shake and create a distorted, blurry image that can ruin a shot. So having a secure tripod will help you capture professional-looking footage.

A Microphone

A microphone is essential for recording a video in public because it captures the sound in the environment, allowing the video to be recorded with better-quality audio. Without a microphone, the video would be recorded with distorted sound and would likely be challenging to understand.

Apart from the gear mentioned above, you can also bring an ND filter, extra batteries, and SD cards. Because If the battery runs out or the SD card becomes full, the video recording could be lost. The spare batteries and SD cards help to ensure that the video can be captured uninterrupted. Let’s see what we need further.

Part 2. What Do You Need to Accomplish With Your Video?

While recording a video in a busy location, you need to accomplish three things with your video to record it better. Which are as follows:

1. Clean Shots

When recording in a busy location, it is essential to try and capture clean shots. It can be done by using a wide-angle lens to get the full shot or zooming in to focus on a particular element.

2. Clean Audio

Getting a clean and clear sound when recording audio in a busy location is essential. A good quality microphone, an audio recorder, or external noise reduction can help minimize background noise and capture the desired audio.

3. Decent Lighting

In a busy location, decent lighting is as important as the other two factors. Look for natural light sources that can provide good light, even illumination. If these are unavailable, consider using portable lighting equipment or lamps to create a more flattering environment.

Now that we know what we need let’s see how to make a video.

Part 3. How to Get the Best Shot While Filming Outdoor?

Whether you are a vlogger, a YouTuber, or a student filmmaker, shooting a video in a busy area is always a challenge. You must be able to plan and execute your production in a way that minimizes disruption and produces quality footage. By following these instructions, we hope you can make a difference in a shot you record:

Step1 Scout the Location

Before recording, visit the location in advance to plan your shots. Take note of potential distractions or noise sources and plan your angles accordingly.

Step2 Choose the correct shooting time

The best time to record a video in a busy location is when the area is less crowded, such as early in the morning or late at night. Avoiding peak times and holidays is also a good idea.

Step3 Choose the right angle

Once you get to the location, you must find the right angle.

Select Background

Try to find a background that will best capture the atmosphere of the area and minimize any background noise.

Set the frame

If your frame is too broad, you will face potential distractions that could interfere with your video, such as people walking in and out of the frame.

Set your position

Instead of getting closer to your talent, get further away and zoom in this way, you leave space for other people in the location, and you can still get your shot!

Try to get your shot and then get out quickly so you don’t bother other people trying to get their photos.

Part 4. Best Way to Record Audio While Filming Outdoor

Audio is essential to any video production, and recording audio while filming outdoor scenes can be challenging.

Outdoor environments come with more variables to consider, such as wind, traffic noise, and other background noise, that can make capturing clear audio more difficult. Even if you use a high-quality mic, you still have chances of interruption.

If you get any such variable in the video you recorded, you can re-record the audio with the help of Wondershare Filmora . Let’s see how you can do it:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 First, select the clip you want to re-record and then drag it onto the timeline.

Step2 Right-click on the video you dragged and then click on the Detach Audio. After doing that, mute the lousy audio from the audio timeline.

Step3 Place the playhead at the clip’s start, click Record just above the import media section, and then click Record Voiceover.

Step4 Now select a recording device and then select the time for the countdown. For example, a 3-minute timer would be perfect.

Step5 Click record and try to re-record your line and match it up the best you can. To get the sound and sync right, you might need to attempt a few times, but in the end, it will improve the quality of your video.

This technique is used in almost every film you see, especially action sequences that also have dialogue. You can also use this technique with the help of Filmora and enhance your video with better audio quality.

Conclusion

We hope this blog has given you some tips for how to film better in public. Filming in public can be intimidating, but you can shoot professional footage with the proper techniques.

From understanding the legalities of filming in public to learning to be discreet and respectful of your environment, you can ensure your filming experience is positive and successful.

With these tips and some practice, you’ll be on your way to shooting great videos in public!

Let us know your favorite film location in the comments below.

Free Download For macOS 10.14 or later

Step1 First, select the clip you want to re-record and then drag it onto the timeline.

Step2 Right-click on the video you dragged and then click on the Detach Audio. After doing that, mute the lousy audio from the audio timeline.

Step3 Place the playhead at the clip’s start, click Record just above the import media section, and then click Record Voiceover.

Step4 Now select a recording device and then select the time for the countdown. For example, a 3-minute timer would be perfect.

Step5 Click record and try to re-record your line and match it up the best you can. To get the sound and sync right, you might need to attempt a few times, but in the end, it will improve the quality of your video.

This technique is used in almost every film you see, especially action sequences that also have dialogue. You can also use this technique with the help of Filmora and enhance your video with better audio quality.

Conclusion

We hope this blog has given you some tips for how to film better in public. Filming in public can be intimidating, but you can shoot professional footage with the proper techniques.

From understanding the legalities of filming in public to learning to be discreet and respectful of your environment, you can ensure your filming experience is positive and successful.

With these tips and some practice, you’ll be on your way to shooting great videos in public!

Let us know your favorite film location in the comments below.

Discover the Essential Steps for Editing a Music Video in This Guide. Learn About Aspect Ratio and the First Cut Process to Create a Visually Captivating Video

Are you planning to edit your music video? Do you need on out how to edit your first music video draft? Editing a music video is a creative task but can be challenging.

One of the key elements of this process is selecting the aspect ratio and making the first cut. In this blog, we will explore these steps in detail, providing important tips and tricks. Whether you’re a beginner or an experienced editor, get ready to take your music video to the next level. Let’s get started.

Which software will you need?

As we have a lot of software in the market, we must select the right software for high-quality editing. Wondershare Filmora is an amazing video editing software. It offers a ton of video editing tools. You can add special effects, transitions, and more to make your music video captivating.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

How To Add Motion Blur Effect To Photos in GIMP

GIMP is a cross-platform image editing software that you can use to edit photos and create graphics. The software is available for Linux, Windows, and macOS and can add a motion blur effect (A sense of movement in the photo), making your pictures look more realistic and professional.

So to help you tone your skills, we’ve written a comprehensive guide on how to apply the GIMP motion blur effect to your photos!

Part I. What Is GIMP?

GIMP software, a GNU Image Manipulation Program, is an open-source raster graphics editor used for image editing and retouching, converting between different image formats, free-form drawing, and more.

GIMP is frequently used as a Photoshop alternative. The software boasts a wide range of features, including support for layers, masks, color management, and third-party plugins.

Key Features

Here are some key features of the GIMP software:

• Quickly hide panels and menus to let you switch to a full-screen mode to preview pictures
• Fixes distorted images
• Available for Windows, Linux, Mac OS, and other operating systems
• Automatic image enhancement tool
• Lets you remove all the panels and tools from the workflow except the one you are working with.
• Released under a license called GNU General Public License v3 and later, which makes it free to use and distribute
• Add overlays and crop or resize an image
• Wide range of file formats that it can read and write, making it a versatile tool for working with images

Part II. How To Add The Motion Blur Effect To Your Photos in GIMP?

Below we’ve provided the step-by-step tutorial to add a motion blur effect to your photos in GIMP:

Step1 In the first step, launch a browser on your device, head to the GIMP website , and download the installation file according to your operating system. Now, click the downloaded installer, install the software on your system and launch it.

Step2 In the next step, click “File” on the GIMP dashboard, and select “Open” to access the Open Image window. Select your image file from your system and click “Open” to import the file.

Step3 Next, click the “Filters” option from the top toolbar, select “Blur,” and choose “Motion Blur” from the drop-down menu. A dialogue box will now open where you can preview the effect and adjust the settings, including Blur Type, Blur Center, and Blur Parameters.

Step4 Once you are satisfied with your changes, click “OK” to apply the effect to the image, and make some other edits if needed. Finally, click “File” from the top toolbar, choose “Export As,” click “File Type” to select the format, and select the “Export” option to save your file.

Bonus Tips – The Alternative To GIMP To Create Motion Blur Effect

GIMP is a popular image editor that you can use to create motion blur effects. However, some users find it difficult to use the software for this purpose.

To simplify the process, we recommend usingWondershare Filmora an all-in-one editing software that offers multiple advanced features to help you quickly enhance your project.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Here’s why Filmora is the best alternative to GIMP for creating motion blur effects:

• A user-friendly interface where you can quickly create the motion blur effect without spending hours learning the process
• Advanced video editing tools, such as keyframing, speed ramping, green screen, title editing, motion tracking, screen recorder, and preset templates
• Royalty-free music library where you can access millions of music and soundtracks
• Adds the motion blur effect to your videos as well as images
• Comes with multiple parameters to adjust the effect on your clip or image

To add the radial blur effect to images using Filmora, here are the quick and easy-to-follow steps:

Step1 Download the Filmora software on your PC, launch it, and click “Create New Project” on the main panel. Use the “Click Here to Import your Media File” option to import your photo and drag and drop it into the timeline.

Step2 Now, head to the “Effects” tab from the taskbar. Use the search option to find the Blur effect. Afterward, drag & drop it in the timeline and adjust it on your selected clip.

Step3 Please note that motion blur is now a dynamic effect on the image. That means you can add multiple photos and make them into a slideshow with a blur effect transition. Or, press the “Play” icon to preview your photo and pause the clip where you think motion blur works best.

Step4 Click the effect in the timeline to open its settings. Now, play your clip to preview and adjust the parameters as you want to smooth down the motion effect.

Step5 Once satisfied with the outcome, click the “Export” option, go to the “Local” tab, select a file format to save the images, and click “Export” again to save your project.

Filmora offers many export options, such as your device, YouTube, Vimeo, and DVD, with just a few clicks.

Last Words

In this detailed tutorial, we’ve discussed what GIMP is and its key features. We’ve provided a step-by-step guide to walk you through the process of creating the motion blur effect using the GIMP software.

In addition, we’ve provided a bonus tip to recommend Filmora as the best alternative to GIMP for creating the motion blur effect.

Hopefully, you found this article helpful in resolving your queries, and you can now add a smooth motion blur effect to your images.

Free Download For macOS 10.14 or later

Here’s why Filmora is the best alternative to GIMP for creating motion blur effects:

• A user-friendly interface where you can quickly create the motion blur effect without spending hours learning the process
• Advanced video editing tools, such as keyframing, speed ramping, green screen, title editing, motion tracking, screen recorder, and preset templates
• Royalty-free music library where you can access millions of music and soundtracks
• Adds the motion blur effect to your videos as well as images
• Comes with multiple parameters to adjust the effect on your clip or image

To add the radial blur effect to images using Filmora, here are the quick and easy-to-follow steps:

Step1 Download the Filmora software on your PC, launch it, and click “Create New Project” on the main panel. Use the “Click Here to Import your Media File” option to import your photo and drag and drop it into the timeline.

Step2 Now, head to the “Effects” tab from the taskbar. Use the search option to find the Blur effect. Afterward, drag & drop it in the timeline and adjust it on your selected clip.

Step3 Please note that motion blur is now a dynamic effect on the image. That means you can add multiple photos and make them into a slideshow with a blur effect transition. Or, press the “Play” icon to preview your photo and pause the clip where you think motion blur works best.

Step4 Click the effect in the timeline to open its settings. Now, play your clip to preview and adjust the parameters as you want to smooth down the motion effect.

Step5 Once satisfied with the outcome, click the “Export” option, go to the “Local” tab, select a file format to save the images, and click “Export” again to save your project.

Filmora offers many export options, such as your device, YouTube, Vimeo, and DVD, with just a few clicks.

Last Words

In this detailed tutorial, we’ve discussed what GIMP is and its key features. We’ve provided a step-by-step guide to walk you through the process of creating the motion blur effect using the GIMP software.

In addition, we’ve provided a bonus tip to recommend Filmora as the best alternative to GIMP for creating the motion blur effect.

Hopefully, you found this article helpful in resolving your queries, and you can now add a smooth motion blur effect to your images.

Also read: