Create Chroma Key Written Text Effects in Filmora

Did you know it only takes a few clicks to key out the color in Filmora? It means that you can add green screen effects to many other objects. This article will show a cool chroma key effect you can try using written text.

Part 1. What Is Chroma Key Text Effect?

Composing of the chroma key effect is widely used in the gaming and newscasting industries. In this technique, you can make layering images and videos for the text together based on color hues.

Video editors can eliminate the basis from a picture by automatically choosing a certain hue in post-production. An interactive animation results by adding different color schemes; it’s an easy way to make 3D motion videos.

To make the effects on text, we have to film the subject writing on white paper. For this, follow the below instructions:

Part 2. Filming Tips for Written Texts

To write a key text before adding the chroma effect, we have to film the writing process to understand your next project better. You can create your own by following these tips. We are just concluding a single example here.

Tip 1. A Pen and a White Paper

We need blank white paper with no boundaries and lines for writing a text. Because the chroma effect will embellish the other lines if present on paper. Make sure to choose a prominent color for writing a text.

We are using a purple color pen here for writing an essential text to make it more prominent, as shown below:

It all depends upon the contrast, and you can choose another color too but ensure that it’s more apparent during filming.

Tip 2. Different Color Paper

There are many chances that you don’t have only white paper in your studio, or your requirement is not going with a blank white sheet. Then you don’t need to worry because you can use different color papers too.

But always try to use clearer paper and a prominent pen or highlighter. See the below example of a different color paper with a different highlighter.

Note: Ensure that the colored pens have good contrast with colored paper. Don’t use dull color pens with bright color paper.

Tip 3. Camera Angles

While filming a writing process for a video, you have to take care of the alignment of the camera. First, ensure the camera is at a suitable angle so it will not block the writing letters from the left side.

Sometimes, the writer’s hand blocks the letters on the left side during writing. Take note of this tip during filming a professional video, as shown below.

After checking the alignment of the camera, it’s time to look at what size we have to use for writing!

Tip 4. Larger Size of Letters

As we already said about the prominence of written text, we have to follow one more instruction related to the structure of the letters. Use the larger size and bold words when writing from a highlighter.

It is because the effect we insert during editing will be more standing and give a professional look to the video.

Note: You can create more shots till you get the right angle for a final video. Just focus on the camera alignment and highlighted words, then it will be all set.

After filming all the clips, you must edit those shots on the Filmora to get the chroma effect. Scroll more to get the step-by-step process!

Part 3. Editing the Chroma Key Text With Filmora

We need software that will give great setting choices and stock videos for a more professional look. For this, Wondershare Filmora will work more than a robot and give high-resolution results. To do the editing process on Filmora, follow the steps below and enjoy yourself with your followers.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora

Launch Wondershare Filmora on your PC or Mac after downloading.

Note: If you want to enjoy its unlimited effect, you get its premium version quickly.

Step2 Import the clips to the Filmora

First, import the best footage into the filmora which you have shot. Ensure that the clip should have the best recording angle and that every word will be prominent on the page.

For this, click on Import Media and choose from the PC library what you want to edit.

Step3 Drag the clip to the timeline

Drag and drop the clip into the timeline from the import section. If you have more clips, choose first according to your script.

Add the text-written clip into the second video track because we have to insert the background into the first video track later.

After inserting the clip into the timeline, it’s time to edit it. For this, keep following the below-mentioned steps!

Step4 Chroma key settings

To edit the chroma key, you need to open the settings. For this, follow the below instructions:

• First, double-click on the clip in the timeline of the Filmora.
• Then, the setting section of the video will pop up at the top left side.
• Mark the tick in front of the Chroma Key section, and it will show the list of different features as shown below.

Step5 Color key out

To key out the specific color for changing its background, you have to perform the following actions:

• First, find the Select color option in the settings of the clip.
• Then click on the color dropper in front of the color tab.
• After that, pick the color dropper and move it on the video to select the color from the text.

Note: Ensure to select the color from the middle of the text for better key-out accuracy.

You have to adjust the size and thickness after selecting the key-out. For this, follow the next step!

Step6 Adjust the settings

To adjust the Chroma Key’s settings, set the offset, tolerance, edge thickness, and edge feather. Increase or decrease according to your range and that suits you the best.

Then click on Alpha Channel to mark the tick in front of the option. It is due to that chroma key effects will be more clearly shown.

Now, it’s time to set the background after fixing all the settings of the chroma key effect. To perform this, scroll more to get to the next step.

Step7 Import background clips

You have to add an excellent motion background in the handwritten text video. For this, you must first import the background clip into the filmora. Then, click on Import Media and choose what you want from your PC.

Step8 Add a background clip to the timeline

After importing the background clip, now drag and drop the clip into the timeline. Finally, add the background clip to the first video track at the bottom.

Step9 Turn off the alpha channel

The last step is merging the background clip with the first clip. For this, follow the below guidelines:

• First, double-click on the handwritten text video.
• It will show the settings section at the top left corner.
• Find the chroma key section and turn Alpha Channel

Final Results

You have all done with the steps and got such a fascinating result. Following the above tricks, you can easily make your vlogs and daily videos more professional and creative. Make sure to add a great and colorful background clip.

You can also use any other motion video of scenes rather than colorful videos to give a striking look.

Conclusion

Create more attractive looks and share them with your subscribers. Mainly, vloggers can attract many viewers by making the introductory part with this effect. Then, choose hundreds of other videos from the stock media and create different looks daily.

See how you can get editing tricks on Wondershare Filmora and use them in a few clicks to get an attractive look!

Tip 3. Camera Angles

While filming a writing process for a video, you have to take care of the alignment of the camera. First, ensure the camera is at a suitable angle so it will not block the writing letters from the left side.

Sometimes, the writer’s hand blocks the letters on the left side during writing. Take note of this tip during filming a professional video, as shown below.

After checking the alignment of the camera, it’s time to look at what size we have to use for writing!

Tip 4. Larger Size of Letters

As we already said about the prominence of written text, we have to follow one more instruction related to the structure of the letters. Use the larger size and bold words when writing from a highlighter.

It is because the effect we insert during editing will be more standing and give a professional look to the video.

Note: You can create more shots till you get the right angle for a final video. Just focus on the camera alignment and highlighted words, then it will be all set.

After filming all the clips, you must edit those shots on the Filmora to get the chroma effect. Scroll more to get the step-by-step process!

Part 3. Editing the Chroma Key Text With Filmora

We need software that will give great setting choices and stock videos for a more professional look. For this, Wondershare Filmora will work more than a robot and give high-resolution results. To do the editing process on Filmora, follow the steps below and enjoy yourself with your followers.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora

Launch Wondershare Filmora on your PC or Mac after downloading.

Note: If you want to enjoy its unlimited effect, you get its premium version quickly.

Step2 Import the clips to the Filmora

First, import the best footage into the filmora which you have shot. Ensure that the clip should have the best recording angle and that every word will be prominent on the page.

For this, click on Import Media and choose from the PC library what you want to edit.

Step3 Drag the clip to the timeline

Drag and drop the clip into the timeline from the import section. If you have more clips, choose first according to your script.

Add the text-written clip into the second video track because we have to insert the background into the first video track later.

After inserting the clip into the timeline, it’s time to edit it. For this, keep following the below-mentioned steps!

Step4 Chroma key settings

To edit the chroma key, you need to open the settings. For this, follow the below instructions:

• First, double-click on the clip in the timeline of the Filmora.
• Then, the setting section of the video will pop up at the top left side.
• Mark the tick in front of the Chroma Key section, and it will show the list of different features as shown below.

Step5 Color key out

To key out the specific color for changing its background, you have to perform the following actions:

• First, find the Select color option in the settings of the clip.
• Then click on the color dropper in front of the color tab.
• After that, pick the color dropper and move it on the video to select the color from the text.

Note: Ensure to select the color from the middle of the text for better key-out accuracy.

You have to adjust the size and thickness after selecting the key-out. For this, follow the next step!

Step6 Adjust the settings

To adjust the Chroma Key’s settings, set the offset, tolerance, edge thickness, and edge feather. Increase or decrease according to your range and that suits you the best.

Then click on Alpha Channel to mark the tick in front of the option. It is due to that chroma key effects will be more clearly shown.

Now, it’s time to set the background after fixing all the settings of the chroma key effect. To perform this, scroll more to get to the next step.

Step7 Import background clips

You have to add an excellent motion background in the handwritten text video. For this, you must first import the background clip into the filmora. Then, click on Import Media and choose what you want from your PC.

Step8 Add a background clip to the timeline

After importing the background clip, now drag and drop the clip into the timeline. Finally, add the background clip to the first video track at the bottom.

Step9 Turn off the alpha channel

The last step is merging the background clip with the first clip. For this, follow the below guidelines:

• First, double-click on the handwritten text video.
• It will show the settings section at the top left corner.
• Find the chroma key section and turn Alpha Channel

Final Results

You have all done with the steps and got such a fascinating result. Following the above tricks, you can easily make your vlogs and daily videos more professional and creative. Make sure to add a great and colorful background clip.

You can also use any other motion video of scenes rather than colorful videos to give a striking look.

Conclusion

Create more attractive looks and share them with your subscribers. Mainly, vloggers can attract many viewers by making the introductory part with this effect. Then, choose hundreds of other videos from the stock media and create different looks daily.

See how you can get editing tricks on Wondershare Filmora and use them in a few clicks to get an attractive look!

Top 10 Old Film Overlays to Make Your Videos Look Vintage

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

If you like the old film mood in your videos and films, then this guide is for you. In this article, we will go through the best old film overlays to make your videos look vintage.

In this article

01 What is the Old Film Effect Called?

02 10 Amazing Old Film Overlays that Deserve a Try

03 How to Make a Video Look Old?

04 Pro Tips to Create Stunning Retro Video

Part 1: What is the Old Film Effect Called?

The old film effect that has been getting popular over the past years is called film grain and is defined as a random optical texture due to small particles appearing in the film. It is usually described as having a grainy effect and appearing old.

Part 2: 10 Amazing Old Film Overlays that Deserve a Try

In this list, we will present you with some great options that deserve your attention if you are looking to add old film aspects to your videos.

1. The Super 8 Film Grain Overlays Collection

With this collection, you have at your disposal 82 high-resolution clips of a real Super 8 film grain. With features that are easy to use in your videos, like 20-second loopable duration, 1080P Quicktime Pro resolution, each overlay has a small difference in texture and tint, and you also get 37 clips that show you visible areas with sprocket holes.

2. The Old Film Look Collection

This collection brings a large variety of film elements. From flash frames, film clutter, light leaks, countdown leader, film sprockets, 16mm and Super 8mm film. Plus, with this collection, you also get 29 video files and ProRes 1080P.

3. The Damaged 35mm Film Collection

With this collection, you have animated scans of damaged slides of 35mm film. The transparency effects are easy to use because of the white areas. You can add a file that you choose over an existing video and “darken” or “multiply” blending modes. Apart from those features, the Damaged 35mm Film Collection comes with 10 ProRes HD files.

4. The 4K 16 mm Film Overlays Collection

These overlays come from Authentic Old 16mm film, and inside this collection, you can find many effects of film dirt, scratches or dust to bring that old vintage look to your videos. It also comes with 79 ProRes video files, 4K (ULTRA HD) 3840 x 2160, 24fps resolution.

5. The Film Dirt and Scratches Collection

This collection comes with a variety of scratches and dirt textures. From authentic 16mm and Super 8mm film to give you a great old film look effect to your videos. The Film Dirt and Scratches collection comes with 28 video files, 13 minutes of footage, and ProRes 1080P.

6. 4K Super 8 Film Burn Overlays Collection - Kodak 50D

A collection like this is rare to come across. These easy-to-use effects are great for any level of expertise in editing videos. Just place them over the video and click “screen” or “lighten” modes. This collection pack comes with 47 ProRes files, 4 minutes of footage, and 4K High-Quality Scans.

7. 4K 16mm Film Grain Overlays

This collection has three great files of real film grain with dust and grain at your disposal. They use a 16mm camera for a better quality of overlays. This amazing package comes with three video files of 16mm film grain plus three bonus files.

8. 4K Film Burn Effects on 16mm

Shot in an authentic 16mm, this collection has real film burning in a projector. It has close-ups that fit a width of 16/9 screen. It also comes with 33 ProRes Files and 4 minutes of footage.

9. The VHS Effects Collection

This collection has real VHS effects to give your videos an old 80’s tape look to your videos. The collection contains many analog textures, tracking problems, and glitches. It also contains 10 minutes of footage, Quicktime ProRes 1080P file support, and 94 HD files of authentic VHS Retro Effects.

10. The Film Leaders Collection - Super 8mm and 16mm Effects

With authentic vintage countdowns, tail leaders, and old retro heads, this bundle offer you a great range of choices to add an old look to your films and videos.

Part 3: How to Make a Video Look Old?

In Filmora, you can make your videos have that old effect with simple steps.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Step 1: Open Filmora and remove all the pieces of the footage. Then arrange the rest of the footage as you see fit. Click on “Effects” on the upper left corner of your screen and then on “Filters”. Click on the Old Video effect and then drop it. After you add the filter on the segment of your video, you can drag the end of it to cover the whole duration of the movies. Click twice on the filter if you want to adjust the filter settings. Enter the desired values on the “Fade” parameter, “Frequency”, and “Alpha” options. Press “OK”, and this step is concluded.

Step 2: You can apply the black and white filters to any project in Filmora. It is very simple. Add one of the filters above the video you want to add the effect and drag one of the corners to adjust the duration. You can change the intensity through the alpha slider.

Step 3: In Filmora, you can add sepia tone rise or sun-kissed filters to your video. You are able to add desaturated filters while keeping colors like blue and green and with that create the old film style. If you want more brown and red tones, you can use the Sun-Kisser filter that highlights those colors. Adjust the filters with the alpha slider to change intensity.

Step 4: Under the black and white subcategory, you can find Ash and Willow filters. What these do is desaturate the contrast or exposure values as well as preset brightness and bring an older tone to your videos.

Step 5: You can correct any kind of filter. With the Advanced Color Correction Tab, you can navigate through features like Preset and Adjustment and desaturate your video. By clicking on the “Preset tab,” you can open a larger variety of presets, including the Old Film and Black & White presets.

Part 4: Pro Tips to Create Stunning Retro Video

You can make your video look retro with a few simple tips:

• Use several vintage apps like Retro VHS, 8mm Camcorder, and others.
• Keep low highlights and low contrasts.
• Keep low saturation and control the hue, saturation, and luminance of your video.
• Film Overlays. With this, you can bring the mood just right. If you add a soft light overall to start with, it will instantly look slightly more vintage.
• By decreasing contrast, you are darkening your videos and giving them a grainier old look.
• If you bring up the black levels, you will leave more space for other tones to shine and turn the mood around your videos.
• In contrast, if you bring down the whites in your videos, making even the brightest colors turn grey.

Conclusion

There are various ways to turn your videos into old relics. Using Filmora, you have a powerful tool in your hands to change any desired media, and with this step-by-step guide, you will get there in no time.

Try It Free Try It Free

If you like the old film mood in your videos and films, then this guide is for you. In this article, we will go through the best old film overlays to make your videos look vintage.

In this article

01 What is the Old Film Effect Called?

02 10 Amazing Old Film Overlays that Deserve a Try

03 How to Make a Video Look Old?

04 Pro Tips to Create Stunning Retro Video

Part 1: What is the Old Film Effect Called?

The old film effect that has been getting popular over the past years is called film grain and is defined as a random optical texture due to small particles appearing in the film. It is usually described as having a grainy effect and appearing old.

Part 2: 10 Amazing Old Film Overlays that Deserve a Try

In this list, we will present you with some great options that deserve your attention if you are looking to add old film aspects to your videos.

1. The Super 8 Film Grain Overlays Collection

With this collection, you have at your disposal 82 high-resolution clips of a real Super 8 film grain. With features that are easy to use in your videos, like 20-second loopable duration, 1080P Quicktime Pro resolution, each overlay has a small difference in texture and tint, and you also get 37 clips that show you visible areas with sprocket holes.

2. The Old Film Look Collection

This collection brings a large variety of film elements. From flash frames, film clutter, light leaks, countdown leader, film sprockets, 16mm and Super 8mm film. Plus, with this collection, you also get 29 video files and ProRes 1080P.

3. The Damaged 35mm Film Collection

With this collection, you have animated scans of damaged slides of 35mm film. The transparency effects are easy to use because of the white areas. You can add a file that you choose over an existing video and “darken” or “multiply” blending modes. Apart from those features, the Damaged 35mm Film Collection comes with 10 ProRes HD files.

4. The 4K 16 mm Film Overlays Collection

These overlays come from Authentic Old 16mm film, and inside this collection, you can find many effects of film dirt, scratches or dust to bring that old vintage look to your videos. It also comes with 79 ProRes video files, 4K (ULTRA HD) 3840 x 2160, 24fps resolution.

5. The Film Dirt and Scratches Collection

This collection comes with a variety of scratches and dirt textures. From authentic 16mm and Super 8mm film to give you a great old film look effect to your videos. The Film Dirt and Scratches collection comes with 28 video files, 13 minutes of footage, and ProRes 1080P.

6. 4K Super 8 Film Burn Overlays Collection - Kodak 50D

A collection like this is rare to come across. These easy-to-use effects are great for any level of expertise in editing videos. Just place them over the video and click “screen” or “lighten” modes. This collection pack comes with 47 ProRes files, 4 minutes of footage, and 4K High-Quality Scans.

7. 4K 16mm Film Grain Overlays

This collection has three great files of real film grain with dust and grain at your disposal. They use a 16mm camera for a better quality of overlays. This amazing package comes with three video files of 16mm film grain plus three bonus files.

8. 4K Film Burn Effects on 16mm

Shot in an authentic 16mm, this collection has real film burning in a projector. It has close-ups that fit a width of 16/9 screen. It also comes with 33 ProRes Files and 4 minutes of footage.

9. The VHS Effects Collection

This collection has real VHS effects to give your videos an old 80’s tape look to your videos. The collection contains many analog textures, tracking problems, and glitches. It also contains 10 minutes of footage, Quicktime ProRes 1080P file support, and 94 HD files of authentic VHS Retro Effects.

10. The Film Leaders Collection - Super 8mm and 16mm Effects

With authentic vintage countdowns, tail leaders, and old retro heads, this bundle offer you a great range of choices to add an old look to your films and videos.

Part 3: How to Make a Video Look Old?

In Filmora, you can make your videos have that old effect with simple steps.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Step 1: Open Filmora and remove all the pieces of the footage. Then arrange the rest of the footage as you see fit. Click on “Effects” on the upper left corner of your screen and then on “Filters”. Click on the Old Video effect and then drop it. After you add the filter on the segment of your video, you can drag the end of it to cover the whole duration of the movies. Click twice on the filter if you want to adjust the filter settings. Enter the desired values on the “Fade” parameter, “Frequency”, and “Alpha” options. Press “OK”, and this step is concluded.

Step 2: You can apply the black and white filters to any project in Filmora. It is very simple. Add one of the filters above the video you want to add the effect and drag one of the corners to adjust the duration. You can change the intensity through the alpha slider.

Step 3: In Filmora, you can add sepia tone rise or sun-kissed filters to your video. You are able to add desaturated filters while keeping colors like blue and green and with that create the old film style. If you want more brown and red tones, you can use the Sun-Kisser filter that highlights those colors. Adjust the filters with the alpha slider to change intensity.

Step 4: Under the black and white subcategory, you can find Ash and Willow filters. What these do is desaturate the contrast or exposure values as well as preset brightness and bring an older tone to your videos.

Step 5: You can correct any kind of filter. With the Advanced Color Correction Tab, you can navigate through features like Preset and Adjustment and desaturate your video. By clicking on the “Preset tab,” you can open a larger variety of presets, including the Old Film and Black & White presets.

Part 4: Pro Tips to Create Stunning Retro Video

You can make your video look retro with a few simple tips:

• Use several vintage apps like Retro VHS, 8mm Camcorder, and others.
• Keep low highlights and low contrasts.
• Keep low saturation and control the hue, saturation, and luminance of your video.
• Film Overlays. With this, you can bring the mood just right. If you add a soft light overall to start with, it will instantly look slightly more vintage.
• By decreasing contrast, you are darkening your videos and giving them a grainier old look.
• If you bring up the black levels, you will leave more space for other tones to shine and turn the mood around your videos.
• In contrast, if you bring down the whites in your videos, making even the brightest colors turn grey.

Conclusion

There are various ways to turn your videos into old relics. Using Filmora, you have a powerful tool in your hands to change any desired media, and with this step-by-step guide, you will get there in no time.

Try It Free Try It Free

If you like the old film mood in your videos and films, then this guide is for you. In this article, we will go through the best old film overlays to make your videos look vintage.

In this article

01 What is the Old Film Effect Called?

02 10 Amazing Old Film Overlays that Deserve a Try

03 How to Make a Video Look Old?

04 Pro Tips to Create Stunning Retro Video

Part 1: What is the Old Film Effect Called?

The old film effect that has been getting popular over the past years is called film grain and is defined as a random optical texture due to small particles appearing in the film. It is usually described as having a grainy effect and appearing old.

Part 2: 10 Amazing Old Film Overlays that Deserve a Try

In this list, we will present you with some great options that deserve your attention if you are looking to add old film aspects to your videos.

1. The Super 8 Film Grain Overlays Collection

With this collection, you have at your disposal 82 high-resolution clips of a real Super 8 film grain. With features that are easy to use in your videos, like 20-second loopable duration, 1080P Quicktime Pro resolution, each overlay has a small difference in texture and tint, and you also get 37 clips that show you visible areas with sprocket holes.

2. The Old Film Look Collection

This collection brings a large variety of film elements. From flash frames, film clutter, light leaks, countdown leader, film sprockets, 16mm and Super 8mm film. Plus, with this collection, you also get 29 video files and ProRes 1080P.

3. The Damaged 35mm Film Collection

With this collection, you have animated scans of damaged slides of 35mm film. The transparency effects are easy to use because of the white areas. You can add a file that you choose over an existing video and “darken” or “multiply” blending modes. Apart from those features, the Damaged 35mm Film Collection comes with 10 ProRes HD files.

4. The 4K 16 mm Film Overlays Collection

These overlays come from Authentic Old 16mm film, and inside this collection, you can find many effects of film dirt, scratches or dust to bring that old vintage look to your videos. It also comes with 79 ProRes video files, 4K (ULTRA HD) 3840 x 2160, 24fps resolution.

5. The Film Dirt and Scratches Collection

This collection comes with a variety of scratches and dirt textures. From authentic 16mm and Super 8mm film to give you a great old film look effect to your videos. The Film Dirt and Scratches collection comes with 28 video files, 13 minutes of footage, and ProRes 1080P.

6. 4K Super 8 Film Burn Overlays Collection - Kodak 50D

A collection like this is rare to come across. These easy-to-use effects are great for any level of expertise in editing videos. Just place them over the video and click “screen” or “lighten” modes. This collection pack comes with 47 ProRes files, 4 minutes of footage, and 4K High-Quality Scans.

7. 4K 16mm Film Grain Overlays

This collection has three great files of real film grain with dust and grain at your disposal. They use a 16mm camera for a better quality of overlays. This amazing package comes with three video files of 16mm film grain plus three bonus files.

8. 4K Film Burn Effects on 16mm

Shot in an authentic 16mm, this collection has real film burning in a projector. It has close-ups that fit a width of 16/9 screen. It also comes with 33 ProRes Files and 4 minutes of footage.

9. The VHS Effects Collection

This collection has real VHS effects to give your videos an old 80’s tape look to your videos. The collection contains many analog textures, tracking problems, and glitches. It also contains 10 minutes of footage, Quicktime ProRes 1080P file support, and 94 HD files of authentic VHS Retro Effects.

10. The Film Leaders Collection - Super 8mm and 16mm Effects

With authentic vintage countdowns, tail leaders, and old retro heads, this bundle offer you a great range of choices to add an old look to your films and videos.

Part 3: How to Make a Video Look Old?

In Filmora, you can make your videos have that old effect with simple steps.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Step 1: Open Filmora and remove all the pieces of the footage. Then arrange the rest of the footage as you see fit. Click on “Effects” on the upper left corner of your screen and then on “Filters”. Click on the Old Video effect and then drop it. After you add the filter on the segment of your video, you can drag the end of it to cover the whole duration of the movies. Click twice on the filter if you want to adjust the filter settings. Enter the desired values on the “Fade” parameter, “Frequency”, and “Alpha” options. Press “OK”, and this step is concluded.

Step 2: You can apply the black and white filters to any project in Filmora. It is very simple. Add one of the filters above the video you want to add the effect and drag one of the corners to adjust the duration. You can change the intensity through the alpha slider.

Step 3: In Filmora, you can add sepia tone rise or sun-kissed filters to your video. You are able to add desaturated filters while keeping colors like blue and green and with that create the old film style. If you want more brown and red tones, you can use the Sun-Kisser filter that highlights those colors. Adjust the filters with the alpha slider to change intensity.

Step 4: Under the black and white subcategory, you can find Ash and Willow filters. What these do is desaturate the contrast or exposure values as well as preset brightness and bring an older tone to your videos.

Step 5: You can correct any kind of filter. With the Advanced Color Correction Tab, you can navigate through features like Preset and Adjustment and desaturate your video. By clicking on the “Preset tab,” you can open a larger variety of presets, including the Old Film and Black & White presets.

Part 4: Pro Tips to Create Stunning Retro Video

You can make your video look retro with a few simple tips:

• Use several vintage apps like Retro VHS, 8mm Camcorder, and others.
• Keep low highlights and low contrasts.
• Keep low saturation and control the hue, saturation, and luminance of your video.
• Film Overlays. With this, you can bring the mood just right. If you add a soft light overall to start with, it will instantly look slightly more vintage.
• By decreasing contrast, you are darkening your videos and giving them a grainier old look.
• If you bring up the black levels, you will leave more space for other tones to shine and turn the mood around your videos.
• In contrast, if you bring down the whites in your videos, making even the brightest colors turn grey.

Conclusion

There are various ways to turn your videos into old relics. Using Filmora, you have a powerful tool in your hands to change any desired media, and with this step-by-step guide, you will get there in no time.

Try It Free Try It Free

If you like the old film mood in your videos and films, then this guide is for you. In this article, we will go through the best old film overlays to make your videos look vintage.

In this article

01 What is the Old Film Effect Called?

02 10 Amazing Old Film Overlays that Deserve a Try

03 How to Make a Video Look Old?

04 Pro Tips to Create Stunning Retro Video

Part 1: What is the Old Film Effect Called?

The old film effect that has been getting popular over the past years is called film grain and is defined as a random optical texture due to small particles appearing in the film. It is usually described as having a grainy effect and appearing old.

Part 2: 10 Amazing Old Film Overlays that Deserve a Try

In this list, we will present you with some great options that deserve your attention if you are looking to add old film aspects to your videos.

1. The Super 8 Film Grain Overlays Collection

With this collection, you have at your disposal 82 high-resolution clips of a real Super 8 film grain. With features that are easy to use in your videos, like 20-second loopable duration, 1080P Quicktime Pro resolution, each overlay has a small difference in texture and tint, and you also get 37 clips that show you visible areas with sprocket holes.

2. The Old Film Look Collection

This collection brings a large variety of film elements. From flash frames, film clutter, light leaks, countdown leader, film sprockets, 16mm and Super 8mm film. Plus, with this collection, you also get 29 video files and ProRes 1080P.

3. The Damaged 35mm Film Collection

With this collection, you have animated scans of damaged slides of 35mm film. The transparency effects are easy to use because of the white areas. You can add a file that you choose over an existing video and “darken” or “multiply” blending modes. Apart from those features, the Damaged 35mm Film Collection comes with 10 ProRes HD files.

4. The 4K 16 mm Film Overlays Collection

These overlays come from Authentic Old 16mm film, and inside this collection, you can find many effects of film dirt, scratches or dust to bring that old vintage look to your videos. It also comes with 79 ProRes video files, 4K (ULTRA HD) 3840 x 2160, 24fps resolution.

5. The Film Dirt and Scratches Collection

This collection comes with a variety of scratches and dirt textures. From authentic 16mm and Super 8mm film to give you a great old film look effect to your videos. The Film Dirt and Scratches collection comes with 28 video files, 13 minutes of footage, and ProRes 1080P.

6. 4K Super 8 Film Burn Overlays Collection - Kodak 50D

A collection like this is rare to come across. These easy-to-use effects are great for any level of expertise in editing videos. Just place them over the video and click “screen” or “lighten” modes. This collection pack comes with 47 ProRes files, 4 minutes of footage, and 4K High-Quality Scans.

7. 4K 16mm Film Grain Overlays

This collection has three great files of real film grain with dust and grain at your disposal. They use a 16mm camera for a better quality of overlays. This amazing package comes with three video files of 16mm film grain plus three bonus files.

8. 4K Film Burn Effects on 16mm

Shot in an authentic 16mm, this collection has real film burning in a projector. It has close-ups that fit a width of 16/9 screen. It also comes with 33 ProRes Files and 4 minutes of footage.

9. The VHS Effects Collection

This collection has real VHS effects to give your videos an old 80’s tape look to your videos. The collection contains many analog textures, tracking problems, and glitches. It also contains 10 minutes of footage, Quicktime ProRes 1080P file support, and 94 HD files of authentic VHS Retro Effects.

10. The Film Leaders Collection - Super 8mm and 16mm Effects

With authentic vintage countdowns, tail leaders, and old retro heads, this bundle offer you a great range of choices to add an old look to your films and videos.

Part 3: How to Make a Video Look Old?

In Filmora, you can make your videos have that old effect with simple steps.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Step 1: Open Filmora and remove all the pieces of the footage. Then arrange the rest of the footage as you see fit. Click on “Effects” on the upper left corner of your screen and then on “Filters”. Click on the Old Video effect and then drop it. After you add the filter on the segment of your video, you can drag the end of it to cover the whole duration of the movies. Click twice on the filter if you want to adjust the filter settings. Enter the desired values on the “Fade” parameter, “Frequency”, and “Alpha” options. Press “OK”, and this step is concluded.

Step 2: You can apply the black and white filters to any project in Filmora. It is very simple. Add one of the filters above the video you want to add the effect and drag one of the corners to adjust the duration. You can change the intensity through the alpha slider.

Step 3: In Filmora, you can add sepia tone rise or sun-kissed filters to your video. You are able to add desaturated filters while keeping colors like blue and green and with that create the old film style. If you want more brown and red tones, you can use the Sun-Kisser filter that highlights those colors. Adjust the filters with the alpha slider to change intensity.

Step 4: Under the black and white subcategory, you can find Ash and Willow filters. What these do is desaturate the contrast or exposure values as well as preset brightness and bring an older tone to your videos.

Step 5: You can correct any kind of filter. With the Advanced Color Correction Tab, you can navigate through features like Preset and Adjustment and desaturate your video. By clicking on the “Preset tab,” you can open a larger variety of presets, including the Old Film and Black & White presets.

Part 4: Pro Tips to Create Stunning Retro Video

You can make your video look retro with a few simple tips:

• Use several vintage apps like Retro VHS, 8mm Camcorder, and others.
• Keep low highlights and low contrasts.
• Keep low saturation and control the hue, saturation, and luminance of your video.
• Film Overlays. With this, you can bring the mood just right. If you add a soft light overall to start with, it will instantly look slightly more vintage.
• By decreasing contrast, you are darkening your videos and giving them a grainier old look.
• If you bring up the black levels, you will leave more space for other tones to shine and turn the mood around your videos.
• In contrast, if you bring down the whites in your videos, making even the brightest colors turn grey.

Conclusion

There are various ways to turn your videos into old relics. Using Filmora, you have a powerful tool in your hands to change any desired media, and with this step-by-step guide, you will get there in no time.

This Article Talks in Detail About How to Download Windows Movie Maker 2012 Version, the Key Features, How to Use It, Etc. It Further Discusses an Alternative Way to Create Videos on Windows PC. Check Out

Suppose you are looking for professionals who can edit videos for you and halt your search. It is because, with the help of windows movie maker 2012, you can now fulfill your basic video editing needs for free. There is no need to pay extra to create the videos of your choice. You can do so sitting in the comfort of your house as windows movie maker has some of the best video editing tools that are user-friendly and simple. You will be amazed to make videos with a professional touch.

One of the best features of a movie maker is that you can encapsulate images, sound, and videos into a single frame. With the help of its exciting features, you can edit your videos according to your choice and upload them on social media. Since Windows movie maker 2012 is available online for free, you can easily download the program and launch it on your PC for a perfect video editing journey.

Part 1. Key Features of Windows Movie Maker 2012

Windows movie maker has some of the most exciting features that can help you create professional videos of your choice. Following are some of the key features:

1. Create your movie with photos and images

Windows movie maker enables you to create your personalized movie with the help of photos and videos of your choice. Since it supports files of various formats, you can easily add them to the storyboard to create a viable sequence.

2. Import videos and audio

Windows movie maker allows you to import audio and video from your computer’s hard drive and fix them according to your convenience. You can even edit them with exciting editing tools.

Moreover, you also have the option to download music of your choice online and add it to your storyboard.

3. Record live video and audio

One of the exciting features of Windows movie maker 12 is that you can do live recording from your webcam and use the microphone to add narration to your video. Once you have completed the process, you have the option to edit it at your convenience.

4. Modify the sequence of the videos

Once you have inserted all the video clips on the storyboard, you can modify and change the sequence to make it look like a story. The timeline feature of windows movie maker allows you to drag and drop the video clips according to your choice.

5. Add image effects and transitions

Windows movie maker has some fantastic image effects and transitions. You can choose the effects you can apply to the raw images and give them a professional look.

Moreover, with the help of the transition features, you can make exuberant effects between the video clips.

6. Integrate opening and closing credits

Windows movie maker allows you to give a natural movie effect to your videos. It has the option of incorporating opening and closing credits to your video so that it gives a feel of a real movie.

Part 2. Download and Install Windows Movie Maker 2012

In the present era, you may find it challenging to get the download option of windows movie maker 2012. It is because it does not exist as a standalone application, and you will get it with windows essentials movie maker. Moreover, if you visit the official site of Microsoft, you may find a link for downloading the movie maker. You do not need any tech support to download the software. The most exciting part is that you can download the full version free of cost.

Steps to download windows movie maker 2012

• Download windows live essential by visiting the official website and clicking on the download option.

• Click to open the setup file from the download folder of your computer.
• Now, at this point, opt to click on run to start the installation process of windows essentials.

• Click on ‘Install all windows essential.

• The windows movie maker 2012 will start installing on your computer.
• Once the installation is complete, you can click on the windows movie maker 2012 icon to open the application.

Part 3. How to use Windows Movie Maker 2012?

Though windows movie maker 2012 is a free application, it is professional video editing software. With the help of the software, you can easily create amazing videos and publish them over the net and on social media. It has some of the best editing tools to help you create amazing videos.

Steps to edit a video with windows movie maker

Windows movie maker has some of the best editing tools with which you will be able to enhance your videos easily. Following are the steps to edit a video:

• Drag the video clips from your hard drive to the storyboard of the windows movie maker.

• The software has a trimming tool with which you can easily edit unwanted areas.

• Click on the area that you want to trim and then opt to click on ‘Set Start Point’ and ‘Set End Point.’ You can also split a particular video clip according to your convenience or add effects as per need.
• Click on the preview to watch the edited video.

Part 4. Alternative Way to Create Videos on Windows PC

One of the best alternatives for windows movie maker 2012 is Filmora . It is a powerful yet easy-to-use software with which you can create beautiful videos. You can add multiple video clips and audio to create a professional video. One of the most delicate features of Filmora is that you can sync the audio with the video, thus making the sound much clearer. You can download Filmora easily over the net as it is free. You need to follow the links to install the software on your personal computer or laptop finally.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Following are some simple steps to edit a video with Filmora .

• Before you start to edit your video, you must plan the sequence of the video clips.
• Drag and drop the video clips to the timeline.
• Use the trim option to trim and edit the videos so that there is a smooth transition from one video clip to another.
• Fiora has a valuable collection of different transitions that you can use to give a professional touch to your video. You can add the transitions while trimming the video clips.
• Add titles to your video to give it a movie-like feel to the audience.
• The best part of the editing features of Filmora is the image effects tool. However, it would be best if you spent some time using the effects in your video clips so that it looks perfect.
• You can also add sound to your video to make it more attractive.

After you finish with the editing, output your project and save it.

Conclusion

Therefore, it is time you explore your creativity with the help of windows live movie maker 2012. It has some of the best and easy-to-use editing tools with which you can create high-quality videos. Moreover, since the software is simple and easy to use, one does not have to know photo editing thoroughly. It is because you can quickly identify the tools without much difficulty. So, if you are looking for a simple video editor that is free as well as has professional features, then you must go for windows movie maker 2012. You will get the best experience of your life in video editing.

Free Download For macOS 10.14 or later

Following are some simple steps to edit a video with Filmora .

• Before you start to edit your video, you must plan the sequence of the video clips.
• Drag and drop the video clips to the timeline.
• Use the trim option to trim and edit the videos so that there is a smooth transition from one video clip to another.
• Fiora has a valuable collection of different transitions that you can use to give a professional touch to your video. You can add the transitions while trimming the video clips.
• Add titles to your video to give it a movie-like feel to the audience.
• The best part of the editing features of Filmora is the image effects tool. However, it would be best if you spent some time using the effects in your video clips so that it looks perfect.
• You can also add sound to your video to make it more attractive.

After you finish with the editing, output your project and save it.

Conclusion

Therefore, it is time you explore your creativity with the help of windows live movie maker 2012. It has some of the best and easy-to-use editing tools with which you can create high-quality videos. Moreover, since the software is simple and easy to use, one does not have to know photo editing thoroughly. It is because you can quickly identify the tools without much difficulty. So, if you are looking for a simple video editor that is free as well as has professional features, then you must go for windows movie maker 2012. You will get the best experience of your life in video editing.

Add Stylish Text to Videos

Create your style. Let it be unique for yourself and yet identifiable for others – Anna Wintour. Adding Stylish Text to your video helps to communicate the clarity of the story’s message, tone, and sentiment. But how much text on video is enough? This article will teach you how and when to add stylish text to your video and its importance.

What is Stylish Text

In general, Stylish text is preset animations that you can use to the text in your video with just one click, adding an efficient plan to grab your viewers’ attentiveness. From bold to essential, stylish text can help give your video a clear look while also increasing the accessibility of your videos. Text styles offer a monochrome highlight on your text and added movement to make your videos more engaging to the audience.

Most of the video editing software released offers different text style presets that you can use to accomplish the look you’re aiming. In Wondershare Filmora 11 , browsing the Title menu, there are a lot of Text categories available that you can use depending on the type of video you are working with, whether it’s all about events like Mother’s Day, Valentine’s day, or gaming text style, travel, sports, everything in one total package.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to use Stylish Text

As mentioned, Styles help you add dynamic effects that make your videos exceptional, whether you use a template or start from scratch.

For this example, we’ll walk you through using text styles on the Short video clip that I made using Wondershare Filmora 11 .

Step1 Open your Wondershare Filmora 11 Video editing software

1. Launch Wondershare Filmora 11 from your system and select New Project.
2. Import the selected videos and open them in the program to enhance the speed and duration of the video. The video can also be dragged and dropped to the interface.

Step2 Imported Video Clips

In using the Title or the Stylish Text, you can add your video clip on Timeline Panel, or you can first add the Title text.

Step3 Add Stylish Text

Let’s first add our selected Stylish text/title, or you can search in the Search box above for any related text you want.

1. Go to Title Menu above, click the Title category that you want, and drag it to the Timeline Panel below. Once added, you can check if this will fit the story of your video.

Step4 Change Stylish Text Duration and Effects

You can also modify or change the Duration of the Title you’ve added in the Timeline panel. The default length of a text effect is 5 seconds. There are two ways to change the course of a text effect.

1. Drag the text on the timeline directly and adjust the duration either on the left or right side.
2. Or you can select the text in the timeline panel and click the duration icon to set a new duration. The duration setting will pop out then you can input your desired period.

Step5 Edit Text Effects

1. In Editing the Added Stylish Text, you can double click on it in the timeline to open the Text editing panel. From here, you can change the style (color, font, size, alignment, transform, and compositing) and choose the Word Art type and animation of your text.

Before (Default)

After

Step6 Advanced Text Editing

To edit your text in more ways, click the Advanced button to enter the Advanced Text Edit panel.

In the Advanced Text Edit panel, you can edit and add more elements to the selected title effects, such as text boxes, shapes, or images.

You can modify your text effects in the Advanced Text Edit panel in the following ways: color, font, animation, fill, border, and many more.

You can explore each Title properties/setting to modify your text.

Note: Remove Title/Texts
There are two ways to remove Title/ Texts from your video: (In Wondershare Filmora )
Just select the text you want to remove in your Timeline Panel and hit Delete on your keyboard.
Right-click on the text in the timeline and select DELETE from the menu.

What is the importance of Adding Stylish Text?

As a Youtuber, creating thumbnails is one of the essential aspects of getting the attention of your audience. A thumbnail is a small image inserted into a video that exemplifies larger content inside the video or article. Millions of videos are produced and uploaded on the Internet every single day, so it’s essential for yours to stand out. Text on videos has several different added benefits as well. In this video, we’ll give four reasons why you should start adding text to your videos.

1. Content becomes easy to remember

Viewer Retention (sometimes referred to as “Audience Retention”) is the average percentage of a video that people watch. Videos with high Viewer Retention scores tend to sell more. Adding some Text/Title in your video is one of the critical factors to remember because the viewers get multiple cue points (example: audio and text on video) to confirm their understanding and retain the essence of the messaging.

2. Make sense even without sound

A lot of people watch videos on mute mode. A recent study indicates that 85% of Facebook videos are watched without sound. A lot of us consume videos while in transit and sometimes at work as well :).

Text is very expository for most of these videos since it’d help in building the proper context for the viewer.

3. It Helps Summarize Key Points

Some audiences are looking for a summary of the video in an instant to save more time. As Youtuber, it is very helpful if you will add Text/Titles as caption perse in a video. For example, one needs to remember 2-3 tips for driving. If the captions or text show up on the video when the driver talks about this and that, that’s better!

4. Aesthetics

Some people don’t care much about the graphics; they just go through the textual content. This is because texts are the major sources of information. Adding Styling Text/Titles can make a video engaging and attractive. The audience wants to see some color and action in the videos to grasp the storyboard easily.

Free Download For macOS 10.14 or later

How to use Stylish Text

As mentioned, Styles help you add dynamic effects that make your videos exceptional, whether you use a template or start from scratch.

For this example, we’ll walk you through using text styles on the Short video clip that I made using Wondershare Filmora 11 .

Step1 Open your Wondershare Filmora 11 Video editing software

1. Launch Wondershare Filmora 11 from your system and select New Project.
2. Import the selected videos and open them in the program to enhance the speed and duration of the video. The video can also be dragged and dropped to the interface.

Step2 Imported Video Clips

In using the Title or the Stylish Text, you can add your video clip on Timeline Panel, or you can first add the Title text.

Step3 Add Stylish Text

Let’s first add our selected Stylish text/title, or you can search in the Search box above for any related text you want.

1. Go to Title Menu above, click the Title category that you want, and drag it to the Timeline Panel below. Once added, you can check if this will fit the story of your video.

Step4 Change Stylish Text Duration and Effects

You can also modify or change the Duration of the Title you’ve added in the Timeline panel. The default length of a text effect is 5 seconds. There are two ways to change the course of a text effect.

1. Drag the text on the timeline directly and adjust the duration either on the left or right side.
2. Or you can select the text in the timeline panel and click the duration icon to set a new duration. The duration setting will pop out then you can input your desired period.

Step5 Edit Text Effects

1. In Editing the Added Stylish Text, you can double click on it in the timeline to open the Text editing panel. From here, you can change the style (color, font, size, alignment, transform, and compositing) and choose the Word Art type and animation of your text.

Before (Default)

After

Step6 Advanced Text Editing

To edit your text in more ways, click the Advanced button to enter the Advanced Text Edit panel.

In the Advanced Text Edit panel, you can edit and add more elements to the selected title effects, such as text boxes, shapes, or images.

You can modify your text effects in the Advanced Text Edit panel in the following ways: color, font, animation, fill, border, and many more.

You can explore each Title properties/setting to modify your text.

Note: Remove Title/Texts
There are two ways to remove Title/ Texts from your video: (In Wondershare Filmora )
Just select the text you want to remove in your Timeline Panel and hit Delete on your keyboard.
Right-click on the text in the timeline and select DELETE from the menu.

What is the importance of Adding Stylish Text?

As a Youtuber, creating thumbnails is one of the essential aspects of getting the attention of your audience. A thumbnail is a small image inserted into a video that exemplifies larger content inside the video or article. Millions of videos are produced and uploaded on the Internet every single day, so it’s essential for yours to stand out. Text on videos has several different added benefits as well. In this video, we’ll give four reasons why you should start adding text to your videos.

1. Content becomes easy to remember

Viewer Retention (sometimes referred to as “Audience Retention”) is the average percentage of a video that people watch. Videos with high Viewer Retention scores tend to sell more. Adding some Text/Title in your video is one of the critical factors to remember because the viewers get multiple cue points (example: audio and text on video) to confirm their understanding and retain the essence of the messaging.

2. Make sense even without sound

A lot of people watch videos on mute mode. A recent study indicates that 85% of Facebook videos are watched without sound. A lot of us consume videos while in transit and sometimes at work as well :).

Text is very expository for most of these videos since it’d help in building the proper context for the viewer.

3. It Helps Summarize Key Points

Some audiences are looking for a summary of the video in an instant to save more time. As Youtuber, it is very helpful if you will add Text/Titles as caption perse in a video. For example, one needs to remember 2-3 tips for driving. If the captions or text show up on the video when the driver talks about this and that, that’s better!

4. Aesthetics

Some people don’t care much about the graphics; they just go through the textual content. This is because texts are the major sources of information. Adding Styling Text/Titles can make a video engaging and attractive. The audience wants to see some color and action in the videos to grasp the storyboard easily.

Also read: