New 2024 Approved How to Color-Correct an S-Log Footage

How to Color-Correct an S-Log Footage

S-Log is a gamma curve optimized for digital cameras to maximize the image sensor’s performance. Although these videos may look flat and washed out, they contain lots of color information. Even better, video creators can use color correction to edit the S-Log videos and make them look as natural as possible. That’s what this article is all about.

How to Color-Correct an S-Log Footage

This tutorial assumes that you already have an S-Log footage. If not, you can record S-Log footage using most Canon, Sony, and Panasonic cameras.

Let’s get to the steps!

Step1 Adjust the color settings

Start by adding your video to the timeline on Wondershare Filmora and then double-click the video track. Then, click on the Color tab before tapping Advanced.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2 Read and study the histogram

Now you’ll see the Advanced Color Correction pop-up window. Here, you’ll see a histogram with the brightest point on the right and the darkest point on the left. From our example, you can see that the video has more dark pixels than bright ones. Horizontally, the histogram shows you how many pixels are in a certain range of brightness.

Step3 Adjust the image colors

Once you’ve understood the histogram, look for pure black and white parts on the video clip. For example, in this video, you can see that the roofs are pure black and the boat at the bottom-right corner is pure white.

After finding the white and black parts in the video, go to the Light section, then adjust the Highlights to see if you can get a pure white on the boat. If the boat or any other image of your choice doesn’t look pure white, increase the Whites slide to make it whiter.

Now adjust the Shadows settings to reduce the effect and make the roofs look closer to pure black. If you want the roofs to look darker, drag the Blacks slider to the left.

Pro tip: Ensure that the darkest and brightest points don’t cross the broken lines on the edge, or the video will start losing details.

Step4 Adjust the color saturation

Does your video still look a little flat? Probably yes! In that case, click the Color section and adjust the Saturation slider to the right to make the video less flat. Saturation simply means how colorful a video clip is to the viewer. Apart from the color saturation, you can also adjust the Vibrance to make your video objects look more colorful.

Step5 Preview and compare the video

Now it’s time to check and compare the results. To make it easier, click the Eye icon at the top-right corner to switch between the original S-Log video and the color-corrected clip. You can also tap the AB icon and choose Split View-Left/Right to view the clips in the side-by-side mode.

Summary

I guess that was easy, right? Up to this juncture, you should be able to perform basic color correction on your video using Wondershare Filmora. Remember, this video editor packs many other editing tools to bring out your creativity. Give it a try!

Free Download For macOS 10.14 or later

Step2 Read and study the histogram

Step3 Adjust the image colors

Now adjust the Shadows settings to reduce the effect and make the roofs look closer to pure black. If you want the roofs to look darker, drag the Blacks slider to the left.

Pro tip: Ensure that the darkest and brightest points don’t cross the broken lines on the edge, or the video will start losing details.

Step4 Adjust the color saturation

Step5 Preview and compare the video

Summary

Free Download For macOS 10.14 or later

Step2 Read and study the histogram

Step3 Adjust the image colors

Now adjust the Shadows settings to reduce the effect and make the roofs look closer to pure black. If you want the roofs to look darker, drag the Blacks slider to the left.

Pro tip: Ensure that the darkest and brightest points don’t cross the broken lines on the edge, or the video will start losing details.

Step4 Adjust the color saturation

Step5 Preview and compare the video

Summary

Free Download For macOS 10.14 or later

Step2 Read and study the histogram

Step3 Adjust the image colors

Now adjust the Shadows settings to reduce the effect and make the roofs look closer to pure black. If you want the roofs to look darker, drag the Blacks slider to the left.

Pro tip: Ensure that the darkest and brightest points don’t cross the broken lines on the edge, or the video will start losing details.

Step4 Adjust the color saturation

Step5 Preview and compare the video

Summary

How to Use Twixtor Effect to Create Super Slow-Motion Video?

Twixtor is a plug-in program for the After Effects software that allows you to create slow-motion effects from any video clip by adjusting the settings of the plug-in software. But what Twixtor is and why it is utilized are the topics we will cover in this article.

In addition, we will learn how to manipulate its characteristics to get the best possible outcome for our working composition in the Premiere Pro and After Effects plug-ins. Without any further ado, let’s get straight to the business!

Part 1: What is Twixtor and How Does It Work?

Twixtor is a plug-in developed by RevisionFX. It is available for purchase. The plug-in gives users the ability to speed up, slow down, or convert the frame rate of picture sequences, all with special effects. Twixtor can visually estimate what a video is meant to look like in a slow-motion setting using video analysis and interoperability.

Due to the need for unparalleled image quality, RE: Vision Effects developed unique tracking technology that determines every individual pixel’s motion. This technology allows Twixtor to synthesize new innovative frames by warping and interpolating frames from the original sequence, resulting in unprecedented image quality.

Reset the clock to a single-speed setting. Always remember that you can customize the retiming on a frame-by-frame basis!

When items are crossing in the scene, Twixtor is more accurate and shows fewer artifacts than other rendering engines. This reduces the ripping and stretching of items when they cross the frame or exit it completely.

But how does Twixtor work is the million-dollar question! While Premiere includes the ability to slow down your film and has a newer, better-quality version dubbed Optical Flow, it cannot zoom in on your footage (called Pixel Motion in After Effects).

The slow-motion quality is undoubtedly superior to that of simple frame blending, but it is not the finest grade slow motion available. The TWIXTOR from Re: Vision Effects has long been the go-to solution for the most excellent post-slow motion. It is pricey, but it is well worth it.

The Pro edition provides you with the opportunity to fine-tune the pitch of the auto track, as well as the option to employ mattes and alphas to enrich your tracks and the ability to deal with motion vectors from a 3D system, among other features.

Part 2: How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

As we’ve already mentioned, we will be analyzing how Twixtor makes slow mos; we will be starting with the Adobe Premiere Pro. The following are the steps you need to learn to perform it yourself.

Step 1: After importing the video to the timeline, do some basic editing such as trimming and removing audio from the video.

Step 2: Nest the sequence to convert the video into a new sequence automatically.

Step 3: Go to the Effects tab and search for Twixtor, and then drop the Twixtor Pro to the video clip in the timeline.

Step 5: Right-click the video in the timeline again and scroll down to Show Clip Keyframes to enable the Speed option under Time Remapping. You can now enable the GPU acceleration to fast rendering.

Step 6: Click the Keyframe icon to mark the points where you want to begin with the slow-motion effect, and then mark the end part of the slow-motion effect video.

Step 7: Now, drag the line lower to add a slo-mo effect to video.

Remember that your video can sometimes lag if you set the video speed at a meager percentage. To avoid that, utilize settings in a better way to ensure your video works flawlessly.

Part 3: How to Create Super Slow Motion in After Effects with Twixtor?

When working with After Effects software, Twixtor is a convenient plug-in since it allows us to create slow-motion effects from any video source.

We’ll look at an example to better comprehend what we’re talking about in this post. Before we begin our study of the Twixtor plug-in, let us get acquainted with the software’s operating screen to quickly understand the content of this article as we go through our assessment of the Twixtor plug-in.

Step 1: When you launch After Effects, go to File>Import>File to import your footage. Here you can see the actual frame rate of your film. You may drag your film onto the timeline by right-clicking it and selecting New Comp from Selection.

Step 2: Select your video from the timeline in the composition, then go to Effects & Presets pane to search Twixtor, and you will find Twixtor or Twixtor Pro under RE: Vision plug-ins, depending on your version. Drag and drop it to the video in the timeline.

Step 3: In the Twixtor effect controls, enter the frame rate of the film you found previously. The faster and better your slowed footage will become, the higher the frame rate.

For organizational reasons, After Effects employs the “tree-ing“ concept, sometimes known as drop-down menus. Click on the yellow number next to Input: Frame Rate under Source Control. It should be set to 29.97 by default. Please set it to the frame rate you discovered previously in the tutorial.

You can then adjust the speed and time remap mode accordingly. For more information, you can watch the video tutorial below to find out how to create smooth Twixtor effects in Adobe After Effects.

Part 4: How to Get the Twixtor Style Effect on iPhone?

It is possible to shoot videos in slow motion and then play them back at average speed using SloPro – 1000fps Slow Motion Video from Sand Mountain Studios, a fantastic video editing effects tool.

Inserting slow motion cues and changing playback speeds without waiting is possible with renderless editing. It allows you to produce slow-motion films and enables you to insert extremely rapid sequences and cycle between various speeds.

SloPro even enables you to edit your films as they are being recorded, allowing you to choose between slow and fast motion while recording.

This program provides complete support for sharing through social media platforms such as Facebook, Twitter, and YouTube, allowing you to show off your impressive video creations to the rest of the world. It has already been established that SloPro is one of the few videos editing software that includes optical flow as a stand-alone effect.

Step 1: After you’ve imported your video, click on the red Edit button in the top-right corner of the screen to bring up the editing window.

Step 2: Trim the video down to the section that you wish to modify if required using the Clip In and Clip Out functions. It is divided into clips using the speed in and speeds out controls.

Step 3: Tap on the top-left box to bring up a list of fast and slow speed choices. Drag the cursor over the clip to bring up a fast and slow speed options list.

Step 4: If you want to use a slow speed, press the box in the upper right corner and choose Optical Flow from the menu.

This will render the clip with optical flow, resulting in the smooth Twixtor effect you are familiar with. There will be a watermark on your video if you use the program’s free version, but you can easily crop it out.

Conclusion

Slow-Mo videos are undoubtedly watch-worthy. They allow us to observe the fine details and appreciate the video content. But creating one isn’t child’s play. So, we decided to compile this article to inform our worthy readers on how they can get started using Twixtor on Adobe Premiere Pro and After Effects. We hope you had a fun time learning!

02 How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

03 How to Create Super Slow Motion in After Effects with Twixtor?

04 How to Get the Twixtor Style Effect on iPhone?

Part 1: What is Twixtor and How Does It Work?

Reset the clock to a single-speed setting. Always remember that you can customize the retiming on a frame-by-frame basis!

Part 2: How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

As we’ve already mentioned, we will be analyzing how Twixtor makes slow mos; we will be starting with the Adobe Premiere Pro. The following are the steps you need to learn to perform it yourself.

Step 1: After importing the video to the timeline, do some basic editing such as trimming and removing audio from the video.

Step 2: Nest the sequence to convert the video into a new sequence automatically.

Step 3: Go to the Effects tab and search for Twixtor, and then drop the Twixtor Pro to the video clip in the timeline.

Step 6: Click the Keyframe icon to mark the points where you want to begin with the slow-motion effect, and then mark the end part of the slow-motion effect video.

Step 7: Now, drag the line lower to add a slo-mo effect to video.

Remember that your video can sometimes lag if you set the video speed at a meager percentage. To avoid that, utilize settings in a better way to ensure your video works flawlessly.

Part 3: How to Create Super Slow Motion in After Effects with Twixtor?

When working with After Effects software, Twixtor is a convenient plug-in since it allows us to create slow-motion effects from any video source.

Step 3: In the Twixtor effect controls, enter the frame rate of the film you found previously. The faster and better your slowed footage will become, the higher the frame rate.

You can then adjust the speed and time remap mode accordingly. For more information, you can watch the video tutorial below to find out how to create smooth Twixtor effects in Adobe After Effects.

Part 4: How to Get the Twixtor Style Effect on iPhone?

It is possible to shoot videos in slow motion and then play them back at average speed using SloPro – 1000fps Slow Motion Video from Sand Mountain Studios, a fantastic video editing effects tool.

SloPro even enables you to edit your films as they are being recorded, allowing you to choose between slow and fast motion while recording.

Step 1: After you’ve imported your video, click on the red Edit button in the top-right corner of the screen to bring up the editing window.

Step 3: Tap on the top-left box to bring up a list of fast and slow speed choices. Drag the cursor over the clip to bring up a fast and slow speed options list.

Step 4: If you want to use a slow speed, press the box in the upper right corner and choose Optical Flow from the menu.

Conclusion

02 How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

03 How to Create Super Slow Motion in After Effects with Twixtor?

04 How to Get the Twixtor Style Effect on iPhone?

Part 1: What is Twixtor and How Does It Work?

Reset the clock to a single-speed setting. Always remember that you can customize the retiming on a frame-by-frame basis!

Part 2: How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

As we’ve already mentioned, we will be analyzing how Twixtor makes slow mos; we will be starting with the Adobe Premiere Pro. The following are the steps you need to learn to perform it yourself.

Step 1: After importing the video to the timeline, do some basic editing such as trimming and removing audio from the video.

Step 2: Nest the sequence to convert the video into a new sequence automatically.

Step 3: Go to the Effects tab and search for Twixtor, and then drop the Twixtor Pro to the video clip in the timeline.

Step 6: Click the Keyframe icon to mark the points where you want to begin with the slow-motion effect, and then mark the end part of the slow-motion effect video.

Step 7: Now, drag the line lower to add a slo-mo effect to video.

Remember that your video can sometimes lag if you set the video speed at a meager percentage. To avoid that, utilize settings in a better way to ensure your video works flawlessly.

Part 3: How to Create Super Slow Motion in After Effects with Twixtor?

When working with After Effects software, Twixtor is a convenient plug-in since it allows us to create slow-motion effects from any video source.

Step 3: In the Twixtor effect controls, enter the frame rate of the film you found previously. The faster and better your slowed footage will become, the higher the frame rate.

You can then adjust the speed and time remap mode accordingly. For more information, you can watch the video tutorial below to find out how to create smooth Twixtor effects in Adobe After Effects.

Part 4: How to Get the Twixtor Style Effect on iPhone?

It is possible to shoot videos in slow motion and then play them back at average speed using SloPro – 1000fps Slow Motion Video from Sand Mountain Studios, a fantastic video editing effects tool.

SloPro even enables you to edit your films as they are being recorded, allowing you to choose between slow and fast motion while recording.

Step 1: After you’ve imported your video, click on the red Edit button in the top-right corner of the screen to bring up the editing window.

Step 3: Tap on the top-left box to bring up a list of fast and slow speed choices. Drag the cursor over the clip to bring up a fast and slow speed options list.

Step 4: If you want to use a slow speed, press the box in the upper right corner and choose Optical Flow from the menu.

Conclusion

02 How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

03 How to Create Super Slow Motion in After Effects with Twixtor?

04 How to Get the Twixtor Style Effect on iPhone?

Part 1: What is Twixtor and How Does It Work?

Reset the clock to a single-speed setting. Always remember that you can customize the retiming on a frame-by-frame basis!

Part 2: How to Use Twixtor to Create Super Slow-Mo in Adobe Premiere Pro?

As we’ve already mentioned, we will be analyzing how Twixtor makes slow mos; we will be starting with the Adobe Premiere Pro. The following are the steps you need to learn to perform it yourself.

Step 1: After importing the video to the timeline, do some basic editing such as trimming and removing audio from the video.

Step 2: Nest the sequence to convert the video into a new sequence automatically.

Step 3: Go to the Effects tab and search for Twixtor, and then drop the Twixtor Pro to the video clip in the timeline.

Step 6: Click the Keyframe icon to mark the points where you want to begin with the slow-motion effect, and then mark the end part of the slow-motion effect video.

Step 7: Now, drag the line lower to add a slo-mo effect to video.

Remember that your video can sometimes lag if you set the video speed at a meager percentage. To avoid that, utilize settings in a better way to ensure your video works flawlessly.

Part 3: How to Create Super Slow Motion in After Effects with Twixtor?

When working with After Effects software, Twixtor is a convenient plug-in since it allows us to create slow-motion effects from any video source.

Step 3: In the Twixtor effect controls, enter the frame rate of the film you found previously. The faster and better your slowed footage will become, the higher the frame rate.

You can then adjust the speed and time remap mode accordingly. For more information, you can watch the video tutorial below to find out how to create smooth Twixtor effects in Adobe After Effects.

Part 4: How to Get the Twixtor Style Effect on iPhone?

It is possible to shoot videos in slow motion and then play them back at average speed using SloPro – 1000fps Slow Motion Video from Sand Mountain Studios, a fantastic video editing effects tool.

SloPro even enables you to edit your films as they are being recorded, allowing you to choose between slow and fast motion while recording.

Step 1: After you’ve imported your video, click on the red Edit button in the top-right corner of the screen to bring up the editing window.

Step 3: Tap on the top-left box to bring up a list of fast and slow speed choices. Drag the cursor over the clip to bring up a fast and slow speed options list.

Step 4: If you want to use a slow speed, press the box in the upper right corner and choose Optical Flow from the menu.

Conclusion

How to Create Loop Videos Using Filmora

A loop fashion lookbook will be familiar to you if you are a fashion YouTuber. Here we will show you how to record shots and make a creative lookbook to show off your best outfits in an excellent way with Wondershare Filmora.

Shots recording for loop masking

The first and most crucial step for creating a good loop video is to record perfect shots. Here are the steps to record video shots for loop videos.

How to create a loop video

Step1 Set your camera or phone on a tripod. Make sure it stands still and does not move.

Step2 Set it so that you have a door on one side and enough room for the subject to walk through the door and move out of the frame.

Step3 Make sure all your outfits are ready.

Step4 Start recording on your camera. Walk through the door wearing the first outfit. Change your outfits and repeat the step with all your dresses. It would help if you kept the camera rolling while recording all these clips. Turning the recording on and off with every shot will result in many small movements.

Editing footage with a professional video editor - Wondershare Filmora

After recording the shots, the next step is to edit them. Wondershare Filmora is the best software for this purpose. Creating a loop video using filmora is an easy task.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Below is the step-by-step guide on using Wondershare Filmora to create a loop masking or lookbook video.

How to edit a loop lookbook video

Step1 Download and install Wondershare Filmora on your PC or Mac.

Step2 Launch Wondershare Filmora, import the video clip into Filmora and place it on the first track.

Step3 Find a frame with an empty background, i.e., without the subject, and freeze the frame.

Step4 Extend the frozen frame and cut out the rest of the video.

Step5 We are done with the first track so lock it.

Step6 Import the clip again on the second track. And find the sections of the clips where the subject is walking in the video. Cut the remaining part.

Step7 It will create several small sections on the second track.

Step8 Put the first clip at the start of the timeline and move the playhead to find the frame containing enough room for the second outfit.

Step9 Move the second outfit to that playhead area.

Step10 Double-click on the clip, go to effects, and choose a single-line mask.

Step11 Drag the mask to the point where it shows the outfit on its right side.

Step12 Blur the mask edges by increasing blur numbers.

Step13 Click on the add button to add a mask keyframe and move the play head forward until the first outfit leaves the frame.

Step14 Move the mask to the left to reveal the entire frame, and repeat the same process with all outfits.

Step15 After finishing all outfits, copy the clip from the first outfit. And paste it on top of all the tracks after the last outfit. And add a mask keyframe to this section too.

Step16 Unlock the first track and move the playhead to find the point where the subject with 4th outfit moves out of the frame. Then, cut the remaining part of the freeze frame on the right.

Step17 Now move the playhead to the first frame and find where it coincides with the last part of the final frame. Cut the previous piece.

Post it on Instagram, and it will keep playing automatically and act like a loop video. Otherwise, duplicate this edited clip several times to create a longer loop video. Background music plays a vital role in these videos, setting the tone and pace. Follow all the steps in the correct order. Then, create and post loop videos on your social media platforms.

Free Download For macOS 10.14 or later

Below is the step-by-step guide on using Wondershare Filmora to create a loop masking or lookbook video.

How to edit a loop lookbook video

Step1 Download and install Wondershare Filmora on your PC or Mac.

Step2 Launch Wondershare Filmora, import the video clip into Filmora and place it on the first track.

Step3 Find a frame with an empty background, i.e., without the subject, and freeze the frame.

Step4 Extend the frozen frame and cut out the rest of the video.

Step5 We are done with the first track so lock it.

Step6 Import the clip again on the second track. And find the sections of the clips where the subject is walking in the video. Cut the remaining part.

Step7 It will create several small sections on the second track.

Step8 Put the first clip at the start of the timeline and move the playhead to find the frame containing enough room for the second outfit.

Step9 Move the second outfit to that playhead area.

Step10 Double-click on the clip, go to effects, and choose a single-line mask.

Step11 Drag the mask to the point where it shows the outfit on its right side.

Step12 Blur the mask edges by increasing blur numbers.

Step13 Click on the add button to add a mask keyframe and move the play head forward until the first outfit leaves the frame.

Step14 Move the mask to the left to reveal the entire frame, and repeat the same process with all outfits.

Step15 After finishing all outfits, copy the clip from the first outfit. And paste it on top of all the tracks after the last outfit. And add a mask keyframe to this section too.

Step16 Unlock the first track and move the playhead to find the point where the subject with 4th outfit moves out of the frame. Then, cut the remaining part of the freeze frame on the right.

Step17 Now move the playhead to the first frame and find where it coincides with the last part of the final frame. Cut the previous piece.

How to Create a Slideshow with Icecream Slideshow Maker

How to Make a Slideshow with Icecream Slideshow Maker

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

The Icecream slideshow creator software is a known name in the domain of graphic design applications. Keep reading ahead to learn the knowhow of creating Icecream presentations!

Part 1 What is Icecream Slideshow Maker?

Slideshows are interesting content presentation tools that have the potential to deliver even the most customary information in a manner that is engaging enough to hold your audience captive. Browsing across the web or the IT market, you can easily encounter a cluster of slideshow builder software and tools that are ready to cater to your requirement of making top quality slideshow presentations that suit a diversity of personal and professional needs.

Moving ahead with the discussion, let us have a talk about the Icecream slide show maker program, which can definitely be a great choice to design graphic artworks of professional excellence, thanks to the latter’s upgraded features and graphic editing utilities. You can pick the tool to create fun-filled slideshows of cherished personal events, or craft elusive and explanatory business presentations to deliver the most precise company and product information to your clients.

Let us now dive deeper into the program specifications and proceed to take a look at the distinguishing features of the Icecream slideshow maker program in the following section:

● The software grants you the liberty to adjust the screen time and the transition play duration of each of the slide contents.

● You can uplift the feel of your presentations with an upbeat background audio, while choosing the same from the editor’s preset media library in a preferred file format.

● You are allowed to customize the presentation slides with matching text annotations and adjust its font, size, orientation, color and animation.

● Working with the program lets you ensure a seamless presentation flow with a diverse range of inbuilt transition effects.

● Before you set into the final creation process, the software facilitates you with a preview of your work, with all the applied effects, element inclusions and parameter variations introduced. You can thus, observe and modify the presentation if required.

● You can save the slideshows midway of the creation process and resume whenever you like, and prefer to sort the presentation slides in a definite or random sequence.

● The software allows you to create and export high resolution 4K slideshows by burning them to CDs and DVDs.

● The created slideshows can be uploaded to online storage accounts and shared across a variety of social media platforms, in almost any common output file format.

● The software is a Windows exclusive program and works effectively well with the Windows XP, Vista, 7, 8, 8.1 and 10 operating system versions.

Part 2 How to Use an Ice Cream Slideshow Maker?

By now, you must have become quite familiar with the credibility of designing slideshow presentations with the Icecream slideshow creator software. However, the real essence lies in taking a practical experience of working with the program to comprehensively understand the slideshow design process in detail.

Adhering to the aforesaid concern, let us try hands at having an in depth understanding of different aspects of working on a slideshow presentation within the program interface through the following stepwise tutorial guide:

User’s Guide to Work With the Icecream Slideshow Maker Program

Step 1: Download and Install Icecream Slideshow Creator

To begin with, visit the official website of the program to download the same in your Windows device. Once the download is successful, you will need to save and run the program’s installation files sin your system. Having done that, you will be directed to the software’s ‘Installation Wizard’ to initiate a quick an easy installation process.

Step 2: Import Media Files

Post a successful installation, proceed to launch the program and wait for the latter’s welcome screen to appear. In the launch screen, navigate to and tap any one of the ‘Add Photo’ or ‘Add Folder’ buttons at the top left corner to import either a single media file, or an entire media folder to the program’s editing workspace.

Instead of using the ‘Add Folder’ option at the top left, you can also select multiple files by pressing and holding the ‘Ctrl’ key son your system’s keyboard and import them to the editor timeline, all at once. You can alternatively, click on the ‘Add Files to Start Your Photostory’ tab in the center of the software’s welcome screen to import the required media files.

Clicking on any of the aforesaid buttons or tabs will direct you to a ‘File Explorer’ window, where you can make the desired media selections. Your choices are however; filtered according to their respective file formats and only those in line with the formats supported by the Icecream Slideshow creator program are imported to the timeline.

Step 3: Configure the Presentation Settings

As soon as you finish the media import process, the editing workspace bifurcates to present the ‘Queue’ window at the left and ‘Preview and Settings’ window at the right side of the screen. This is the space where you can proceed to configure your presentation settings.

● File Sorting

To sort the arrangement of a media file, navigate to the ‘File Queue Panel’ at the left and click on the desired file, while using the ‘Arrow Keys’ at the right to change the latter’s position in the queue, or choose to delete it from the queue by tapping the ‘Recycle Bin’ icon beside the file.

● Duration and Transition Adjustments

Proceeding further, you can try hands at customizing the duration and transition effects for each of the added media files within the queue. All you need to do is, navigate to and click on the respective tabs within the window. Hit the ‘Time’ button to adjust the screen time of the slides or click on the ‘Transitions’ tab to include suitable animation effects between successive slides for a smooth presentation flow.

You can even stick with a random transition effect to add to the slides, or choose to add no transition effect at all. The inbuilt slideshow player the right side of the editor workspace automatically plays the preview of the applied transition effects. The ‘Transition’ and ‘Time’ settings are the sole customizations that you can apply individually to the slides, the rest of the effects being universally applicable to all the presentation slides together.

If you are interested to apply a particular transition and play duration to all the slides, navigate to and click within the gray bar at the bottom of the file queue to apply the same transition and time characteristics to all the slides of the presentation. You can even opt to delete all the added media files at the same time by tapping the ‘Clear List’ button.

● Media Resolution

Working with the Icecream slideshow creator program, you are allowed to adjust the output resolution of your slideshow in the preview window at the right side of the editor timeline. The resolution range lies between 640 x 480 to 1600 x 1200 pixels. Moving further, you can set common play duration for all the transition effects within different slides of the presentation that you have included within the queue.

● Aspect Ratio

You can choose to either keep the actual aspect ratio of the media files or customize the same to fit into the screen size. To go with the former choice, click within the ‘Scale to Fit’ checkbox. In case you wish to stick to the latter option, click inside the ‘Original Ratio’ checkbox. To learn more about working with any of the aforesaid settings, navigate to and click on the ‘Question Mark’ icon alongside each setting.

● Audio Settings

To add upbeat background music to your presentation, navigate to and tap the ‘Add Audio’ button at the bottom left corner of the ‘Preview’ window. You can choose a desired audio track from your system and use the same as the background sound of the slideshow.

You are additionally, permitted to configure the added music track in line with your specific preferences using the ‘Fade’ and ‘Offset’ settings at the right side of the selected music file. To play the audio track immediately with a time shift, choose to set a negative offset value. Likewise, enter a positive offset value to start playing the track after the lapse of a specified time period.

When you are done with adjusting all the settings and adding the desired effects, proceed to watch a preview of the same in the right side ‘Preview Pane’ of the editor workspace and move ahead with creating the slideshow presentation.

Step 4: Create Your Slideshow

If the slideshow preview ensures that everything is at the right place, navigate to the bottom right corner of the editing timeline and click on the ‘Create’ button start building your presentation. You can tap on the ‘Pause/Resume’ and ‘Cancel’ buttons at the bottom of the screen at any time throughout the project creation process. A pop up window will notify you the completion of the design process, while asking you to click on the ‘Open Folder’ button to view your creation in the latter’s destination folder.

Part 3 How Do You Add Music to an Icecream Slideshow?

Supplementing your slideshow presentations with appealing background music adds that extra spark to your creation, while making them stand out of the crowd. A cohesive audio works to create a perfect sync between the contents and mood of your presentation. Having said that, let us look through the process to add suitable background music to your Icecream slideshow in the following section:

User’s Guide for Adding Music to an Icecream Slideshow

Step 1: Download and Install the Program

Navigate to the home website of the Icecream Slideshow maker program to initiate a free download of the software into your system and proceed to install the same to start the slideshow creation process.

Icecream Slideshow Maker Official Download Link:

https://icecreamapps.com/Download-Slideshow-Maker/

Step 2: Import Media Files

Begin with importing the selected media files to the editor workspace of the program in either of the following ways:

● Add the images directly from your system to the editor timeline through the conventional ‘Drag and Drop’ method.

● Navigate to and hit the ‘Add Photo’ button at the top left corner of the program’s main workspace to browse for the media files in the ‘Windows Explorer’.

● Click on the ‘Add Folder’ button to import all the media files within a selected folder.

Step 3: Sort the Imported Files

Once you are done with importing all the media files, you can see them appear within the ‘File Queue’ at the left window of the slideshow creator program. Use the ‘Up/Down’ arrow keys to sort the media files in your preferred order, for example, arranging them according to their specific file names. The file sorting options are available at the right side of the ‘File Queue’.

Step 4: Include Text Customizations

Navigate to the ‘Text Column’ of the ‘File Queue’ and tap the ‘Add Text’ button to include text annotations within each slide of your presentation. A ‘Text Panel’ will pop up, where you can choose to add color, position and font customizations to the included text, followed by previewing the effect on every slide within the ‘Text Panel’ itself.

Step 5: Add a Desired Background Music

The Icecream Slideshow maker pro allows you to include a background music track within your presentation. For working towards the inclusion process, you will have to import the desired audio files to the program’s editor timeline. The software works well with the WAV, WMA, FLAC, M4A, MP3 and OGG audio file formats. Navigate to and hit the ‘Add Audio’ button in the editor workspace to ‘Drag and Drop’ the desired music files within the software’s timeline.

There is an option to create a playlist of the selected audio tracks, along with dragging the files to set them in a preferred sequence within the playlist. You are also granted the liberty to try hands at looping the audio playback and uplift the tracks with fade and offset effects within the playlist pane.

Step 6: Tweak Some Extra Settings

If you are keen towards making your presentation more impressive, try experimenting with including transition effects within the slides. Though the Icecream slideshow maker full version supports the application of default random transitions, you are allowed to add and customize the same as per your will, both, separately for each slide, as well as to the entre presentation as a whole.

You can even choose to add no transition effect at all, or set the same transition value for all the media files within the queue, by navigating to and clicking on the ‘Common Image Settings in the ’File Queue’ window.

Step 7: Output Resolution

Set a preferable output resolution to generate a premium quality slideshow presentation. To do this, navigate to the bottom left corner of the ‘Preview’ window at the right side of the editor workspace and choose a desired resolution for the slideshow from a range of values, such as, 1280 x 1024, 2560 x 1440, 1920 x 1080, etc., in the ‘Resolution’ tab.

Step 8: Format Selection

The next thing you need to do is, select a convenient output file format for your presentation. You can pick anyone from the available AVI, WebM, MP4, MOV file formats. To make your choice, navigate to the bottom of the ‘File Queue’ window at the left and click on the ‘File Format’ dropdown arrow at the right. A list of the output formats supported by the program appears next, and you are free to pick the one you like.

Step 9: Create Your Icecream Slideshow

When you have finalized all the arrangements and settings, navigate to and hit the ‘Preview’ button at the bottom right corner of the ‘Preview’ window to initiate a mock run of your slideshow in the software’s inbuilt slideshow player. If everything seems fine, proceed to start the slideshow creation process by clicking on the ‘Create’ button.

The process may require you to wait for a few moments before the final presentation output is generated. Nonetheless, you can always keep a track of the creation process through the elapsed and remaining duration in the ‘Progress Bar’ at the bottom of the program’s editing workspace. A completion prompt will pop up as soon as the slideshow is ready.

Creating Music Slideshows in Filmora

When searching for an Icecream slideshow maker alternative to craft your slideshow presentations, you can move ahead with picking the Wondershare Filmora Video Editor slideshow creator program for high end and professional quality results. While the aforementioned software is an all in one package for almost any of your most diverse editing needs, music slideshows are a specialty of the same on account of the following reasons:

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Within by the Filmora slideshow creator program.

● Working on your music presentation in the software, you are allowed to cut and trim the music files automatically as well as manually to ward off undesired portions from the included audio.

● You can pick the most suitable soundtrack from the hundreds of choices available within Filmora’s preset audio library and uplift them with a variety of audio effects.

● Using the software, you can proceed with recording your voiceover, followed by applying fade in and fade out effects to the same.

● The software allows you to design professional slideshows for personal media sharing across various platforms, along with catering to product marketing needs and company business concerns.

● Ending Thoughts →

● Icecream slideshow maker review claims that the latter is an effective slideshow creator and graphic editor program.

● Working with the program, you can easily create high quality photo, video and music slideshow presentations in a quick time span.

● Mentioning about the alternatives to the aforesaid program, you can comfortably choose the Wondershare Filmora slideshow maker software to address the concern.