Demystifying the Vectorscope: A Comprehensive Guide for Premiere Pro Color Correction

Our eyes process colors differently. When two people look at the same picture, they may see different shades of colors. In post-production, Vectorscopes help to color grade and make sure you get your images exactly right. This means that you will process the exact color that you want across devices. Premiere Vectorscope is a great choice for anyone looking to correct and grade colors. Using Vectorscope Premiere allows you to get quantitative data about your image for a more accurate assessment of colors within the film. In this article, we explore what comprises Premiere Pro Vectorscope and how to use them in video editing.

Color Correction Editor An easy-to-use video editor helps you make color correction and color grading experience for videos!

Free Download Use Vectorscope in Filmora Try Color Correction

Part 1. Vectorscope: What is It and How to Read

Vectorscopes provide a great post-production way for color correction. It is video scope that provides greater data about the color properties of an image. Another way to look at it is that a Vectorscope is a circular graph, which monitors the following information of an image. By looking at it, you can measure saturation outward from the center while hue is measured in a circular pattern.

The Vectorscope contains markings indicating the degree of saturation and hue in an image. The distance of the markings from the center indicates how saturated the color is in your image. In simple terms, the further the markings, the more saturated the color. The two main options of Vectorscope are HLS and YUV. The HLS displays the hue, lightness, saturation, and signal information at a glance. On the other hand, the YUV mode contains several color boxes, giving accurate levels of hue and saturation.

Vectorscopes are useful to filmmakers and editors to ensure greater conformity in a film as they transition from one shot to the next. When the camera captures an image with too much saturation, using a Vectorscope helps to reduce the said saturation. This makes Vectorscope a useful feature for color correction and color grading. Color correction involves altering the colors of an image within a film to provide consistency and tone for the film. On the other hand, color grading is more like a supercharged version of color correction. It refers to altering a film so that it matches a tone or theme. Since the two, grading and correction are important, more video editing will use a combination of both.

How to Read a Vectorscope

Learning how to read a Vectorscope will make your video editing fun and easier. The best way is to view the Vectorscope in relation to the color wheel. When using Premiere Vectorscope, the colors are nicely labeled for anyone to understand. You only need to understand the primary colors of saturation and hue to accurately read a Vectorscope.

The hue color is the direction to which the marketer points. For instance, a marker pointing toward the boxes labeled “R” indicates that the hue is predominantly red. On the other hand, the saturation correlates to the length of the marker. The image is more saturated when the marker is furthest from the center of the wheel.

Keep note of the two boxes in each main color. The box that is close to the center indicates 75%, and you will normally avoid the marker extending beyond this first box. Any marketer that extends beyond this is known as non-broadcast safe or illegal colors. Although you may need to go beyond the first box in some projects for stylistic reasons, the general rule of thumb is to avoid that.

Without proper calibration, your images may end up looking too red or too blue. They will not look natural at all and will affect the overall quality of your video. Therefore, using the features within the vectorsope will help you color-grade your images to perfection.

Part 2. Vectorscope in Premiere Pro : A Brief Guide

Just like many other video editing software, Adobe Premiere Pro offers Vectorscope to help in post-production. The best way to look at Vectorscope in Premiere Pro is to use the Color Correction workspace. Once you have launched the software, Click Window, followed by Workspace, and then Color Correction. Access the reference monitor directly to deliver the program.

The reference monitor will first display composite video. Clicking on the setting icon allows you to access the panel and choose the video scope you want to use. Now, this is how you use the Vectorscope in Premiere Pro:

1. Reading a Vectorscope on Premiere Pro

A Vectorscope is similar to a color wheel. It displays colors in the same places as the wheel, with cyan to the bottom right and red to the top left. When you see a dot or line in the Vectorscope, you can tell it is giving you information about the color or chrominance of a shot. Essentially, this information is the hue (specific color) and the saturation (the strength of that hue).

As you examine the Vectorscope, you get to see how strong a particular color is by the length of the line from the center of the wheel. A longer line indicates that the color is more saturated. However, all Vectorscopes have small color targets. The Vectorscope points are lined with a drop-down used to read the scope. The default is set to 75%, which is a good limit for a typical broadcast system.

2. Adjusting Skin Tones

A commonly used feature of the Premier Pro Vectorscope is the Skin Tone Line. With this feature, you get the line on the scope between the Yellow and the Red sections at about 10.30 or 11 o’clock position.

The Vectorscope skin tone line represents the color of blood flowing through the skin. You can use this line to check the accuracy of skin tone color representation regardless of the ethnicity of the person you’re filming. In particular, video images are more accurate

The major problem is figuring out how to look at skin tones in a shot with many other colors. With the skin tons line in Premiere Pro, color correction becomes easy and quick. You only need to use a garbage matte, which is found under video effects then keying. Adjust the points so that they cover the skin of the person on the shot, then look at the Premiere Pro Vectorscope to see your end results.

Part 3. How to Use Vectorscope in Filmora : Step-by-Step Guide

The choice of video editing software can have an impact on how well you use your Vectorscopes. Wondershare Filmora is a great choice for anyone who wants to achieve great results with their videos. The versatile video editing software offers four types of video scopes, including the Vectorscope. This gives you more flexibility in video editing and achieving accurate results in color correction and grading. With the recent V13, you also get access to a range of AI features that make video editing quicker and easier.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Access Vectorscope on Filmora

Accessing Vectorscope in Filmora is straightforward. As part of the four available video scopes, Filmora has made it easy to use Vectorscope during video editing. Here is a step-by-step guide to follow:

Step 1Create a New Project on Filmora

Once you have downloaded and installed the Filmora software on your desktop, launch it and click Create a New Project.

Step 2Access Video Scopes

After starting a new project, head to the top right corner of the main interface. Click on the Video Scope button to launch the video scope bar on the preview screen.

Step 3Customize Video Scopes Layout Bar

Customizing the layout of the video scope bar allows you to have more freedom in using the feature. You have the option to choose from four layouts or expand the button to display the video scope’s name. The purpose of this step is to modify the display option of the video scopes, allowing you to have a clear view of what you are editing.

Step 4Manage the Vectorscope as Desired

On the preview screen, choose the Vectorscope option. This video scope allows you to define the skin tone indication for better color grading and correction.

Step 5Change Other Video Scopes

To achieve more accurate and better results, explore the other video scopes in the same window. View the color changes in your image through parade, histogram, and waveform video scopes. You can also change the color channels to view specific color changes across the video.

Conclusion

Vectorscopes are great for post-production color correction. Although lesser-known features to many people, they are widely used in video production. They ensure that the colors in your video are consistent across all clips or shots of your film. Since filming will often involve different shots and settings, we recommend using Wondershare Filmora for your video editing. It comes with an easy-to-use Vectorscope and other video scopes that help you achieve great results with color correction and grading.

Free Download Use Vectorscope in Filmora Try Color Correction

Part 1. Vectorscope: What is It and How to Read

Vectorscopes provide a great post-production way for color correction. It is video scope that provides greater data about the color properties of an image. Another way to look at it is that a Vectorscope is a circular graph, which monitors the following information of an image. By looking at it, you can measure saturation outward from the center while hue is measured in a circular pattern.

The Vectorscope contains markings indicating the degree of saturation and hue in an image. The distance of the markings from the center indicates how saturated the color is in your image. In simple terms, the further the markings, the more saturated the color. The two main options of Vectorscope are HLS and YUV. The HLS displays the hue, lightness, saturation, and signal information at a glance. On the other hand, the YUV mode contains several color boxes, giving accurate levels of hue and saturation.

Vectorscopes are useful to filmmakers and editors to ensure greater conformity in a film as they transition from one shot to the next. When the camera captures an image with too much saturation, using a Vectorscope helps to reduce the said saturation. This makes Vectorscope a useful feature for color correction and color grading. Color correction involves altering the colors of an image within a film to provide consistency and tone for the film. On the other hand, color grading is more like a supercharged version of color correction. It refers to altering a film so that it matches a tone or theme. Since the two, grading and correction are important, more video editing will use a combination of both.

How to Read a Vectorscope

Learning how to read a Vectorscope will make your video editing fun and easier. The best way is to view the Vectorscope in relation to the color wheel. When using Premiere Vectorscope, the colors are nicely labeled for anyone to understand. You only need to understand the primary colors of saturation and hue to accurately read a Vectorscope.

The hue color is the direction to which the marketer points. For instance, a marker pointing toward the boxes labeled “R” indicates that the hue is predominantly red. On the other hand, the saturation correlates to the length of the marker. The image is more saturated when the marker is furthest from the center of the wheel.

Keep note of the two boxes in each main color. The box that is close to the center indicates 75%, and you will normally avoid the marker extending beyond this first box. Any marketer that extends beyond this is known as non-broadcast safe or illegal colors. Although you may need to go beyond the first box in some projects for stylistic reasons, the general rule of thumb is to avoid that.

Without proper calibration, your images may end up looking too red or too blue. They will not look natural at all and will affect the overall quality of your video. Therefore, using the features within the vectorsope will help you color-grade your images to perfection.

Part 2. Vectorscope in Premiere Pro : A Brief Guide

Just like many other video editing software, Adobe Premiere Pro offers Vectorscope to help in post-production. The best way to look at Vectorscope in Premiere Pro is to use the Color Correction workspace. Once you have launched the software, Click Window, followed by Workspace, and then Color Correction. Access the reference monitor directly to deliver the program.

The reference monitor will first display composite video. Clicking on the setting icon allows you to access the panel and choose the video scope you want to use. Now, this is how you use the Vectorscope in Premiere Pro:

1. Reading a Vectorscope on Premiere Pro

A Vectorscope is similar to a color wheel. It displays colors in the same places as the wheel, with cyan to the bottom right and red to the top left. When you see a dot or line in the Vectorscope, you can tell it is giving you information about the color or chrominance of a shot. Essentially, this information is the hue (specific color) and the saturation (the strength of that hue).

As you examine the Vectorscope, you get to see how strong a particular color is by the length of the line from the center of the wheel. A longer line indicates that the color is more saturated. However, all Vectorscopes have small color targets. The Vectorscope points are lined with a drop-down used to read the scope. The default is set to 75%, which is a good limit for a typical broadcast system.

2. Adjusting Skin Tones

A commonly used feature of the Premier Pro Vectorscope is the Skin Tone Line. With this feature, you get the line on the scope between the Yellow and the Red sections at about 10.30 or 11 o’clock position.

The Vectorscope skin tone line represents the color of blood flowing through the skin. You can use this line to check the accuracy of skin tone color representation regardless of the ethnicity of the person you’re filming. In particular, video images are more accurate

The major problem is figuring out how to look at skin tones in a shot with many other colors. With the skin tons line in Premiere Pro, color correction becomes easy and quick. You only need to use a garbage matte, which is found under video effects then keying. Adjust the points so that they cover the skin of the person on the shot, then look at the Premiere Pro Vectorscope to see your end results.

Part 3. How to Use Vectorscope in Filmora : Step-by-Step Guide

The choice of video editing software can have an impact on how well you use your Vectorscopes. Wondershare Filmora is a great choice for anyone who wants to achieve great results with their videos. The versatile video editing software offers four types of video scopes, including the Vectorscope. This gives you more flexibility in video editing and achieving accurate results in color correction and grading. With the recent V13, you also get access to a range of AI features that make video editing quicker and easier.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Access Vectorscope on Filmora

Accessing Vectorscope in Filmora is straightforward. As part of the four available video scopes, Filmora has made it easy to use Vectorscope during video editing. Here is a step-by-step guide to follow:

Step 1Create a New Project on Filmora

Once you have downloaded and installed the Filmora software on your desktop, launch it and click Create a New Project.

Step 2Access Video Scopes

After starting a new project, head to the top right corner of the main interface. Click on the Video Scope button to launch the video scope bar on the preview screen.

Step 3Customize Video Scopes Layout Bar

Customizing the layout of the video scope bar allows you to have more freedom in using the feature. You have the option to choose from four layouts or expand the button to display the video scope’s name. The purpose of this step is to modify the display option of the video scopes, allowing you to have a clear view of what you are editing.

Step 4Manage the Vectorscope as Desired

On the preview screen, choose the Vectorscope option. This video scope allows you to define the skin tone indication for better color grading and correction.

Step 5Change Other Video Scopes

To achieve more accurate and better results, explore the other video scopes in the same window. View the color changes in your image through parade, histogram, and waveform video scopes. You can also change the color channels to view specific color changes across the video.

Conclusion

Vectorscopes are great for post-production color correction. Although lesser-known features to many people, they are widely used in video production. They ensure that the colors in your video are consistent across all clips or shots of your film. Since filming will often involve different shots and settings, we recommend using Wondershare Filmora for your video editing. It comes with an easy-to-use Vectorscope and other video scopes that help you achieve great results with color correction and grading.

Do You Want to Print Designs Onto Your Garments or Other Fashion Accessories? Find Out How to Create a Screen Print Effect in Photoshop to Give Your Text or Graphics a Vintage or Retro Look

Screen printing is a unique method that uses a mesh to transfer ink onto a surface and is commonly used to print designs onto t-shirts or other garments, such as hoodies, tote bags, and even sneakers.

Nowadays, digital means such as Photoshop or Illustrator are used to create the screen print effect, which is achieved by using a layer mask to cut out a portion of the image and filling it with the color or pattern of your choice. The design is then printed onto fabric using water-based CMYK (cyan, magenta, yellow, black) inks with inkjet printers.

Suppose you’ve ever wanted to create the screen print effect in Photoshop to give that artistic look to your pictures and embed them in your clothes or other accessories but don’t know where to start or are not familiar with the process. In that case, this guide can surely help you figure this out quickly!

So without any delay, let’s get on with it!

How To Use Photoshop To Create The Print Effect

Below we’ve provided a detailed guide using Adobe Photoshop to create the print effect with easy step-by-step instructions.

What Are The Requirements For Creating the Print Effect In PhotoShop?

Before we discuss the complete process of creating the print effect while using Photoshop, here are the resources you have to arrange.

• Picture of the object: We will cut out the object from the original image using the Lasso tool and unsaturate it. However, you have to ensure that the object is clear and easily detectable within the picture.
• A background image: You will need a background image to add the object to. For this, you can use a solid background, capture scenery, etc.
• Fonts: You can also add fonts to the final image to add your ideas or thoughts, making your final project more eye-catching and engaging.
• Photoshop latest version: For this tutorial, we will use the Photoshop CC 2021 version, so make sure to download and install it to your computer immediately!

What Are The Steps To Create Print Effect in PhotoShop?

Now that you know the necessary resources, the following are the steps to create the print effect in Photoshop:

Step1 Launch thePhotoshop program on your laptop/desktop and click “Create New” on the software dashboard. Next, select the page size, such as “letter,” and click “Open.”

Now, click the “File” option in the top toolbar, and from the drop-down menu, select “Open.” Next, choose the image you want to apply the screen print effect by browsing to its location on your computer.

Step2 Next, click the “Lasso” tool from the left-side menu to create the selection around the object in the image.

Press the CMD/Ctrl + C on your computer’s keyboard to copy the selection. Next, click the “Layer“ option in the top toolbar, select “New,” and click “Layer via Copy.”

Step3 Now, hide the background layer in the “Layers” panel on the right-hand side, and you will get your object without any BG. Click the “Image” option in the top toolbar and select “Adjustments.”

Click “Threshold…” from the drop-down menu, and set the “Threshold level.” Alternatively, you can click “Cmd/ctrl+Shift+U” on the keyboard to desaturate the image.

Step4 Next, select the “Magic Eraser Tool” from the left-side menu and remove the white parts to smooth down the background. Afterward, choose the “Move Tool” from the menu and drag your object to a new layer.

To add the background image, click “File” and select “Open.” Next, select the file and again click “Open.”

Step5 Select the object using the “Move Tool” and drag it to the background image layer. If the thing is too large and you want to resize it, select the object using the “CMD/Ctrl” key and click “Edit” from the top toolbar. From the drop-down menu, choose “Transform” and click “Scale.”

Next, drag the handles to adjust the size of the object on the Background image.

Step6 Click the “T” icon from the left-hand side menu and set the font style, color, and size. You can also click the “3D” option to convert your text to a three-dimensional form.

Try removing the left-out white patches on the object using the “Magic Eraser Tool” to give a polished look to the print screen effect. Once you are satisfied, click the “File” option from the top toolbar panel and select “Save As.”

Type in the file name and select the file type from the drop-down menu next to “Save As Type.” Choose the storage location, click “Save” to export your final project, and you’re done!

Conclusion

In this article, we’ve explored what the screen print effect is and how it is used in digital art. We’ve also discussed the requirements and resources you need to use and then demonstrated a step-by-step process of how to create the screen print effect in Photoshop with simple and easy-to-follow instructions.

To make things easy for you, we also added original screenshots while creating a sample project on the software.

Hopefully, this article helped resolve your queries, and you can now give a vintage or retro look to your images using the screen print effect in Photoshop.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

How to Rotate Video in iMovie [with Alternative]

Are you wondering how to change the orientation of videos in iMovie? You’re not alone. With iMovie as a professional video editing suite, it is no surprise to see iOS, iPad OS, and Mac OS users wanting to learn how to create cinematic and breathtaking videos using iMovie. iMovie allows its users to import clips, add effects, customize music, employ filters and motion elements, and lots more.

There are many ways of being creative during movie production. iMovie editors are exploring fast forward and slow-motion effects to changing backgrounds and flipping clips over. Depending on what you would like to achieve, you may flip your video clips to make them appear better or give them another outlook. You can decide to change orientation in iMovie. To change video orientation in iMovie requires that you know how to use the software. You can vertically or horizontally flip a clip and rotate it left or right in iMovie.

In this article

01 What is Rotating Video and Why

02 Detailed Steps to Rotate Video in iMovie

03 Rotate Video - iMovie Alternative

Part 1: What is Rotating Video and Why

Rotating a video means changing its orientation. A video clip can turn in a clockwise or counterclockwise direction, in 90° increments. Different video-making and editing software or applications have other steps to carry out this process. However, the result is the same for all, a change in the orientation of the video.

People rotate video clips for a variety of reasons. Here are some reasons as to why you may want to change video orientation in iMovie:

• Video stylization: While a rotated video may look disoriented, editors sometimes use the technique to convey a particular mood or emotion.
• Continuity: Video clip rotation can help you correct production errors or last-minute effect changes.
• Correct disorientation: Sometimes, as a result of errors while shooting, especially when using a mobile device, some video clips may appear in a lateral direction; video rotation can help fix this.
• Create horizontal videos: With a change in video orientation, you can make some footage like backgrounds appear vertically or horizontally.

Now that you know what video rotation is and some of the reasons people choose to change a video’s orientation, let’s now dive right into rotating videos in iMovie. And move ahead to lead from other video editors with this change orientation of video in iMovie technique going to discuss below.

Part 2: Detailed Steps to Rotate Video in iMovie

Appropriate video orientation is the requirement of every video creation project. If video orientation is not as needed, either the one created in iMovie or already existing video. Then, the need arises to look around ways to assist in performing the iMovie change orientation task effectively. This part of the article will specifically explain how to change the orientation of video in iMovie with all the necessary steps.

Before adding a clip or photo to your movie, you can decide to change its orientation. The following steps would show how to change video orientation in iMovie:

Step 1： Launch iMovie

On your Mac, launch iMovie > From the browser or timeline, select the photo or video clip to be rotated.

Step 2： Click on the Crop icon

Click the cropping icon to reveal the cropping options/controls.

Step 3：Rotate Video

On the right portion of the cropping controls, click Rotate Clockwise to rotate the clip or photo in a clockwise direction. Otherwise, click Rotates Counterclockwise to rotate the clip or image counterclockwise.

Step 4：Apply Changes

In the cropping controls, click Apply to effect the changes.

If you wish to remove the rotation, click the reset button at the top right-hand corner of your screen.

Now, as you know the steps to change video orientation in iMovie, simply move ahead of your video creation and editing process with iMovie and enjoy the wonderful experience of creating something new, engaging, and innovative in the world of video making. Not only this step guide will be going to assist you, but there are some more alternative ways also that you can give a try to enhance your overall experience in the area of the video content editing process. For that, you don’t need to go anywhere. Right here, you will have that vast area of information.

Part 3: Rotate Video - iMovie Alternative

Are you looking for some other software to rotate your Video with? Wondershare Filmora is your sure plug! This easy-to-use yet professional video editing software turns videos and add titles, add text, perform color grading, add multiple overlays, do motion tracking, use stickers and animations, and, what is more, purchase the software at an affordable price. With this software, you can comment and play your video clips to not have to worry about doing this now and then.

Try It Free

Try It Free

To rotate MPEG and MPG videos using Wondershare Filmora, follow these simple steps:

Step 1： Import the MP4 files to be rotated

Drag and drop the clip to be rotated on the primary window or click Import to browse your files.

Step 2： Rotate the MP4 clips

Now, from the User’s Album, drag the MP4 file to be rotated to the video track on the timeline. Double click the MP4 video thumbnail to reveal the Rotate options, allowing you to rotate your video in one click. There are four rotation related options in Wondershare Filmora:

• Rotate the clip 90° in a clockwise direction and continuously. This way, you can rotate the clip 90°, 180°, and 270°.
• Rotate the clip 90° in an anticlockwise direction and constantly.
• Flip the Video horizontally in an upside-down fashion.
• Flip the Video vertically left to right.

Step 3： Export the rotated video clip

To permanently save the changes made, click the Create button to reveal four options: YouTube, DVD, Format, and Device. Select the right format/device and click Create to output your rotated video clip.

You have sufficient equipment to start your voyage to creation and innovation by now. No doubt, Filmora comes here as a rescue and an alternative solution to let you change video orientation and a provider of many editing options. So without any concern, you can explore the tool at any time as per your availability and requirement.

Conclusion

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Through this article, you learnt how to change orientation in iMovie, and thus nothing is holding your creativity back! With iMovie change orientation, you can now flip video clips in different directions to suit your preference. You now also know that with Wondershare Filmora, you can achieve just about the same result as you would if you were using iMovie for video rotation. So, now you have two robust tools to perform your task. Just keep going and let rock the world with your fantastic creativity and efforts.

02 Detailed Steps to Rotate Video in iMovie

03 Rotate Video - iMovie Alternative

Part 1: What is Rotating Video and Why

Rotating a video means changing its orientation. A video clip can turn in a clockwise or counterclockwise direction, in 90° increments. Different video-making and editing software or applications have other steps to carry out this process. However, the result is the same for all, a change in the orientation of the video.

People rotate video clips for a variety of reasons. Here are some reasons as to why you may want to change video orientation in iMovie:

• Video stylization: While a rotated video may look disoriented, editors sometimes use the technique to convey a particular mood or emotion.
• Continuity: Video clip rotation can help you correct production errors or last-minute effect changes.
• Correct disorientation: Sometimes, as a result of errors while shooting, especially when using a mobile device, some video clips may appear in a lateral direction; video rotation can help fix this.
• Create horizontal videos: With a change in video orientation, you can make some footage like backgrounds appear vertically or horizontally.

Now that you know what video rotation is and some of the reasons people choose to change a video’s orientation, let’s now dive right into rotating videos in iMovie. And move ahead to lead from other video editors with this change orientation of video in iMovie technique going to discuss below.

Part 2: Detailed Steps to Rotate Video in iMovie

Appropriate video orientation is the requirement of every video creation project. If video orientation is not as needed, either the one created in iMovie or already existing video. Then, the need arises to look around ways to assist in performing the iMovie change orientation task effectively. This part of the article will specifically explain how to change the orientation of video in iMovie with all the necessary steps.

Before adding a clip or photo to your movie, you can decide to change its orientation. The following steps would show how to change video orientation in iMovie:

Step 1： Launch iMovie

On your Mac, launch iMovie > From the browser or timeline, select the photo or video clip to be rotated.

Step 2： Click on the Crop icon

Click the cropping icon to reveal the cropping options/controls.

Step 3：Rotate Video

On the right portion of the cropping controls, click Rotate Clockwise to rotate the clip or photo in a clockwise direction. Otherwise, click Rotates Counterclockwise to rotate the clip or image counterclockwise.

Step 4：Apply Changes

In the cropping controls, click Apply to effect the changes.

If you wish to remove the rotation, click the reset button at the top right-hand corner of your screen.

Now, as you know the steps to change video orientation in iMovie, simply move ahead of your video creation and editing process with iMovie and enjoy the wonderful experience of creating something new, engaging, and innovative in the world of video making. Not only this step guide will be going to assist you, but there are some more alternative ways also that you can give a try to enhance your overall experience in the area of the video content editing process. For that, you don’t need to go anywhere. Right here, you will have that vast area of information.

Part 3: Rotate Video - iMovie Alternative

Are you looking for some other software to rotate your Video with? Wondershare Filmora is your sure plug! This easy-to-use yet professional video editing software turns videos and add titles, add text, perform color grading, add multiple overlays, do motion tracking, use stickers and animations, and, what is more, purchase the software at an affordable price. With this software, you can comment and play your video clips to not have to worry about doing this now and then.

Try It Free

Try It Free

To rotate MPEG and MPG videos using Wondershare Filmora, follow these simple steps:

Step 1： Import the MP4 files to be rotated

Drag and drop the clip to be rotated on the primary window or click Import to browse your files.

Step 2： Rotate the MP4 clips

Now, from the User’s Album, drag the MP4 file to be rotated to the video track on the timeline. Double click the MP4 video thumbnail to reveal the Rotate options, allowing you to rotate your video in one click. There are four rotation related options in Wondershare Filmora:

• Rotate the clip 90° in a clockwise direction and continuously. This way, you can rotate the clip 90°, 180°, and 270°.
• Rotate the clip 90° in an anticlockwise direction and constantly.
• Flip the Video horizontally in an upside-down fashion.
• Flip the Video vertically left to right.

Step 3： Export the rotated video clip

To permanently save the changes made, click the Create button to reveal four options: YouTube, DVD, Format, and Device. Select the right format/device and click Create to output your rotated video clip.

You have sufficient equipment to start your voyage to creation and innovation by now. No doubt, Filmora comes here as a rescue and an alternative solution to let you change video orientation and a provider of many editing options. So without any concern, you can explore the tool at any time as per your availability and requirement.

Conclusion

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Through this article, you learnt how to change orientation in iMovie, and thus nothing is holding your creativity back! With iMovie change orientation, you can now flip video clips in different directions to suit your preference. You now also know that with Wondershare Filmora, you can achieve just about the same result as you would if you were using iMovie for video rotation. So, now you have two robust tools to perform your task. Just keep going and let rock the world with your fantastic creativity and efforts.

02 Detailed Steps to Rotate Video in iMovie

03 Rotate Video - iMovie Alternative

Part 1: What is Rotating Video and Why

Rotating a video means changing its orientation. A video clip can turn in a clockwise or counterclockwise direction, in 90° increments. Different video-making and editing software or applications have other steps to carry out this process. However, the result is the same for all, a change in the orientation of the video.

People rotate video clips for a variety of reasons. Here are some reasons as to why you may want to change video orientation in iMovie:

• Video stylization: While a rotated video may look disoriented, editors sometimes use the technique to convey a particular mood or emotion.
• Continuity: Video clip rotation can help you correct production errors or last-minute effect changes.
• Correct disorientation: Sometimes, as a result of errors while shooting, especially when using a mobile device, some video clips may appear in a lateral direction; video rotation can help fix this.
• Create horizontal videos: With a change in video orientation, you can make some footage like backgrounds appear vertically or horizontally.

Now that you know what video rotation is and some of the reasons people choose to change a video’s orientation, let’s now dive right into rotating videos in iMovie. And move ahead to lead from other video editors with this change orientation of video in iMovie technique going to discuss below.

Part 2: Detailed Steps to Rotate Video in iMovie

Appropriate video orientation is the requirement of every video creation project. If video orientation is not as needed, either the one created in iMovie or already existing video. Then, the need arises to look around ways to assist in performing the iMovie change orientation task effectively. This part of the article will specifically explain how to change the orientation of video in iMovie with all the necessary steps.

Before adding a clip or photo to your movie, you can decide to change its orientation. The following steps would show how to change video orientation in iMovie:

Step 1： Launch iMovie

On your Mac, launch iMovie > From the browser or timeline, select the photo or video clip to be rotated.

Step 2： Click on the Crop icon

Click the cropping icon to reveal the cropping options/controls.

Step 3：Rotate Video

On the right portion of the cropping controls, click Rotate Clockwise to rotate the clip or photo in a clockwise direction. Otherwise, click Rotates Counterclockwise to rotate the clip or image counterclockwise.

Step 4：Apply Changes

In the cropping controls, click Apply to effect the changes.

If you wish to remove the rotation, click the reset button at the top right-hand corner of your screen.

Now, as you know the steps to change video orientation in iMovie, simply move ahead of your video creation and editing process with iMovie and enjoy the wonderful experience of creating something new, engaging, and innovative in the world of video making. Not only this step guide will be going to assist you, but there are some more alternative ways also that you can give a try to enhance your overall experience in the area of the video content editing process. For that, you don’t need to go anywhere. Right here, you will have that vast area of information.

Part 3: Rotate Video - iMovie Alternative

Are you looking for some other software to rotate your Video with? Wondershare Filmora is your sure plug! This easy-to-use yet professional video editing software turns videos and add titles, add text, perform color grading, add multiple overlays, do motion tracking, use stickers and animations, and, what is more, purchase the software at an affordable price. With this software, you can comment and play your video clips to not have to worry about doing this now and then.

Try It Free

Try It Free

To rotate MPEG and MPG videos using Wondershare Filmora, follow these simple steps:

Step 1： Import the MP4 files to be rotated

Drag and drop the clip to be rotated on the primary window or click Import to browse your files.

Step 2： Rotate the MP4 clips

Now, from the User’s Album, drag the MP4 file to be rotated to the video track on the timeline. Double click the MP4 video thumbnail to reveal the Rotate options, allowing you to rotate your video in one click. There are four rotation related options in Wondershare Filmora:

• Rotate the clip 90° in a clockwise direction and continuously. This way, you can rotate the clip 90°, 180°, and 270°.
• Rotate the clip 90° in an anticlockwise direction and constantly.
• Flip the Video horizontally in an upside-down fashion.
• Flip the Video vertically left to right.

Step 3： Export the rotated video clip

To permanently save the changes made, click the Create button to reveal four options: YouTube, DVD, Format, and Device. Select the right format/device and click Create to output your rotated video clip.

You have sufficient equipment to start your voyage to creation and innovation by now. No doubt, Filmora comes here as a rescue and an alternative solution to let you change video orientation and a provider of many editing options. So without any concern, you can explore the tool at any time as per your availability and requirement.

Conclusion

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Through this article, you learnt how to change orientation in iMovie, and thus nothing is holding your creativity back! With iMovie change orientation, you can now flip video clips in different directions to suit your preference. You now also know that with Wondershare Filmora, you can achieve just about the same result as you would if you were using iMovie for video rotation. So, now you have two robust tools to perform your task. Just keep going and let rock the world with your fantastic creativity and efforts.

02 Detailed Steps to Rotate Video in iMovie

03 Rotate Video - iMovie Alternative

Part 1: What is Rotating Video and Why

Rotating a video means changing its orientation. A video clip can turn in a clockwise or counterclockwise direction, in 90° increments. Different video-making and editing software or applications have other steps to carry out this process. However, the result is the same for all, a change in the orientation of the video.

People rotate video clips for a variety of reasons. Here are some reasons as to why you may want to change video orientation in iMovie:

• Video stylization: While a rotated video may look disoriented, editors sometimes use the technique to convey a particular mood or emotion.
• Continuity: Video clip rotation can help you correct production errors or last-minute effect changes.
• Correct disorientation: Sometimes, as a result of errors while shooting, especially when using a mobile device, some video clips may appear in a lateral direction; video rotation can help fix this.
• Create horizontal videos: With a change in video orientation, you can make some footage like backgrounds appear vertically or horizontally.

Now that you know what video rotation is and some of the reasons people choose to change a video’s orientation, let’s now dive right into rotating videos in iMovie. And move ahead to lead from other video editors with this change orientation of video in iMovie technique going to discuss below.

Part 2: Detailed Steps to Rotate Video in iMovie

Appropriate video orientation is the requirement of every video creation project. If video orientation is not as needed, either the one created in iMovie or already existing video. Then, the need arises to look around ways to assist in performing the iMovie change orientation task effectively. This part of the article will specifically explain how to change the orientation of video in iMovie with all the necessary steps.

Before adding a clip or photo to your movie, you can decide to change its orientation. The following steps would show how to change video orientation in iMovie:

Step 1： Launch iMovie

On your Mac, launch iMovie > From the browser or timeline, select the photo or video clip to be rotated.

Step 2： Click on the Crop icon

Click the cropping icon to reveal the cropping options/controls.

Step 3：Rotate Video

On the right portion of the cropping controls, click Rotate Clockwise to rotate the clip or photo in a clockwise direction. Otherwise, click Rotates Counterclockwise to rotate the clip or image counterclockwise.

Step 4：Apply Changes

In the cropping controls, click Apply to effect the changes.

If you wish to remove the rotation, click the reset button at the top right-hand corner of your screen.

Now, as you know the steps to change video orientation in iMovie, simply move ahead of your video creation and editing process with iMovie and enjoy the wonderful experience of creating something new, engaging, and innovative in the world of video making. Not only this step guide will be going to assist you, but there are some more alternative ways also that you can give a try to enhance your overall experience in the area of the video content editing process. For that, you don’t need to go anywhere. Right here, you will have that vast area of information.

Part 3: Rotate Video - iMovie Alternative

Are you looking for some other software to rotate your Video with? Wondershare Filmora is your sure plug! This easy-to-use yet professional video editing software turns videos and add titles, add text, perform color grading, add multiple overlays, do motion tracking, use stickers and animations, and, what is more, purchase the software at an affordable price. With this software, you can comment and play your video clips to not have to worry about doing this now and then.

Try It Free

Try It Free

To rotate MPEG and MPG videos using Wondershare Filmora, follow these simple steps:

Step 1： Import the MP4 files to be rotated

Drag and drop the clip to be rotated on the primary window or click Import to browse your files.

Step 2： Rotate the MP4 clips

Now, from the User’s Album, drag the MP4 file to be rotated to the video track on the timeline. Double click the MP4 video thumbnail to reveal the Rotate options, allowing you to rotate your video in one click. There are four rotation related options in Wondershare Filmora:

• Rotate the clip 90° in a clockwise direction and continuously. This way, you can rotate the clip 90°, 180°, and 270°.
• Rotate the clip 90° in an anticlockwise direction and constantly.
• Flip the Video horizontally in an upside-down fashion.
• Flip the Video vertically left to right.

Step 3： Export the rotated video clip

To permanently save the changes made, click the Create button to reveal four options: YouTube, DVD, Format, and Device. Select the right format/device and click Create to output your rotated video clip.

You have sufficient equipment to start your voyage to creation and innovation by now. No doubt, Filmora comes here as a rescue and an alternative solution to let you change video orientation and a provider of many editing options. So without any concern, you can explore the tool at any time as per your availability and requirement.

Conclusion

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Through this article, you learnt how to change orientation in iMovie, and thus nothing is holding your creativity back! With iMovie change orientation, you can now flip video clips in different directions to suit your preference. You now also know that with Wondershare Filmora, you can achieve just about the same result as you would if you were using iMovie for video rotation. So, now you have two robust tools to perform your task. Just keep going and let rock the world with your fantastic creativity and efforts.

Detailed Steps to Add Border to Video Using Premiere Pro

The border is really important as it frames up all the video. It makes the video eye-catching and gives a vivid effect. It also fixes the automated cropping issues, especially on Instagram. Along with this, it helps the viewers to watch the video as you can add effects about fun, travel, guides and etc. accordingly. Adding a border is super easy and it’s not more than fun!

So let’s start…

How to Add Borders to Videos in Premiere Pro

Today we are going to discuss how to add borders to the video clips or images in premiere pro. It’s pretty simple to make borders of different colors and sizes for your video clips.

So, here are the two different ways we can use to add borders to our videos or images.

1. Adding a border to the video using a grid effect
2. Adding a border to the video using the essential graphics panel

Way 1. Using a Grid Effect

While working on the project, make sure the aspect ratio of the video is 16:9, and project settings are HD (1080P) and UHD 4K in premiere pro.

Let’s start step by step.

• Drag all the video clips by stacking them on video tracks in the timeline.

• Hit the Effects tab and write the grid in the search panel.

• Simply drag the grid option into the timeline of the videos.

• Select the anchor value to 0 for the x and y.

• Change the size to width and height slider.

• Change the width to 1920 and height to 1080.

Now we have borders added as you can see below.

You can also change the width of the borders.

• Change the width to 30.

You have the option to change the color of the border.

• Select the blending mode to normal.
• Select the color picker tool and change the color of your desire.

Way 2. Using the Essential Graphics Panel

First of all, you wanna be in your premium pro graphics workspace. This will pull off your graphics panel on your right. The good thing about the essential graphics panel is, that it is vector-based. So the different video clips with different resolutions will not pixelate.

Let’s dive in…

Now, to use the graphics panel you need to perform the following steps.

• Import the videos and drag them into the timeline.

• Select the effects

• Find “alpha adjust” and drag it into the effects control.

• Create a 4-point polygon mask.

A rectangular mask will be created. You can edit it according to the frame requirement.

• Go to the corner of the mask border and press the shift key. Drag the border to resize and scale it proportionally.

• Again go to effect controls, under opacity hit invert alpha.

• Under mask hit inverted.

• Go to motion settings, change the position, and

• Go to Alpha adjust and set the mask feathering to 0.

• Now go back to the effects panel and search the paint bucket.

• Under effects controls, hit the alpha channel under the fill selector

• Then hit stroke under the stroke

• You can turn up the stroke width to make it a bit thicker.

• Hit the color tab to change the color of the border as desired.

An Easier Way to Add Borders to Videos on Computer

Filmora Video Editor is one of the best and most efficient video editing applications. It is not only very easy to use but it provides a professional interface for users to make the videos stand out. It can be used for both Windows and Mac.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Let’s learn three different ways to add borders to the video/image using Wondershare Filmora 11.

1. Using the Borders Preset
2. Using overlay preset
3. Using Human Border

1. Using the Borders Preset

• Download Wonder Share Filmora 11 on your device.
• Open the software and hit the import media under the media
• Select the desired media from the storage of your device.
• Drag and drop the selected video/image into the timeline.

• Select the effects tab and hit the utility
• You can search the borders in the search engine and use a border of your choice given in the panel.
• Select the border and hit the + button on the bottom right corner of the border.
• You can drag and drop the border into the timeline.
• You can see the border below.

• You can edit the border by double-clicking the border layer or directly clicking on the border in the preview area.
• The Effects controls will be opened.
• You can change the size, color and opacity of the border, by moving the slider.
• Hit OK

2. Using overlay preset

• Select the video/image layer and hit the effects
• Select overlay from the panel on the left side by scrolling down.
• You can choose the overlay of your choice by clicking on the + tab or simply dragging and dropping it into the timeline.

• Double click on the image/video with overlay effect.
• Select the effects tab under the image
• You can adjust the shadow of overlay by moving the slider of opacity.
• Hit Ok

3. Using Human Border

• Select the video/image and hit the effects
• Select AI Portrait from the panel.
• Select the desired human border.
• Hit the + tab or you can drag and drop into the timeline.

• Double-click on the human border layer, expand the human border controls panel under the effects
• You can change the color, size, thickness, opacity, etc.
• Hit Ok

How to Add a Border to the Video Online

You can also add borders to your videos/images online. All you need is, have a good internet connection and a browser.

Here is a guide for you to add frames to your video online.

Using Kapwing

• Open the browser and write the “Kapwing video maker”.
• You need to sign in the Kapwing to make an account
• An editing interphase will be opened as below.
• Hit on media and import media by clicking on +
• Drag and drop the video into the timeline.

1st Method

• Double click on the video in the preview window.
• 4 dots will appear on the corner of the video.
• You can drag the blue dots to make a frame and resize the image/video.
• Hit on lock ratio tab to maintain the pixels of the video.

• Double-click on the border area.
• You can change the color of the border.
• You can also resize the length and width of the border.

2nd Method

• Hit the elements and select the frames from the panel.

Here you can take square frames, circle frames, shapes, emoji’s and a lot of more frames.

3rd Method

• Hit the videos
• Select templates, a list of templates will be shown in this panel.
• Select the desired template and drag it into the timeline.

Conclusion

We have discussed different software to add borders. All the software and tools are free to use. Similarly, they can be used on both Mac as well as Windows. They are user-friendly and provide full control over borders. You can use any one of them to make your borders and can easily engage viewers in your videos.

In all of the above applications, I recommend you to use Wondershare filmora 11. It is the most professional software and makes your video stand out.

Way 1. Using a Grid Effect

While working on the project, make sure the aspect ratio of the video is 16:9, and project settings are HD (1080P) and UHD 4K in premiere pro.

Let’s start step by step.

• Drag all the video clips by stacking them on video tracks in the timeline.

• Hit the Effects tab and write the grid in the search panel.

• Simply drag the grid option into the timeline of the videos.

• Select the anchor value to 0 for the x and y.

• Change the size to width and height slider.

• Change the width to 1920 and height to 1080.

Now we have borders added as you can see below.

You can also change the width of the borders.

• Change the width to 30.

You have the option to change the color of the border.

• Select the blending mode to normal.
• Select the color picker tool and change the color of your desire.

Way 2. Using the Essential Graphics Panel

First of all, you wanna be in your premium pro graphics workspace. This will pull off your graphics panel on your right. The good thing about the essential graphics panel is, that it is vector-based. So the different video clips with different resolutions will not pixelate.

Let’s dive in…

Now, to use the graphics panel you need to perform the following steps.

• Import the videos and drag them into the timeline.

• Select the effects

• Find “alpha adjust” and drag it into the effects control.

• Create a 4-point polygon mask.

A rectangular mask will be created. You can edit it according to the frame requirement.

• Go to the corner of the mask border and press the shift key. Drag the border to resize and scale it proportionally.

• Again go to effect controls, under opacity hit invert alpha.

• Under mask hit inverted.

• Go to motion settings, change the position, and

• Go to Alpha adjust and set the mask feathering to 0.

• Now go back to the effects panel and search the paint bucket.

• Under effects controls, hit the alpha channel under the fill selector

• Then hit stroke under the stroke

• You can turn up the stroke width to make it a bit thicker.

• Hit the color tab to change the color of the border as desired.

An Easier Way to Add Borders to Videos on Computer

Filmora Video Editor is one of the best and most efficient video editing applications. It is not only very easy to use but it provides a professional interface for users to make the videos stand out. It can be used for both Windows and Mac.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Let’s learn three different ways to add borders to the video/image using Wondershare Filmora 11.

1. Using the Borders Preset
2. Using overlay preset
3. Using Human Border

1. Using the Borders Preset

• Download Wonder Share Filmora 11 on your device.
• Open the software and hit the import media under the media
• Select the desired media from the storage of your device.
• Drag and drop the selected video/image into the timeline.

• Select the effects tab and hit the utility
• You can search the borders in the search engine and use a border of your choice given in the panel.
• Select the border and hit the + button on the bottom right corner of the border.
• You can drag and drop the border into the timeline.
• You can see the border below.

• You can edit the border by double-clicking the border layer or directly clicking on the border in the preview area.
• The Effects controls will be opened.
• You can change the size, color and opacity of the border, by moving the slider.
• Hit OK

2. Using overlay preset

• Select the video/image layer and hit the effects
• Select overlay from the panel on the left side by scrolling down.
• You can choose the overlay of your choice by clicking on the + tab or simply dragging and dropping it into the timeline.

• Double click on the image/video with overlay effect.
• Select the effects tab under the image
• You can adjust the shadow of overlay by moving the slider of opacity.
• Hit Ok

3. Using Human Border

• Select the video/image and hit the effects
• Select AI Portrait from the panel.
• Select the desired human border.
• Hit the + tab or you can drag and drop into the timeline.

• Double-click on the human border layer, expand the human border controls panel under the effects
• You can change the color, size, thickness, opacity, etc.
• Hit Ok

How to Add a Border to the Video Online

You can also add borders to your videos/images online. All you need is, have a good internet connection and a browser.

Here is a guide for you to add frames to your video online.

Using Kapwing

• Open the browser and write the “Kapwing video maker”.
• You need to sign in the Kapwing to make an account
• An editing interphase will be opened as below.
• Hit on media and import media by clicking on +
• Drag and drop the video into the timeline.

1st Method

• Double click on the video in the preview window.
• 4 dots will appear on the corner of the video.
• You can drag the blue dots to make a frame and resize the image/video.
• Hit on lock ratio tab to maintain the pixels of the video.

• Double-click on the border area.
• You can change the color of the border.
• You can also resize the length and width of the border.

2nd Method

• Hit the elements and select the frames from the panel.

Here you can take square frames, circle frames, shapes, emoji’s and a lot of more frames.

3rd Method

• Hit the videos
• Select templates, a list of templates will be shown in this panel.
• Select the desired template and drag it into the timeline.

Conclusion

We have discussed different software to add borders. All the software and tools are free to use. Similarly, they can be used on both Mac as well as Windows. They are user-friendly and provide full control over borders. You can use any one of them to make your borders and can easily engage viewers in your videos.

In all of the above applications, I recommend you to use Wondershare filmora 11. It is the most professional software and makes your video stand out.

Way 1. Using a Grid Effect

While working on the project, make sure the aspect ratio of the video is 16:9, and project settings are HD (1080P) and UHD 4K in premiere pro.

Let’s start step by step.

• Drag all the video clips by stacking them on video tracks in the timeline.

• Hit the Effects tab and write the grid in the search panel.

• Simply drag the grid option into the timeline of the videos.

• Select the anchor value to 0 for the x and y.

• Change the size to width and height slider.

• Change the width to 1920 and height to 1080.

Now we have borders added as you can see below.

You can also change the width of the borders.

• Change the width to 30.

You have the option to change the color of the border.

• Select the blending mode to normal.
• Select the color picker tool and change the color of your desire.

Way 2. Using the Essential Graphics Panel

First of all, you wanna be in your premium pro graphics workspace. This will pull off your graphics panel on your right. The good thing about the essential graphics panel is, that it is vector-based. So the different video clips with different resolutions will not pixelate.

Let’s dive in…

Now, to use the graphics panel you need to perform the following steps.

• Import the videos and drag them into the timeline.

• Select the effects

• Find “alpha adjust” and drag it into the effects control.

• Create a 4-point polygon mask.

A rectangular mask will be created. You can edit it according to the frame requirement.

• Go to the corner of the mask border and press the shift key. Drag the border to resize and scale it proportionally.

• Again go to effect controls, under opacity hit invert alpha.

• Under mask hit inverted.

• Go to motion settings, change the position, and

• Go to Alpha adjust and set the mask feathering to 0.

• Now go back to the effects panel and search the paint bucket.

• Under effects controls, hit the alpha channel under the fill selector

• Then hit stroke under the stroke

• You can turn up the stroke width to make it a bit thicker.

• Hit the color tab to change the color of the border as desired.

An Easier Way to Add Borders to Videos on Computer

Filmora Video Editor is one of the best and most efficient video editing applications. It is not only very easy to use but it provides a professional interface for users to make the videos stand out. It can be used for both Windows and Mac.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Let’s learn three different ways to add borders to the video/image using Wondershare Filmora 11.

1. Using the Borders Preset
2. Using overlay preset
3. Using Human Border

1. Using the Borders Preset

• Download Wonder Share Filmora 11 on your device.
• Open the software and hit the import media under the media
• Select the desired media from the storage of your device.
• Drag and drop the selected video/image into the timeline.

• Select the effects tab and hit the utility
• You can search the borders in the search engine and use a border of your choice given in the panel.
• Select the border and hit the + button on the bottom right corner of the border.
• You can drag and drop the border into the timeline.
• You can see the border below.

• You can edit the border by double-clicking the border layer or directly clicking on the border in the preview area.
• The Effects controls will be opened.
• You can change the size, color and opacity of the border, by moving the slider.
• Hit OK

2. Using overlay preset

• Select the video/image layer and hit the effects
• Select overlay from the panel on the left side by scrolling down.
• You can choose the overlay of your choice by clicking on the + tab or simply dragging and dropping it into the timeline.

• Double click on the image/video with overlay effect.
• Select the effects tab under the image
• You can adjust the shadow of overlay by moving the slider of opacity.
• Hit Ok

3. Using Human Border

• Select the video/image and hit the effects
• Select AI Portrait from the panel.
• Select the desired human border.
• Hit the + tab or you can drag and drop into the timeline.

• Double-click on the human border layer, expand the human border controls panel under the effects
• You can change the color, size, thickness, opacity, etc.
• Hit Ok

How to Add a Border to the Video Online

You can also add borders to your videos/images online. All you need is, have a good internet connection and a browser.

Here is a guide for you to add frames to your video online.

Using Kapwing

• Open the browser and write the “Kapwing video maker”.
• You need to sign in the Kapwing to make an account
• An editing interphase will be opened as below.
• Hit on media and import media by clicking on +
• Drag and drop the video into the timeline.

1st Method

• Double click on the video in the preview window.
• 4 dots will appear on the corner of the video.
• You can drag the blue dots to make a frame and resize the image/video.
• Hit on lock ratio tab to maintain the pixels of the video.

• Double-click on the border area.
• You can change the color of the border.
• You can also resize the length and width of the border.

2nd Method

• Hit the elements and select the frames from the panel.

Here you can take square frames, circle frames, shapes, emoji’s and a lot of more frames.

3rd Method

• Hit the videos
• Select templates, a list of templates will be shown in this panel.
• Select the desired template and drag it into the timeline.

Conclusion

We have discussed different software to add borders. All the software and tools are free to use. Similarly, they can be used on both Mac as well as Windows. They are user-friendly and provide full control over borders. You can use any one of them to make your borders and can easily engage viewers in your videos.

In all of the above applications, I recommend you to use Wondershare filmora 11. It is the most professional software and makes your video stand out.

Way 1. Using a Grid Effect

While working on the project, make sure the aspect ratio of the video is 16:9, and project settings are HD (1080P) and UHD 4K in premiere pro.

Let’s start step by step.

• Drag all the video clips by stacking them on video tracks in the timeline.

• Hit the Effects tab and write the grid in the search panel.

• Simply drag the grid option into the timeline of the videos.

• Select the anchor value to 0 for the x and y.

• Change the size to width and height slider.

• Change the width to 1920 and height to 1080.

Now we have borders added as you can see below.

You can also change the width of the borders.

• Change the width to 30.

You have the option to change the color of the border.

• Select the blending mode to normal.
• Select the color picker tool and change the color of your desire.

Way 2. Using the Essential Graphics Panel

First of all, you wanna be in your premium pro graphics workspace. This will pull off your graphics panel on your right. The good thing about the essential graphics panel is, that it is vector-based. So the different video clips with different resolutions will not pixelate.

Let’s dive in…

Now, to use the graphics panel you need to perform the following steps.

• Import the videos and drag them into the timeline.

• Select the effects

• Find “alpha adjust” and drag it into the effects control.

• Create a 4-point polygon mask.

A rectangular mask will be created. You can edit it according to the frame requirement.

• Go to the corner of the mask border and press the shift key. Drag the border to resize and scale it proportionally.

• Again go to effect controls, under opacity hit invert alpha.

• Under mask hit inverted.

• Go to motion settings, change the position, and

• Go to Alpha adjust and set the mask feathering to 0.

• Now go back to the effects panel and search the paint bucket.

• Under effects controls, hit the alpha channel under the fill selector

• Then hit stroke under the stroke

• You can turn up the stroke width to make it a bit thicker.

• Hit the color tab to change the color of the border as desired.

An Easier Way to Add Borders to Videos on Computer

Filmora Video Editor is one of the best and most efficient video editing applications. It is not only very easy to use but it provides a professional interface for users to make the videos stand out. It can be used for both Windows and Mac.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Let’s learn three different ways to add borders to the video/image using Wondershare Filmora 11.

1. Using the Borders Preset
2. Using overlay preset
3. Using Human Border

1. Using the Borders Preset

• Download Wonder Share Filmora 11 on your device.
• Open the software and hit the import media under the media
• Select the desired media from the storage of your device.
• Drag and drop the selected video/image into the timeline.

• Select the effects tab and hit the utility
• You can search the borders in the search engine and use a border of your choice given in the panel.
• Select the border and hit the + button on the bottom right corner of the border.
• You can drag and drop the border into the timeline.
• You can see the border below.

• You can edit the border by double-clicking the border layer or directly clicking on the border in the preview area.
• The Effects controls will be opened.
• You can change the size, color and opacity of the border, by moving the slider.
• Hit OK

2. Using overlay preset

• Select the video/image layer and hit the effects
• Select overlay from the panel on the left side by scrolling down.
• You can choose the overlay of your choice by clicking on the + tab or simply dragging and dropping it into the timeline.

• Double click on the image/video with overlay effect.
• Select the effects tab under the image
• You can adjust the shadow of overlay by moving the slider of opacity.
• Hit Ok

3. Using Human Border

• Select the video/image and hit the effects
• Select AI Portrait from the panel.
• Select the desired human border.
• Hit the + tab or you can drag and drop into the timeline.

• Double-click on the human border layer, expand the human border controls panel under the effects
• You can change the color, size, thickness, opacity, etc.
• Hit Ok

How to Add a Border to the Video Online

You can also add borders to your videos/images online. All you need is, have a good internet connection and a browser.

Here is a guide for you to add frames to your video online.

Using Kapwing

• Open the browser and write the “Kapwing video maker”.
• You need to sign in the Kapwing to make an account
• An editing interphase will be opened as below.
• Hit on media and import media by clicking on +
• Drag and drop the video into the timeline.

1st Method

• Double click on the video in the preview window.
• 4 dots will appear on the corner of the video.
• You can drag the blue dots to make a frame and resize the image/video.
• Hit on lock ratio tab to maintain the pixels of the video.

• Double-click on the border area.
• You can change the color of the border.
• You can also resize the length and width of the border.

2nd Method

• Hit the elements and select the frames from the panel.

Here you can take square frames, circle frames, shapes, emoji’s and a lot of more frames.

3rd Method

• Hit the videos
• Select templates, a list of templates will be shown in this panel.
• Select the desired template and drag it into the timeline.

Conclusion

We have discussed different software to add borders. All the software and tools are free to use. Similarly, they can be used on both Mac as well as Windows. They are user-friendly and provide full control over borders. You can use any one of them to make your borders and can easily engage viewers in your videos.

In all of the above applications, I recommend you to use Wondershare filmora 11. It is the most professional software and makes your video stand out.

Also read: