New How to Add a Slideshow in PowerPoint for 2024

How to Add a Slideshow in PowerPoint

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

A slideshow view fills the entire computer screen, much like a real slide show. The presentation is exhibited in full-screen mode, as the audience will see it. Graphics, timings, videos, animated elements, and transition effects get displayed in the same way they appear on stage. PowerPoint is an excellent tool for preparing presentations on the fly, whether for a seminar, classroom, lecture hall, conference, or even a contract pitch. With PowerPoint software, you can never go wrong. We’ll show you how to do a slideshow presentation in this post, even if you’re a complete novice who has never used it before.

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

To make the slideshow loop continuously, go to the “ set up” group on the “slide show” tap and check the box next to “Loop continuously until Esc .”Then click OK. The slide will start from the beginning after displaying the last slide.

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

You can choose from a variety of slide layouts and visuals. You can select “New Slide” from either “Home” or “Insert.” You may also right-click any slide in the left-hand panel and select “New Slide.” [1]

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Transitions are essential for tying the presentation together and allowing it to flow smoothly from one image to the next. Go to the “Transitions” tab at the top of the bar and experiment with the various possibilities.

Step 8: Add a Background.

If the white space around the edges of your photographs bothers you, right-click on any slide, choose “Format Background,” and then adjust the background fill. You may change the hue, direction, and transparency of a solid fill, a gradient fill, etc. To make your slides look more professional,

Step 9: Save your PowerPoint

Before exiting, save your show once you’ve finished adding photos and graphics. If you named and saved your presentation at the start, all you have to do now is click the flash drive icon in the upper left corner.

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

To place the audio at your desired location in the slide, select and drag the audio icon to where you want it. If you’re going to use numerous audio per slide, it is better to put the voice icon in the same place on the slide to be easily discoverable.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

If you are looking to present your message to a large audience using slideshows, Filmora software has covered you. Whether you’re a professional at making slideshows or a beginner who wants to try it out for the first time, it has an easy-to-use interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Many people use PowerPoint cause of its simplicity, flexible function, easy sharing and conversion, reliability, and vast template library. So, after going through this, you would know how to add slides in PowerPoint and many more.

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Try It Free Try It Free

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Step 8: Add a Background.

Step 9: Save your PowerPoint

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Try It Free Try It Free

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Step 8: Add a Background.

Step 9: Save your PowerPoint

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Try It Free Try It Free

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Step 8: Add a Background.

Step 9: Save your PowerPoint

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

How to Make Foggy Text Reflection Effect

Preparation

What you need to prepare:

A computer (Windows or macOS)
Your video materials.
Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Go to Titles → drag the Default Title to the Timeline below. Double-click on the clip to open its settings. Here, type in your text → change the font to Montserrat Light. Scroll down and increase Text Spacing to 5.0. Now, select only the first word in the box where you typed your text. Then, change its font to Montserrat Bold. Click OK.

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Double-click the Snapshot clip → go to the Video tab → click the highlighted button below to flip the text. Then, take a Snapshot of this flipped version of the text and delete the clip from the Timeline.

Step 5

Visit the free stock footage site Mixkit and download any smoke or fog background video you like. Then, go to Filmora → My Media → Import Media → and select the footage you downloaded to import it into the video editor. Then, drag the Smoke clip to the Timeline and make it 6 seconds long.

Step 6

Double-click on the clip → go to Color. Now, change Contrast to “49”, Saturation to “100”, and Brightness to “18”. Below, set the 3D LUT option to “Game of Thrones”. Click OK.

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Set the Playhead to the second frame and drop the first Snapshot we took earlier at that starting point. Drag the clip to be 6 seconds long. Then, double-click on the clip and adjust the settings exactly as you see in this image here. Don’t click on OK yet.

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Drag the same Snapshot file to Track 4, directly on top of the clip in Track 3. Make its duration the same too. Now, double-click on this clip and apply the exact same settings as in the image here. Don’t click on OK yet.

Step 13

Move the Playhead to the 17th frame → increase the Opacity to 6%. Now, move the Playhead to 5 seconds and 23rd frame → change X-axis value to “-1944” and the Opacity to 0%. Click OK.

Step 14

Go to Sample Color and drag the White color on Track 6 in the Timeline. Place this clip at the same starting point as the snapshots below it. Set its duration the same as the clips below too. Then, move the Playhead at its starting point.

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Drag another White Sample Color to Track 5 this time. Adjust its duration and starting point to be the same as the clip above it. Double-click on it → go to Video → Mask → Import. Here, select the flipped text Snapshot we created earlier.

Step 19

Now, go to Animation and add a keyframe at the starting point. Then, compress the text on the preview screen exactly as we did before with the other one. Then, add a keyframe at the 1-second position of the clip. Then, adjust the Y-axis position to create a reflection effect, just like this.

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Go back to the Video tab from the upper-left corner of the panel. Now, move the Playhead to the clip’s starting point. Select the Mask tab. Add a keyframe. Move the Playhead to 1 second and set the Blur Strength to 6%.

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Go to Sample Color and drag the “Gradient 4” color to Track 7 on the Timeline. Allow this clip to start from the very beginning and adjust its end time to be the same as all the other clips.

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Change its Blending Mode to “Screen”. Go to the Animation tab and decrease the Opacity to 0%. Move the Playhead to frame 10 → increase Opacity to 12%. Move the Playhead to the 5-second position → add a keyframe. Then, move the Playhead at 5 seconds and 23rd frame → increase the Opacity back to 100%. Click OK.

Step 28

Go to Effects and drag the Cinema effect to Track 9. Adjust its duration to match all the other clips. Double-click on the clip and increase its Border Height to “0.10”. Click OK.

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

Create a foggy text reflection effect in the Filmora video editor
Add and adjust keyframes to clips
Edit and customize text
Take and edit snapshots

Free Download Free Download

What you need to prepare:

A computer (Windows or macOS)
Your video materials.
Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Step 5

Step 6

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Step 13

Step 14

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Step 19

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Step 28

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

Create a foggy text reflection effect in the Filmora video editor
Add and adjust keyframes to clips
Edit and customize text
Take and edit snapshots

Free Download Free Download

What you need to prepare:

A computer (Windows or macOS)
Your video materials.
Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Step 5

Step 6

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Step 13

Step 14

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Step 19

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Step 28

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

Create a foggy text reflection effect in the Filmora video editor
Add and adjust keyframes to clips
Edit and customize text
Take and edit snapshots

Free Download Free Download

What you need to prepare:

A computer (Windows or macOS)
Your video materials.
Filmora video editor

Free Download Free Download

Step 1

Download the Filmora video editor → run it → and click on “New Project”.

Step 2

Step 3

Take a Snapshot of the text you just created. Now, delete the Default Title clip from the Timeline and drag the Snapshot you took to the Timeline.

Step 4

Step 5

Step 6

Step 7

Drag the other Smoke clip to Track 2 of the Timeline. Make it 6 seconds long. Then, move the Playhead to the starting point of the video.

Step 8

Double-click on the new smoke clip. Go to Animation. Decrease the Opacity to 0%. Move the Playhead 10 frames forward → increase the Opacity to 6%. Don’t click OK yet.

Step 9

Move the Playhead to 5 seconds. Click on “**+Add**” to add a keyframe to the clip. Then, move the Playhead to the next-to-last frame and increase the Opacity to 100%. Click OK.

Step 10

Step 11

Move the Playhead at the 17th frame → increase the Opacity to 6%. Move the Playhead to 5 seconds and 23rd frame → change the X-axis value to “1973”. Click OK.

Step 12

Step 13

Step 14

Step 15

Double-click on the Sample Color clip → go to Video → Mask → Import. Here, select the first Snapshot we created earlier in this tutorial.

Step 16

Now, go straight to the Animation tab and click the “**+Add**” button to add a keyframe. Then, compress the text in the preview screen until it’s not visible anymore on the screen.

Step 17

Add keyframes at the 1-second position and at the 5-second position. Then, move the Playhead once more to the 5-second and 22nd frame. Reduce the Opacity to 1%. Click OK.

Step 18

Step 19

Step 20

Move the Playhead to the 5-second position and add a keyframe. Now, move the Playhead directly to 5-seconds and 22 frames. Here, reduce the Opacity to 0%.

Step 21

Step 22

Move the Playhead to 3 seconds. Scroll down and set Vertical to 259%. Set Y-axis to “-157”. Then, increase Blur Strength to 25%. Click OK.

Step 23

Click on the Sample Color in Track 5 and change the Opacity to 40% for the second and third keyframes. You can move between the keyframes on the arrows highlighted below. Click OK.

Step 24

Step 25

Double-click on the Gradient 4 clip → go to Video → Basic. Change the Blending Mode to “Soft Light”. Reduce the Opacity to 42%. Click OK.

Step 26

Go to Project Media and drag the white smoke clip on Track 8. Place the Playhead at the starting point and double-click on the clip.

Step 27

Step 28

Step 29

Finally, Render the video and watch the final result. You’re done! Congratulations on resting a foggy text reflection effect in Filmora.

Summary

What you’ve learned:

Create a foggy text reflection effect in the Filmora video editor
Add and adjust keyframes to clips
Edit and customize text
Take and edit snapshots

Free Download Free Download

The Best Laptops For Video Editing

Choosing the right laptop for video editing can be quite scary, but it doesn’t mean you have to spend a fortune to start out. A few years ago, desktop computers were more appropriate for running top video editing software like Adobe Premiere Pro, DaVinci Resolve, VEGAS Pro because they need more powerful hardware.

Times have changed and a lightweight, powerful laptop is now a perfect alternative for a desktop computer.

The Best Laptops For Video Editing

1. Acer Predator Triton 300 SE

Acer Predator Triton 300 SE

Tips: This powerful Acer laptop is perfect for everyday tasks and will run your video editing software super smooth. With its powerful Intel i7 processor that holds a 3.30 GHz speed, editing video content will feel like never before.

It holds a GeForce RTX 3060 graphics card that has a 6 GB memory capacity for fluent playback, along with 16 GB of DDR4 SDRAM memory so you have no problem running other programs in the background besides your video editing application. This laptop is equipped with a 1 TB solid state drive for your storage. The monitor has a 1920x1080 resolution with a whopping 144Hz refresh rate.

Reasons to Buy

Gorgeous, slim design.
Solid battery life.
Great overall and gaming performance.

2. Dell XPS 17 (2021)

Dell XPS 17 (2021)

When it comes to Dell, people tend to make jokes about the brand, but they have really stepped up their game hardware-wise. This laptop doesn’t standardly hold factory components meaning that you can completely customize your configuration on the specifications. Your options for your solid state drive are 512 GB or 1 TB capacity. Your options for processors are an Intel i5-11400H, an Intel i7-11800H or an Intel i9-11900H.

Tips: For the RAM memory, you can choose between 8, 16 or 32 GB. Besides the hardware specifications, your options for the operating system are Windows 10 Home, Windows 10 Professional, Windows 11 Home or Windows 11 Professional.

3. Apple MacBook Pro M1 (2022)

Apple MacBook Pro M1 (2022)

The workstation we will list next is one of the most powerful devices out there. The Apple MacBook Pro M1 holds a powerful M1 Pro chip, has an 8-core CPU with 6 performance cores and 2 efficiency cores. GPU-wise, you got 14 cores. A 16-core Neutral Engine and 2000GB/s memory bandwidth.

Tips: You have different options for your RAM memory, starting at 16 which is configurable all the way up to 32 GB with the M1 Pro or M1 Max, and 64 GB for the M1 Max. In terms of the graphics card.

Reasons to Buy

High-res display can go very bright.
Long battery life.
Comfortable keyboard.
Robust speakers.

4. Microsoft Surface Book 3

Microsoft Surface Book 3

Meet the laptop that will meet your big demands! This Microsoft Surface Book 3 holds the speed, visual aspects and also gaming options easily! This model is available in both 13.5” and 15’. The display specifications are a 3000x2000 resolution, or a 3240x2160 with either 267 PPI, or 260 PPI. It holds a Intel i5 1035G7 or an i7 1065G7 processor depending on your wishes.

Tips: The RAM capacity is 16 GB and is upgradable to 32 GB for more heavy projects and needs. Depending on which model you buy, the solid state drive holds 256 GB, 512 GB, or 1 TB, or even up to 2 TB on the 15” model.

Reasons to Buy

Good audio.
Long battery life.
Powerful performance.
Elegant design.

5. Razer Blade 15

Razer Blade 15

Tips: The Razer Blade 15 has excellent build quality. Not only is Razer known for robust hardware quality for keyboards and mice, but they also have great and powerful laptops. This Razer Blade 15 features two M.2 ports. So if you’re able to remove the laptop’s bottom panel and solid state drive cover, inserting another drive should be quite easy to do.

Just keep in mind that you should use single-sided modules because double-sided M.2 sticks will not fit. It comes with a 15.6-inch 240Hz QHD display, which gives you a great balance of size and resolution. Razer offers the most recent 12th-gen Intel H-series processors and the Nvidia RTX 30-series graphics cards. The display resolution is.

Reasons to Buy

Supercharged performance.
Below-average battery life.
Exorbitantly expensive.

6. Asus ProArt Studiobook 16 OLED

Asus ProArt Studiobook 16 OLED

Let’s talk Asus. It’s absolutely a considerable option. This laptop comes with an Intel Xeon W-11955M 8x2.6 GHz. The graphics card equipped is a Nvidia RTX A5000 Laptop GPU. The monitor resolution is 3840x2400 pixels with a whopping 283 PPI.

Tips: You can upgrade your RAM up to 64 GB of DDR4 depending on your wants and needs. We believe that this is a very solid option as it will be able to handle all your projects very effortlessly.

Reasons to Buy

Attractive looks and premium feel.
Excellent performance.
Bright and colorful display.

Reasons to Buy

Gorgeous, slim design.
Solid battery life.
Great overall and gaming performance.

2. Dell XPS 17 (2021)

Dell XPS 17 (2021)

3. Apple MacBook Pro M1 (2022)

Apple MacBook Pro M1 (2022)

Reasons to Buy

High-res display can go very bright.
Long battery life.
Comfortable keyboard.
Robust speakers.

4. Microsoft Surface Book 3

Microsoft Surface Book 3

Reasons to Buy

Good audio.
Long battery life.
Powerful performance.
Elegant design.

5. Razer Blade 15

Razer Blade 15

Reasons to Buy

Supercharged performance.
Below-average battery life.
Exorbitantly expensive.

6. Asus ProArt Studiobook 16 OLED

Asus ProArt Studiobook 16 OLED

Tips: You can upgrade your RAM up to 64 GB of DDR4 depending on your wants and needs. We believe that this is a very solid option as it will be able to handle all your projects very effortlessly.

Reasons to Buy

Attractive looks and premium feel.
Excellent performance.
Bright and colorful display.

How to Make Hand Shake Effect with Final Cut Pro

Are you struggling to attract audiences to your videos? If so, you may consider adding effects to them during your editing process. Most video editing software includes preset video effects to create and publish attractive videos quickly. For example, Final Cut Pro is a video editing software for Apple devices and includes lots of editing tools and video effects. Here is a detailed guide on how to apply the Final Cut Pro camera shake effect to your videos.

What are hand shake effects for
What kind of shots are best for such an effect
Is it better to hand shake when shooting or add the effects

How to Add a hand shake effect with FCPX

A licensed copy of Final Cut Pro X
A compatible video file
Camera shake effect plugins

How to add hand shake effect in the simplest way

Import your video
Applying Wondershare Filmora’s hand shake effect
Exporting your final project

FAQs

Part1: When Do You Need a Hand Shake Effect?

Adding effects to your videos is a great way to make them more impactful. However, you need to apply them correctly for them to be effective. The following information explores different aspects of the Final Cut Pro camera shake effect, including its definition, why video creators use it, and how best to apply it.

What are hand shake effects for?

Hand shake effects are video adjustments you apply to specific scenes that make the shot vibrate. Depending on the software you use, there are multiple variations of the effect. In addition, developers refer to it by different names. For example, Final Cut Pro users know it as the earthquake effect, which is a preset video effect in most versions of the software.

Typically, video creators use the Final Cut Pro camera shake effect to add energy to their videos. As such, their scenes are more dramatic and encourage you to pay more attention to the video. For example, you can apply the effect to indicate the arrival of the villain in your video. In addition, the effect will be more impactful if the villain is a giant.

You can also use the camera shake video effect for the following purposes:

Break the monotony in a scene. Applying this scene after a long dialogue scene will give your audience a brief respite, allowing them to regain their focus.
The camera shake effect can also be an effective tool to build your brand identity. Instead of applying it during the screenplay, you can use it in the end credits to introduce your logo to audiences. Furthermore, you can include a creative sound track for additional emphasis.

What kind of shots are best for such an effect?

The best shot to apply the camera shake effect are still shots. This is because they give you extra creative room with the scene since the subjects are facing the camera directly from a level angle. As such, you can customize unique motion patterns for each subject when applying the camera shake effect.

Is it better to hand shake when shooting or add the effects?

Although it may seem tempting to physically shake the camera when shooting, most filmmakers prefer to add the effect during editing. This is because shaking the camera during shooting may result in unusable shots in post-production. For example, shooting a car scene from a hand-held camera in the passenger seat often results in shaky footage. As such, video creators mount the camera on a tripod to capture still shots and then add the camera shake during post-production.

Part2: How to Add a hand shake effect with FCPX?

The following is a step-to-step guide on how to add a hand shake effect on Final Cut Pro X. However, you need to meet the following requirements for the process to work.

A licensed copy of Final Cut Pro X

The camera shake effect is only available with the full version of Final Cut Pro X. In addition, you will access all variations of the effect with the full version.

A compatible video file

Apple’s Final Cut Pro X is compatible with the following video file formats:

QuickTime formats.
Apple ProRes
Apple Animation Codec
XF-AVC
Container files, such as3GP, AVI, and MP4.

Camera shake effect plugins

The video editing software comes with preset camera shake effects, which you can find in the Effects Browser. However, you can also download compatible plugins from established sources, such as the Camera Shake Effects pack from Motion Array.

Once you have everything in place, follow the below steps.

Import your desired video clip to the Final Cut Pro X workspace. Your video will appear in the timeline section at the bottom of your workspace.

Select the section where you want to add the camera shake effect. In addition, you need to set the in and out points from the timeline. For example, Mac users can set these points by pressing the Iand O keys, respectively.
Then, select the Shakefrom the Effects browser and search for Hand Held.

Drag the effect over your selection to apply the effect.
You can also make additional adjustments to your hand-held shake effect from the inspector panel.

For example, you can prevent black borders from appearing with the effect by increasing the Scale attribute to 105%. Scroll to the bottom right section of your workspace to the Inspector Panel, and click on Scale to make the adjustment.

Part3: How to add hand shake effect in the simplest way?

If the above guide is too complicated for you, Wondershare Filmora offers you the simplest way to add the hand shake effect to your videos.

The program is a stand-alone video editor for Windows and macOS users. It comes with a variety of preset camera shaking effects, including

Up-down shaking
Extreme shaking
Chaos shaking
Sideways shaking

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The above effects offer various shaking intensities and patterns to help you achieve your desired effect. In addition, you will need to purchase a license to access the different versions of the hand shake video effect. Once you have Wondershare Filmora running on your device, follow the below steps to add the hand shake effect to your videos.

1. Import your video

Click on the Import tab on your user interface and select Import Media Files. Then, drag and drop the files you want to edit to your timeline from the resulting window.

2. Applying Wondershare Filmora’s hand shake effect

Click on the Effects tab from the user interface and then select Filters. Next, proceed to the Shake subcategory to view all available presets. Currently, the program has eight camera shake presets, which you can preview using the pop-up thumbnail on your workspace.

Once you identify your desired effect, drag and drop it over the video selection, you want to apply it. You can make further adjustments using the sliders on the effect’s sub menu. For example, you can vary the duration of the effect by adjusting the frequency and intensity sliders.

Finally, click on Ok to apply the hand shake effect to your video and save the changes.

3. Exporting your final project

Wondershare Filmora allows you to export your completed projects to external locations, such as external hard drives and cloud storage. In addition, you can directly upload your videos to YouTube and Vimeo from the workspace.

Here is how to export videos from Filmora:

Click on the Exporttab from the program’s main menu.
Identify your file destination from the options on the Export The latest version of Filmora allows file exports to your local storage, YouTube, Vimeo, and DVD.
Select your file format from the left menu and click Exporton the bottom right corner to finalize the process. Some of the available file formats include MP4, WMV, and FLV.

Kindly note that the above guide is for the latest version of Wondershare Filmora. As such, confirm that you have the latest edition before using it. Alternatively, you can download the latest version for free from the Filmora website.

FAQs

1. What are the minimum system requirements to run Film Cut Pro X?

According to Apple, your device needs to have the below minimum system requirements.

4 gigabytes of RAM. However, running the program on a device with 8 GB RAM allows you to work with 4K videos and perform 360-degree video editing seamlessly.
A dedicated graphics processing unit with at least 1 GB of VRAM.
About 4.5 GB of storage space for Final Cut Pro’s system files.
An active internet connection to enable access to online customer support and additional features.
You will also need a Blu-ray recorder to export videos directly to DVDs.
Finally, your device should be running macOS 11.5.1 or later.

2. Can you import custom hand shake effects to Final Cut Pro?

Yes, you can import custom hand shake effects to your licensed version of Final Cut Pro. However, always install custom plugins from verifiable sites to prevent the installation of malicious software such as spyware. Some of the sites to consider consist of Motion Array, Studio Binder, and FCPX Free. For example, you can check out these 10 free plugins for Final Cut Pro from Filmora .

A licensed copy of Final Cut Pro X
A compatible video file
Camera shake effect plugins
How to add hand shake effect in the simplest way

Import your video
Applying Wondershare Filmora’s hand shake effect
Exporting your final project

FAQs

Part1: When Do You Need a Hand Shake Effect?

What are hand shake effects for?

You can also use the camera shake video effect for the following purposes:

Break the monotony in a scene. Applying this scene after a long dialogue scene will give your audience a brief respite, allowing them to regain their focus.
The camera shake effect can also be an effective tool to build your brand identity. Instead of applying it during the screenplay, you can use it in the end credits to introduce your logo to audiences. Furthermore, you can include a creative sound track for additional emphasis.

What kind of shots are best for such an effect?

Is it better to hand shake when shooting or add the effects?

Part2: How to Add a hand shake effect with FCPX?

The following is a step-to-step guide on how to add a hand shake effect on Final Cut Pro X. However, you need to meet the following requirements for the process to work.

A licensed copy of Final Cut Pro X

The camera shake effect is only available with the full version of Final Cut Pro X. In addition, you will access all variations of the effect with the full version.

A compatible video file

Apple’s Final Cut Pro X is compatible with the following video file formats:

QuickTime formats.
Apple ProRes
Apple Animation Codec
XF-AVC
Container files, such as3GP, AVI, and MP4.

Camera shake effect plugins

Once you have everything in place, follow the below steps.

Import your desired video clip to the Final Cut Pro X workspace. Your video will appear in the timeline section at the bottom of your workspace.

Select the section where you want to add the camera shake effect. In addition, you need to set the in and out points from the timeline. For example, Mac users can set these points by pressing the Iand O keys, respectively.
Then, select the Shakefrom the Effects browser and search for Hand Held.

Drag the effect over your selection to apply the effect.
You can also make additional adjustments to your hand-held shake effect from the inspector panel.

Part3: How to add hand shake effect in the simplest way?

If the above guide is too complicated for you, Wondershare Filmora offers you the simplest way to add the hand shake effect to your videos.

The program is a stand-alone video editor for Windows and macOS users. It comes with a variety of preset camera shaking effects, including

Up-down shaking
Extreme shaking
Chaos shaking
Sideways shaking

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

1. Import your video

Click on the Import tab on your user interface and select Import Media Files. Then, drag and drop the files you want to edit to your timeline from the resulting window.

2. Applying Wondershare Filmora’s hand shake effect

Finally, click on Ok to apply the hand shake effect to your video and save the changes.

3. Exporting your final project

Here is how to export videos from Filmora:

Click on the Exporttab from the program’s main menu.
Identify your file destination from the options on the Export The latest version of Filmora allows file exports to your local storage, YouTube, Vimeo, and DVD.
Select your file format from the left menu and click Exporton the bottom right corner to finalize the process. Some of the available file formats include MP4, WMV, and FLV.

FAQs

1. What are the minimum system requirements to run Film Cut Pro X?

According to Apple, your device needs to have the below minimum system requirements.

4 gigabytes of RAM. However, running the program on a device with 8 GB RAM allows you to work with 4K videos and perform 360-degree video editing seamlessly.
A dedicated graphics processing unit with at least 1 GB of VRAM.
About 4.5 GB of storage space for Final Cut Pro’s system files.
An active internet connection to enable access to online customer support and additional features.
You will also need a Blu-ray recorder to export videos directly to DVDs.
Finally, your device should be running macOS 11.5.1 or later.

Ai Editing Video

New How to Add a Slideshow in PowerPoint for 2024

How to Add a Slideshow in PowerPoint

How to Add a Slideshow in PowerPoint

In this article

Part 1 How to Add Slideshow in PowerPoint

Part 2 How to Prepare Slideshows in PowerPoint

Part 3 How to Play Slideshow in PowerPoint Automatically

Part 4 How to Add Sound to a PowerPoint Slideshow

Part 5 How to View Slide Show in PowerPoint

Part 6 How to Add Audio to a Slideshow

● Ending Thoughts →

In this article

Part 1 How to Add Slideshow in PowerPoint

Part 2 How to Prepare Slideshows in PowerPoint

Part 3 How to Play Slideshow in PowerPoint Automatically

Part 4 How to Add Sound to a PowerPoint Slideshow

Part 5 How to View Slide Show in PowerPoint

Part 6 How to Add Audio to a Slideshow

● Ending Thoughts →

In this article

Part 1 How to Add Slideshow in PowerPoint

Part 2 How to Prepare Slideshows in PowerPoint

Part 3 How to Play Slideshow in PowerPoint Automatically

Part 4 How to Add Sound to a PowerPoint Slideshow

Part 5 How to View Slide Show in PowerPoint

Part 6 How to Add Audio to a Slideshow

● Ending Thoughts →

In this article

Part 1 How to Add Slideshow in PowerPoint

Part 2 How to Prepare Slideshows in PowerPoint

Part 3 How to Play Slideshow in PowerPoint Automatically

Part 4 How to Add Sound to a PowerPoint Slideshow

Part 5 How to View Slide Show in PowerPoint

Part 6 How to Add Audio to a Slideshow

● Ending Thoughts →

How to Make Foggy Text Reflection Effect

The Best Laptops For Video Editing

1. Acer Predator Triton 300 SE

Reasons to Buy

2. Dell XPS 17 (2021)

3. Apple MacBook Pro M1 (2022)

Reasons to Buy

4. Microsoft Surface Book 3

Reasons to Buy

5. Razer Blade 15

Reasons to Buy

6. Asus ProArt Studiobook 16 OLED

Reasons to Buy

Reasons to Buy

2. Dell XPS 17 (2021)

3. Apple MacBook Pro M1 (2022)

Reasons to Buy

4. Microsoft Surface Book 3

Reasons to Buy

5. Razer Blade 15

Reasons to Buy

6. Asus ProArt Studiobook 16 OLED

Reasons to Buy

How to Make Hand Shake Effect with Final Cut Pro

Part1: When Do You Need a Hand Shake Effect?

What are hand shake effects for?

What kind of shots are best for such an effect?

Is it better to hand shake when shooting or add the effects?

Part2: How to Add a hand shake effect with FCPX?

A licensed copy of Final Cut Pro X

A compatible video file

Camera shake effect plugins

Part3: How to add hand shake effect in the simplest way?

1. Import your video

2. Applying Wondershare Filmora’s hand shake effect

3. Exporting your final project

FAQs

1. What are the minimum system requirements to run Film Cut Pro X?

2. Can you import custom hand shake effects to Final Cut Pro?

Part1: When Do You Need a Hand Shake Effect?

What are hand shake effects for?

What kind of shots are best for such an effect?

Is it better to hand shake when shooting or add the effects?

Part2: How to Add a hand shake effect with FCPX?