How to Add Green Screen Effects In Phhotoshop

Removing green screen backgrounds and replacing them with stunning videos is a common practice in video and movie making. The same process is applicable to still photos as well. You can take a photo with a green screen background and replace the screen with any photo as per your preference and requirement. You will need a high-quality photo editor to add green screen effects to your photo. There is no better photo editor in the world than Adobe Photoshop.

First, you have to opt for remove green screen Photoshop and then add anything you want in place of the green screen. The difference between Chroma key Photoshop and any other photo editor is that you can pay attention to details and remove the entire green screen halo effect around the main subject or object on the photo. Therefore, there will be no jittery green edges and green patches to disturb the overall photo quality. Here are the steps to use green screen effect in Adobe Photoshop.

1. How To Use Green Screen in Photoshop?

There are various ways available to remove greenscreen Photoshop. The beginners prefer using the Magic Wand tool but there will always be green patches around the main object on the photo. These green patches will get highlighted when you insert any image in the background. Therefore, we are using the best method to Chroma key Photoshop and that is through Color Range option. Here are the detailed steps to use color keying in Photoshop to use green screen effect.

Step 1: Launch Adobe Photoshop and open your photo with green screen background.

Step 2: Go to Select menu and click on Color Range.

Step 3: Pick the Eyedropper tool. Hold Shift key to select the green background. You can also hold Alt key to remove any selection that you might have done by mistake. When you are perfectly ok with the selection of the green screen background, you should click on OK button.

Step 3: Go to Select menu and click on Inverse. Now, the selection will be on the main subject instead of the background.

Step 4: If you want to see a preview of the selection in your photo, you should select Image radio button and from Selection Preview, select any option other than None.

Step 5: Go to Select menu again and click on Refine Edge. Use the sliders to fine-tune the selection so that the selection is smooth on the edges of the main subject of the photo. Once done, click on OK button.

Step 6: Go to Select menu and click on Inverse again.

Step 7: Press Delete key to delete the green screen background selection.

Step 8: Open the replacement image which you want to put in the place of the green screen background that you have just deleted.

Step 9: Select the entire replacement image and copy the replacement. Come back to your photo and paste the replacement image. Make sure that the layer of the replacement image must be placed below the layer of your photo.

Step 10: You can adjust the size of the images as per your requirement so that everything fits perfectly in the frame. Similarly, you should adjust the color scheme so that the superimposition does not look awkward.

2. Best Way To Add Green Screen Effect To Video

In the previous section, we have stated how to remove the green screen background in any image and replace that with a stunning background photo. In this section, we will state how to add green screen effects in a video. There are many who think that adding green screen effects in a video takes a lot of expertise, but it is not the case.

If you select the suitable video editor, it is a matter of a few steps only. We recommend Wondershare Filmora to add green screen effects to your video where you have shot the scenes with green screen backgrounds. Here are the steps to follow to remove green screen backgrounds and replace with any photo or video as per your preference.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Launch Filmora and go for Create New Project option to get started.

Step 3: Import your video with green screen background and move it to the Timeline.

Step 4: Import the replacement photo or video and put it directly on the Timeline.

On the Timeline, your recorded video should be below the replacement photo or video.

Step 5: Double-click on your video, and you will come across a panel on the upper-left side. From that panel, you have to turn on Chroma Key option. This will enable the green screen effect due to which you will see the replacement photo or video superimposed on your recorded video in the green screen background.

Step 6: Finally, adjust the parameters available to fine-tune the overall green screen effect. Lastly, click on Ok button.

Conclusion

If you are looking to add green screen effects to your photo, you can opt for Chroma key Photoshop. Adobe Photoshop is the best photo editor to remove the green screen backgrounds on your photo and replace them with any image you want. Color keying in Photoshop enables you to change any solid color background to anything you want. Similarly, you can use Wondershare Filmora to add green screen effects to your video in simple steps.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Launch Filmora and go for Create New Project option to get started.

Step 3: Import your video with green screen background and move it to the Timeline.

Step 4: Import the replacement photo or video and put it directly on the Timeline.

On the Timeline, your recorded video should be below the replacement photo or video.

Step 5: Double-click on your video, and you will come across a panel on the upper-left side. From that panel, you have to turn on Chroma Key option. This will enable the green screen effect due to which you will see the replacement photo or video superimposed on your recorded video in the green screen background.

Step 6: Finally, adjust the parameters available to fine-tune the overall green screen effect. Lastly, click on Ok button.

Conclusion

If you are looking to add green screen effects to your photo, you can opt for Chroma key Photoshop. Adobe Photoshop is the best photo editor to remove the green screen backgrounds on your photo and replace them with any image you want. Color keying in Photoshop enables you to change any solid color background to anything you want. Similarly, you can use Wondershare Filmora to add green screen effects to your video in simple steps.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Launch Filmora and go for Create New Project option to get started.

Step 3: Import your video with green screen background and move it to the Timeline.

Step 4: Import the replacement photo or video and put it directly on the Timeline.

On the Timeline, your recorded video should be below the replacement photo or video.

Step 5: Double-click on your video, and you will come across a panel on the upper-left side. From that panel, you have to turn on Chroma Key option. This will enable the green screen effect due to which you will see the replacement photo or video superimposed on your recorded video in the green screen background.

Step 6: Finally, adjust the parameters available to fine-tune the overall green screen effect. Lastly, click on Ok button.

Conclusion

If you are looking to add green screen effects to your photo, you can opt for Chroma key Photoshop. Adobe Photoshop is the best photo editor to remove the green screen backgrounds on your photo and replace them with any image you want. Color keying in Photoshop enables you to change any solid color background to anything you want. Similarly, you can use Wondershare Filmora to add green screen effects to your video in simple steps.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Launch Filmora and go for Create New Project option to get started.

Step 3: Import your video with green screen background and move it to the Timeline.

Step 4: Import the replacement photo or video and put it directly on the Timeline.

On the Timeline, your recorded video should be below the replacement photo or video.

Step 5: Double-click on your video, and you will come across a panel on the upper-left side. From that panel, you have to turn on Chroma Key option. This will enable the green screen effect due to which you will see the replacement photo or video superimposed on your recorded video in the green screen background.

Step 6: Finally, adjust the parameters available to fine-tune the overall green screen effect. Lastly, click on Ok button.

Conclusion

If you are looking to add green screen effects to your photo, you can opt for Chroma key Photoshop. Adobe Photoshop is the best photo editor to remove the green screen backgrounds on your photo and replace them with any image you want. Color keying in Photoshop enables you to change any solid color background to anything you want. Similarly, you can use Wondershare Filmora to add green screen effects to your video in simple steps.

How to Use Lumetri Color in Adobe After Effects

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Easy Steps to Create Intro Video with After Effects

It’s difficult to make an intro in After Effects. To start, you must have a natural beginning that will catch the

viewer’s attention in the film you’ve made right away. Then, you can improve the caliber of your intros by using built-in filters, transition effects, overlays, animation, and more! Therefore, we’re confident that this article will be helpful to you if you’ve been trying to learn how to create After Effects intros of the highest level. Continue reading to learn more.

Let’s start off!

1. Create a new composition for your intro

You must build up your video’s composition based on the output. You can upload the previously recorded video after choosing the composition and the runtime. Right-click again and select “Pre-compose” from the menu that appears. To make it simpler to find later, you can also rename your movie here.

The composition can then include a solid layer. Follow *Layer > New > Solid* to get to this option. Additionally,

you can choose a hue based on the type of video you want to make. Additionally, you may use the Text option to build text layers, which will allow you to split the words at different points in the document. You can edit each word separately when you break it into layers. Finally, you can move the text around and change the color of the reader to make it more appropriate for your films.

After Effects makes it incredibly simple to edit the text composition and import it into the timeline of the film.

A panel appears on the right after importing a text composition. Here, you can alter the text’s color, position,

and size.

2. Add the first transition layer

By include the transition layer, you may use After Effects’ effects templates to apply a variety of effects to your

videos. You can experiment with a variety of transition layers in After Effects before selecting the ideal one (CC Light Wipe is a popular choice).

You can modify the transition after applying it to the layer. For instance, you may decide to apply the second

key transition at a later period in the timeline and configure the first key transition to occur immediately at the start of the timeline. Setting the completion value is crucial since it will influence how long the word will remain displayed in the video.

3. Add the second transition layer

The transition effect you introduced in the first stage can either be maintained here, or you can select an

entirely different one. According to how long you want the text to be displayed, add the layer and adjust

completion. The reader is invisible when the completion value is set to 100%, or the word is said when it is set

to 0%.

A memory sketch

If you want to make a black-and-white video that is more interesting, the memory sketch is a great template to use. You can make a visually beautiful video with its outstanding text captions, fluid transitions, and excellent animations.

Toolkit for Instagram

These days, Instagram is a very popular social media site. Instagram is a platform where reels and videos

flourish, therefore you must make every effort to differentiate your video from the millions of others available.

The Instagram Toolkit template meets the standards of the social media network by being brief, clear, and

appealing.

Lighting sweep

A final transition effect, which can be found in the *Effects > Generate *section, must be added to the video in order to complete the effect. The final flourish can be added in the same way as the other keyframes. In this step, you can use the edge intensity, sweep intensity, and direction. This allows you to seamlessly combine the transition of words with lighting effects.

These are some quick and easy techniques to adding some intros to your videos that look professional. Let’s

also take a look at some well-known templates you may utilize to make perfect video intros. Because the initial few seconds of any video are so important, After Effects has put together some incredible templates that have a variety of video clips, images, text, sound effects, and music tracks. To produce the video you want, you must obtain the ideal template.

The Bottom Line

Utilizing templates will hasten your workflow even though it takes some time to become familiar with After

Effects’ various tools. To gain a feel for how After Effects functions, we advise playing around by adding some

clips and titles. When you do that, you will be well on your way to creating a fantastic intro for your upcoming

video project.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

9 Best Sparkle Effects Photo and Video Editors You Should Know

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Has your project been looking sparkly lately?

With New Year’s Eve and other holiday celebrations just behind us, you may have noticed some excessive glitter everywhere. You might have found yourself wondering if everyone had spent the holidays mastering some clever techniques of photography with fancy new equipment they got for holiday celebrations. Well, they might have, but the chances are they have just improved their projects with some admirable effects, and we are about to show you how you can do the same.

There are loads of free (or very cheap) apps or video editors you can use to easily beautify the creativity and mood of your images - using just the smartphone camera in your pocket! Sparkling decorations, twinkling lights, and dramatic lens flares can all compile into your photo during or after you shoot your project.

So, let’s move on to considering the best and effective ways of using sparkle video effects as follows.

In this article

01 What are the Advantages of Sparkle Effects?

02 Top 8 Sparkle Effects Apps/Editors in 2021

03 FAQs about Sparkle Effects

Part 1: What are the Advantages of Sparkle Effects?

By now, you’re all familiar with the basics of sparkle video effects editing: You push a button and push your button. But if you plan to preserve those prosperous memories, then you’ll want your snaps to look their best.

Glitter filters or sparkle video effects are beauty-enhancing effects that any photo or video editing users enjoy applying to their projects. Even Twitter and Instagram are pretty considerable that incredible amounts of sparkle or glitter effects are available within.

There are tons of filters and similar effects to choose from among them, and they all add specks of silver glitter that glisten as you shoot your video. At the same time, they also often smooth the skin of the subject. So, you must also note them as their advantages.

However, others aren’t too keen on the glitters filters, claiming they transform appearance too much and are usually pretty annoying and fake.

Depending on the purpose of your image, you may want to add filters, text, and frames. For instance, you can include your signature to avoid copying your image without receiving credit if shared online.

Part 2: Top 8 Sparkle Effects Apps/Editors in 2021

Find the right photo enhancement tools to edit your pictures.

3 Best Sparkle Effect Apps

1. kirakira+

With this app, you can apply a cross filter to combine with the camera lens. The reflective objects and light-emitting materials will shine even more. It has sparkle video effects of jewelry, glass, illumination, etc. Its primary function is that you can shoot the photo and video with an impressive Glitter effect.

Price: $0.99 || Devices: Android, iPhone, iPad ||

2. Sparkle Effects - Glitter FX

Let’s have fun adding beautiful glitter and sparkle video effects to your photos and videos. Here, you can upload pictures and videos directly from your gallery. Just hover the camera at anything shiny and let the app take over. These effects can be helpful on jewelry, cars, landscape, motorcycles, or anything else you’d like!

Price: Free || Devices: Android, iPhone, iPad ||

3. PicsArt iOS | Android

Use the Lens Flare tool to apply a dynamic effect directly to your videos and images. Alternatively, you Search for lens flare or sunray stickers and similar sparkle video effects and then apply them to your photo using the different blend modes. You can adjust using a layer mask or customize the opacity to suit.

2 Excellent Sparkle Video Effects Editor

1. Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Video effects, also known as visual effects or filters, create crazy graphics with clicks. It’s simple, and the results are great when you use dedicated software such as Wondershare Filmora. This is why people love sparkle video effects.

This platform is quite different from other video editing software in the market with minimal video effects. Wondershare Filmora offers 300+ free effects: Picture in Pageant, Transitional effects, Intro/Credits, Sound, Jump Cut, Titles, Mosaic, and more.

Or, you can download the Sparkle effects pack from Filmstock .

2. After Effects

It’s an excellent background for Christmas plays, holiday pageants, or any other video you wish to add a little twinkle! You can add a twinkling star quite easily in Adobe After Effects.

Are you looking for the perfect sparkle video effect for your next After Effects project? Here are some great picks!

After Effects has Particle Presets Kit, Glitter Particles Logo, Elegant Particle Logo, Glitter Fantasy, Particle Glitter, Magic Graphics, Golden, and more in Sparkle effects filters.

Top 3 Online Sparkle Effects Editor

1. Videezy

Footage from Videezy is royalty-free for personal and commercial use, but users need to credit ‘Videezy.com’ in their projects.

The freest stock videos are in HD resolution, but there’s also a good collection of 4K clips – mostly abstract clips and landscape scenes rendered using Adobe After Effects.

The quality is mixed but generally high. All videos are in MP4 format, and you can see the resolution below the preview on the download page.

2. Pngtree

Pngtree is a PNG stock images market, but also you can look for a lot of unique backgrounds and templates. Their staff or customer care are also lovely and reply in time. Furthermore, its graphics are good enough, and you can find almost anything you are looking for.

3. Glitterboo

It is a much more complete tool that also allows video editing. Before you edit your images, we advise you to test this site yourself to get satisfactory results. Essentially, the procedure to apply the glitter effect is very similar to those described above, so in this case, it is not strictly necessary to show you all the steps, as it is all quite intuitive.

Part 3: FAQs about Sparkle Effects

1 – What is the sparkle effect on Instagram?

Glitter filters are a type of beauty-enhancing filter that Instagram users enjoy applying to their selfies and videos. There is plenty of different ones to choose from on Instagram, and they all add specks of silver glitter that glisten as you film your video.

2 – What is the sparkle effect on TikTok?

To get the sparkly ‘bling’ effect, you further need to consider a few straightforward steps. All you are required to do beforehand is to check that your TikTok app is up to date!

3 – How can I improve my photos?

You can use filters and effects to improve photos to a great extent. For this purpose, you can go with using the sparkle effects as aforementioned.

Conclusion

The perfect sparkle video effect can add majesty, magic, and wonder to your next project. Furthermore, you can add a slight shimmer and shine and take the viewing experience to a whole new stage with one of these tremendous effects.

More thanks we should add to the video editing software present in the market, every kins of user can easily apply effects to our videos. Don’t like the complicated software like Final Cut Pro or Adobe Premiere or any other tools listed above? Wondershare Filmora video editor now makes it easy to apply all the special effects, including sparkle video effects mentioned above. This simple video editing tool provides the most comprehensive and practical editing elements and workflow around.

And, if you’re not satisfied with Filmora’s inbuilt effects, Filmstock is a one-stop shop for royalty-free video effects, music and sound effects, stock video footage, and more stock media.

Try It Free Try It Free

Has your project been looking sparkly lately?

With New Year’s Eve and other holiday celebrations just behind us, you may have noticed some excessive glitter everywhere. You might have found yourself wondering if everyone had spent the holidays mastering some clever techniques of photography with fancy new equipment they got for holiday celebrations. Well, they might have, but the chances are they have just improved their projects with some admirable effects, and we are about to show you how you can do the same.

There are loads of free (or very cheap) apps or video editors you can use to easily beautify the creativity and mood of your images - using just the smartphone camera in your pocket! Sparkling decorations, twinkling lights, and dramatic lens flares can all compile into your photo during or after you shoot your project.

So, let’s move on to considering the best and effective ways of using sparkle video effects as follows.

In this article

01 What are the Advantages of Sparkle Effects?

02 Top 8 Sparkle Effects Apps/Editors in 2021

03 FAQs about Sparkle Effects

Part 1: What are the Advantages of Sparkle Effects?

By now, you’re all familiar with the basics of sparkle video effects editing: You push a button and push your button. But if you plan to preserve those prosperous memories, then you’ll want your snaps to look their best.

Glitter filters or sparkle video effects are beauty-enhancing effects that any photo or video editing users enjoy applying to their projects. Even Twitter and Instagram are pretty considerable that incredible amounts of sparkle or glitter effects are available within.

There are tons of filters and similar effects to choose from among them, and they all add specks of silver glitter that glisten as you shoot your video. At the same time, they also often smooth the skin of the subject. So, you must also note them as their advantages.

However, others aren’t too keen on the glitters filters, claiming they transform appearance too much and are usually pretty annoying and fake.

Depending on the purpose of your image, you may want to add filters, text, and frames. For instance, you can include your signature to avoid copying your image without receiving credit if shared online.

Part 2: Top 8 Sparkle Effects Apps/Editors in 2021

Find the right photo enhancement tools to edit your pictures.

3 Best Sparkle Effect Apps

1. kirakira+

With this app, you can apply a cross filter to combine with the camera lens. The reflective objects and light-emitting materials will shine even more. It has sparkle video effects of jewelry, glass, illumination, etc. Its primary function is that you can shoot the photo and video with an impressive Glitter effect.

Price: $0.99 || Devices: Android, iPhone, iPad ||

2. Sparkle Effects - Glitter FX

Let’s have fun adding beautiful glitter and sparkle video effects to your photos and videos. Here, you can upload pictures and videos directly from your gallery. Just hover the camera at anything shiny and let the app take over. These effects can be helpful on jewelry, cars, landscape, motorcycles, or anything else you’d like!

Price: Free || Devices: Android, iPhone, iPad ||

3. PicsArt iOS | Android

Use the Lens Flare tool to apply a dynamic effect directly to your videos and images. Alternatively, you Search for lens flare or sunray stickers and similar sparkle video effects and then apply them to your photo using the different blend modes. You can adjust using a layer mask or customize the opacity to suit.

2 Excellent Sparkle Video Effects Editor

1. Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Video effects, also known as visual effects or filters, create crazy graphics with clicks. It’s simple, and the results are great when you use dedicated software such as Wondershare Filmora. This is why people love sparkle video effects.

This platform is quite different from other video editing software in the market with minimal video effects. Wondershare Filmora offers 300+ free effects: Picture in Pageant, Transitional effects, Intro/Credits, Sound, Jump Cut, Titles, Mosaic, and more.

Or, you can download the Sparkle effects pack from Filmstock .

2. After Effects

It’s an excellent background for Christmas plays, holiday pageants, or any other video you wish to add a little twinkle! You can add a twinkling star quite easily in Adobe After Effects.

Are you looking for the perfect sparkle video effect for your next After Effects project? Here are some great picks!

After Effects has Particle Presets Kit, Glitter Particles Logo, Elegant Particle Logo, Glitter Fantasy, Particle Glitter, Magic Graphics, Golden, and more in Sparkle effects filters.

Top 3 Online Sparkle Effects Editor

1. Videezy

Footage from Videezy is royalty-free for personal and commercial use, but users need to credit ‘Videezy.com’ in their projects.

The freest stock videos are in HD resolution, but there’s also a good collection of 4K clips – mostly abstract clips and landscape scenes rendered using Adobe After Effects.

The quality is mixed but generally high. All videos are in MP4 format, and you can see the resolution below the preview on the download page.

2. Pngtree

Pngtree is a PNG stock images market, but also you can look for a lot of unique backgrounds and templates. Their staff or customer care are also lovely and reply in time. Furthermore, its graphics are good enough, and you can find almost anything you are looking for.

3. Glitterboo

It is a much more complete tool that also allows video editing. Before you edit your images, we advise you to test this site yourself to get satisfactory results. Essentially, the procedure to apply the glitter effect is very similar to those described above, so in this case, it is not strictly necessary to show you all the steps, as it is all quite intuitive.

Part 3: FAQs about Sparkle Effects

1 – What is the sparkle effect on Instagram?

Glitter filters are a type of beauty-enhancing filter that Instagram users enjoy applying to their selfies and videos. There is plenty of different ones to choose from on Instagram, and they all add specks of silver glitter that glisten as you film your video.

2 – What is the sparkle effect on TikTok?

To get the sparkly ‘bling’ effect, you further need to consider a few straightforward steps. All you are required to do beforehand is to check that your TikTok app is up to date!

3 – How can I improve my photos?

You can use filters and effects to improve photos to a great extent. For this purpose, you can go with using the sparkle effects as aforementioned.

Conclusion

The perfect sparkle video effect can add majesty, magic, and wonder to your next project. Furthermore, you can add a slight shimmer and shine and take the viewing experience to a whole new stage with one of these tremendous effects.

More thanks we should add to the video editing software present in the market, every kins of user can easily apply effects to our videos. Don’t like the complicated software like Final Cut Pro or Adobe Premiere or any other tools listed above? Wondershare Filmora video editor now makes it easy to apply all the special effects, including sparkle video effects mentioned above. This simple video editing tool provides the most comprehensive and practical editing elements and workflow around.

And, if you’re not satisfied with Filmora’s inbuilt effects, Filmstock is a one-stop shop for royalty-free video effects, music and sound effects, stock video footage, and more stock media.

Try It Free Try It Free

Has your project been looking sparkly lately?

With New Year’s Eve and other holiday celebrations just behind us, you may have noticed some excessive glitter everywhere. You might have found yourself wondering if everyone had spent the holidays mastering some clever techniques of photography with fancy new equipment they got for holiday celebrations. Well, they might have, but the chances are they have just improved their projects with some admirable effects, and we are about to show you how you can do the same.

There are loads of free (or very cheap) apps or video editors you can use to easily beautify the creativity and mood of your images - using just the smartphone camera in your pocket! Sparkling decorations, twinkling lights, and dramatic lens flares can all compile into your photo during or after you shoot your project.

So, let’s move on to considering the best and effective ways of using sparkle video effects as follows.

In this article

01 What are the Advantages of Sparkle Effects?

02 Top 8 Sparkle Effects Apps/Editors in 2021

03 FAQs about Sparkle Effects

Part 1: What are the Advantages of Sparkle Effects?

By now, you’re all familiar with the basics of sparkle video effects editing: You push a button and push your button. But if you plan to preserve those prosperous memories, then you’ll want your snaps to look their best.

Glitter filters or sparkle video effects are beauty-enhancing effects that any photo or video editing users enjoy applying to their projects. Even Twitter and Instagram are pretty considerable that incredible amounts of sparkle or glitter effects are available within.

There are tons of filters and similar effects to choose from among them, and they all add specks of silver glitter that glisten as you shoot your video. At the same time, they also often smooth the skin of the subject. So, you must also note them as their advantages.

However, others aren’t too keen on the glitters filters, claiming they transform appearance too much and are usually pretty annoying and fake.

Depending on the purpose of your image, you may want to add filters, text, and frames. For instance, you can include your signature to avoid copying your image without receiving credit if shared online.

Part 2: Top 8 Sparkle Effects Apps/Editors in 2021

Find the right photo enhancement tools to edit your pictures.

3 Best Sparkle Effect Apps

1. kirakira+

With this app, you can apply a cross filter to combine with the camera lens. The reflective objects and light-emitting materials will shine even more. It has sparkle video effects of jewelry, glass, illumination, etc. Its primary function is that you can shoot the photo and video with an impressive Glitter effect.

Price: $0.99 || Devices: Android, iPhone, iPad ||

2. Sparkle Effects - Glitter FX

Let’s have fun adding beautiful glitter and sparkle video effects to your photos and videos. Here, you can upload pictures and videos directly from your gallery. Just hover the camera at anything shiny and let the app take over. These effects can be helpful on jewelry, cars, landscape, motorcycles, or anything else you’d like!

Price: Free || Devices: Android, iPhone, iPad ||

3. PicsArt iOS | Android

Use the Lens Flare tool to apply a dynamic effect directly to your videos and images. Alternatively, you Search for lens flare or sunray stickers and similar sparkle video effects and then apply them to your photo using the different blend modes. You can adjust using a layer mask or customize the opacity to suit.

2 Excellent Sparkle Video Effects Editor

1. Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Video effects, also known as visual effects or filters, create crazy graphics with clicks. It’s simple, and the results are great when you use dedicated software such as Wondershare Filmora. This is why people love sparkle video effects.

This platform is quite different from other video editing software in the market with minimal video effects. Wondershare Filmora offers 300+ free effects: Picture in Pageant, Transitional effects, Intro/Credits, Sound, Jump Cut, Titles, Mosaic, and more.

Or, you can download the Sparkle effects pack from Filmstock .

2. After Effects

It’s an excellent background for Christmas plays, holiday pageants, or any other video you wish to add a little twinkle! You can add a twinkling star quite easily in Adobe After Effects.

Are you looking for the perfect sparkle video effect for your next After Effects project? Here are some great picks!

After Effects has Particle Presets Kit, Glitter Particles Logo, Elegant Particle Logo, Glitter Fantasy, Particle Glitter, Magic Graphics, Golden, and more in Sparkle effects filters.

Top 3 Online Sparkle Effects Editor

1. Videezy

Footage from Videezy is royalty-free for personal and commercial use, but users need to credit ‘Videezy.com’ in their projects.

The freest stock videos are in HD resolution, but there’s also a good collection of 4K clips – mostly abstract clips and landscape scenes rendered using Adobe After Effects.

The quality is mixed but generally high. All videos are in MP4 format, and you can see the resolution below the preview on the download page.

2. Pngtree

Pngtree is a PNG stock images market, but also you can look for a lot of unique backgrounds and templates. Their staff or customer care are also lovely and reply in time. Furthermore, its graphics are good enough, and you can find almost anything you are looking for.

3. Glitterboo

It is a much more complete tool that also allows video editing. Before you edit your images, we advise you to test this site yourself to get satisfactory results. Essentially, the procedure to apply the glitter effect is very similar to those described above, so in this case, it is not strictly necessary to show you all the steps, as it is all quite intuitive.

Part 3: FAQs about Sparkle Effects

1 – What is the sparkle effect on Instagram?

Glitter filters are a type of beauty-enhancing filter that Instagram users enjoy applying to their selfies and videos. There is plenty of different ones to choose from on Instagram, and they all add specks of silver glitter that glisten as you film your video.

2 – What is the sparkle effect on TikTok?

To get the sparkly ‘bling’ effect, you further need to consider a few straightforward steps. All you are required to do beforehand is to check that your TikTok app is up to date!

3 – How can I improve my photos?

You can use filters and effects to improve photos to a great extent. For this purpose, you can go with using the sparkle effects as aforementioned.

Conclusion

The perfect sparkle video effect can add majesty, magic, and wonder to your next project. Furthermore, you can add a slight shimmer and shine and take the viewing experience to a whole new stage with one of these tremendous effects.

More thanks we should add to the video editing software present in the market, every kins of user can easily apply effects to our videos. Don’t like the complicated software like Final Cut Pro or Adobe Premiere or any other tools listed above? Wondershare Filmora video editor now makes it easy to apply all the special effects, including sparkle video effects mentioned above. This simple video editing tool provides the most comprehensive and practical editing elements and workflow around.

And, if you’re not satisfied with Filmora’s inbuilt effects, Filmstock is a one-stop shop for royalty-free video effects, music and sound effects, stock video footage, and more stock media.

Try It Free Try It Free

Has your project been looking sparkly lately?

With New Year’s Eve and other holiday celebrations just behind us, you may have noticed some excessive glitter everywhere. You might have found yourself wondering if everyone had spent the holidays mastering some clever techniques of photography with fancy new equipment they got for holiday celebrations. Well, they might have, but the chances are they have just improved their projects with some admirable effects, and we are about to show you how you can do the same.

There are loads of free (or very cheap) apps or video editors you can use to easily beautify the creativity and mood of your images - using just the smartphone camera in your pocket! Sparkling decorations, twinkling lights, and dramatic lens flares can all compile into your photo during or after you shoot your project.

So, let’s move on to considering the best and effective ways of using sparkle video effects as follows.

In this article

01 What are the Advantages of Sparkle Effects?

02 Top 8 Sparkle Effects Apps/Editors in 2021

03 FAQs about Sparkle Effects

Part 1: What are the Advantages of Sparkle Effects?

By now, you’re all familiar with the basics of sparkle video effects editing: You push a button and push your button. But if you plan to preserve those prosperous memories, then you’ll want your snaps to look their best.

Glitter filters or sparkle video effects are beauty-enhancing effects that any photo or video editing users enjoy applying to their projects. Even Twitter and Instagram are pretty considerable that incredible amounts of sparkle or glitter effects are available within.

There are tons of filters and similar effects to choose from among them, and they all add specks of silver glitter that glisten as you shoot your video. At the same time, they also often smooth the skin of the subject. So, you must also note them as their advantages.

However, others aren’t too keen on the glitters filters, claiming they transform appearance too much and are usually pretty annoying and fake.

Depending on the purpose of your image, you may want to add filters, text, and frames. For instance, you can include your signature to avoid copying your image without receiving credit if shared online.

Part 2: Top 8 Sparkle Effects Apps/Editors in 2021

Find the right photo enhancement tools to edit your pictures.

3 Best Sparkle Effect Apps

1. kirakira+

With this app, you can apply a cross filter to combine with the camera lens. The reflective objects and light-emitting materials will shine even more. It has sparkle video effects of jewelry, glass, illumination, etc. Its primary function is that you can shoot the photo and video with an impressive Glitter effect.

Price: $0.99 || Devices: Android, iPhone, iPad ||

2. Sparkle Effects - Glitter FX

Let’s have fun adding beautiful glitter and sparkle video effects to your photos and videos. Here, you can upload pictures and videos directly from your gallery. Just hover the camera at anything shiny and let the app take over. These effects can be helpful on jewelry, cars, landscape, motorcycles, or anything else you’d like!

Price: Free || Devices: Android, iPhone, iPad ||

3. PicsArt iOS | Android

Use the Lens Flare tool to apply a dynamic effect directly to your videos and images. Alternatively, you Search for lens flare or sunray stickers and similar sparkle video effects and then apply them to your photo using the different blend modes. You can adjust using a layer mask or customize the opacity to suit.

2 Excellent Sparkle Video Effects Editor

1. Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Video effects, also known as visual effects or filters, create crazy graphics with clicks. It’s simple, and the results are great when you use dedicated software such as Wondershare Filmora. This is why people love sparkle video effects.

This platform is quite different from other video editing software in the market with minimal video effects. Wondershare Filmora offers 300+ free effects: Picture in Pageant, Transitional effects, Intro/Credits, Sound, Jump Cut, Titles, Mosaic, and more.

Or, you can download the Sparkle effects pack from Filmstock .

2. After Effects

It’s an excellent background for Christmas plays, holiday pageants, or any other video you wish to add a little twinkle! You can add a twinkling star quite easily in Adobe After Effects.

Are you looking for the perfect sparkle video effect for your next After Effects project? Here are some great picks!

After Effects has Particle Presets Kit, Glitter Particles Logo, Elegant Particle Logo, Glitter Fantasy, Particle Glitter, Magic Graphics, Golden, and more in Sparkle effects filters.

Top 3 Online Sparkle Effects Editor

1. Videezy

Footage from Videezy is royalty-free for personal and commercial use, but users need to credit ‘Videezy.com’ in their projects.

The freest stock videos are in HD resolution, but there’s also a good collection of 4K clips – mostly abstract clips and landscape scenes rendered using Adobe After Effects.

The quality is mixed but generally high. All videos are in MP4 format, and you can see the resolution below the preview on the download page.

2. Pngtree

Pngtree is a PNG stock images market, but also you can look for a lot of unique backgrounds and templates. Their staff or customer care are also lovely and reply in time. Furthermore, its graphics are good enough, and you can find almost anything you are looking for.

3. Glitterboo

It is a much more complete tool that also allows video editing. Before you edit your images, we advise you to test this site yourself to get satisfactory results. Essentially, the procedure to apply the glitter effect is very similar to those described above, so in this case, it is not strictly necessary to show you all the steps, as it is all quite intuitive.

Part 3: FAQs about Sparkle Effects

1 – What is the sparkle effect on Instagram?

Glitter filters are a type of beauty-enhancing filter that Instagram users enjoy applying to their selfies and videos. There is plenty of different ones to choose from on Instagram, and they all add specks of silver glitter that glisten as you film your video.

2 – What is the sparkle effect on TikTok?

To get the sparkly ‘bling’ effect, you further need to consider a few straightforward steps. All you are required to do beforehand is to check that your TikTok app is up to date!

3 – How can I improve my photos?

You can use filters and effects to improve photos to a great extent. For this purpose, you can go with using the sparkle effects as aforementioned.

Conclusion

The perfect sparkle video effect can add majesty, magic, and wonder to your next project. Furthermore, you can add a slight shimmer and shine and take the viewing experience to a whole new stage with one of these tremendous effects.

More thanks we should add to the video editing software present in the market, every kins of user can easily apply effects to our videos. Don’t like the complicated software like Final Cut Pro or Adobe Premiere or any other tools listed above? Wondershare Filmora video editor now makes it easy to apply all the special effects, including sparkle video effects mentioned above. This simple video editing tool provides the most comprehensive and practical editing elements and workflow around.

And, if you’re not satisfied with Filmora’s inbuilt effects, Filmstock is a one-stop shop for royalty-free video effects, music and sound effects, stock video footage, and more stock media.

Also read: