In This Article, You Will Learn How to Create an Attractive and Engaging Slideshow Video Using Tools Available in the Wondershare Filmora

You have taken photos and videos all over your trip. Showing them to your friends and family can be a hassle if you have a lot of pictures. Viewing them all at once is possible by creating a slideshow video.

The slideshow video combines all the memories in one place. To make one on your own, we prefer just one best UI editing tools, Wondershare Filmora.

Before we create a slideshow, ensure to learn the basics of the slideshow video. Then, scroll below to get more!

Part 1. What Is a Slideshow Video?

A slideshow video is a video that combines your photos and videos to create a montage. This slideshow can be used as a collection of memories you can watch whenever you like.

You might have a photo album lying around somewhere in your house. A slideshow video can act like a modern-day photo album. But instead of photos, you can also add videos and create a monument of your precious memories.

Modern-day content creators on Youtube and other platforms can use a slideshow method to create short recap videos of their travels.

Part 2. What Are Some of the Uses of Slideshow Videos?

A slideshow video can be a great way to summarize all the moments of a marriage ceremony, graduation event, etc. And the list goes on and on.

• A wedding ceremony
• Anniversary recording
• A graduation ceremony
• A birthday party
• Your pet
• Your friends
• Your family
• A trip that you went on

Part 3. What Are the Benefits of a Slideshow?

There are many benefits to creating a slideshow video.

A long-lasting memory

Creating a slideshow video can be a digital reminiscent, allowing you to hold a precious video with your friends and family. Apart from physical portraits, a slideshow video will be a digital backup for your memories that you can watch in the future.

Easy to save and share

Since a video slideshow is a digital content, typically with an extension .mp4, .mov, etc., you can watch it whenever and wherever you want. Moreover, you can conveniently send it to the person who spent the time and shares the same memories with you.

Part 4. What Will You Need To Make a Slideshow?

To create an attractive slideshow video, you must fulfill the following requirements.

1. Good Quality Photos

To create a good slideshow, you must have good-quality photos with good resolution. Always take pictures with a good-quality camera or a mobile phone whenever you want to create a slideshow. Using filters in the editing software can disrupt the quality of your slideshow.

2. Video Clips

The slideshow is always combined with videos and photos. After taking good-quality images, remember always to record short video clips you can add between your pictures.

3. A Good Video Editor - Wondershare Filmora

To edit a slideshow video, you will need editing software. There’s no better tool to do the job than Wondershare Filmora . Wondershare Filmora enables you to make creative and appealing videos. It has a very engaging system UI that allows even novice users to get the hang of it quickly. You will learn how to make a slideshow in a few simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Let’s start with the step-by-step instructions for making a slideshow video now that you know the requirements for generating a slideshow.

Part 5. Step-by-Step Guide to Creating a Slideshow Video

Utilizing filmora will reduce your workload while producing quality work. Follow the below step-by-step guide to make your slideshow video instantly!

Step1 Download Wondershare Filmora

Wondershare Filmora will provide the working platform. Follow the below steps to download it:

• First, install the Wondershare Filmora.
• Then, launch this application on your PC or Mac

Let’s proceed to edit our video after downloading the Wondershare Filmora software. Continue reading to find out how to begin the editing process.

Step2 Import your Photos and Videos

Importing your videos and pictures to Filmora’s media panel is best to have them all in one folder. Therefore, when you open Wondershare Filmora, you will notice the main import window in the top left corner.

• Click in the center of the import window upon the import icon.
• Browse from the PC library to where your target Videos and Photos are stored.
• Please select the required videos and photos and Open

Your next step will be to add the imported videos and images to the timeline.

Step3 Add your Photos and Videos to the Timeline

When you have multiple videos and photos, you can add all of them simultaneously. Or you can also add them one by one wherever you need. Follow the steps mentioned:

• Right-click on the photo or video you want.
• Keep holding the Right-click and drag it down to the timeline.

Now that we have imported your photos and videos into the timeline, it is time to align and add text.

Step4 Add the Title

To create an attractive slideshow, you will need to add a title before the start of the video. Doing so will allow you to gain more viewers and audiences.

Add a Black Screen

The black screen will eventually act like a canvas to give your title a good look. To add a black screen, follow the steps mentioned:

• Click on the media icon from the bar above the import window.
• You will notice many tabs on the left-hand side under a drop-down bar.
• Scroll below to find the sample media
• Download the black color if it is not downloaded already.
• Click and drag it down below to the start of your video.

Add a Title Tile

Now that we have our canvas, we will now add the title. Above the import media library, there will be a Title icon.

• Click on the title icon, and select the title that you want for your video by browsing and scrolling down.
• For this purpose, we will use a simple title tile called “Title 29.”

Note: You can find the same title by scrolling, browsing, or searching in the search bar above the import library.

• Click and drag the title onto the black screen that we added.
• Double-click the title to open its settings.
• Here you can type in the text that you want.

You can also change its font. When you click on the font bar, a drop-down option will pop up, and you choose whichever you like.

• Change the animation of the text title from the top left corner animation

Change The Timing of The Title

You can also adjust the timing of the title by below steps:

• Click on the advanced option in the bottom right corner, and settings will pop up.
• Find the title bar and drag it to the right side to increase the timing of the title.

After adding the title, it’s time to go with fading effect as shown below!

Step5 Add a Fade effect

You can also add a fade transition to the start of your video. It will blend the title with the first clip. Follow the steps mentioned to add the transition effects:

• Search the Fade option from the Transitions tab above the import window

Note: A fade transition will allow your title to fade into the first clip creating a visually pleasing effect.

• Download the Fade transition and drag it between the Black screen and the first clip.

Now that we have added a transition, it is time to move on to our music!

Step6 Add The Music

You can add your music to the slideshow from your PC library, but make sure you have the music rights. It is better to use stock audio by following the steps:

• Click on the Audio icon on the bar above the import window, and the list will pop up.
• Please browse the library to find music that best suits your video and download it.
• Then add it to the timeline’s audio track.

Add Beat Detection

To match your video clips properly with the music, so it remains in sync, you can adjust it with the beat of the music. To add beat detection, follow the steps mentioned:

• Right-Click on the audio that you selected in the audio library.
• You will see a pop-up list, and in the options, you will see Beat detection.
• Click on Beat detection.

• Then click on the audio and drag it below on the timeline.

Match The Video With The Audio Markers

To have the full advantage of beat detection, you must adjust your videos and photos to the markers. Follow the steps mentioned below to do so:

• Check that the video clips are in sync with the marker on the audio.
• For this, drag one video end to a marker or as many videos as you want.
• Ultimately, you will create a timeline in which your videos sync with the audio beat.

After syncing your videos and photos to the audio, it is time to move on to the scaling and background blur.

Step7 Scale and Blur The Background

Now, some of the pictures you have added must-have black borders. It usually means that your image is shorter than the aspect ratio.

If you leave the picture/photo as it is, the black borders will make it look shorter and out of proportion. As a result, it gives a generally poor look, as shown below.

To counter this problem, follow some easy steps:

• Double-click on the picture with black borders, and it will open the settings list.
• Go into the Transform Here you can see multiple settings.
• Increase the size of your photo to match the aspect ratio.

Add a Background Blur Effect

In some cases where you have taken a portrait photo where the picture is vertical, it ultimately stays out of proportion to the aspect ratio.

Note: Simply scaling the image to match the aspect ratio size is not sensible in this case. Doing so will hide the many pretty features of a portrait.

To counter this problem, you can add a blur effect. This effect will turn your background blur, matching the aspect ratio. Follow the steps mentioned below:

• Click on the Effects tab above the import window and search for Blur.
• Download the blur effect that suits you best and then drag the blur effect above your photo in the timeline.

You will notice the background turn to a blur in the main play screen.

Step8 Add a Transition

You can also add a transition effect to spice up things. It can get bland when your video or photo changes from one to another. To create a good slideshow video, you can add a transition effect by following the steps mentioned below:

• Click on the Transition icon above the import window.
• Browse the library until you find a transition you like, then download one.
• Click on the transition and drag it between the clips.

Adjust The Duration and Placement of The Transition

Now it’s time to adjust the duration and placement of the transition. For this, you can follow the steps mentioned below:

• Double-click on the transition effect, and it will open the settings list.
• You can adjust the duration by setting the timer as per your requirement.

Note: If other transitions are added to the timeline, you can adjust them by clicking Apply to all.

When you have adjusted the slideshow transitions, it is time to move on to the effects and filters.

Step9 Add the Effects and Filters

If you create a slideshow video of your trip to a historical place. You can add a Vintage filter to your video to give it that vintage tint. Follow the steps mentioned below:

• Head over to the Effects tab, where the effects library will open up
• Select any effect and download
• Click on the effect and drag it to drop in the timeline.

Combining a vintage effect with a dreamy glow will make your video pop up even more. To add a nostalgic glow to your video, follow the steps:

• Click on the effects and search for Glow in the search bar.
• Click and drag the glow effect above the timeline and ensure the effect is in the separate video timeline.
• Ensure the effect is applied to every photo and video.
• Double-click on the effect, and settings will open in the import window.
• Then, you can adjust the radius and opacity of the video. Adjust as you desire.

We are almost done. Let us now move toward our outro!

Step10 Create an Outro

The steps we will do will be similar to the ones we did initially. As we are creating, we will again need a canvas. Follow the steps mentioned below:

• Head to the media icon on the bar and scroll until you see the sample media tab.
• In the sample color option, drag and drop the black color at the end of your video.

Add an Outro Transition

To finalize things, add a transition effect at the end of the clip by these steps:

• In the Transition tab, search for the Fade effect.
• Drag and drop the Fade effect between your last video clip and the Black screen.

Fade out The Audio

If the audio suddenly ends at the end of your slideshow, it will create a bitter effect. Therefore, you should always fade out audio at the end of the video. To do this, follow the steps mentioned:

• Double-click on the audio in the timeline, and the settings list will pop up.
• On the top section of the import window, you will notice fade options.
• In the fade-out bar, drag it to the side to set your fade-out timer.

You can show your friends and family the slideshow or upload it to Youtube. Play the Slideshow Video from the beginning to see the changes.

Conclusion

By the steps mentioned above, you can create a slideshow video. Give every moment a chance to align everything on one side! The slideshow will also save your device space by aligning everything in one video.

Free Download For macOS 10.14 or later

Let’s start with the step-by-step instructions for making a slideshow video now that you know the requirements for generating a slideshow.

Part 5. Step-by-Step Guide to Creating a Slideshow Video

Utilizing filmora will reduce your workload while producing quality work. Follow the below step-by-step guide to make your slideshow video instantly!

Step1 Download Wondershare Filmora

Wondershare Filmora will provide the working platform. Follow the below steps to download it:

• First, install the Wondershare Filmora.
• Then, launch this application on your PC or Mac

Let’s proceed to edit our video after downloading the Wondershare Filmora software. Continue reading to find out how to begin the editing process.

Step2 Import your Photos and Videos

Importing your videos and pictures to Filmora’s media panel is best to have them all in one folder. Therefore, when you open Wondershare Filmora, you will notice the main import window in the top left corner.

• Click in the center of the import window upon the import icon.
• Browse from the PC library to where your target Videos and Photos are stored.
• Please select the required videos and photos and Open

Your next step will be to add the imported videos and images to the timeline.

Step3 Add your Photos and Videos to the Timeline

When you have multiple videos and photos, you can add all of them simultaneously. Or you can also add them one by one wherever you need. Follow the steps mentioned:

• Right-click on the photo or video you want.
• Keep holding the Right-click and drag it down to the timeline.

Now that we have imported your photos and videos into the timeline, it is time to align and add text.

Step4 Add the Title

To create an attractive slideshow, you will need to add a title before the start of the video. Doing so will allow you to gain more viewers and audiences.

Add a Black Screen

The black screen will eventually act like a canvas to give your title a good look. To add a black screen, follow the steps mentioned:

• Click on the media icon from the bar above the import window.
• You will notice many tabs on the left-hand side under a drop-down bar.
• Scroll below to find the sample media
• Download the black color if it is not downloaded already.
• Click and drag it down below to the start of your video.

Add a Title Tile

Now that we have our canvas, we will now add the title. Above the import media library, there will be a Title icon.

• Click on the title icon, and select the title that you want for your video by browsing and scrolling down.
• For this purpose, we will use a simple title tile called “Title 29.”

Note: You can find the same title by scrolling, browsing, or searching in the search bar above the import library.

• Click and drag the title onto the black screen that we added.
• Double-click the title to open its settings.
• Here you can type in the text that you want.

You can also change its font. When you click on the font bar, a drop-down option will pop up, and you choose whichever you like.

• Change the animation of the text title from the top left corner animation

Change The Timing of The Title

You can also adjust the timing of the title by below steps:

• Click on the advanced option in the bottom right corner, and settings will pop up.
• Find the title bar and drag it to the right side to increase the timing of the title.

After adding the title, it’s time to go with fading effect as shown below!

Step5 Add a Fade effect

You can also add a fade transition to the start of your video. It will blend the title with the first clip. Follow the steps mentioned to add the transition effects:

• Search the Fade option from the Transitions tab above the import window

Note: A fade transition will allow your title to fade into the first clip creating a visually pleasing effect.

• Download the Fade transition and drag it between the Black screen and the first clip.

Now that we have added a transition, it is time to move on to our music!

Step6 Add The Music

You can add your music to the slideshow from your PC library, but make sure you have the music rights. It is better to use stock audio by following the steps:

• Click on the Audio icon on the bar above the import window, and the list will pop up.
• Please browse the library to find music that best suits your video and download it.
• Then add it to the timeline’s audio track.

Add Beat Detection

To match your video clips properly with the music, so it remains in sync, you can adjust it with the beat of the music. To add beat detection, follow the steps mentioned:

• Right-Click on the audio that you selected in the audio library.
• You will see a pop-up list, and in the options, you will see Beat detection.
• Click on Beat detection.

• Then click on the audio and drag it below on the timeline.

Match The Video With The Audio Markers

To have the full advantage of beat detection, you must adjust your videos and photos to the markers. Follow the steps mentioned below to do so:

• Check that the video clips are in sync with the marker on the audio.
• For this, drag one video end to a marker or as many videos as you want.
• Ultimately, you will create a timeline in which your videos sync with the audio beat.

After syncing your videos and photos to the audio, it is time to move on to the scaling and background blur.

Step7 Scale and Blur The Background

Now, some of the pictures you have added must-have black borders. It usually means that your image is shorter than the aspect ratio.

If you leave the picture/photo as it is, the black borders will make it look shorter and out of proportion. As a result, it gives a generally poor look, as shown below.

To counter this problem, follow some easy steps:

• Double-click on the picture with black borders, and it will open the settings list.
• Go into the Transform Here you can see multiple settings.
• Increase the size of your photo to match the aspect ratio.

Add a Background Blur Effect

In some cases where you have taken a portrait photo where the picture is vertical, it ultimately stays out of proportion to the aspect ratio.

Note: Simply scaling the image to match the aspect ratio size is not sensible in this case. Doing so will hide the many pretty features of a portrait.

To counter this problem, you can add a blur effect. This effect will turn your background blur, matching the aspect ratio. Follow the steps mentioned below:

• Click on the Effects tab above the import window and search for Blur.
• Download the blur effect that suits you best and then drag the blur effect above your photo in the timeline.

You will notice the background turn to a blur in the main play screen.

Step8 Add a Transition

You can also add a transition effect to spice up things. It can get bland when your video or photo changes from one to another. To create a good slideshow video, you can add a transition effect by following the steps mentioned below:

• Click on the Transition icon above the import window.
• Browse the library until you find a transition you like, then download one.
• Click on the transition and drag it between the clips.

Adjust The Duration and Placement of The Transition

Now it’s time to adjust the duration and placement of the transition. For this, you can follow the steps mentioned below:

• Double-click on the transition effect, and it will open the settings list.
• You can adjust the duration by setting the timer as per your requirement.

Note: If other transitions are added to the timeline, you can adjust them by clicking Apply to all.

When you have adjusted the slideshow transitions, it is time to move on to the effects and filters.

Step9 Add the Effects and Filters

If you create a slideshow video of your trip to a historical place. You can add a Vintage filter to your video to give it that vintage tint. Follow the steps mentioned below:

• Head over to the Effects tab, where the effects library will open up
• Select any effect and download
• Click on the effect and drag it to drop in the timeline.

Combining a vintage effect with a dreamy glow will make your video pop up even more. To add a nostalgic glow to your video, follow the steps:

• Click on the effects and search for Glow in the search bar.
• Click and drag the glow effect above the timeline and ensure the effect is in the separate video timeline.
• Ensure the effect is applied to every photo and video.
• Double-click on the effect, and settings will open in the import window.
• Then, you can adjust the radius and opacity of the video. Adjust as you desire.

We are almost done. Let us now move toward our outro!

Step10 Create an Outro

The steps we will do will be similar to the ones we did initially. As we are creating, we will again need a canvas. Follow the steps mentioned below:

• Head to the media icon on the bar and scroll until you see the sample media tab.
• In the sample color option, drag and drop the black color at the end of your video.

Add an Outro Transition

To finalize things, add a transition effect at the end of the clip by these steps:

• In the Transition tab, search for the Fade effect.
• Drag and drop the Fade effect between your last video clip and the Black screen.

Fade out The Audio

If the audio suddenly ends at the end of your slideshow, it will create a bitter effect. Therefore, you should always fade out audio at the end of the video. To do this, follow the steps mentioned:

• Double-click on the audio in the timeline, and the settings list will pop up.
• On the top section of the import window, you will notice fade options.
• In the fade-out bar, drag it to the side to set your fade-out timer.

You can show your friends and family the slideshow or upload it to Youtube. Play the Slideshow Video from the beginning to see the changes.

Conclusion

By the steps mentioned above, you can create a slideshow video. Give every moment a chance to align everything on one side! The slideshow will also save your device space by aligning everything in one video.

Track Mattes: The Ultimate Guide For After Effects

Are you wondering what Track Mattes is? In After Effects, this tool adds an invisible layer that is used to mask or reveal parts of a layer, including video, graphics, text, shapes, and images. This feature is in the arsenal of any visual effects artist or motion graphic designer.

For After Effects editors, Track Mattes can be an incredibly helpful tool for managing multiple layers and creating complex animations.

In this article, we’ll explore everything you need to know about Track Mattes. We’ll cover topics like the difference between a mask and Track Matte, finding this tool in After Effects, and its four options: Alpha Matter, Alpha Inverted Matte, Luma Matte, and Luma Inverted Matte.

1. Alpha Matte
2. Alpha Inverted Matte
3. Luma Matte
4. Luma Inverted Matte
5. Differences Between Alpha Channel and Luma Channel

Part 1. What Are Track Mattes In After Effects?

A Track Matte is an element used in video editing to control the opacity of a layer. Essentially, it lets you create a “hole” in a layer so that underlying layers can show through. This tool can be used with video and audio layers, which is essential for creating complex composites in After Effects.

You can use Track Mattes to generate shapes, reveal part of a layer, or keying outs. Interestingly, it remains independent of all layers in your projects, which means you can get visual effects and animations more efficiently than with the masks tool.

Moreover, Track Mattes uses Alpha or Luma channels as a layer mask to determine what parts of the layer to reveal. For instance, you can make a top layer that provides an Alpha or Luminous effect and a bottom layer consisting of the image that will be revealed or shown.

Thus, if you want to use an image to hide your video until you want to unveil it or add a picture in your text, Track Mattes will help you to shape the appearance of a layer above it.

Part 2. Differences Between A Mask And A Track Matte

In Adobe After Effects, there are two types of masking tools: Masks and Track Mattes. Both are used to hide or reveal a portion of a layer.

Here’re some key differences between a Mask and a Track Matte:

1. A mask is dependent on a specific layer, while the Track Matter is independent of any layer.
2. A mask is applied directly to a layer having an image or a video and transforms with the layers. On the other hand, Track Matte is a stationary mask applied to the composition rather than a layer.

Part 3. Finding The Track Matte Tool In After Effects

Track Matte is located by default in the Timeline Window of the After Effects interface, but if it is unavailable there for some reason, toggle the Transfer Control Pane button on the bottom-left of the timeline.

If you are still unable to find the Track Matte option, press the F1 key or do the following steps in sequence:

1. Right-click on the area above your layers and select “Columns.”
2. Scroll down and click the “Modes” option to enable it.

1. Track Matte mode, Preserve Underlying Transparency, and Blending Modes will be available now.

Under Track Matte’s drop-down menu, you can find four further options, two with Alpha and two with Luma. We’ll discuss these options in detail in the next section.

Part 4. All Four Track Matte Options In After Effects

After Effects provides four types of Track Matte options: Alpha Matte, Alpha Inverted Matte, Luma Matte, and Luma Inverted Matte, each has its own specific use case. But first, you need to understand what Alpha and Luma are:

Alpha: This Track Matte type uses the layer’s Alpha channel to determine the layer’s opacity.

Luma: This Track Matte type uses the top layer’s brightness to mask the bottom layer.

Let’s find out the functions of each option one by one:

Alpha Matte

Alpha Matte is an important option under the Track Matte menu, as it allows you to create a mask based on the transparency of the layer you are using it on. Like the mask, it will use any pixel above 0% opacity and can be useful for various purposes, such as creating a vignette or isolating a certain area of the frame.

Alpha Inverted Matte

The Alpha Inverted Matte option is quite the opposite of the Alpha Matte, and around the Alpha channel, it uses negative space from the above layer and will therefore use pixels with 0% opacity as it had 100% opacity.

Luma Matte

Instead of using the Alpha channel, Luma Mattes uses the brightness level or Luma channel of the upper layer to create a mask for the bottom layer.

Luma Inverted Matte

Opposite of the Luma Matte, the Luma Inverted Matte uses dark or low luminance areas of the upper layer to create a mask for the lower layer.

Differences Between Alpha Channel and Luma Channel

When altering the opacity of a layer, it may look like the brightness settings are changed. This might confuse some users, as both Alpha and Luma channels carry the same information. However, they differ in how they are used.

Alpha channel is a type of Track Matte that stores transparency information. This information determines how opaque or transparent a layer will be when superimposed over another layer.

On the other hand, a Luma channel is a video track that stores brightness information. This information is used to determine how bright or dark an image will be and is further divided into three channels, i.e., Red, Green, and Blue (RGB). Their value ranges from 0 to 255, where 0 represents the darkest value while 255 represents the brightest value.

Video – How to use Track Mattes in Adobe After Effects - Tutorial

Conclusion

In this article, we’ve discussed what Track Matte is in After Effects and how it differs from the mask tool. We also explored where to find the Track Matter option and its four options, i.e., Alpha Matte, Alpha Inverted Matte, Luma Matte, and Luma Inverted Matte. In the end, we discussed the difference between the Alpha and Luma channels to provide a clear view of the two.

Hopefully, this guide resolves your queries, and you now have a better understanding of the Track Matte tool in After Effects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 1. What Are Track Mattes In After Effects?

A Track Matte is an element used in video editing to control the opacity of a layer. Essentially, it lets you create a “hole” in a layer so that underlying layers can show through. This tool can be used with video and audio layers, which is essential for creating complex composites in After Effects.

You can use Track Mattes to generate shapes, reveal part of a layer, or keying outs. Interestingly, it remains independent of all layers in your projects, which means you can get visual effects and animations more efficiently than with the masks tool.

Moreover, Track Mattes uses Alpha or Luma channels as a layer mask to determine what parts of the layer to reveal. For instance, you can make a top layer that provides an Alpha or Luminous effect and a bottom layer consisting of the image that will be revealed or shown.

Thus, if you want to use an image to hide your video until you want to unveil it or add a picture in your text, Track Mattes will help you to shape the appearance of a layer above it.

Part 2. Differences Between A Mask And A Track Matte

In Adobe After Effects, there are two types of masking tools: Masks and Track Mattes. Both are used to hide or reveal a portion of a layer.

Here’re some key differences between a Mask and a Track Matte:

1. A mask is dependent on a specific layer, while the Track Matter is independent of any layer.
2. A mask is applied directly to a layer having an image or a video and transforms with the layers. On the other hand, Track Matte is a stationary mask applied to the composition rather than a layer.

Part 3. Finding The Track Matte Tool In After Effects

Track Matte is located by default in the Timeline Window of the After Effects interface, but if it is unavailable there for some reason, toggle the Transfer Control Pane button on the bottom-left of the timeline.

If you are still unable to find the Track Matte option, press the F1 key or do the following steps in sequence:

1. Right-click on the area above your layers and select “Columns.”
2. Scroll down and click the “Modes” option to enable it.

1. Track Matte mode, Preserve Underlying Transparency, and Blending Modes will be available now.

Under Track Matte’s drop-down menu, you can find four further options, two with Alpha and two with Luma. We’ll discuss these options in detail in the next section.

Part 4. All Four Track Matte Options In After Effects

After Effects provides four types of Track Matte options: Alpha Matte, Alpha Inverted Matte, Luma Matte, and Luma Inverted Matte, each has its own specific use case. But first, you need to understand what Alpha and Luma are:

Alpha: This Track Matte type uses the layer’s Alpha channel to determine the layer’s opacity.

Luma: This Track Matte type uses the top layer’s brightness to mask the bottom layer.

Let’s find out the functions of each option one by one:

Alpha Matte

Alpha Matte is an important option under the Track Matte menu, as it allows you to create a mask based on the transparency of the layer you are using it on. Like the mask, it will use any pixel above 0% opacity and can be useful for various purposes, such as creating a vignette or isolating a certain area of the frame.

Alpha Inverted Matte

The Alpha Inverted Matte option is quite the opposite of the Alpha Matte, and around the Alpha channel, it uses negative space from the above layer and will therefore use pixels with 0% opacity as it had 100% opacity.

Luma Matte

Instead of using the Alpha channel, Luma Mattes uses the brightness level or Luma channel of the upper layer to create a mask for the bottom layer.

Luma Inverted Matte

Opposite of the Luma Matte, the Luma Inverted Matte uses dark or low luminance areas of the upper layer to create a mask for the lower layer.

Differences Between Alpha Channel and Luma Channel

When altering the opacity of a layer, it may look like the brightness settings are changed. This might confuse some users, as both Alpha and Luma channels carry the same information. However, they differ in how they are used.

Alpha channel is a type of Track Matte that stores transparency information. This information determines how opaque or transparent a layer will be when superimposed over another layer.

On the other hand, a Luma channel is a video track that stores brightness information. This information is used to determine how bright or dark an image will be and is further divided into three channels, i.e., Red, Green, and Blue (RGB). Their value ranges from 0 to 255, where 0 represents the darkest value while 255 represents the brightest value.

Video – How to use Track Mattes in Adobe After Effects - Tutorial

Conclusion

In this article, we’ve discussed what Track Matte is in After Effects and how it differs from the mask tool. We also explored where to find the Track Matter option and its four options, i.e., Alpha Matte, Alpha Inverted Matte, Luma Matte, and Luma Inverted Matte. In the end, we discussed the difference between the Alpha and Luma channels to provide a clear view of the two.

Hopefully, this guide resolves your queries, and you now have a better understanding of the Track Matte tool in After Effects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Top VHS Sound Effect That You Can Use in Video Making

Do you know why some videos grab your attention more than others? It’s about the visuals and the effects used in those videos. Effects are important in improving the overall experience and making a video more engaging. But it’s not just limited to video effects; audio effects can make a significant difference too. You can create specific themed content by adding effects to your videos.

When it comes to quality content, audio effects can add an extra layer of depth to it. They can transport you to a different time, place, or mood. However, you can create an old vintage-style video and make your audience go “WOW.” You can add an old retro-themed filter to your video, but adding a VHS sound effect is more important. This audio effect will make your video look more authentic and professional.

Part 1: How Are VHS Sound Effects Helpful in Video Creation?

Do you know how much VHS noise sound effects can be helpful? No problem if you don’t know how because this portion is going to answer you anyway.

1. Creates a Nostalgic Ambiance

VHS sound effects can bring back the feeling of nostalgia, just like the visual effects. The distinct sounds associated with VHS, like the gentle hum and hiss, create a vintage ambiance. It can make your video feel more authentic and take viewers back to the time of VHS tapes.

2. Adds Authenticity

Adding VHS audio effects can make your video feel more authentic. Similarly, if you want to recreate the experience of watching content on VHS tapes, this effect can help. Simulating audio imperfections like dropouts and tracking errors can make the video seem more genuine.

3. Sets Time Period

These audio effects help set the period and setting of your video. You can match the sound with the visuals using VHS tape sound effects. Moreover, it creates a consistent audio-visual experience that accurately represents a particular era.

4. Improves Genre and Atmosphere

Such sound effects are particularly effective in genres like horror or suspense. The gritty or distorted audio aesthetic associated with VHS can add depth and intensity to a video. It further improves the experience of your content and engages your audiences.

5. Experimenting Unconventional Techniques

Audio filters like VHS allow filmmakers and video creators to express their artistic style and vision. Using VHS-inspired audio elements, you can experiment with unconventional techniques. It also creates unique and original compositions that stand out from traditional sound designs.

Add VHS Sound Effect to Video

Simply add sound effects on video with Filmora Video Effect Editor ! Experience the magic of cool yet outstanding video effects, where your videos come to life in beautiful visuals.

Apply VHS Sound Effect Apply VHS Sound Effect Learn More >

Try It Free >>

Part 2: Best VHS Sound Effects To Use in 2024

A video is incomplete without good-quality audio and sound effects. So, if you want to create a VHS-style video, make sure to use VHS audio filters as well. Here are some classic VHS sounds you can use for your content.

1. Video Cass. Recorder 06

This audio effect gives your video the nostalgic feel of an old video reel playing. Its VHS-inspired audio effects last for 30 seconds. You can use this effect to create a vintage atmosphere in your videos. This effect can also transport your viewers back to the era of classic video recordings.

2. Creepy Distortion

You can create a haunting and unsettling atmosphere with this sound effect. It adds a creepy VHS sound distortion effect to your content. This effect is perfect for horror or suspenseful scenes. Moreover, this audio filter has a duration of 30 seconds.

3. VCR Deck Insert VHS Ta PE416803

With this audio effect, you can simulate the experience of inserting a tape into a VCR. You can add this effect to your video to enhance the authenticity and realism of a scene. It will help you in a situation where a tape is being loaded into a VCR. The duration of this audio is 20 seconds.

4. VCR Deck Insert VHS Ta PE416801

In this effect, you can hear the sound of someone inserting a tape into a VCR and pressing the play button. You can use this effect when showing scenes of tapes being loaded and played on a VCR. This 10-second audio effect will add an extra layer of realism and nostalgia.

5. VHS Player

Experience the entire process of using a VHS tape with this audio effect. You’ll hear the opening of the VHS box, inserting it into the VCR, followed by the playback sound. Then, there’s the fast-forward effect; additionally, you can enjoy the sound of the fast reverse. Finally, you’ll hear the stop, ejection of the VHS, and the storage of it back into its original box. This effect lasts for 3 minutes and 5 seconds.

6. VCR: Forward

Get the feeling of fast-forwarding through a VHS tape with this sound effect. It lasts 1 minute and 4 seconds and adds the authentic sound of a fast-forwarding VHS tape. You can use this audio effect when you want to add a similar effect to your content.

7. VCR VHS Tape Rewind M PE1046902

You can use this effect in your VHS-styled videos. It produces the sound of a VHS tape rewinding, followed by the VHS pause sound effect. This effect adds a distinct audio cue for rewinding and pausing scenes involving a VHS. The duration of this VHS effect is 4 seconds.

8. VCR: Rewind

Take a trip back in time with the sound of a VHS tape being rewound. This audio file adds a VHS rewind sound effect to your video. The duration of this file is 1 minute and 9 seconds. It will provide the nostalgic sound of a quick rewinding of a VHS tape.

9. Video Cass. Recorder 07

Using this audio effect, you can create the sensation of a video reel playing in a video cassette recorder. This VHS audio filter lasts for 30 seconds. You can use this effect to emphasize the vintage vibe of your video further. It also adds an old-fashioned charm to your video content.

10. VHS Player Rewind

This sound effect, provided by Pixabay, lasts 1 minute and 13 seconds. It starts with a glitchy and nostalgic VHS rewind sound to your video. The audio file brings back memories of vintage technology by adding the VHS rewind effect. You can recreate the experience of the 90s using this audio filter.

Bonus Part: Creating The Best VHS-Themed Videos With Wondershare Filmora

Filmora Video Editor is the ultimate tool and an incredible software for video editing. From audio effects to professional video edits, this tool can do a lot of stuff. This tool is now powered with AI technology which means more features are added in its latest version. You can edit your video and add sound effects that sync with your content feel.

Add VHS Sound Effect For Win 7 or later(64-bit)

Add VHS Sound Effect For macOS 10.14 or later

Try It Free >>

To make such videos having VHS effects, first, you need to learn how to use Wondershare Filmora. If you follow the following steps, you can easily edit your videos.

Step 1Starting Your Project

Open Wondershare Filmora and click on “New Project” to begin. This will bring up a new window where you can get started on your video. Import your video file by selecting the “Import Media” option and choosing the file from your system. Then, drag and drop the video into the timeline area to organize and prepare it for editing.

Step 2Apply VHS Effect to the Video

It’s time to add the VHS effects to your video. Look for the “Effects” option in the top bar and click on it. Next, search for “VHS” to find a variety of VHS overlays. Choose the one that suits your style and drag it onto the timeline, placing it over your video.

Step 3Apply VHS Sound Effects

For the VHS audio filter, go to the “Audio” tab, select “Sound Effect,” and search for “VHS.” Proceed further by selecting a suitable sound effect and dragging it onto the timeline beneath your video.

Step 4Export Your File

Once satisfied with the result, click the “Export” tab at the top left of the screen to save your video with the applied VHS effects.

Conclusion

In conclusion, a good video depends not only on your camera. There is so much post-production work behind good-quality content. You have to create a feel and ambiance in a video using effects and other overlays. You can create an old-themed video using the right filter and adding a VHS audio effect. Wondershare Filmora provides you with a platform where you can create such content with ease.

Apply VHS Sound Effect Apply VHS Sound Effect Learn More >

Try It Free >>

Part 2: Best VHS Sound Effects To Use in 2024

A video is incomplete without good-quality audio and sound effects. So, if you want to create a VHS-style video, make sure to use VHS audio filters as well. Here are some classic VHS sounds you can use for your content.

1. Video Cass. Recorder 06

This audio effect gives your video the nostalgic feel of an old video reel playing. Its VHS-inspired audio effects last for 30 seconds. You can use this effect to create a vintage atmosphere in your videos. This effect can also transport your viewers back to the era of classic video recordings.

2. Creepy Distortion

You can create a haunting and unsettling atmosphere with this sound effect. It adds a creepy VHS sound distortion effect to your content. This effect is perfect for horror or suspenseful scenes. Moreover, this audio filter has a duration of 30 seconds.

3. VCR Deck Insert VHS Ta PE416803

With this audio effect, you can simulate the experience of inserting a tape into a VCR. You can add this effect to your video to enhance the authenticity and realism of a scene. It will help you in a situation where a tape is being loaded into a VCR. The duration of this audio is 20 seconds.

4. VCR Deck Insert VHS Ta PE416801

In this effect, you can hear the sound of someone inserting a tape into a VCR and pressing the play button. You can use this effect when showing scenes of tapes being loaded and played on a VCR. This 10-second audio effect will add an extra layer of realism and nostalgia.

5. VHS Player

Experience the entire process of using a VHS tape with this audio effect. You’ll hear the opening of the VHS box, inserting it into the VCR, followed by the playback sound. Then, there’s the fast-forward effect; additionally, you can enjoy the sound of the fast reverse. Finally, you’ll hear the stop, ejection of the VHS, and the storage of it back into its original box. This effect lasts for 3 minutes and 5 seconds.

6. VCR: Forward

Get the feeling of fast-forwarding through a VHS tape with this sound effect. It lasts 1 minute and 4 seconds and adds the authentic sound of a fast-forwarding VHS tape. You can use this audio effect when you want to add a similar effect to your content.

7. VCR VHS Tape Rewind M PE1046902

You can use this effect in your VHS-styled videos. It produces the sound of a VHS tape rewinding, followed by the VHS pause sound effect. This effect adds a distinct audio cue for rewinding and pausing scenes involving a VHS. The duration of this VHS effect is 4 seconds.

8. VCR: Rewind

Take a trip back in time with the sound of a VHS tape being rewound. This audio file adds a VHS rewind sound effect to your video. The duration of this file is 1 minute and 9 seconds. It will provide the nostalgic sound of a quick rewinding of a VHS tape.

9. Video Cass. Recorder 07

Using this audio effect, you can create the sensation of a video reel playing in a video cassette recorder. This VHS audio filter lasts for 30 seconds. You can use this effect to emphasize the vintage vibe of your video further. It also adds an old-fashioned charm to your video content.

10. VHS Player Rewind

This sound effect, provided by Pixabay, lasts 1 minute and 13 seconds. It starts with a glitchy and nostalgic VHS rewind sound to your video. The audio file brings back memories of vintage technology by adding the VHS rewind effect. You can recreate the experience of the 90s using this audio filter.

Bonus Part: Creating The Best VHS-Themed Videos With Wondershare Filmora

Filmora Video Editor is the ultimate tool and an incredible software for video editing. From audio effects to professional video edits, this tool can do a lot of stuff. This tool is now powered with AI technology which means more features are added in its latest version. You can edit your video and add sound effects that sync with your content feel.

Add VHS Sound Effect For Win 7 or later(64-bit)

Add VHS Sound Effect For macOS 10.14 or later

Try It Free >>

To make such videos having VHS effects, first, you need to learn how to use Wondershare Filmora. If you follow the following steps, you can easily edit your videos.

Step 1Starting Your Project

Open Wondershare Filmora and click on “New Project” to begin. This will bring up a new window where you can get started on your video. Import your video file by selecting the “Import Media” option and choosing the file from your system. Then, drag and drop the video into the timeline area to organize and prepare it for editing.

Step 2Apply VHS Effect to the Video

It’s time to add the VHS effects to your video. Look for the “Effects” option in the top bar and click on it. Next, search for “VHS” to find a variety of VHS overlays. Choose the one that suits your style and drag it onto the timeline, placing it over your video.

Step 3Apply VHS Sound Effects

For the VHS audio filter, go to the “Audio” tab, select “Sound Effect,” and search for “VHS.” Proceed further by selecting a suitable sound effect and dragging it onto the timeline beneath your video.

Step 4Export Your File

Once satisfied with the result, click the “Export” tab at the top left of the screen to save your video with the applied VHS effects.

Conclusion

In conclusion, a good video depends not only on your camera. There is so much post-production work behind good-quality content. You have to create a feel and ambiance in a video using effects and other overlays. You can create an old-themed video using the right filter and adding a VHS audio effect. Wondershare Filmora provides you with a platform where you can create such content with ease.

Best CapCut Templates for Slow Motion Video Trend

In this digital realm, CapCut is a video editor, turning into another social media app. It was launched in 2020 but gained massive success by the end of 2022 with the introduction of templates. It’s an automated tool which is a sister app to TikTok. When a TikTok trend goes viral, people move to CapCut to copy that as it is. From social media influencers to users, everyone is using this video editor for good.

Recently, the CapCut template’s new trend of slow motion has been in trend. If you intend to post a video on the CapCut new trend in slow motion, this guide is for you. Without any wait, read this article to learn everything about CapCut’s new slow-motion template. Before delving into detail, you should analyze how these templates have eased our video creation.

Slow Motion Video Maker Slow your video’s speed with better control of your keyframes to create unique cinematic effects!

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1. CapCut Video Editor: How Is It Making Slow Motion Video Making Easy?

As a social media user, you must be aware of CapCut ; if not, keep reading. CapCut is a video editing platform with advanced options to help you capture key moments. With unique features , your content can go viral on TikTok, Facebook, and Instagram. After making videos, users can directly post on their social media, especially on TikTok.

This software is available to use online or download on Windows, macOS, and smartphones. Delve into its key features besides the CapCut slow motion template with neon effect:

• CapCut can trim, merge, and delete clips like every other video editor.
• You can add transitions between clips from different categories.
• From advanced features, you can add keyframe animations in video.
• Offer millions of music from the music library or extract from existing video clips.
• With its intelligent features, users can remove backgrounds and add auto-captions.
• Allows smooth editing of slow-motion and fast-speed videos with speed ramping.

Part 2. Listing Out Some Unique Templates Available on CapCut for Slow Motion Video

CapCut has a vast library of templates, as discussed earlier. They contain well-designed video layouts, transitions, effects, and texts to inspire others. For slow-motion templates, it offers extensive options that you can choose based on your preferences. If you haven’t found anything attractive, look into these CapCut new slow-motion templates.

• Camera Lenta: It’s a trending slow-motion video template on the internet. As shown, it is used by more than 23k people and requires just one clip to process. This footage shows a blurry start, which gradually turns into a clear shot with music beats.

• Slow Motion: This template is popular with over 87k usages. It requires a single clip to make a video in a 9:16 aspect ratio. In this clip, a woman lip-syncs a song that reveals properly after a blurry transition into slow motion.

• CapCut Slow Motion: With more than 546k utilizations, this template is commonly available everywhere. You need 2 clips to use this, and an 11-second video will be generated. The massive use of this template might be due to its music, effects, and transitions.

• Slow Motion Transisi: Social media influencers prefer this template to show their dance moves. It requires 4 clips to make an attractive slow-motion video. At the start of the clip, you can see a countdown timer and a music beat with dance steps.

• Slow Motion Alih: If you want to reveal your mountain travel video, this template is perfect. This 11-second template is used by over 87k people. It starts with a musical voice and progresses at normal speed. Gradually, it slows down and shifts speed abruptly with the rhythm of the music.

• Slow Motion Izacklstyle: It’s another famous template that is perfect for your travel clips. This CapCut new trend 2022 template slow motion has more than 100k uses. It asks for 4 footage to show the natural beauty of nature, mountains, waterfalls, and you.

• Slow Motion JP: With 1.3 million uses, this template is widely recognized on social media. Actually, the kid smiling in this slow-motion video makes it popular. It is an 8-second clip where the boy is standing chin-down. Suddenly, the music’s rhythm and effect change when he looks upward.

Part 3. How to Create a Simple Slow-Motion Video from a Template in CapCut?

Making a CapCut template new trend in slow motion is not very difficult. For this purpose, you have to pick one template and select the media. After choosing a template from the above section, follow the given steps for better results. Regardless of the mobile device you are using, this step-by-step guide will prove beneficial for each.

Step 1

Launch CapCut on your smartphone and sign in to your account. Access the home screen of CapCut and look for the “Template” option from the bottom. Tap on it and find the vast video template library of this platform.

Step 2

Go to the search and prompt with “Slow Motion Video” to browse results. Pick one video template of your choice and get a preview. From its preview, hit the “Use Template” button and go directly to import media. Select the video you wish and touch the “Preview” button.

Step 3

After previewing results, go to the top right side and tap the “Export” button. You will get an extended “Export Setting” menu at the bottom. It’s up to you whether to choose “Save to Device” or Save and Share to TikTok.”

Part 4. Desktop Solution: How to Make Better Slow-Motion Videos with Wondershare Filmora?

Using CapCut’s new slow-motion templates makes videos easy but restricts certain tasks. If you want to enjoy more flexibility in creating slow-motion videos, use Wondershare Filmora . It’s a video editing platform with innovative features to uplift creativity with personalization. This all-in-all platform offers AI-integrated features to generate unique content effortlessly.

Filmora can assist you in editing tasks by providing AI Copilot Editing . Besides, it can generate engaging scripts with prompts that align with your goals. Moreover, you can get copyright-free music and images to achieve appealing virtual content. Filmora can bring limitless creativity and uniqueness to your media, so move to explore it.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Create Personalized Slow-Motion Video with Filmora

Filmora offers Speed Ramping features to slow down video as you want. It also ensures smooth playback of slow-mo videos by providing an optical flow option. Let’s move to the real process with the given steps without further delay.

Step 1: Download Filmora and Import the Video to Slow Down

If you haven’t downloaded Filmora, visit its official site and get the latest version. Launch it on your device and access its main screen. Choose “New Project” and enter its editing screen. Press “Ctrl + I” to import your video into Filmora quickly. Drag and drop your imported media to the timeline section for further processing.

Step 2: Access Speed Ramping to Customize Video Speed

Locate your cursor on the video and right-click on it to choose “Speed Ramping” from the list. This way, you will get an editing panel on the right side. You have the flexibility to select a predesigned template for speed ramping. Otherwise, hit the “Customize” button and find the graph below. Use the graph and locate the dots upward and downward to get the desired slow-motion video.

Step 3: Apply Optical Flow and Export within Personalized Settings

Later, go downward to the “AI interpolation” and extend its menu. From the menu, select “Optical Flow” for a smooth playback speed. If you are satisfied with the result, look for the “Export” button at the top right. Get the “Export” screen and adjust the parameter to save the video in your assigned settings.

Conclusion

To conclude, social media influencers set trends using CapCut in real-time. They are getting the audience’s attention through the CapCut template’s new trend of slow motion. This article has also shed light on CapCut, its slow-motion templates, and how to use it. After reading, you must realize that using Wondershare Filmora is a far better option.

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1. CapCut Video Editor: How Is It Making Slow Motion Video Making Easy?

As a social media user, you must be aware of CapCut ; if not, keep reading. CapCut is a video editing platform with advanced options to help you capture key moments. With unique features , your content can go viral on TikTok, Facebook, and Instagram. After making videos, users can directly post on their social media, especially on TikTok.

This software is available to use online or download on Windows, macOS, and smartphones. Delve into its key features besides the CapCut slow motion template with neon effect:

• CapCut can trim, merge, and delete clips like every other video editor.
• You can add transitions between clips from different categories.
• From advanced features, you can add keyframe animations in video.
• Offer millions of music from the music library or extract from existing video clips.
• With its intelligent features, users can remove backgrounds and add auto-captions.
• Allows smooth editing of slow-motion and fast-speed videos with speed ramping.

Part 2. Listing Out Some Unique Templates Available on CapCut for Slow Motion Video

CapCut has a vast library of templates, as discussed earlier. They contain well-designed video layouts, transitions, effects, and texts to inspire others. For slow-motion templates, it offers extensive options that you can choose based on your preferences. If you haven’t found anything attractive, look into these CapCut new slow-motion templates.

• Camera Lenta: It’s a trending slow-motion video template on the internet. As shown, it is used by more than 23k people and requires just one clip to process. This footage shows a blurry start, which gradually turns into a clear shot with music beats.

• Slow Motion: This template is popular with over 87k usages. It requires a single clip to make a video in a 9:16 aspect ratio. In this clip, a woman lip-syncs a song that reveals properly after a blurry transition into slow motion.

• CapCut Slow Motion: With more than 546k utilizations, this template is commonly available everywhere. You need 2 clips to use this, and an 11-second video will be generated. The massive use of this template might be due to its music, effects, and transitions.

• Slow Motion Transisi: Social media influencers prefer this template to show their dance moves. It requires 4 clips to make an attractive slow-motion video. At the start of the clip, you can see a countdown timer and a music beat with dance steps.

• Slow Motion Alih: If you want to reveal your mountain travel video, this template is perfect. This 11-second template is used by over 87k people. It starts with a musical voice and progresses at normal speed. Gradually, it slows down and shifts speed abruptly with the rhythm of the music.

• Slow Motion Izacklstyle: It’s another famous template that is perfect for your travel clips. This CapCut new trend 2022 template slow motion has more than 100k uses. It asks for 4 footage to show the natural beauty of nature, mountains, waterfalls, and you.

• Slow Motion JP: With 1.3 million uses, this template is widely recognized on social media. Actually, the kid smiling in this slow-motion video makes it popular. It is an 8-second clip where the boy is standing chin-down. Suddenly, the music’s rhythm and effect change when he looks upward.

Part 3. How to Create a Simple Slow-Motion Video from a Template in CapCut?

Making a CapCut template new trend in slow motion is not very difficult. For this purpose, you have to pick one template and select the media. After choosing a template from the above section, follow the given steps for better results. Regardless of the mobile device you are using, this step-by-step guide will prove beneficial for each.

Step 1

Launch CapCut on your smartphone and sign in to your account. Access the home screen of CapCut and look for the “Template” option from the bottom. Tap on it and find the vast video template library of this platform.

Step 2

Go to the search and prompt with “Slow Motion Video” to browse results. Pick one video template of your choice and get a preview. From its preview, hit the “Use Template” button and go directly to import media. Select the video you wish and touch the “Preview” button.

Step 3

After previewing results, go to the top right side and tap the “Export” button. You will get an extended “Export Setting” menu at the bottom. It’s up to you whether to choose “Save to Device” or Save and Share to TikTok.”

Part 4. Desktop Solution: How to Make Better Slow-Motion Videos with Wondershare Filmora?

Using CapCut’s new slow-motion templates makes videos easy but restricts certain tasks. If you want to enjoy more flexibility in creating slow-motion videos, use Wondershare Filmora . It’s a video editing platform with innovative features to uplift creativity with personalization. This all-in-all platform offers AI-integrated features to generate unique content effortlessly.

Filmora can assist you in editing tasks by providing AI Copilot Editing . Besides, it can generate engaging scripts with prompts that align with your goals. Moreover, you can get copyright-free music and images to achieve appealing virtual content. Filmora can bring limitless creativity and uniqueness to your media, so move to explore it.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Create Personalized Slow-Motion Video with Filmora

Filmora offers Speed Ramping features to slow down video as you want. It also ensures smooth playback of slow-mo videos by providing an optical flow option. Let’s move to the real process with the given steps without further delay.

Step 1: Download Filmora and Import the Video to Slow Down

If you haven’t downloaded Filmora, visit its official site and get the latest version. Launch it on your device and access its main screen. Choose “New Project” and enter its editing screen. Press “Ctrl + I” to import your video into Filmora quickly. Drag and drop your imported media to the timeline section for further processing.

Step 2: Access Speed Ramping to Customize Video Speed

Locate your cursor on the video and right-click on it to choose “Speed Ramping” from the list. This way, you will get an editing panel on the right side. You have the flexibility to select a predesigned template for speed ramping. Otherwise, hit the “Customize” button and find the graph below. Use the graph and locate the dots upward and downward to get the desired slow-motion video.

Step 3: Apply Optical Flow and Export within Personalized Settings

Later, go downward to the “AI interpolation” and extend its menu. From the menu, select “Optical Flow” for a smooth playback speed. If you are satisfied with the result, look for the “Export” button at the top right. Get the “Export” screen and adjust the parameter to save the video in your assigned settings.

Conclusion

To conclude, social media influencers set trends using CapCut in real-time. They are getting the audience’s attention through the CapCut template’s new trend of slow motion. This article has also shed light on CapCut, its slow-motion templates, and how to use it. After reading, you must realize that using Wondershare Filmora is a far better option.

Also read: