Best Frame Rate for 4K Video

People in the videography ad filmmaking world use complicated terminology like Ultra High Def to describe 4K videos. Even though you are not a complete stranger to the term 4K, you might still be unaware of what it means.

In a nutshell, 4K is the highest resolution you can watch your movies and videos. The details are incredibly crisp, meaning you can see pimples or the pores on an actor’s face through the screen. However, the frame rate will significantly affect how you enjoy a 4K video. Therefore, it would be wise to learn how to choose the ideal frame rate to suit your needs.

Keep reading this article to learn more about frame rates and which is suitable for a 4K video.

How Do Frame Rates Affect Video Viewing?

The motion will appear smoother if your video contains more frames per second. Even though your viewers are not tech-savvy, they will definitely notice the difference.

Consider a video of a duck drinking water from a pond. If you film and playback the same video in 24, 30, and 60fps, you will see a noticeable difference, assuming your shutter speed is set according to the 180-degree shutter rule.

If you are filming quicker motions of wildlife and birds, you are better off sticking to higher resolutions to give the viewer a pleasant experience and ensure the motion is fluid.

On the other hand, lower frame rates like 24fps are ideal for human movements, which are not as smooth as wildlife. Suppose you used 60fps for a cinematic film or a TV show. The video would look a bit odd because that is not how we see things in the natural world. In addition, your viewers aren’t used to such smoothness.

Viewing Requirements of 4K Videos

You may have heard about 4K videos and wondered what people mean by that term. In simple terms, a 4K video is a high-resolution video that is four times the usual 1080p HD video. When it comes to 4K videos, there are two standard resolutions. One of them is the standard for Digital Cinema which is 4096*2160 pixels. The other is for television and is 3840*2160 pixels.

To stream 4K content, you need a bandwidth between 10 and 20 Mbps. On the other hand, streaming platforms like Netflix require higher bandwidths of not less than 15 Mbps. In addition to the bandwidth we mentioned earlier, you need a 4KTV or 4K monitor.

This specification was brought up at the UHD Alliance, a union of more than 50 tech companies working together to support 4K content. Tech companies ought to ensure the devices they produce are compatible with 4K videos, which are becoming increasingly popular.

Below is a list of requirements any electronic device should fulfill before being termed a 4KTV or 4K monitor.

• A resolution of not less than 3840*2160.
• A 10-bit color depth that allows for 1,024 shades of red, yellow, and blue.
• A high dynamic range for color accuracy.
• An excellent combination of black level and peak brightness. The peak brightness should not exceed 1,000 nits, and the black level shouldn’t go below 0.5 nits. Alternatively, the peak brightness shouldn’t exceed 540 nits; neither should the black level plummet below 0.0005 nits.

Best Frame Rate for 4K Video

We all know that the frame rate you choose for your video will significantly impact the viewer’s experience and the overall style of your video. The frame rate will also affect how the video looks. For instance, a frame rate lower than 24fps will make your video look unprofessional and of poor quality. The content will also flicker because there aren’t many still images per second.

On the other hand, a lower FPS causes the file size to be smaller, causing it to consume a lower bandwidth. The vice versa is also true. Now that you understand these facts, you might wonder which frame rate would be best for your 4K videos.

Research reveals that the most acceptable frame rate is 30fps and 60fps. This is because the motion will appear natural to the human eye without being too fast or unrealistic.

If you are wondering what is the best frame rate for 4k videos, we urge you to select 60fps because it contains more detail. The higher frame rate also makes the motion look very smooth and crisp. Perhaps you want to shoot a slow-motion video. In that case, an even higher frame rate of 120fps would be ideal.

How To Choose The Base Frame Rates for Your Next Video

Choosing a frame rate for your videos is not complicated. However, it is not a straightforward process either. There are numerous moving parts that ought to work harmoniously for your video to turn out perfect and guarantee your audience will have a pleasant viewing experience. Before we dive into choosing the best frame rate for your 4K videos, let’s help you understand the filmmaking process.

Most filmmakers and videographers see it fit to shoot videos in 120p or 4K. This step makes their work easier during the editing process. If the raw footage is in 4K, they can de-emphasize or retain specific plot points that would look great in the final video. However, not everyone is shooting a video for Hollywood. Therefore, shooting in 4K on your laptop for your YouTube channel might be difficult.

Below are some factors you should consider when choosing the best frame rate for a 4k video.

File size

Shooting your video at a higher frame rate means more still images are packed into a single second of the video. Therefore, you will end up with a larger file size. If you want to shoot a video for your YouTube channel, it would be wise to stick to a smaller frame rate.

Purpose

It wouldn’t make sense to shoot a talking head video at more than 24fps. However, a higher frame rate would be ideal for a travel vlog, where the details need to be crisp.

Medium of delivery

The standard frame rate for television is 24fps. On the other hand, it would be best to stick to a higher frame rate of 60fps if you intend to shoot content for the silver screen.

Motion in the video

Lastly, the movement within the video will play a massive role in the frame rate you choose. The faster the motion, the higher the frame rate needs to be. For instance, action movies don’t do well in frame rates of less than 60 fps.

How To Set the Frame Rate of Your Editing Tools

Even though you didn’t use the ideal frame rate for 4k video during filming, you could use an editing tool to tweak the frame rate to where you need it to be. In our opinion, Wondershare Filmora is an excellent editing tool to set the ideal frame rate and take your videos to the next level.

Wondershare Filmora is a feature-rich platform that takes the tedium out of editing your videos and makes the outcome look spectacular. People won’t believe you when you say you edited the video yourself!

The platform is user-friendly, eliminating the need for a learning curve. You also don’t need to be an experienced editor or graphic designer to use this platform. Here is a list of nifty features you might find helpful on this platform.

• GIF support
• Audio equalizer
• Advanced text editing
• Noise removal
• Scene detection
• Audio mixer
• Color tuning

Out of all the wonderful features mentioned above, we will zero in on 4K editing support for now. You can use this feature to edit and export videos up to 4K without breaking a sweat.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Wondershare Filmora allows you to customize your 4K videos by zooming in on a particular scene, tilting the video, or incorporating panning to give it a serene effect. We guarantee you will have fun using this platform and will get better at creating exquisite 4K content for your channel.

Below is a simple guide on using Wondershare Filmora to set the 4k video frame rate.

Step1 Launch the platform on your device and select the “File” tab. After a drop-down menu appears, select “Project Settings.”

Step2 In the dialogue box, select “Frame Rate” and choose the frame rate you think is ideal for your video.

Step3 Click “OK” and edit the videos as you like.

Conclusion

4K is the trend of the era, and it would be a shame if you got left behind. The viewer’s expectations are rising steadily, and they would rather skip your video to watch another if the quality is not up to par. In addition to giving you a competitive edge, 4K videos are very crisp and allow you to enjoy deep, vibrant colors.

You can also capture still photos from the video without compromising on quality. We can go on and on about the benefits of adopting 4K resolution in your videos. Therefore, it would be wise to increase your knowledge base and learn everything there is to know about 4K videos and how to set the best frame rates.

Free Download For macOS 10.14 or later

Wondershare Filmora allows you to customize your 4K videos by zooming in on a particular scene, tilting the video, or incorporating panning to give it a serene effect. We guarantee you will have fun using this platform and will get better at creating exquisite 4K content for your channel.

Below is a simple guide on using Wondershare Filmora to set the 4k video frame rate.

Step1 Launch the platform on your device and select the “File” tab. After a drop-down menu appears, select “Project Settings.”

Step2 In the dialogue box, select “Frame Rate” and choose the frame rate you think is ideal for your video.

Step3 Click “OK” and edit the videos as you like.

Conclusion

4K is the trend of the era, and it would be a shame if you got left behind. The viewer’s expectations are rising steadily, and they would rather skip your video to watch another if the quality is not up to par. In addition to giving you a competitive edge, 4K videos are very crisp and allow you to enjoy deep, vibrant colors.

You can also capture still photos from the video without compromising on quality. We can go on and on about the benefits of adopting 4K resolution in your videos. Therefore, it would be wise to increase your knowledge base and learn everything there is to know about 4K videos and how to set the best frame rates.

Discover How to Create Professional Foggy Text Reflection Effects in the Filmora Video Editor

Preparation

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Go to Titles → drag the Default Title to the Timeline below. Double-click on the clip to open its settings. Here, type in your text → change the font to Montserrat Light. Scroll down and increase Text Spacing to 5.0. Now, select only the first word in the box where you typed your text. Then, change its font to Montserrat Bold. Click OK.

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Double-click the Snapshot clip → go to the Video tab → click the highlighted button below to flip the text. Then, take a Snapshot of this flipped version of the text and delete the clip from the Timeline.

Step 5

Visit the free stock footage site Mixkit and download any smoke or fog background video you like. Then, go to Filmora → My Media → Import Media → and select the footage you downloaded to import it into the video editor. Then, drag the Smoke clip to the Timeline and make it 6 seconds long.

Step 6

Double-click on the clip → go to Color. Now, change Contrast to “49”, Saturation to “100”, and Brightness to “18”. Below, set the 3D LUT option to “Game of Thrones”. Click OK.

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Set the Playhead to the second frame and drop the first Snapshot we took earlier at that starting point. Drag the clip to be 6 seconds long. Then, double-click on the clip and adjust the settings exactly as you see in this image here. Don’t click on OK yet.

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Drag the same Snapshot file to Track 4, directly on top of the clip in Track 3. Make its duration the same too. Now, double-click on this clip and apply the exact same settings as in the image here. Don’t click on OK yet.

Step 13

Move the Playhead to the 17th frame → increase the Opacity to 6%. Now, move the Playhead to 5 seconds and 23rd frame → change X-axis value to “-1944” and the Opacity to 0%. Click OK.

Step 14

Go to Sample Color and drag the White color on Track 6 in the Timeline. Place this clip at the same starting point as the snapshots below it. Set its duration the same as the clips below too. Then, move the Playhead at its starting point.

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Drag another White Sample Color to Track 5 this time. Adjust its duration and starting point to be the same as the clip above it. Double-click on it → go to Video → Mask → Import. Here, select the flipped text Snapshot we created earlier.

Step 19

Now, go to Animation and add a keyframe at the starting point. Then, compress the text on the preview screen exactly as we did before with the other one. Then, add a keyframe at the 1-second position of the clip. Then, adjust the Y-axis position to create a reflection effect, just like this.

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Go back to the Video tab from the upper-left corner of the panel. Now, move the Playhead to the clip’s starting point. Select the Mask tab. Add a keyframe. Move the Playhead to 1 second and set the Blur Strength to 6%.

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Go to Sample Color and drag the “Gradient 4” color to Track 7 on the Timeline. Allow this clip to start from the very beginning and adjust its end time to be the same as all the other clips.

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Change its Blending Mode to “Screen”. Go to the Animation tab and decrease the Opacity to 0%. Move the Playhead to frame 10 → increase Opacity to 12%. Move the Playhead to the 5-second position → add a keyframe. Then, move the Playhead at 5 seconds and 23rd frame → increase the Opacity back to 100%. Click OK.

Step 28

Go to Effects and drag the Cinema effect to Track 9. Adjust its duration to match all the other clips. Double-click on the clip and increase its Border Height to “0.10”. Click OK.

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

• Create a foggy text reflection effect in the Filmora video editor
• Add and adjust keyframes to clips
• Edit and customize text
• Take and edit snapshots

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Go to Titles → drag the Default Title to the Timeline below. Double-click on the clip to open its settings. Here, type in your text → change the font to Montserrat Light. Scroll down and increase Text Spacing to 5.0. Now, select only the first word in the box where you typed your text. Then, change its font to Montserrat Bold. Click OK.

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Double-click the Snapshot clip → go to the Video tab → click the highlighted button below to flip the text. Then, take a Snapshot of this flipped version of the text and delete the clip from the Timeline.

Step 5

Visit the free stock footage site Mixkit and download any smoke or fog background video you like. Then, go to Filmora → My Media → Import Media → and select the footage you downloaded to import it into the video editor. Then, drag the Smoke clip to the Timeline and make it 6 seconds long.

Step 6

Double-click on the clip → go to Color. Now, change Contrast to “49”, Saturation to “100”, and Brightness to “18”. Below, set the 3D LUT option to “Game of Thrones”. Click OK.

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Set the Playhead to the second frame and drop the first Snapshot we took earlier at that starting point. Drag the clip to be 6 seconds long. Then, double-click on the clip and adjust the settings exactly as you see in this image here. Don’t click on OK yet.

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Drag the same Snapshot file to Track 4, directly on top of the clip in Track 3. Make its duration the same too. Now, double-click on this clip and apply the exact same settings as in the image here. Don’t click on OK yet.

Step 13

Move the Playhead to the 17th frame → increase the Opacity to 6%. Now, move the Playhead to 5 seconds and 23rd frame → change X-axis value to “-1944” and the Opacity to 0%. Click OK.

Step 14

Go to Sample Color and drag the White color on Track 6 in the Timeline. Place this clip at the same starting point as the snapshots below it. Set its duration the same as the clips below too. Then, move the Playhead at its starting point.

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Drag another White Sample Color to Track 5 this time. Adjust its duration and starting point to be the same as the clip above it. Double-click on it → go to Video → Mask → Import. Here, select the flipped text Snapshot we created earlier.

Step 19

Now, go to Animation and add a keyframe at the starting point. Then, compress the text on the preview screen exactly as we did before with the other one. Then, add a keyframe at the 1-second position of the clip. Then, adjust the Y-axis position to create a reflection effect, just like this.

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Go back to the Video tab from the upper-left corner of the panel. Now, move the Playhead to the clip’s starting point. Select the Mask tab. Add a keyframe. Move the Playhead to 1 second and set the Blur Strength to 6%.

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Go to Sample Color and drag the “Gradient 4” color to Track 7 on the Timeline. Allow this clip to start from the very beginning and adjust its end time to be the same as all the other clips.

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Change its Blending Mode to “Screen”. Go to the Animation tab and decrease the Opacity to 0%. Move the Playhead to frame 10 → increase Opacity to 12%. Move the Playhead to the 5-second position → add a keyframe. Then, move the Playhead at 5 seconds and 23rd frame → increase the Opacity back to 100%. Click OK.

Step 28

Go to Effects and drag the Cinema effect to Track 9. Adjust its duration to match all the other clips. Double-click on the clip and increase its Border Height to “0.10”. Click OK.

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

• Create a foggy text reflection effect in the Filmora video editor
• Add and adjust keyframes to clips
• Edit and customize text
• Take and edit snapshots

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Go to Titles → drag the Default Title to the Timeline below. Double-click on the clip to open its settings. Here, type in your text → change the font to Montserrat Light. Scroll down and increase Text Spacing to 5.0. Now, select only the first word in the box where you typed your text. Then, change its font to Montserrat Bold. Click OK.

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Double-click the Snapshot clip → go to the Video tab → click the highlighted button below to flip the text. Then, take a Snapshot of this flipped version of the text and delete the clip from the Timeline.

Step 5

Visit the free stock footage site Mixkit and download any smoke or fog background video you like. Then, go to Filmora → My Media → Import Media → and select the footage you downloaded to import it into the video editor. Then, drag the Smoke clip to the Timeline and make it 6 seconds long.

Step 6

Double-click on the clip → go to Color. Now, change Contrast to “49”, Saturation to “100”, and Brightness to “18”. Below, set the 3D LUT option to “Game of Thrones”. Click OK.

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Set the Playhead to the second frame and drop the first Snapshot we took earlier at that starting point. Drag the clip to be 6 seconds long. Then, double-click on the clip and adjust the settings exactly as you see in this image here. Don’t click on OK yet.

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Drag the same Snapshot file to Track 4, directly on top of the clip in Track 3. Make its duration the same too. Now, double-click on this clip and apply the exact same settings as in the image here. Don’t click on OK yet.

Step 13

Move the Playhead to the 17th frame → increase the Opacity to 6%. Now, move the Playhead to 5 seconds and 23rd frame → change X-axis value to “-1944” and the Opacity to 0%. Click OK.

Step 14

Go to Sample Color and drag the White color on Track 6 in the Timeline. Place this clip at the same starting point as the snapshots below it. Set its duration the same as the clips below too. Then, move the Playhead at its starting point.

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Drag another White Sample Color to Track 5 this time. Adjust its duration and starting point to be the same as the clip above it. Double-click on it → go to Video → Mask → Import. Here, select the flipped text Snapshot we created earlier.

Step 19

Now, go to Animation and add a keyframe at the starting point. Then, compress the text on the preview screen exactly as we did before with the other one. Then, add a keyframe at the 1-second position of the clip. Then, adjust the Y-axis position to create a reflection effect, just like this.

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Go back to the Video tab from the upper-left corner of the panel. Now, move the Playhead to the clip’s starting point. Select the Mask tab. Add a keyframe. Move the Playhead to 1 second and set the Blur Strength to 6%.

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Go to Sample Color and drag the “Gradient 4” color to Track 7 on the Timeline. Allow this clip to start from the very beginning and adjust its end time to be the same as all the other clips.

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Change its Blending Mode to “Screen”. Go to the Animation tab and decrease the Opacity to 0%. Move the Playhead to frame 10 → increase Opacity to 12%. Move the Playhead to the 5-second position → add a keyframe. Then, move the Playhead at 5 seconds and 23rd frame → increase the Opacity back to 100%. Click OK.

Step 28

Go to Effects and drag the Cinema effect to Track 9. Adjust its duration to match all the other clips. Double-click on the clip and increase its Border Height to “0.10”. Click OK.

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

• Create a foggy text reflection effect in the Filmora video editor
• Add and adjust keyframes to clips
• Edit and customize text
• Take and edit snapshots

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Go to Titles → drag the Default Title to the Timeline below. Double-click on the clip to open its settings. Here, type in your text → change the font to Montserrat Light. Scroll down and increase Text Spacing to 5.0. Now, select only the first word in the box where you typed your text. Then, change its font to Montserrat Bold. Click OK.

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Double-click the Snapshot clip → go to the Video tab → click the highlighted button below to flip the text. Then, take a Snapshot of this flipped version of the text and delete the clip from the Timeline.

Step 5

Visit the free stock footage site Mixkit and download any smoke or fog background video you like. Then, go to Filmora → My Media → Import Media → and select the footage you downloaded to import it into the video editor. Then, drag the Smoke clip to the Timeline and make it 6 seconds long.

Step 6

Double-click on the clip → go to Color. Now, change Contrast to “49”, Saturation to “100”, and Brightness to “18”. Below, set the 3D LUT option to “Game of Thrones”. Click OK.

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Set the Playhead to the second frame and drop the first Snapshot we took earlier at that starting point. Drag the clip to be 6 seconds long. Then, double-click on the clip and adjust the settings exactly as you see in this image here. Don’t click on OK yet.

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Drag the same Snapshot file to Track 4, directly on top of the clip in Track 3. Make its duration the same too. Now, double-click on this clip and apply the exact same settings as in the image here. Don’t click on OK yet.

Step 13

Move the Playhead to the 17th frame → increase the Opacity to 6%. Now, move the Playhead to 5 seconds and 23rd frame → change X-axis value to “-1944” and the Opacity to 0%. Click OK.

Step 14

Go to Sample Color and drag the White color on Track 6 in the Timeline. Place this clip at the same starting point as the snapshots below it. Set its duration the same as the clips below too. Then, move the Playhead at its starting point.

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Drag another White Sample Color to Track 5 this time. Adjust its duration and starting point to be the same as the clip above it. Double-click on it → go to Video → Mask → Import. Here, select the flipped text Snapshot we created earlier.

Step 19

Now, go to Animation and add a keyframe at the starting point. Then, compress the text on the preview screen exactly as we did before with the other one. Then, add a keyframe at the 1-second position of the clip. Then, adjust the Y-axis position to create a reflection effect, just like this.

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Go back to the Video tab from the upper-left corner of the panel. Now, move the Playhead to the clip’s starting point. Select the Mask tab. Add a keyframe. Move the Playhead to 1 second and set the Blur Strength to 6%.

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Go to Sample Color and drag the “Gradient 4” color to Track 7 on the Timeline. Allow this clip to start from the very beginning and adjust its end time to be the same as all the other clips.

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Change its Blending Mode to “Screen”. Go to the Animation tab and decrease the Opacity to 0%. Move the Playhead to frame 10 → increase Opacity to 12%. Move the Playhead to the 5-second position → add a keyframe. Then, move the Playhead at 5 seconds and 23rd frame → increase the Opacity back to 100%. Click OK.

Step 28

Go to Effects and drag the Cinema effect to Track 9. Adjust its duration to match all the other clips. Double-click on the clip and increase its Border Height to “0.10”. Click OK.

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

• Create a foggy text reflection effect in the Filmora video editor
• Add and adjust keyframes to clips
• Edit and customize text
• Take and edit snapshots

Free Download Free Download

How To Zoom In On TikTok Videos?

Abundant Video Effects - Wondershare Filmora

Provide abundant video effects - A creative video editor

Powerful color correction and grading

Detailed tutorials are provided by the official channel

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Being an After Effects Editor, You Often Find Yourself the Need to Add Motion Blur After Effects. This Guide Has Got You Covered. Follow to Find Out How to Add Motion Blur in After Effects

Everyone has seen those transition or animation video cuts when something doesn’t quite seem right; the movement appears forced or the playback is choppy. Typically, this occurs because a motion blur effect was not used while editing. Learning the ins, outs, rights, and wrongs of Motion Blur in After Effects is one of the most thrilling early steps in the motion graphics adventure. Learning how and when to utilize it successfully is a true “level up” moment for most designers.

Making everything you add to a motion graphic or animation project appear like it belongs there organically and hasn’t been “artificially” inserted is a crucial component. Adding motion blur After Effects Is a fantastic tool for making items mix more naturally in your compositions. Let’s quickly examine Motion Blur with all of this in mind. To help you better grasp motion blur and how to add motion blur to flawlessly merge objects in your video projects or even create styled effects, we’ve put up a detailed guide here.

1. Import Files
2. Utilize Filmstock
3. Edit Effect
4. Apply filters
5. Export

Part 1. What is Motion Blur Effects

Let’s start with a little introduction before learning how to apply motion blur. The visual result of an item moving while being photographed in conjunction with the shutter speed of the camera is called motion blur. When we swiftly move our heads from side to side, this effect also naturally occurs with our eyes, but we aren’t aware of it since our brains “edit” it for us. It may be startling and awkward to watch when items are moving on the screen, particularly rapid motion, without any kind of blurring effect.

Motion blur was introduced into animation to aid in the blending of frames and replicate the blurring that was seen in earlier cameras as a result of fast-moving objects. When a moving item keeps moving while light is still reaching our eyes, motion blur results. The goal of Motion Blur in After Effects is to replicate this phenomenon. After Effects will duplicate your layer several times when it changes in size or location. Then, it will offset it in various ways. This is closely related to the direction and pace of your layer’s animation.

These days, we have cameras with fast shutter speeds, which allows us to almost completely remove motion blur. Without motion blurring, each frame of your animation is like a flawless still image, making the action seem a little disorienting. Each picture captures the exact moment in time, despite the fluid motion. However, the absence of motion blur is what viewers do notice. Because of this, visual effects creators often use artificial motion blur in their effects to replicate what the viewer would experience if the element were really there in the picture.

Part 2. How to Add Motion Blur in After Effects

In videos, slow-motion may be used in a variety of ways, such as to convey the emotional context of a story or make beautiful slideshow backdrops. It doesn’t matter why you want to make a slow-motion sequence; After Effects’ slow-motion effect will work well. Click the Motion Blur layer switch to turn Motion Blur on or off. Make sure you can render out Motion Blur by turning on the Enable Motion Blur composition option at the top of the Timeline panel.

Using the motion blur option in your layer settings is the first and easiest approach to apply motion blur in After Effects. You’ll see many choices on the left and right sides of the screen after choosing a certain video. There are several techniques to motion blur a video, which we wish to accomplish. But because this guide is for novices, we will choose the simpler option. Follow the steps below to learn how to add motion blur to a video in AE:

Steps to Add Motion Blur to After Effects:

So, it goes without saying that After Effects makes it simple to access Motion Blur’s magic. You should shoot the movie at a frame rate that is faster than the average if you want the greatest slow-motion effects. How many photos are being captured each second is indicated by the frame rate.

Step1 Download and install Adobe After Effects if it isn’t already on your PC. Since Adobe After Effects is a commercial program, it is not available for free. Open the program after installation. After installation, launch it and choose “New Project” to begin editing a brand-new file. Look through the video you wish to alter.

Step2 You have a variety of settings in Adobe After Effects on the right side. Then, choose “Effects & Presets.” A search bar will appear as a result. Enter “CC Force Motion Blur” in the search field if you wish to add motion blur to the video. You may apply this effect to whatever layer you choose since your movie is made up of layers.

Step3 Next, drag the “CC Force Motion Blur” to the layers that represent your imported video at the bottom left of the screen. On the left side of the screen, under “CC Force Motion Blur,” you will find settings for motion blur. Here, you may change the motion blur to suit your needs. You may type in the values and watch the video as appropriate. There are several choices available for you to modify.

Note: Before applying any speed effects, first trim your film to the proper length. Once the speed effects have been included, you need also make sure that your composition is lengthy enough for your clip. Once you’re satisfied with the footage you want to slow down, choose one of the ways—Time warp or Time Stretch.

Step4 Customize “Shutter Angle” and “Motion Blur Samples.” Always be careful to preview the video after any modifications. Adjust to your needs and specifications. Additionally, if you wish, you may add any additional effect to the video. When finished, save the video by selecting “File” in the upper left corner.

Step5 Finally, hit the OK button and afterwards, export the project with the Motion Blur embedded inside the main video. Adobe AE also gives you flexibility to export to the desired format with the preset project settings.

Part 3. Other Video Editor to Add Effects to Videos

Due to its cost and adaptability, Adobe After Effects is quite expensive; especially for the beginners. So, we’ve a handy option, Filmora by Wondershare, that is a fantastic option since most high-end video editors are, to put it mildly, expensive. It may seem natural to just add motion blur to everything before rendering while working on a conventional 2D project in After Effects, but there are occasions when having no motion blur at all is preferable. When used properly, After Effects’ slow-motion features are extensive and reliable.

Wondershare: A video-making and editing program has its flagship product called Filmora . You may use the tools to create a wide variety of styles and appearances. Less complicated and user-friendly for beginners, the program. With the help of this program, you may edit your video at home like an expert. With this user-friendly tool and stylish effects, making excellent films doesn’t have to be difficult. When you open the app and choose Editor mode as it will walk you through each stage of the procedure.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Import Files

Media files may be easily added to the timeline in Filmora from the device’s library. .mpg,.mpeg, and many more file types are supported for this video file format’s input.

Utilize Filmstock

On Wondershare Filmora , there is a full-service shop called Filmstock that offers a ton of exciting media and after-effects for download. You may get free sound effects and short video clips to add to your videos on this website.

Edit Effect

Download films from the effect store or import them from your device and add them to your timeline in Filmora to modify your videos. Utilize the software’s drag-and-drop feature to modify the video.

Apply filters

Overlays and video filters are effects used to enhance the appeal of the video. Open the effects tab and select your desired filter to apply overlays and filters. To apply it, drag and drop it into the timeline’s video. Additionally, filters may be adjusted to change the time scale and transparency.

Export

Exporting a video to a variety of platforms comes after editing it. Filmora allows users to export video in a number of different file types, including mp4, Wmv, Mkv, ts, 3gp, f4v, Mkv, MOV, mpg, 3gp, GIF 4K, and mp3.

Conclusion

Motion blur is crucial when animating characters to move. Your videos require some blur to seem realistic when there is motion, particularly when there is quick movement. You have learnt how to include motion blur into your animation project from this guide. To add motion blur effects to your movie or animation, After Effects offers a wide variety of options. To inform you about this wonderful gesture, we utilized Filmora and Adobe After Effects and recommend Filmora for easiness and handy outputs.

Let’s start with a little introduction before learning how to apply motion blur. The visual result of an item moving while being photographed in conjunction with the shutter speed of the camera is called motion blur. When we swiftly move our heads from side to side, this effect also naturally occurs with our eyes, but we aren’t aware of it since our brains “edit” it for us. It may be startling and awkward to watch when items are moving on the screen, particularly rapid motion, without any kind of blurring effect.

Motion blur was introduced into animation to aid in the blending of frames and replicate the blurring that was seen in earlier cameras as a result of fast-moving objects. When a moving item keeps moving while light is still reaching our eyes, motion blur results. The goal of Motion Blur in After Effects is to replicate this phenomenon. After Effects will duplicate your layer several times when it changes in size or location. Then, it will offset it in various ways. This is closely related to the direction and pace of your layer’s animation.

These days, we have cameras with fast shutter speeds, which allows us to almost completely remove motion blur. Without motion blurring, each frame of your animation is like a flawless still image, making the action seem a little disorienting. Each picture captures the exact moment in time, despite the fluid motion. However, the absence of motion blur is what viewers do notice. Because of this, visual effects creators often use artificial motion blur in their effects to replicate what the viewer would experience if the element were really there in the picture.

Part 2. How to Add Motion Blur in After Effects

In videos, slow-motion may be used in a variety of ways, such as to convey the emotional context of a story or make beautiful slideshow backdrops. It doesn’t matter why you want to make a slow-motion sequence; After Effects’ slow-motion effect will work well. Click the Motion Blur layer switch to turn Motion Blur on or off. Make sure you can render out Motion Blur by turning on the Enable Motion Blur composition option at the top of the Timeline panel.

Using the motion blur option in your layer settings is the first and easiest approach to apply motion blur in After Effects. You’ll see many choices on the left and right sides of the screen after choosing a certain video. There are several techniques to motion blur a video, which we wish to accomplish. But because this guide is for novices, we will choose the simpler option. Follow the steps below to learn how to add motion blur to a video in AE:

Steps to Add Motion Blur to After Effects:

So, it goes without saying that After Effects makes it simple to access Motion Blur’s magic. You should shoot the movie at a frame rate that is faster than the average if you want the greatest slow-motion effects. How many photos are being captured each second is indicated by the frame rate.

Step1 Download and install Adobe After Effects if it isn’t already on your PC. Since Adobe After Effects is a commercial program, it is not available for free. Open the program after installation. After installation, launch it and choose “New Project” to begin editing a brand-new file. Look through the video you wish to alter.

Step2 You have a variety of settings in Adobe After Effects on the right side. Then, choose “Effects & Presets.” A search bar will appear as a result. Enter “CC Force Motion Blur” in the search field if you wish to add motion blur to the video. You may apply this effect to whatever layer you choose since your movie is made up of layers.

Step3 Next, drag the “CC Force Motion Blur” to the layers that represent your imported video at the bottom left of the screen. On the left side of the screen, under “CC Force Motion Blur,” you will find settings for motion blur. Here, you may change the motion blur to suit your needs. You may type in the values and watch the video as appropriate. There are several choices available for you to modify.

Note: Before applying any speed effects, first trim your film to the proper length. Once the speed effects have been included, you need also make sure that your composition is lengthy enough for your clip. Once you’re satisfied with the footage you want to slow down, choose one of the ways—Time warp or Time Stretch.

Step4 Customize “Shutter Angle” and “Motion Blur Samples.” Always be careful to preview the video after any modifications. Adjust to your needs and specifications. Additionally, if you wish, you may add any additional effect to the video. When finished, save the video by selecting “File” in the upper left corner.

Step5 Finally, hit the OK button and afterwards, export the project with the Motion Blur embedded inside the main video. Adobe AE also gives you flexibility to export to the desired format with the preset project settings.

Part 3. Other Video Editor to Add Effects to Videos

Due to its cost and adaptability, Adobe After Effects is quite expensive; especially for the beginners. So, we’ve a handy option, Filmora by Wondershare, that is a fantastic option since most high-end video editors are, to put it mildly, expensive. It may seem natural to just add motion blur to everything before rendering while working on a conventional 2D project in After Effects, but there are occasions when having no motion blur at all is preferable. When used properly, After Effects’ slow-motion features are extensive and reliable.

Wondershare: A video-making and editing program has its flagship product called Filmora . You may use the tools to create a wide variety of styles and appearances. Less complicated and user-friendly for beginners, the program. With the help of this program, you may edit your video at home like an expert. With this user-friendly tool and stylish effects, making excellent films doesn’t have to be difficult. When you open the app and choose Editor mode as it will walk you through each stage of the procedure.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Import Files

Media files may be easily added to the timeline in Filmora from the device’s library. .mpg,.mpeg, and many more file types are supported for this video file format’s input.

Utilize Filmstock

On Wondershare Filmora , there is a full-service shop called Filmstock that offers a ton of exciting media and after-effects for download. You may get free sound effects and short video clips to add to your videos on this website.

Edit Effect

Download films from the effect store or import them from your device and add them to your timeline in Filmora to modify your videos. Utilize the software’s drag-and-drop feature to modify the video.

Apply filters

Overlays and video filters are effects used to enhance the appeal of the video. Open the effects tab and select your desired filter to apply overlays and filters. To apply it, drag and drop it into the timeline’s video. Additionally, filters may be adjusted to change the time scale and transparency.

Export

Exporting a video to a variety of platforms comes after editing it. Filmora allows users to export video in a number of different file types, including mp4, Wmv, Mkv, ts, 3gp, f4v, Mkv, MOV, mpg, 3gp, GIF 4K, and mp3.

Conclusion

Motion blur is crucial when animating characters to move. Your videos require some blur to seem realistic when there is motion, particularly when there is quick movement. You have learnt how to include motion blur into your animation project from this guide. To add motion blur effects to your movie or animation, After Effects offers a wide variety of options. To inform you about this wonderful gesture, we utilized Filmora and Adobe After Effects and recommend Filmora for easiness and handy outputs.

Also read: