How to Make Video Slow Motion?

Slow-motion videos are in trend now, especially when shooting for Instagram Reels , TikTok videos, or YouTube Shorts . While many users record the entire video in slow motion, there are others who need only a particular section of a clip to play at a reduced speed. Nevertheless, slowing down footage is no longer rocket science, thanks to the advancements in technology, and the availability and ease of access to relevant apps.

That said, here you will learn what is needed to record a video in slow motion, and how to get the job done in a simple way. In addition, you will also learn how to reduce the playback speed of an already existing video if it was recorded at a normal pace.

In this article

01 How to Make Slow Motion Videos via Recording?

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

How to Polish Your Music Video Edits Using Filmora

A common understanding in cinematography circles is that editing makes the seventy percent of the total job. It is editing that makes a significant difference, and Filmora, a professional video editor, comes in handy when you want to edit your photos.

Filmora has multiple features that allow you to shine your videos in countless ways. This article will clarify everything you need to improve your music video. Also, it is just the tip of the iceberg. The more you try to be creative, the more options Filmora will provide you. The following points highlight how you can polish your music video editing skills.

Part 1. Duplicate your project before editing

Before you begin unleashing your inner creativity, you must make a duplicate copy of your project file. Of course, it would help if you did so to keep a backup file.

It will help you get back to the pre-edit file if you want to start from the beginning or if you want to save the file for use in the future. You can make a duplicate file of your project by following the subsequent steps.

Step1Download and install Filmora

You can download Filmora from its official website.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2Create or import your project

• Create a project if you are using Filmora for the first time.
• Import the project from your computer directory. Then, go to file in the menu bar, and click on the open project.

• Select the project you want to open.

Step3Duplicate the project file and rename it

• When you open Filmora, a start-up window will appear.
• Right-click on the project you want to duplicate.

Step4Rename the duplicate file

• Rename the file to keep a record of new editions.

The file is renamed. It will help you remember which file is original. If your files become corrupted, you can easily access the original ones. Once you are done duplicating your project file, it is time to do our primary job: Polishing our video edits with Filmora .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 2. Polishing Your Music Video

Just like ladies apply polish to their nails to make them more attractive, you can use editing to your music video to get the same result. Ladies can go to the beautician if they want. You can go to a professional editor if you like it.

However, these options are pretty expensive. The best way is to do it yourself. It is fun. Also, you can let loose your hidden artist for a while. Stick to the following points to understand how to begin polishing your music video.

How to put cuts on beats?

Adding beat cuts to a music video is imperative. Randomly placing beats yield an inferior-quality video. It also gives the impression that video editing is not done by a professional. The beats must be adjusted to synchronize with the storyline of the video.

Moreover, the video will lose its charm if you put cuts on every beat. People will not be able to enjoy, let alone understand, what is happening in the film.

What are the beats?

Beats are pieces of music that recur in a pattern. They are essential for music videos. It adds attraction for the viewers. Also, without beats, no music video can go viral. In the digital age, beats boost your music video.

Note: Cuts are recommended on every 2nd and 4th beat. In that way, a smooth transition of music beats takes place, making it more ear-pleasing. It also gives a professional outlook to the whole music.

Let’s learn how you can put cuts on your beats.

Step1Import the music video

• Import the Music video to which you would like to add any beat.
• You can also use the one given in Filmora.
• Drag and Drop the music video in the timeline panel.

Step2Detach its audio

• Right-click on the video.
• Select the option “Detach Audio.” It will separate the attached audio from the music. You will be able to add cuts where you deem necessary.

You can also import audio from your drive. After that, drag and drop the imported file into the timeline panel.

• Right, Click on the audio file in the audio panel.
• Select the option “Beat Detection.” It will show beats (with red markers) on the audio timeline, making adding cuts to the beat easy.

Step3Cut the beats where you find necessary

• Listen carefully to the audio file and plan where you want to add a cut to your beat.

• Adjust the beat according to your music video.
• Join the trimmed video segments to maintain continuity. The final product should look like the one given below.

Resultantly, it will readjust the beat to a different spot on the video. You can make multiple cuts in the beats. However, it is not recommended. It makes the whole experience of listening quite jarring.

Once you’ve added cuts to the beats, it is time to make them smooth. For that, keep reading the instructions given below.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to smooth out cuts

Adding cuts in the beats is one part of the job, not the whole job. After adding these cuts, you have to smoothen them. With it, the point of interest for the audience becomes clear.

To maintain the audience’s attention on our video, we have to smoothen the cuts so that our audience quickly understands the ongoing story in our video. If sudden changes occur on the screen, watching it gets disconcerting.

Indeed, you would not want your audience to have this experience. Head to the following techniques to understand how to smooth out video cuts

Technique 1: Showing multiple perspectives

The focal person in the video must occupy the same spot in the previous shot as it maintains in the current shot.

Let us understand from the example given below.

• Shot 1: The actress in the music video is occupying the left seat on the bus while looking outside.

• Shot 2: The actress occupies the same spot in the subsequent shot.

• Third Shot: The shot shows the wide angle of the bus from the inside. The actress is still sitting in the same position and the same place.

This technique keeps the audience focused on the point of interest while giving them a different perspective of the scene.

Technique 2: Using light leaks

The technique is quite helpful for the transition between two cuts. It uses different levels of colors to shine between cuts, adding smoothness and providing coherence.

What are light leaks?

Light leaks are great effects in Filmora. These effects fill the screen with light. It seems that light is leaking in a disorderly fashion. For the time being, the whole screen is filled with that effect. Thus, it explains the name of this effect as a light leak.

Filmora provides a plethora of features for adding Light Leak for transitioning cuts. With the use of Filmora, one can quickly bring a level of flow to the music video. Keep reading to understand how to use this remarkable feature of Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Access the light leak effects on Filmora

• Go to Effects on the Interface.
• Go to Overlay and choose the light Leak feature.
• You can also use any other light Leak stock in your capacity.

Step2Drag and drop the effects in the video editing

• Drag and drop the effect between any two cuts where you want to add this feature for a smooth transition.
• The effects should be placed above the video, in the timeline over the clip.

Step3Setting the color and blend of the light leak effect

• Right-click on the clip, and go to “Edit Properties.”

• Go to the Composing menu. Then, go to “Blend Mode” and choose “Screen.”
• It will adjust the light Leak feature to your entire screen.

Step4Fit the effect to the width of the screen

• Go to the Transform option in the clip properties.
• Click on both circles in front of the Scale option. It will adjust the effect to the entire frame width, giving it a pleasing outlook.

There you go! Your light Leak filter is ready. Give attention to how the light floods the screen and the scene transitions from one part to the next.

Now, you are done with adding some additional color and light to your cuts. Your cuts are now smooth and trouble-free. Moving onto our next tip that will further polish your music video. It is called Reframing and Zooming.

Reframe and zoom to polish your video

Another significant feature of Filmora is that it allows you to readjust the frame and zoom of the video. Any zooming option left undone in the shooting phase can be addressed in the editing phase.

For example, a director did an excellent job shooting a video. He considered every angle and yielded the best video shoot he could achieve. However, he missed a few zooming-out techniques while shooting. Now, what should one do? Use Filmora.

It is where the reframing and zooming feature of Filmora comes into play and saves the day.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

What are the reframing and zooming features?

This feature allows you to adjust the zoom on the point of interest in the music video. If you want to add extra focus on a certain point, the feature in Filmora can do that for you. You can run zoom in or zoom out on any particular object or actor. Follow the given steps to understand how you can do that.

Step1Plan your video

• Where you want to reframe and zoom. Trim that part of the video.

Step2Choose any two points on the clip for reframing

• Choose any two points on the clip. These points are reference points. When the clip moves from one point to the next point, the reframing takes place.

Step3Adjust the scale and position of the clip

• Go to the Transform option in Clip properties.
• Go to the clip’s end (2nd point), and turn on the Scale and Position circles.

• Go to the start of the clip
• And adjust the value of scale and position.

Atl Text: Setting new value to Scale and Position.

Step4Replay the clip

• Once the scale readings and position in the initial point are set, replay the clip to observe the reframing.

You can use it on the static shots if you want. The procedure is the same. You have to adjust the scale and position of the screen to adjust reframing. Thus, Filmora fills gaps in your music video without the need to reshoot.

Final words

Video editing requires patience, creativity, and efficient tools. Filmora provides the most effective means to run various effects on your video. You can add cuts to your, smoothen your cuts, and readjust the frame of your video. These are merely a few features to mention.

In a nutshell, Filmora assists you in polishing your music video. You will not need a professional editor. You will become one in no time.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Step2Create or import your project

• Create a project if you are using Filmora for the first time.
• Import the project from your computer directory. Then, go to file in the menu bar, and click on the open project.

• Select the project you want to open.

Step3Duplicate the project file and rename it

• When you open Filmora, a start-up window will appear.
• Right-click on the project you want to duplicate.

Step4Rename the duplicate file

• Rename the file to keep a record of new editions.

The file is renamed. It will help you remember which file is original. If your files become corrupted, you can easily access the original ones. Once you are done duplicating your project file, it is time to do our primary job: Polishing our video edits with Filmora .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 2. Polishing Your Music Video

Just like ladies apply polish to their nails to make them more attractive, you can use editing to your music video to get the same result. Ladies can go to the beautician if they want. You can go to a professional editor if you like it.

However, these options are pretty expensive. The best way is to do it yourself. It is fun. Also, you can let loose your hidden artist for a while. Stick to the following points to understand how to begin polishing your music video.

How to put cuts on beats?

Adding beat cuts to a music video is imperative. Randomly placing beats yield an inferior-quality video. It also gives the impression that video editing is not done by a professional. The beats must be adjusted to synchronize with the storyline of the video.

Moreover, the video will lose its charm if you put cuts on every beat. People will not be able to enjoy, let alone understand, what is happening in the film.

What are the beats?

Beats are pieces of music that recur in a pattern. They are essential for music videos. It adds attraction for the viewers. Also, without beats, no music video can go viral. In the digital age, beats boost your music video.

Note: Cuts are recommended on every 2nd and 4th beat. In that way, a smooth transition of music beats takes place, making it more ear-pleasing. It also gives a professional outlook to the whole music.

Let’s learn how you can put cuts on your beats.

Step1Import the music video

• Import the Music video to which you would like to add any beat.
• You can also use the one given in Filmora.
• Drag and Drop the music video in the timeline panel.

Step2Detach its audio

• Right-click on the video.
• Select the option “Detach Audio.” It will separate the attached audio from the music. You will be able to add cuts where you deem necessary.

You can also import audio from your drive. After that, drag and drop the imported file into the timeline panel.

• Right, Click on the audio file in the audio panel.
• Select the option “Beat Detection.” It will show beats (with red markers) on the audio timeline, making adding cuts to the beat easy.

Step3Cut the beats where you find necessary

• Listen carefully to the audio file and plan where you want to add a cut to your beat.

• Adjust the beat according to your music video.
• Join the trimmed video segments to maintain continuity. The final product should look like the one given below.

Resultantly, it will readjust the beat to a different spot on the video. You can make multiple cuts in the beats. However, it is not recommended. It makes the whole experience of listening quite jarring.

Once you’ve added cuts to the beats, it is time to make them smooth. For that, keep reading the instructions given below.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to smooth out cuts

Adding cuts in the beats is one part of the job, not the whole job. After adding these cuts, you have to smoothen them. With it, the point of interest for the audience becomes clear.

To maintain the audience’s attention on our video, we have to smoothen the cuts so that our audience quickly understands the ongoing story in our video. If sudden changes occur on the screen, watching it gets disconcerting.

Indeed, you would not want your audience to have this experience. Head to the following techniques to understand how to smooth out video cuts

Technique 1: Showing multiple perspectives

The focal person in the video must occupy the same spot in the previous shot as it maintains in the current shot.

Let us understand from the example given below.

• Shot 1: The actress in the music video is occupying the left seat on the bus while looking outside.

• Shot 2: The actress occupies the same spot in the subsequent shot.

• Third Shot: The shot shows the wide angle of the bus from the inside. The actress is still sitting in the same position and the same place.

This technique keeps the audience focused on the point of interest while giving them a different perspective of the scene.

Technique 2: Using light leaks

The technique is quite helpful for the transition between two cuts. It uses different levels of colors to shine between cuts, adding smoothness and providing coherence.

What are light leaks?

Light leaks are great effects in Filmora. These effects fill the screen with light. It seems that light is leaking in a disorderly fashion. For the time being, the whole screen is filled with that effect. Thus, it explains the name of this effect as a light leak.

Filmora provides a plethora of features for adding Light Leak for transitioning cuts. With the use of Filmora, one can quickly bring a level of flow to the music video. Keep reading to understand how to use this remarkable feature of Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Access the light leak effects on Filmora

• Go to Effects on the Interface.
• Go to Overlay and choose the light Leak feature.
• You can also use any other light Leak stock in your capacity.

Step2Drag and drop the effects in the video editing

• Drag and drop the effect between any two cuts where you want to add this feature for a smooth transition.
• The effects should be placed above the video, in the timeline over the clip.

Step3Setting the color and blend of the light leak effect

• Right-click on the clip, and go to “Edit Properties.”

• Go to the Composing menu. Then, go to “Blend Mode” and choose “Screen.”
• It will adjust the light Leak feature to your entire screen.

Step4Fit the effect to the width of the screen

• Go to the Transform option in the clip properties.
• Click on both circles in front of the Scale option. It will adjust the effect to the entire frame width, giving it a pleasing outlook.

There you go! Your light Leak filter is ready. Give attention to how the light floods the screen and the scene transitions from one part to the next.

Now, you are done with adding some additional color and light to your cuts. Your cuts are now smooth and trouble-free. Moving onto our next tip that will further polish your music video. It is called Reframing and Zooming.

Reframe and zoom to polish your video

Another significant feature of Filmora is that it allows you to readjust the frame and zoom of the video. Any zooming option left undone in the shooting phase can be addressed in the editing phase.

For example, a director did an excellent job shooting a video. He considered every angle and yielded the best video shoot he could achieve. However, he missed a few zooming-out techniques while shooting. Now, what should one do? Use Filmora.

It is where the reframing and zooming feature of Filmora comes into play and saves the day.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

What are the reframing and zooming features?

This feature allows you to adjust the zoom on the point of interest in the music video. If you want to add extra focus on a certain point, the feature in Filmora can do that for you. You can run zoom in or zoom out on any particular object or actor. Follow the given steps to understand how you can do that.

Step1Plan your video

• Where you want to reframe and zoom. Trim that part of the video.

Step2Choose any two points on the clip for reframing

• Choose any two points on the clip. These points are reference points. When the clip moves from one point to the next point, the reframing takes place.

Step3Adjust the scale and position of the clip

• Go to the Transform option in Clip properties.
• Go to the clip’s end (2nd point), and turn on the Scale and Position circles.

• Go to the start of the clip
• And adjust the value of scale and position.

Atl Text: Setting new value to Scale and Position.

Step4Replay the clip

• Once the scale readings and position in the initial point are set, replay the clip to observe the reframing.

You can use it on the static shots if you want. The procedure is the same. You have to adjust the scale and position of the screen to adjust reframing. Thus, Filmora fills gaps in your music video without the need to reshoot.

Final words

Video editing requires patience, creativity, and efficient tools. Filmora provides the most effective means to run various effects on your video. You can add cuts to your, smoothen your cuts, and readjust the frame of your video. These are merely a few features to mention.

In a nutshell, Filmora assists you in polishing your music video. You will not need a professional editor. You will become one in no time.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Be a YouTube Vlogger

Being a vlogger is a lot of fun specially making videos but is not also very easy, there are times you feel giving up specially when no one in the family supports you, there are also times when you get tired because you think no one is interested in your videos, but very fulfilling at the same time being able to do what you love. As you all know making video on YouTube is making also money that is through google AdSense, but if you are into money without the passion of being a vlogger, you will definitely get tired immediately, because being a vlogger requires more effort, patience, love of work, creativity and most specially passion.

Note: You don’t need to study a career to become a vlogger, but it’s not easy as simply pressing the publishing button. You’ll need a purpose, a message, a platform, an audience and more.

In this article I will share to you my tips and experiences on How to become a YouTube Vlogger and things you need to consider being a Vlogger.

1. ❶ Content
2. ❷ Equipment
3. ❸ Skills
4. ❹ Editing Skils
5. ❺ Collaborate

1. What is Vlog?

A Vlog is a piece of video that document a person’s life or expertise, with an average length of around five minutes. The word vlog is “video” and “blog”. Vlog are created to connect with an audience through shared ideas and experiences in the form of video.

2. Tips on How to Become a YouTube Vlogger

• Create a Channel
• Content
• Equipment
• Skills
• Collaborate

3. Create a YouTube Channel

Your channel name is the official name for your channel on YouTube. Your channel name is a big part of how people will define and understand what your channel is about. So, it’s important that your name accurately represents your brand. It’s important that your name stands out from another channel on YouTube or should be unique.

Note: So before deciding on a name, pop your potential name into YouTube and see what comes up, if you can’t find any similar sounding channels, you’re good to go.

For example, my channel name is Mayang Dyosa, Mayang is what my family and friend called me and Dyosa means Goddess. I find it unique and cute because that’s my dream to be a Goddess.

❶ Content

One of the challenging parts being a YouTuber is finding a right content for your channel.

You can use YouTube’s trending page this is the easiest way to find trending topic for you to have an idea of what topic or content you like. You can always use or share experiences to be your topic content whether it is beauty, make-up tutorial, DIY’s, Skin care ideas, etc. As long as you can share honestly and correctly.

Do whatever you love, do something that you like, expertise, make a relatable videos or timely videos and searchable videos. Create a content that people need or are often searched for online, content that can provide information to people. I suggest you go with “how to” videos, because people always searched for this kind of content.

Vlog Content

❷ Equipment

Gear is essential for making a YouTube video obviously a camera is the most important piece of equipment, you can use anything that can record at least 1080p resolution of video. You can use your mobile phone or a digital camera. Whatever your equipment you have now, you can start your first vlog as long as you can record a video at you have a clear audio you are good to go.

Many of the successful YouTube creators started with very simple equipment so don’t let equipment get in your way. Start your vlog now!

Vlog Equipment

❸ Skills

Vlog Editing Skills

Speaking with confident in the front of camera is always a skill of being a vlogger, you must be talkative in order for you to share more information to you viewers but make sure that your ideas are related to your chosen content.

You should be entertaining in front of the camera so that the viewers don’t get bored, because sometimes it’s not just the information that excite them to watch a vlogger, but also on how you entertain the viewers.

Entertain in Front of the Camera

❹ Editing Skils

In Editing skills, there are two ways you can edit your vlog, first on your phones, second on your pc or laptops.

You don’t have to be good at editing but this is one of the things you need to study to make your videos better.

Entertain in Front of the Camera2

Wondershare Filmora Video Editor is one of my personally used editing software, this is considered to be the best option for YouTubers because there is how-to video guide that allows anyone to quickly pick up the pace and start producing or creating an eye-catching video.

Wondershare Filmora 11 The Best video editor that makes your editing experience efficient and playful.

Try It Free Try It Free Learn More

I am using this software for almost 5 years and always satisfied by its performance. It is easy to use software with a lot of tools needed to edit a video in a fast way and it even has animation/affects you can add to your video to look more creative and catchier.

Filmora allows you to export your videos in multiple video formats with lot of customization settings.

Wondershare Filmora

It also allows you to export your videos directly to your social media platforms like YouTube, Facebook, Vimeo. The speed of exporting videos is also quite fast so not time consuming.

❺ Collaborate

It really helps your channel to grow if you collaborate with someone that is same passion as you, you can share ideas of content and help one another channel grow. Also, this will help others to know that you also have a YouTube channel and this is another way to promote your channel by the help of other content creator. In this way you can gain a friend and someone that you can seek for advice as you are starting for your career.

Wondershare Filmora

Wrap Up

• You must also remember when starting to be a vlogger you should be emotionally and mentally ready because this is not easy as you expected.
• You can earn money by doing a vlog but don’t make the money to be your motivation to be a Vlogger, ask yourself first if this is really you like or is this really your passion? because being a Vlogger comes with great responsibility and it comes with great effort.
• If you are ready to become a vlogger because of the tips I gave, you can start now but you should not expect more subscriber and views immediately because you still need a lot effort and a lot of work to get people get to know your channel. So just keep working and work hard on the content, one day you will be famous and recognized by many.

In this article I will share to you my tips and experiences on How to become a YouTube Vlogger and things you need to consider being a Vlogger.

1. ❶ Content
2. ❷ Equipment
3. ❸ Skills
4. ❹ Editing Skils
5. ❺ Collaborate

1. What is Vlog?

A Vlog is a piece of video that document a person’s life or expertise, with an average length of around five minutes. The word vlog is “video” and “blog”. Vlog are created to connect with an audience through shared ideas and experiences in the form of video.

2. Tips on How to Become a YouTube Vlogger

• Create a Channel
• Content
• Equipment
• Skills
• Collaborate

3. Create a YouTube Channel

Your channel name is the official name for your channel on YouTube. Your channel name is a big part of how people will define and understand what your channel is about. So, it’s important that your name accurately represents your brand. It’s important that your name stands out from another channel on YouTube or should be unique.

Note: So before deciding on a name, pop your potential name into YouTube and see what comes up, if you can’t find any similar sounding channels, you’re good to go.

For example, my channel name is Mayang Dyosa, Mayang is what my family and friend called me and Dyosa means Goddess. I find it unique and cute because that’s my dream to be a Goddess.

❶ Content

One of the challenging parts being a YouTuber is finding a right content for your channel.

You can use YouTube’s trending page this is the easiest way to find trending topic for you to have an idea of what topic or content you like. You can always use or share experiences to be your topic content whether it is beauty, make-up tutorial, DIY’s, Skin care ideas, etc. As long as you can share honestly and correctly.

Do whatever you love, do something that you like, expertise, make a relatable videos or timely videos and searchable videos. Create a content that people need or are often searched for online, content that can provide information to people. I suggest you go with “how to” videos, because people always searched for this kind of content.

Vlog Content

❷ Equipment

Gear is essential for making a YouTube video obviously a camera is the most important piece of equipment, you can use anything that can record at least 1080p resolution of video. You can use your mobile phone or a digital camera. Whatever your equipment you have now, you can start your first vlog as long as you can record a video at you have a clear audio you are good to go.

Many of the successful YouTube creators started with very simple equipment so don’t let equipment get in your way. Start your vlog now!

Vlog Equipment

❸ Skills

Vlog Editing Skills

Speaking with confident in the front of camera is always a skill of being a vlogger, you must be talkative in order for you to share more information to you viewers but make sure that your ideas are related to your chosen content.

You should be entertaining in front of the camera so that the viewers don’t get bored, because sometimes it’s not just the information that excite them to watch a vlogger, but also on how you entertain the viewers.

Entertain in Front of the Camera

❹ Editing Skils

In Editing skills, there are two ways you can edit your vlog, first on your phones, second on your pc or laptops.

You don’t have to be good at editing but this is one of the things you need to study to make your videos better.

Entertain in Front of the Camera2

Wondershare Filmora Video Editor is one of my personally used editing software, this is considered to be the best option for YouTubers because there is how-to video guide that allows anyone to quickly pick up the pace and start producing or creating an eye-catching video.

Wondershare Filmora 11 The Best video editor that makes your editing experience efficient and playful.

Try It Free Try It Free Learn More

I am using this software for almost 5 years and always satisfied by its performance. It is easy to use software with a lot of tools needed to edit a video in a fast way and it even has animation/affects you can add to your video to look more creative and catchier.

Filmora allows you to export your videos in multiple video formats with lot of customization settings.

Wondershare Filmora

It also allows you to export your videos directly to your social media platforms like YouTube, Facebook, Vimeo. The speed of exporting videos is also quite fast so not time consuming.

❺ Collaborate

It really helps your channel to grow if you collaborate with someone that is same passion as you, you can share ideas of content and help one another channel grow. Also, this will help others to know that you also have a YouTube channel and this is another way to promote your channel by the help of other content creator. In this way you can gain a friend and someone that you can seek for advice as you are starting for your career.

Wondershare Filmora

Wrap Up

• You must also remember when starting to be a vlogger you should be emotionally and mentally ready because this is not easy as you expected.
• You can earn money by doing a vlog but don’t make the money to be your motivation to be a Vlogger, ask yourself first if this is really you like or is this really your passion? because being a Vlogger comes with great responsibility and it comes with great effort.
• If you are ready to become a vlogger because of the tips I gave, you can start now but you should not expect more subscriber and views immediately because you still need a lot effort and a lot of work to get people get to know your channel. So just keep working and work hard on the content, one day you will be famous and recognized by many.

How to Upload Videos to Twitch? Here’s a Guide for Beginner

Recently, Twitch announced that its users can now upload video to Twitch, and there is no need to broadcast or live stream on Twitch anymore. Uploading videos to Twitch can be an excellent way to share your videos with your audience.

Besides this, you don’t need to upload videos on other video-sharing sites. But if you are using this platform for the first time, then you must be wondering how to upload video to Twitch. Don’t worry, as we have got your back. Keep reading to explore the process, and it is quite easy.

Part 1: How to Upload Videos to Twitch?

• First of all, you need to open Twitch in any browser. Just type twitch.tv in the browser’s address bar and click on Enter. Then you need to log into your account.
• Once done, you can see your account with your profile picture in the screen’s top-right corner. You can find it next to the Get Bits option. Click on it to access the drop-down menu.

• Then you need to choose the Video Producer option available in the drop-down menu. A new page will open, and you can see the Creator Dashboard from where you can begin uploading your video or hosting a channel on twitch. If this option is unavailable, then you can’t upload your videos.
• Now, you need to click on the upload option. If you have not uploaded any video, you will find this area blank. You can just drag and drop your desired video to upload video to twitch.

• Choose the video that you want to upload and click on the Open option.
• Now, the upload process will begin. Wait for a few seconds to finish the process. Once done, click on the video, and the details window will come up.
• Here you need to edit your video’s metadata information. You can set a title, the category and a description for your video. Besides you can also edit the language and thumbnail here.
• After that, you can click on the Save Changes option that you can find in the upper right corner.
• Now you need to click on the Publish button to post your video on your channel. You can follow the process while hosting a channel on twitch to upload the videos.

Part 2: Why can’t you upload videos to twitch?

Well, it may be noted that not all Twitch users can upload video to twitch. For now, this feature is only available for Twitch partners and affiliates. So, first, you need to become an affiliate or partner, and then you can easily upload your videos. Besides, you should also keep the video upload guidelines in mind to avoid any issues.

• You can only upload video formats like 1080P videos, videos with up to 190mbps bit rate. The platform supports FLV, MOV, AVI and MP4 file formats.
• Besides, using one account, you can upload only 5 videos simultaneously. And within 24 hours, you can do a maximum of 100 uploads.

Now you know that only Twitch partners or affiliates can upload video to twitch, it is crucial for you to know how to become a Twitch affiliate or partner. Have a look at the below-given section for your answer.

Part 3: How to be a twitch affiliate or partner?

In general, streamers on Twitch can’t earn money from their content, and they can only make money from donations. However, if you have more followers, consistent viewers and hosting a channel on twitch regularly, then you can try to become a Twitch affiliate or partner. Some benefits that you can enjoy with this are:

• You will be able to sell your games
• You can get subscriptions.
• You will enjoy chargeback protection.
• It will be easier for you to get Twitch Bits.
• You can now earn revenue through advertisements.

To become an affiliate on Twitch, first of all, you need to monetize your content, i.e., stream. Now, let’s have a look at some requirements to become an affiliate.

• You must have at least 50 followers.
• Make sure you have completed a minimum of 500 total minutes broadcast within one month or in the last 30 days.
• In the last 30 days, you should have at least seven unique broadcast days.
• At least 3 viewers per stream in the last 30 days.

Steps to Become an Affiliate

• Visit the Twitch website and log into your account.
• Find the Notifications icon and click on it.
• There you can see the Get Started option. Click on it.
• Sign the affiliate agreement and then give your tax information.
• Then choose your payment location to complete the procedure.

Requirements For Becoming a Partner

Once you receive your affiliate status, you can become a partner. But there are some requirements that you need to keep in your mind.

• You must have 75 average unique viewers per day in the last 30 days.
• Have streamed or hosting a channel on twitch for 12 days in the last 30 days.
• You need to stream for 25 hours in 30 days.

Steps to Follow

• Visit Twitch and log into your account.
• Now click on your Profile icon and then click on the Creator Dashboard option.
• Click on the arrow mark located near Insights and then click on Achievements.
• Click on the Apply option located under the Patch to Partner tab.

Once applied, Twitch will reply to your application within 7 business days. Well, if you face rejection, then you need to build a stronger audience and apply for it again later.

What Do You Mean Stay Active?

Chat is an important part of Twitch, and it lets you interact with your fellow members of the community as well as streamers. By keeping your chat active, you can let others know that you are ready to interact with them. This, in turn, can help you to increase your followers.

Part 4: What’s The Alternative to Twitch for Creators?

1. YouTube Gaming

Well, even though YouTube Gaming lacks in-game overlays, it offers other features. The platform offers live gaming broadcasts, channels, chat rooms and more. Here the viewers don’t need to subscribe to watch the content.

2. Smashcast

If you are a gaming fan, you must have heard about Hitbox and Azubu. They came together to form Smashcast. This provides the users with perfect JavaScript and HTML integration. If you are a gaming partner, esports team, viewer, organizer or streamer, then this platform will be an excellent option for you. Compared to Twitch, Smashcast offers better quality esports streams.

3. Facebook Gaming

Facebook also has introduced its own gaming and streaming platform. Facebook Gaming comes with an easy-to-navigate interface. It has a chat room and also allows you to watch videos from different social media platforms, like Twitter, Instagram, and YouTube. Besides, it offers some amazing features, such as different monetization options, interactive live-streaming, simple streaming setup, stream analytics and more.

4. DLive

While YouTube and Twitch have some high bars for monetization, they don’t offer sufficient profit to the creators. DLive is here to solve that issue. This platform rewards content creators as well as viewers. It charges a flat fee and takes around 20 percent of total revenue. On the other hand, viewers also get rewards for their engagement.

5. Ustream

This platform offers more than just gaming video streams, such as sports news, live streams, talk shows, podcasts and more. Some reviews say Ustream provides users with a better and faster streaming service. Besides, it is available for different platforms, such as PS4, Mac, Windows, iOS, and Android.

6. Vimeo

Vimeo has all the features, such as a live chat system and other features that a streaming platform must have. You can easily access its analytic dashboard to know your audience in a better way. It also has many integrations such as Figma, Meta, WordPress, Shopify and more. So, uploading videos directly from your website to Vimeo will not be a challenging task.

FAQs

How Long Do My Videos Stay on Twitch?

The answer is that it depends. If you are a Twitch Prime user, Turbo user or a Twitch partner, then once you upload video to twitch, it will stay for 60 days. For regular broadcasters, their videos will remain active for 14 days. Just follow the above-mentioned steps to successfully upload your videos.

Can I Upload Videos to Twitch?

You can upload your video to twitch if you become a Twitch affiliate or Partner. Regular streamers don’t have this feature for now. Just meet the criteria required for this and apply for an affiliate. This can be a great way to promote your brand as you can leverage this amazing form of influenced marketing.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Also read: