The Right Ways to Slow Down a Video on iPhone

Slow-motion videos are widely used for various purposes in videography or filmmaking. They not only underline the significance of a shot but also elevate creativity. The frame rate is remarkably higher in slow-motion videos than in normal videos. There are two methods included in the process of how to slow down a video on an iPhone.

The first method involves increasing the frame rate; meanwhile, the other is playback speed adjustment. This article will enfold apps to teach how to slow a video down on iPhone. All these applications will be available in the iPhone’s official App Store. However, check the compatibility of these apps with the iOS version you’re using. Ultimately, we’ll share a desktop alternative on how to slow down a video iPhone.

Slow Motion Video Maker Slow your video’s speed with better control of your keyframes to create unique cinematic effects!

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1: Pre-Recorded A Video? Adjust Slow Motion Parameters Right Away

One of the major reasons Gen Z and Gen Alpha opt for iPhones is their high-quality camera. It is ideal for capturing and editing videos in high resolution is ideal. In 2013, iPhones were integrated with the Slow-mo feature for creative purposes. Where first users needed third-party applications, they could use the built-in feature. Here is how do you slow down a video on iPhone officially:

Step 1

Locate the “Photos” application on your iPhone and launch it by simply clicking. Upon accessing the app, go to the bottom and click on “Albums.” Afterward, click the “Slo-mo” option from the expanding menu. Formerly, select a video from your device media library import.

Step 2

Once the video has been selected, navigate to the top right corner and select “Edit.”

Step 3

When the editing panel appears, navigate towards the bottom of the timeline bar. Drag the slider’s position to adjust the speed to create a slow motion. As the slow-motion effect has been created, click the “Done” button. Commencing this action will finalize your slow-motion video.

Part 2: Some Top-Notch Solutions to Slow Down Any Video on iPhone

The iPhone does offer a built-in feature to help you curate a perfect slow-mo. Nonetheless, a third-party application can offer additional and upgraded features. They offer specialized effects and filters, multiplatform support, and more. This section discusses 4 applications and how to make video slow motion iPhone using them. Find the brief introduction, capabilities, and guides of these apps below:

• SpeedPro Slow Speed Video Edit
• Slow Fast Slow – Control the Speed of Your Videos
• Slo Mo – Speed Up Video Editor
• Video Speed Editor Slow & Fast

1. SpeedPro Slow Speed Video Edit

This is an exclusive application to answer your question about how to put a video in slow motion on an iPhone. This application offers a -2x to -6x playback speed option for a slow-mo. Its intuitive feature enables speed alteration from a specific video section. This option is ideal for creatively editing your Instagram reels. Along with slowing down the speed, you can also enhance it for fast motion generation.

Key Features

• The application offers a timeline editing interface that enhances precision and accuracy.
• It possesses the ability to incorporate music in your videos using its Music feature.
• The application collaborates with social platforms like Instagram and Facebook for

Steps to Add Slow Motion in Video Using SpeedPro Slow Speed Video Edit

When you embark on a new experience, using something for the first time can be tricky. The unfamiliarity makes it harder, and one doubts its abilities. Hence, consider us your partner in guiding you on how to edit slow motion on your iPhone. We have curated a step-by-step guide to help you in creating a slow-mo:

Step 1: After downloading and accessing the application’s main menu, click the “Speed Pro” option. Then, select a video clip from your device that you desire to apply this effect to.

Step 2: Once the video clip has been selected, click the “Done” button to import.

Step 3: Afterward, you’ll be redirected to its editing interface for speed change. Navigate toward the speed slider at the bottom of the video display. Drag the slider towards the left to select a suitable playback speed option. You can also apply the slow-mo to a specific area by dragging the timeline slider.

2. Slow Fast Slow - Control the Speed of Your Videos

Use this application to record a slow-motion video or add the effect in post-production editing. This application offers a high frame rate of 240 fps for a high-grade slow-mo effect. This means you can now slow a video up to 1/16th of its original speed. It wins at creating slow motion with the iPhone’s built-in speed manipulation feature.

Key Features

• Provides audio pitch maintenance feature during speed alteration.
• Gives the option to adjust the screen ratio before editing, like square or more.
• The application is compatible with all your iOS 10.0 devices and higher versions.

Steps to Add Slow Motion in Video Using Slow Fast Slow

The encounter with an advanced tool or application is often stressful as you are unfamiliar with it. You do not want to mess up the video, so you must master an app. Following is how to slow down a video on an iPhone using the Slow Fast Slow app:

Step 1: After launching the application, give it access to your files for editing. Then, click on the “Other Videos” option to select a video from a device for slow-mo.

Step 2: Once the video has been imported, you will reach the editing interface. You’ll notice a slider with different points. These points indicate the time frames of your video. The slider is positioned downward to add a slow-mo effect at specific durations.

Step 3: Once you are done with the editing, click the play button to preview. Next, navigate towards the right-side bottom of the preview screen and hit “Export.” Select any particular resolution to save the slowed-down video on your device.

3. Slo Mo – Speed Up Video Editor

Are you looking for a versatile application about how to make a normal video slow-motion iPhone 13? Fashioned to modify a video’s speed, this app can help you. It allows users to adjust the video speed up to 12x for slow and fast motion. In addition, you can alter the video frame rate up to 240 fps at precise frames.

Key Feature

• With an additional freeze frame feature, infuse an innovative touch to videos.
• Experience a more productive workflow with its quick processing feature.
• Keeping up an accessible to all approach, the user interface is straightforward and minimal.

Steps to Add Slow Motion in Video Using Slo Mo – Speed Up Video Editor

Those initial stages of operating a new app and getting your hands on its UI are difficult. However, this article prioritizes your ease more than anything. Find our guide on how to make a video in slow motion on iPhone here:

Step 1: Upon launching the application, it will ask you for storage access. After that, you’ll have to import a video to add slow motion. Just select any normal video on your device and click on the “Next” option.

Step 2: Navigate toward the bar at the bottom of the timeline panel and select “Adjust.”

Step 3: This will feature the speed control options on your screen; go to “Advance.” Further, change the speed change slider towards the left to manipulate it. Afterward, preview the video and click on the “tick” icon.

Step 4: Further, select the “Export” icon appearing in the expanded menu.

4. Video Speed Editor Slow & Fast

How do you slow down a video on an iPhone after recording in a minimalistic way? This iPhone application is designed for such contexts to create slow-motion videos. Users can slow down a clip’s playback speed up to 8x at specific durations. Simply trim the video parts to apply the speed setting at specific sections and merge them later.

Key Features

• After slow motion, you have the option to keep the original sound or insert music offered by it.
• The timeline editing method helps you to trim the video at the right time.
• The application is compatible with iOS 12.0, iPadOS 12.0, macOS 11.0, and newer versions.

Steps to Add Slow Motion in Video Using Video Speed Editor Slow & Fast

This application has an innovative user interface with a simple operational menu. To add a slow-motion effect to a video, buy its Pro subscription first. To assist you further, here is how to slow down an iPhone video in it:

Step 1: Create a new project after launching the application and giving access to storage. Do this by clicking on the screen saying, “Tap to create a new project.”

Step 2: From the Videos section of your media, select a video and hit “Choose.”

Step 3: In the editing interface, simply select a speed option from -2x to -8x for slowing. Once the video is slowed down according to your preferences, export it.

Part 3: Failed to Slow Down Video Properly? Try Wondershare Filmora as a Remedy

Have you tried all the given solutions on how to slow-mo a video on an iPhone and are still clueless? Not getting the desired results can be frustrating, but we have brought the best answer. Wondershare Filmora helps you achieve slow motion on a computer or laptop. The software is compatible with all Windows and macOS devices. You can just connect your iPhone with the source using a cable and import media.

Being a versatile software, Filmora introduces you to two advanced methods. Uniform speed emerges as a simple method of creating a slow-motion effect. On the other hand, Speed Ramping allows you to edit speed for professional purposes. Amongst speed alteration, users can also use the frame interpolation technique. It increases video frames to ensure a smooth playback during slow-mo.

Step-by-Step Guide to Creating Slow-Motion in Filmora

If you are using Filmora for the first time, the user interface might initially seem confusing. However, in comparison to other post-production software, it possesses a minimal interface. In this section, learn about how to slo-mo a video iPhone using Filmora:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Connect iPhone and Import Clip

Once you have created a new project on Filmora, import media. First, to import media from your iPhone, connect it to your computer or related device. Then, go to “Import” > “Import from a Camera or Phone” option. Further, select the device name and import data.

Step 2Access Speed Ramping Option

Use your cursor to bring the edited media to the timeline and select it. From the appearing settings panel, access the “Speed” > “Speed Ramping” tabs. Here, either choose any of the predesigned templates or customize one.

Step 3Enable Optical Flow for Additional Touch

If the slow motion seems rough or abrupt, Filmora has a solution to that as well. Go to the “AI Frame Interpolation” section and expand it. From the expanding menu, click the “Optical Flow” option for a high-quality slow-mo.

Step 4Rendering for Final Preview

To observe the overall results, navigate towards the top toolbar. Select the “File” tab and “Render Preview” from the dropdown menu. After reviewing the final video, use your cursor to click the “Export” button.

Key Features of Wondershare Filmora

Wondershare Filmora provides a wide range of features for a full-fledged editing experience. Some of these features are for video, some are for audio, and others are for visuals. Here is a list of some of Filmora’s key features that you must give a try to:

1. Instant Mode

Once you have recorded a video, the post-production process cannot be neglected. However, when you start editing a video, the process might be confusing at first. With Filmora’s Instant Mode, use AI’s assistance to edit any video without effort. There are 115 built-in templates to integrate according to context and highlights it.

2. Green Screen

Integrate attractive backgrounds in your videos, like mountains, beaches, or more. With Filmora’s Green Screen feature, remove the video backgrounds with accuracy. After removing the background, you can insert multiple backgrounds, like solid colors. If there are backgrounds that you have previously saved, import them to the timeline. They will automatically show in the video, and you can customize them further.

3. Color Correction

Filmora offers an extensive range of color correction elements to enhance visibility. There are 40+ free presets in Filmora that you can download and apply within the app. In addition, you can do custom color settings and save them as custom presets. You can also use the 3D LUT feature to set preferences for specific factors.

4. Text-to-Speech

Another important feature that helps with interactive video creation is text-to-speech. It allows users to transform text into speech with voice selection options. The software has been trained on NLP and integrates realistic voices in videos. Being closer to the human voice helps with better audience interaction and understanding.

Conclusion

The main theme of this article was how to slow down a video on iPhone and the tools to do it. We mentioned 4 applications that are compatible with higher versions of the iPhone. In addition, the article provided detailed guides on all these applications.

Among them, Wondershare Filmora has been integrated with an advanced slow-mo feature. It allows a seamless and professional user interface to import, edit, and customize. The AI Optical Flow in it adds a remarkable fine touch to your slow-mo video.

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1: Pre-Recorded A Video? Adjust Slow Motion Parameters Right Away

One of the major reasons Gen Z and Gen Alpha opt for iPhones is their high-quality camera. It is ideal for capturing and editing videos in high resolution is ideal. In 2013, iPhones were integrated with the Slow-mo feature for creative purposes. Where first users needed third-party applications, they could use the built-in feature. Here is how do you slow down a video on iPhone officially:

Step 1

Locate the “Photos” application on your iPhone and launch it by simply clicking. Upon accessing the app, go to the bottom and click on “Albums.” Afterward, click the “Slo-mo” option from the expanding menu. Formerly, select a video from your device media library import.

Step 2

Once the video has been selected, navigate to the top right corner and select “Edit.”

Step 3

When the editing panel appears, navigate towards the bottom of the timeline bar. Drag the slider’s position to adjust the speed to create a slow motion. As the slow-motion effect has been created, click the “Done” button. Commencing this action will finalize your slow-motion video.

Part 2: Some Top-Notch Solutions to Slow Down Any Video on iPhone

The iPhone does offer a built-in feature to help you curate a perfect slow-mo. Nonetheless, a third-party application can offer additional and upgraded features. They offer specialized effects and filters, multiplatform support, and more. This section discusses 4 applications and how to make video slow motion iPhone using them. Find the brief introduction, capabilities, and guides of these apps below:

• SpeedPro Slow Speed Video Edit
• Slow Fast Slow – Control the Speed of Your Videos
• Slo Mo – Speed Up Video Editor
• Video Speed Editor Slow & Fast

1. SpeedPro Slow Speed Video Edit

This is an exclusive application to answer your question about how to put a video in slow motion on an iPhone. This application offers a -2x to -6x playback speed option for a slow-mo. Its intuitive feature enables speed alteration from a specific video section. This option is ideal for creatively editing your Instagram reels. Along with slowing down the speed, you can also enhance it for fast motion generation.

Key Features

• The application offers a timeline editing interface that enhances precision and accuracy.
• It possesses the ability to incorporate music in your videos using its Music feature.
• The application collaborates with social platforms like Instagram and Facebook for

Steps to Add Slow Motion in Video Using SpeedPro Slow Speed Video Edit

When you embark on a new experience, using something for the first time can be tricky. The unfamiliarity makes it harder, and one doubts its abilities. Hence, consider us your partner in guiding you on how to edit slow motion on your iPhone. We have curated a step-by-step guide to help you in creating a slow-mo:

Step 1: After downloading and accessing the application’s main menu, click the “Speed Pro” option. Then, select a video clip from your device that you desire to apply this effect to.

Step 2: Once the video clip has been selected, click the “Done” button to import.

Step 3: Afterward, you’ll be redirected to its editing interface for speed change. Navigate toward the speed slider at the bottom of the video display. Drag the slider towards the left to select a suitable playback speed option. You can also apply the slow-mo to a specific area by dragging the timeline slider.

2. Slow Fast Slow - Control the Speed of Your Videos

Use this application to record a slow-motion video or add the effect in post-production editing. This application offers a high frame rate of 240 fps for a high-grade slow-mo effect. This means you can now slow a video up to 1/16th of its original speed. It wins at creating slow motion with the iPhone’s built-in speed manipulation feature.

Key Features

• Provides audio pitch maintenance feature during speed alteration.
• Gives the option to adjust the screen ratio before editing, like square or more.
• The application is compatible with all your iOS 10.0 devices and higher versions.

Steps to Add Slow Motion in Video Using Slow Fast Slow

The encounter with an advanced tool or application is often stressful as you are unfamiliar with it. You do not want to mess up the video, so you must master an app. Following is how to slow down a video on an iPhone using the Slow Fast Slow app:

Step 1: After launching the application, give it access to your files for editing. Then, click on the “Other Videos” option to select a video from a device for slow-mo.

Step 2: Once the video has been imported, you will reach the editing interface. You’ll notice a slider with different points. These points indicate the time frames of your video. The slider is positioned downward to add a slow-mo effect at specific durations.

Step 3: Once you are done with the editing, click the play button to preview. Next, navigate towards the right-side bottom of the preview screen and hit “Export.” Select any particular resolution to save the slowed-down video on your device.

3. Slo Mo – Speed Up Video Editor

Are you looking for a versatile application about how to make a normal video slow-motion iPhone 13? Fashioned to modify a video’s speed, this app can help you. It allows users to adjust the video speed up to 12x for slow and fast motion. In addition, you can alter the video frame rate up to 240 fps at precise frames.

Key Feature

• With an additional freeze frame feature, infuse an innovative touch to videos.
• Experience a more productive workflow with its quick processing feature.
• Keeping up an accessible to all approach, the user interface is straightforward and minimal.

Steps to Add Slow Motion in Video Using Slo Mo – Speed Up Video Editor

Those initial stages of operating a new app and getting your hands on its UI are difficult. However, this article prioritizes your ease more than anything. Find our guide on how to make a video in slow motion on iPhone here:

Step 1: Upon launching the application, it will ask you for storage access. After that, you’ll have to import a video to add slow motion. Just select any normal video on your device and click on the “Next” option.

Step 2: Navigate toward the bar at the bottom of the timeline panel and select “Adjust.”

Step 3: This will feature the speed control options on your screen; go to “Advance.” Further, change the speed change slider towards the left to manipulate it. Afterward, preview the video and click on the “tick” icon.

Step 4: Further, select the “Export” icon appearing in the expanded menu.

4. Video Speed Editor Slow & Fast

How do you slow down a video on an iPhone after recording in a minimalistic way? This iPhone application is designed for such contexts to create slow-motion videos. Users can slow down a clip’s playback speed up to 8x at specific durations. Simply trim the video parts to apply the speed setting at specific sections and merge them later.

Key Features

• After slow motion, you have the option to keep the original sound or insert music offered by it.
• The timeline editing method helps you to trim the video at the right time.
• The application is compatible with iOS 12.0, iPadOS 12.0, macOS 11.0, and newer versions.

Steps to Add Slow Motion in Video Using Video Speed Editor Slow & Fast

This application has an innovative user interface with a simple operational menu. To add a slow-motion effect to a video, buy its Pro subscription first. To assist you further, here is how to slow down an iPhone video in it:

Step 1: Create a new project after launching the application and giving access to storage. Do this by clicking on the screen saying, “Tap to create a new project.”

Step 2: From the Videos section of your media, select a video and hit “Choose.”

Step 3: In the editing interface, simply select a speed option from -2x to -8x for slowing. Once the video is slowed down according to your preferences, export it.

Part 3: Failed to Slow Down Video Properly? Try Wondershare Filmora as a Remedy

Have you tried all the given solutions on how to slow-mo a video on an iPhone and are still clueless? Not getting the desired results can be frustrating, but we have brought the best answer. Wondershare Filmora helps you achieve slow motion on a computer or laptop. The software is compatible with all Windows and macOS devices. You can just connect your iPhone with the source using a cable and import media.

Being a versatile software, Filmora introduces you to two advanced methods. Uniform speed emerges as a simple method of creating a slow-motion effect. On the other hand, Speed Ramping allows you to edit speed for professional purposes. Amongst speed alteration, users can also use the frame interpolation technique. It increases video frames to ensure a smooth playback during slow-mo.

Step-by-Step Guide to Creating Slow-Motion in Filmora

If you are using Filmora for the first time, the user interface might initially seem confusing. However, in comparison to other post-production software, it possesses a minimal interface. In this section, learn about how to slo-mo a video iPhone using Filmora:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Connect iPhone and Import Clip

Once you have created a new project on Filmora, import media. First, to import media from your iPhone, connect it to your computer or related device. Then, go to “Import” > “Import from a Camera or Phone” option. Further, select the device name and import data.

Step 2Access Speed Ramping Option

Use your cursor to bring the edited media to the timeline and select it. From the appearing settings panel, access the “Speed” > “Speed Ramping” tabs. Here, either choose any of the predesigned templates or customize one.

Step 3Enable Optical Flow for Additional Touch

If the slow motion seems rough or abrupt, Filmora has a solution to that as well. Go to the “AI Frame Interpolation” section and expand it. From the expanding menu, click the “Optical Flow” option for a high-quality slow-mo.

Step 4Rendering for Final Preview

To observe the overall results, navigate towards the top toolbar. Select the “File” tab and “Render Preview” from the dropdown menu. After reviewing the final video, use your cursor to click the “Export” button.

Key Features of Wondershare Filmora

Wondershare Filmora provides a wide range of features for a full-fledged editing experience. Some of these features are for video, some are for audio, and others are for visuals. Here is a list of some of Filmora’s key features that you must give a try to:

1. Instant Mode

Once you have recorded a video, the post-production process cannot be neglected. However, when you start editing a video, the process might be confusing at first. With Filmora’s Instant Mode, use AI’s assistance to edit any video without effort. There are 115 built-in templates to integrate according to context and highlights it.

2. Green Screen

Integrate attractive backgrounds in your videos, like mountains, beaches, or more. With Filmora’s Green Screen feature, remove the video backgrounds with accuracy. After removing the background, you can insert multiple backgrounds, like solid colors. If there are backgrounds that you have previously saved, import them to the timeline. They will automatically show in the video, and you can customize them further.

3. Color Correction

Filmora offers an extensive range of color correction elements to enhance visibility. There are 40+ free presets in Filmora that you can download and apply within the app. In addition, you can do custom color settings and save them as custom presets. You can also use the 3D LUT feature to set preferences for specific factors.

4. Text-to-Speech

Another important feature that helps with interactive video creation is text-to-speech. It allows users to transform text into speech with voice selection options. The software has been trained on NLP and integrates realistic voices in videos. Being closer to the human voice helps with better audience interaction and understanding.

Conclusion

The main theme of this article was how to slow down a video on iPhone and the tools to do it. We mentioned 4 applications that are compatible with higher versions of the iPhone. In addition, the article provided detailed guides on all these applications.

Among them, Wondershare Filmora has been integrated with an advanced slow-mo feature. It allows a seamless and professional user interface to import, edit, and customize. The AI Optical Flow in it adds a remarkable fine touch to your slow-mo video.

Best 5 Tools to Help You Know More Freeze-Frame Video Editing Skills

Best 5 Tools to Help You Know More Freeze Frame Video Editing Skills

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

Try It Free Try It Free

The freeze-frame video editing effect is a technique used to stop the moving image of a video and hold it still onscreen. This effect aims to pause the world the video is living in and allow the audience to process the scene and gain more context fully. Note that the world around us keeps ongoing, and time never stops. But luckily for us, we can pause film and video with a simple but powerful video effect known as the freeze-frame.

In addition, a freeze-frame can be carried out in a video to showcase a specific frame in your clip by extending the length of Time that frame is displayed. For example, you can decide to freeze a frame to show the video frame where a goal is being scored in a sporting event or use it to showcase a captured reaction or a smile. When a freeze-frame applies to a video clip, the clip automatically splits at the freezing point, and the chosen frame is inserted as an image file (BMP) and displayed on screen for the duration you set. This article will teach how to use the freeze-frame editing service ideally.

In this article

01 [How to Add a Freeze-frame to Video Clips in all Tools](#Part 1)

02 [SUPER COOL Freeze-frame Effect with Filmora 11](#Part 2)

Part 1 How to Add a Freeze-frame to Video Clips in all Tools

Do you want to draw your audience’s attention to a point or for dramatic flair by stopping your video and holding on to a single frame? This section will give you the best tools for freeze-frame editing via a step-by-step guide on how to do it.

01After Effects

Here is a step-by-step guide on how to Freeze-frame in After Effects:

Step 1: Download After Effects

Download and install Adobe After Effects and open it on your desktop. This software works with both macOS and Windows.

Step 2: New Composition

Next is to open a new project or drag and drop your video and add it to the timeline. Another way is to click on “New Composition from Footage” and then browse the video you want to edit.

Step 3: Select the Frame

There is a Playhead or slider above the slide, which will help you to select the frame needed to be frozen. Press the “Space bar” to play and pause the video. Then, with the help of the slider, select the frame and pause the video at that instant.

Step 4: Create a New Layer

After you pause the video at the place you want to freeze, Press “Ctrl + Shift + D” to cut the video at that instant, then another layer of the video will add just after the moment.

Step 5: Freeze the Frame

Next is to right-click on the layer, and the settings will pop up. Go to Time> Freeze-frame, and your selected frame will get frozen.

Step 6: Save the Video

Finally, go to File > Export to save the video per your PC requirement.

02**Wondershare Filmora Video Editor **

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Here is a step-by-step guide on how to Freeze-frame in Wondershare Filmora:

Step 1: Import your media files

After installing the software on your PC, drag and drop all files into the primary window or click on “Import” to browse your file folder. Also, this program supports a variety of media files, including MP4, MKV, WMV, MOV, DV, AVI, MTS, TS, 3GP, M4V, etc. After uploading the video, drag them to the Video Timeline.

Step 2: Freeze video with ease

Now play the video clip you want to add freeze-frame and pause it when it comes to the correct position. Then click the “Snapshot” icon under the Viewer panel. Immediately, a picture will add to the media library. Drag and drop the Picture to the PIP track over the main video track, and set the duration of the still image.

Step 3: Save your video

When satisfied with your result, click “Export” to export your video. In the pop-up window that appears, please select the file format options to save onto your computer, or you can directly upload it to Twitter, YouTube, or Facebook, to share with your family and friends.

03Premiere Pro

Here is a step-by-step guide on how to Freeze-frame in Premiere Pro using a video frame for the duration of a clip:

Step 1: Download Premiere Pro

Download and install Adobe Premiere Pro on your PC and open it to start editing your video. Import video to Premiere Pro and drag and drop to the timeline.

Step 2: Select a clip in a Timeline panel.

To freeze a frame using other methods than the In or Out point, open the video portion in the Source Monitor, and set the Marker 0 (zero) to the frame you wish to pause in the video.

Step 3: Choose Clip > Video Options > Frame Hold.

Next is to tap Hold On and select the frame you want to hold from the menu. However, you can choose the frame based on Source Timecode, In Point, Out Point, Sequence Timecode, or Playhead position.

Step 4: Finally, specify “Hold Filters” and click OK.

Effect settings use the values at the holding frame to prevent keyframed effect settings (if any are present) from animating during the clip’s duration.

04Kapwing

Step 1: Upload and edit your video with Kapwing.

Choose to “Get Started,” upload a file from your device, or paste a video link from a third-party site like YouTube, Vimeo, or TikTok. In any case, you’ll be whisked away to your very own video editing studio.

Step 2: Give your video a freeze-frame effect.

Select the “Timing” tab in the right navigation bar and click “Freeze Frame” after uploading your video to Kapwing.

In Kapwing, you may add a freeze-frame to a video.

As you can see, clicking “Freeze Frame” instantly creates an image layer for the frame your timeline slider was on. Click on the image layer and choose from the “Duration” dropdown option under the “Edit” tab in the right navigation bar to change the length of the freeze-frame. Alternatively, you may drag the image layer onto your timeline by clicking and dragging it.

That’s all there is to it!

05Animotica

Step 1: Creating a New Project

To begin, open your video editor and select Create a New Project. Choose Empty Project, give your project a name, and click the Create a New Project button.

Step 2: Selecting the Video to Freeze

Select Add Video/Photo Clips from the drop-down menu.

You can add video clips to Animotica by navigating to where you saved your video clip, selecting it, and opening it. You’ll now return to the project window, where your video will display. You can enable a wide range of enhancing options by tapping on the video clip with your mouse.

Step 3: The Freeze Effect

To activate your options, tap on the video clip. You must now decide which segment of the video you want to freeze. To make things easy for you, press the play and pause buttons when you reach the part you want to freeze.

Take a picture of the video by dragging your pointer down to the camera icon and pressing it to take a photo while keeping the clip paused, where you want it to be frozen. When you do that, a menu of three options will appear; select Take Snapshots and Insert in Current Position. This choice will split the movie in half and insert the scene you just recorded in the middle, resulting in a freeze.

Part 2 SUPER COOL Freeze-frame Effect with Filmora 11

With no prior experience in video editing, you may get started right away.

Filmora 11 is a scalable experience built for new and seasoned content creators who want freeze-frame editing. You may start cutting and editing your videos like an expert, even if you’re a beginner, and access anything you need from the toolbar once the software launches on your computer, including media, audio, titles, effects, split-screen formatting, elements, and transitions.

Hundreds of extra alternatives are available for each of these elements, which you can drag and drop over your chosen film. You can also use the scissors symbol to cut the movie by pausing on a specific frame within your shot and clicking it. Filmora 11 also comes with pre-set aspect ratios and resolutions for your chosen media to get started right away.

● Ending Thoughts →

● This article provided users with a guide to using Mac and Windows video editor freeze-frame for your video effects. Aside from the editor listed here, Movavi video editor freeze-frame and other editors are available on the Internet.

● However, the ones listed in this blog are our top picks for the best you can use. In addition, Filmora is the best freeze-frame effect editor with a lot of effects you can use in your video editing

How To Export Video in Filmora

After you edit your video with Filmora you may wonder how to export your video in Filmora Indeed, you can export your video in Filmora in various options. This article will show you the multiple options you can get if you want to export your video in Filmora.

Steps to export your video with Filmora

To open the export box, press “CTRL+E” on your keyboard. After that, you’ll see many export options you can do.

Export Video Platform

If you want your video to end up on YouTube, you can click on the “YouTube” option, sign in, and enter all the basic metadata you need for your YouTube video. Then you can click “Export”, and the video will go straight to YouTube. Also, you can have all of your privacy settings, descriptions, and everything else.

Similar to YouTube, you can do the same thing if you want to export your video on Vimeo.

Export and Burn Video into DVD

You can also directly burn your video to a DVD. Even though video to DVD isn’t as common as it used to be, it’s still nice to be able to do it, especially if you like making DVDs.

Export Video to Other Devices

Go to the “Devices” option if you want to export your video to specific devices with everything looking good on that particular device. For instance, if you want to export your video to iPhone, you can see the size will be 41MB, and the resolution will be 1080p. All those things are going to look much better on an iPhone.

You can also adjust the quality of your video based on your needs by clicking on “Setting.”

Export Videos in High Res Quality

In the “Format” option you can choose the file extension, the format, or the codec. Exporting your video based on format is good if you prefer to save your video on your computer since maybe you may upload your video on YouTube, Instagram or other social media platforms.

You can choose “Apple Prores” if you want the least amount of compression possible and don’t care about the file size. For example, if you want to export a video from Filmora and then import it into another video editor without losing too much quality, you should definitely choose “Apple Prores.”

Before exporting, there is the option to upload to the cloud. If you do not know what it is, Wondershare has its own Drive, which allows you to save and remotely view your video files.

In the meantime, if you have a decent PC, you can enable “Hardware acceleration for video encoding.” This option will utilize as much computer power as you have to export the video and make the process significantly faster. Once everything is finished, click “Export.”

When you click Export, you can see the progress with thumbnails and everything. Lastly, your video has been exported successfully when the exporting process reaches 100%.

Summary

Indeed, there are many options to export your video using Filmora. If you wish to export your video directly to YouTube, simply select the YouTube option in the Export box. Meanwhile, if you want to export your video on your computer and upload it to various social media platforms, it’s much better to export it with a format option.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later Free Download For macOS 10.14 or later Free Download For macOS 10.14 or later

Convert Time-Lapse to Normal Video

Ever since video cameras were invented, there have been various technological advancements in filming. And today people generally use smartphones or portable cameras to record videos. But one of the interesting ways in which smart devices can capture moments is using the timelapse feature. Timelapse files are a way of videography in which the camera or smart device captures frames in intervals of a few seconds or minutes.

In this way, you get a stop motion-like video at the end. This format of the video is both interesting and can be used to capture long hours of activities. But often we are needed to convert time-lapse to normal video to export or share them over a platform. For these requirements, there are different applications available across multiple operating systems.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Try It Free >>

Part 1. Convert Time-lapse Video to Normal on Computer

Computer users aiming to conserve the value of their time-lapses as videos can resort to Filmora . The Filmora program is a fee-based software that furnishes very productive video editing capacities. As an alternative, one can choose its trial edition for free. Here is how to turn your time lapses into videos by means of Filmora:

First, go to the official website of Filmora and then click on “Try Filmora for free”. This will start the download of the Filmora trial version. For converting time-lapses into normal videos, the premium version is not necessary. After the application is downloaded and installed on your PC, open it by clicking its icon.

Wondershare Filmora Easily convert time-lapse video to normal speed on PC and Mac.

Free Download Free Download Learn More

Try It Free >>

When the Filmora interface opens, you will need to go to “project” and then select “New project”. This will create a new project for you. Alternatively, you can click on the “+” icon available on the screen to do the same. After a new project is opened, you need to click on “Import” to add the timelapse file you want to convert.

Then from the tools menu, select the “Tools” option on the top of your screen. Here you will be able to access different features of Filmora. Click on the option that says “Speed” to go to speed settings. Change the speed from 1X to a lower speed by toggling across the drag bar.

After setting a preferred speed for your timelapse, you will notice that the timelapse will seem like a normal video. When you are satisfied with the preview video, go to “Export” and click on it. This will save your converted video to your device in the highest resolution. Then you will be able to share it instantly on any platform.

Part 2. Change Timelapse Video to Normal on iPhone

If you are an iPhone user then you must have discovered the timelapse feature which is present in the camera app. Using the camera app, Apple users have the choice to make stunning time lapses with customized duration and settings.

And if you have a timelapse that you want to convert to a normal video format, then you can follow these steps on how to convert time-lapse to normal video:

• There are multiple ways and applications to convert timelapse videos to normal ones on iPhone. But the safest and most effective way to do that is by using iMovie. This application is mostly preinstalled on all iPhones and is free to use. If somehow you are missing this app, then visit the Apple store and install it on your device.
• When iMovie is successfully installed on your iPhone, open the application and allow all the permissions that it asks for. Then click on the “+” icon in the middle of your screen to create a new project. If you want you can name your project when its created.
• After opening your new project, you can tap on the “Import” option to add media files to the interface. Here it will open your files from which you will need to select the timelapse video that you want to edit. Click on it and it will be automatically added to iMovie.
• You can also add multiple timelapse videos if you want to convert them all and merge them into one file. Then on the iMovie interface, there will be a timeline available at the bottom of your screen. You can adjust it to trim, replace or rearrange the clips.
• Then on the bottom left corner of your screen, you will see a “speed” icon which is generally the second tool on the interface. Click on it and it will open the playback speed controls for you. Adjusting and dragging on the speed control, you will be able to change the playback speed of the timelapse.
• You will need to slow down the playback speed by toggling the speed controls. Set it to a speed lower than 1X which can make it look like a normal video. When you are done, click on the tick mark to save the changes.
• Now preview the video and make sure you are satisfied with the conversion. Then go to settings, and customize the video output settings as well as quality. When you are done with these changes, click on the “Export” option to save the video to your device or share it on any platform.

Part 3. Time-lapse to Normal Video Online

There are situations where users don’t want to go installing extra applications when it comes to executing a task. And if you happen to be such a user who wants to convert your timelapse into a beautiful video, then you can do it online for free. Veed.io is an online platform that allows users to upload and convert time-lapse to normal video online easily.

First, open your browser and enter “veed.io” i.e. “time-lapse to normal video converter online” in your search box. Then the first result that will be shown will be from its official website. Click on that and you will be directed to the veed.io online interface.

The interface will have different options like “Sign Up, “Try Sample” etc. From the available options, click on “Upload Your Video”. This will allow you to edit your videos without even creating an account.

Then the interface will direct you to the video creation page. Here you will see a bunch of predefined templates to make videos. Click on the “Create Template” option and the interface will have a “Upload Your Media” box on the screen. Here you can click on it and select your timelapse file or drag and drop it from any source.

After the video is added to the veed.io page, it will take some time to upload it to the project menu. You can add multiple files by clicking on the “Add” option available on the screen. After a short while, you will see the video preview on the screen along with a timeline of the video.

Click on the timeline feature and there will be different tools from veed.io available at the bottom of the interface. Select the speedometer type icon on the screen and this will give you access to control the playback speed of timelapse.

You can drag the cursor from 1X to any desired speed here. Just click on the drag button and lower the speed below 1X to a desirable speed of your choice. In the preview window, check how the video is being rendered.

When you are satisfied with the changes and the video speed seems normal to you, go to the top right corner of the screen and click on the “Export” option. This will ask you to set your preferences for different video settings. Change them according to your requirement and then the video will be downloaded to your device.

Wondershare Filmora Easily convert time-lapse video to normal speed on PC and Mac.

Free Download Free Download Learn More

Try It Free >>

Conclusion

Time lapses are an amazing way to capture moments from any device. But there are situations where we need to convert them into video format for our requirements. Luckily there are some built-in features in different smartphone devices as well as applications available on others that can help you to do so. We have discussed some of these methods following which you will easily be able to convert your timelapse into videos on any device.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Try It Free >>

Part 1. Convert Time-lapse Video to Normal on Computer

Computer users aiming to conserve the value of their time-lapses as videos can resort to Filmora . The Filmora program is a fee-based software that furnishes very productive video editing capacities. As an alternative, one can choose its trial edition for free. Here is how to turn your time lapses into videos by means of Filmora:

First, go to the official website of Filmora and then click on “Try Filmora for free”. This will start the download of the Filmora trial version. For converting time-lapses into normal videos, the premium version is not necessary. After the application is downloaded and installed on your PC, open it by clicking its icon.

Wondershare Filmora Easily convert time-lapse video to normal speed on PC and Mac.

Free Download Free Download Learn More

Try It Free >>

When the Filmora interface opens, you will need to go to “project” and then select “New project”. This will create a new project for you. Alternatively, you can click on the “+” icon available on the screen to do the same. After a new project is opened, you need to click on “Import” to add the timelapse file you want to convert.

Then from the tools menu, select the “Tools” option on the top of your screen. Here you will be able to access different features of Filmora. Click on the option that says “Speed” to go to speed settings. Change the speed from 1X to a lower speed by toggling across the drag bar.

After setting a preferred speed for your timelapse, you will notice that the timelapse will seem like a normal video. When you are satisfied with the preview video, go to “Export” and click on it. This will save your converted video to your device in the highest resolution. Then you will be able to share it instantly on any platform.

Part 2. Change Timelapse Video to Normal on iPhone

If you are an iPhone user then you must have discovered the timelapse feature which is present in the camera app. Using the camera app, Apple users have the choice to make stunning time lapses with customized duration and settings.

And if you have a timelapse that you want to convert to a normal video format, then you can follow these steps on how to convert time-lapse to normal video:

• There are multiple ways and applications to convert timelapse videos to normal ones on iPhone. But the safest and most effective way to do that is by using iMovie. This application is mostly preinstalled on all iPhones and is free to use. If somehow you are missing this app, then visit the Apple store and install it on your device.
• When iMovie is successfully installed on your iPhone, open the application and allow all the permissions that it asks for. Then click on the “+” icon in the middle of your screen to create a new project. If you want you can name your project when its created.
• After opening your new project, you can tap on the “Import” option to add media files to the interface. Here it will open your files from which you will need to select the timelapse video that you want to edit. Click on it and it will be automatically added to iMovie.
• You can also add multiple timelapse videos if you want to convert them all and merge them into one file. Then on the iMovie interface, there will be a timeline available at the bottom of your screen. You can adjust it to trim, replace or rearrange the clips.
• Then on the bottom left corner of your screen, you will see a “speed” icon which is generally the second tool on the interface. Click on it and it will open the playback speed controls for you. Adjusting and dragging on the speed control, you will be able to change the playback speed of the timelapse.
• You will need to slow down the playback speed by toggling the speed controls. Set it to a speed lower than 1X which can make it look like a normal video. When you are done, click on the tick mark to save the changes.
• Now preview the video and make sure you are satisfied with the conversion. Then go to settings, and customize the video output settings as well as quality. When you are done with these changes, click on the “Export” option to save the video to your device or share it on any platform.

Part 3. Time-lapse to Normal Video Online

There are situations where users don’t want to go installing extra applications when it comes to executing a task. And if you happen to be such a user who wants to convert your timelapse into a beautiful video, then you can do it online for free. Veed.io is an online platform that allows users to upload and convert time-lapse to normal video online easily.

First, open your browser and enter “veed.io” i.e. “time-lapse to normal video converter online” in your search box. Then the first result that will be shown will be from its official website. Click on that and you will be directed to the veed.io online interface.

The interface will have different options like “Sign Up, “Try Sample” etc. From the available options, click on “Upload Your Video”. This will allow you to edit your videos without even creating an account.

Then the interface will direct you to the video creation page. Here you will see a bunch of predefined templates to make videos. Click on the “Create Template” option and the interface will have a “Upload Your Media” box on the screen. Here you can click on it and select your timelapse file or drag and drop it from any source.

After the video is added to the veed.io page, it will take some time to upload it to the project menu. You can add multiple files by clicking on the “Add” option available on the screen. After a short while, you will see the video preview on the screen along with a timeline of the video.

Click on the timeline feature and there will be different tools from veed.io available at the bottom of the interface. Select the speedometer type icon on the screen and this will give you access to control the playback speed of timelapse.

You can drag the cursor from 1X to any desired speed here. Just click on the drag button and lower the speed below 1X to a desirable speed of your choice. In the preview window, check how the video is being rendered.

When you are satisfied with the changes and the video speed seems normal to you, go to the top right corner of the screen and click on the “Export” option. This will ask you to set your preferences for different video settings. Change them according to your requirement and then the video will be downloaded to your device.

Wondershare Filmora Easily convert time-lapse video to normal speed on PC and Mac.

Free Download Free Download Learn More

Try It Free >>

Conclusion

Time lapses are an amazing way to capture moments from any device. But there are situations where we need to convert them into video format for our requirements. Luckily there are some built-in features in different smartphone devices as well as applications available on others that can help you to do so. We have discussed some of these methods following which you will easily be able to convert your timelapse into videos on any device.

Also read: