How to Make Video Slow Motion?

Slow-motion videos are in trend now, especially when shooting for Instagram Reels , TikTok videos, or YouTube Shorts . While many users record the entire video in slow motion, there are others who need only a particular section of a clip to play at a reduced speed. Nevertheless, slowing down footage is no longer rocket science, thanks to the advancements in technology, and the availability and ease of access to relevant apps.

That said, here you will learn what is needed to record a video in slow motion, and how to get the job done in a simple way. In addition, you will also learn how to reduce the playback speed of an already existing video if it was recorded at a normal pace.

In this article

01 How to Make Slow Motion Videos via Recording?

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

02 How to Apply the Smooth Slow-Motion Effect in Post-Production?

03 When to Use Slow Motion?

Part 1: How to Make Slow Motion Videos via Recording?

The fact is, the playback speed of a video is inversely proportional to the frames per second (FPS) it has been recorded in. Usually, to have a video play at normal speed, it is recorded at 24 FPS or 30 FPS. On the other hand, if you increase the frame rate (FPS) to 120 or 240, the playback speed slows down. You can easily check this if you have access to a DSLR camera or an iPhone. These devices allow you to adjust the FPS so the videos can be recorded in slow motion.

For your convenience and learning, the step-by-step procedure on how to record a video in slow motion using an iPhone is explained below:

Step 1: Get to the SLO-MO Mode

Launch the Camera app on your iPhone (iPhone 13 Pro Max is used here for illustrations), and swipe the screen to the left to get to the SLO-MO mode.

Step 2: Adjust Recording Preferences

Tap the number at the top-right corner to switch between 120 FPS and 240 FPS as needed. Tap 1x from the lower-middle section of the screen, and use the rotator to adjust your preferred zoom level.

Step 3: Start and Stop Recording

Tap the Record button from the bottom-center of the screen to begin recording the video in slow motion. Tap Stop when you are done. You can access the recorded video from the Videos container of the Photos app in your iPhone.

If you are using Android phone, you can check this article to find out more details about How to Record Super Slow Motion Videos on Your Phone.

You may also like: Best Slo-mo Camera Apps for Android And iPhone

Part 2: How to Apply the Smooth Slow-Motion Effect in Post-Production?

If you don’t have access to a camera that can record videos in slow motion, or in case you want to capture the footage at normal playback speed and then slow it down later, you need a dedicated tool to get the job done. Even though several post-production applications are available in the market, the one that is most versatile, has an intuitive interface, and is quite easy to use is Filmora video editor from Wondershare .

The latest version of the app, i.e., Wondershare Filmora 11 has a new feature called Speed Ramping that enables you to graphically manage the speed of the clips. While using the feature, you can either slow down the entire video or certain parts of it according to your requirements. For your learning, both the methods are explained below:

Method 1: Add Slow Motion Effect to the Whole Clip

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import the Source Video and Add to Timeline

Launch Wondershare Filmora on your Windows or Mac computer (a Windows 11 PC is used here for illustrations), click New Project from the first screen that appears. Make sure that the Media tool is selected from the standard tool bar at the top, click anywhere inside the Media window, and select and import the source clip to the program.

Next, hover the mouse over the thumbnail of the imported video in the Media window, and click the + icon present at its bottom-right corner. When the confirmation box comes up, click the Match to Media or Keep Project Settings button to change the project settings to match the resolution of the video, or change the footage to meet the project settings respectively.

Step 2: Add Slow Motion Effect to the Whole Clip

Once the media is added to the timeline, click on it and then click the Speed icon on the toolbar. Scroll down to the Slow menu and then you will see 0.5x, 0.25x, 0.1x, 0.05x and 0.01x presets. Select one to add slo-mo effects to the whole select clip. and click Speed Ramping from the menu that drops down.

You can also right click the video in the timeline, and hover over to Speed option to select Uniform Speed to adjust the speed of the video to make a slo-mo effect video. Drag the speed slider to the left to slow down the video and you will see how many times it slowed down in the next field.

Method 2: Use Speed Ramping to Add Slow Motion Effect

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Speed Ramping enables you to add the slow-motion effect at different parts of a video and even freeze the screen for the duration that you specify. The processes to get these done are given below in detail:

Step 1: Add Source Video to Timeline and Get to the Speed Ramping Window

Use the process given in the previous method to import a source video to Wondershare Filmora 11 and add it to the Timeline. Then use the process given in the second step of the previous method to get to the Speed Ramping window.

Step 2: Add Slow Motion Effect to Different Parts of the Clip

Go to the Speed Ramping tab if it is not already selected, click Custom from the available options, and drag the adjustment points below the center line to reduce the playback speed for that particular section of the clip. Optionally, you can click any of the available presets to automatically add the slow-motion effect to the video.

Note: You can also drag the adjustment points above the line to increase the playback speed.

To add an adjustment point on the frame where it is not already present, place the playhead (skimmer) at the correct position, and click Add Adjust Point from the left of the Speed Ramping window itself. Once added, you can drag it downward to reduce the playback speed of that part of the clip.

Step 3: Freeze the Video

Place the skimmer on the frame where you want to freeze the video for a while, and click Add Freeze Frame from the left of the Speed Ramping window. When the time box appears, in the Freeze Time field, enter the duration in seconds you want to freeze the screen for, and click OK.

After adding a freeze point, optionally, you can drag and reposition it in the Speed Ramping timeline as needed. Finally, click OK from the bottom-right area to save the changes.

Part 3: When to Use Slow Motion?

There could be many instances when you want to add a slow-motion effect to your videos. Some of the most common ones include:

• Add Focus

If there is a particular scene in a clip that you want the audience to focus on, it would be a good idea to add the slow-motion effect right before that action appears on the screen, and bring the speed back to normal when the section is over.

• Skill or Style Demonstration

When a clip is playing at a normal speed, many times, the audience isn’t able to see the skills that you want to display. This is where you may want to add the slow-motion effect so that every detail can be noticed clearly and in detail.

• Replays

Mostly used for tournaments and matches where the actual action is to replayed so the audience, umpires, and other viewers can see the movements in detail before making the right decision.

• Observation

Some natural phenomena such as a deer running in the woods, a balloon full of water bursting, etc. occur quite quickly. If you want to witness such things clearly and in detail, it would be good to record them, and then reduce the playback speed for better viewing.

• Add Suspense

When you add the slow-motion effect to a scene, the impulse of the audience is automatically increased, and they take that particular section more seriously and with a thrill.

Conclusion

The slow-motion effect is inversely proportional to the framerate, i.e., frames per second or FPS. Almost all DSLR cameras that are available nowadays allow you to switch between different FPS values (typically 120 and 240) before recording. Also, if you have access to an iPhone, its Camera app has a built-in SLO-MO mode that can capture the footage in slow motion.

In addition, if you already have a video that has been recorded at a normal speed, you can use an efficient post-production software like Wondershare Filmora 11, and exploit its Speed Ramping feature to add the slow-motion effect at different scenes of a clip.

How to Put a Background on A Green Screen

The use of green screen in photos and videos is a common phenomenon. Starting from news broadcaster studios to visual effects in action movies, the use of green screen has become a commodity in photo and video shoots. This is because you can add background to green screen video and photo during the post-production phase as per your requirements.

Starting from replacing the green screen with a studio setup like news broadcasting to adding characters visiting an alien planet in movies, everything you can imagine is possible to including in your videos and photos. You will need a professional video editor and the steps on how to put a background on a green screen.

1. Way 1. Use Filmora
2. Way 2. Use iMovie
3. Way 3. Use Premiere Pro

• How to change the background of green screen image

Part 1. How to put a background on a green screen to video?

The first thing you need to do is shoot your video with high-quality green screen in the background. Make sure that it is evenly spread and lit up so that there are no light and dark patches. Now that you have green screen video, you will need a professional video editor to replace the green screen with any background as per your requirements. Here are the three ways on how to add background to green screen.

Way 1. Use Filmora

Wondershare Filmora is the easiest video editor to add a background to green screen video instantly. Filmora is a professional video editor with an intuitive user interface. There are loads of tools to add visual effects and perform basic to advanced editing. Filmora is available for Windows and Mac users and you have to transfer your recorded green screen video to your computer. You can replace green screen with a video as well as photo as per your preference. Here are the steps to put a background on green screen video using Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Filmora . Launch the application and click on New Project. You should have the green screen video as well as the background replacement video or photo ready with which you want to replace green screen background.

Step2 Import your green screen video as well as the background video or photo under Project Media folder. Drag and drop both of them to Timeline. Make sure the green screen video is on top of the replacement background video or photo.

Step3 Double-click on the video clip that you have dropped on Timeline. Go to Video tab and turn on Chroma Key option.

Step4 You will see on the Instant Viewer that the green screen of recorded video is replaced with the replacement background immediately. You can adjust the parameters under Chroma Key such as offset, tolerance, and edge thickness as required.

Step5 Finally, play the video and if you are satisfied, click on Export button to save the video in your desired file format.

Way 2. Use iMovie

iMovie is one of the most preferred video editors among Mac and iPhone users. This is because the app comes from Apple, and there are ample features to enhance your video content and quality with effects. Adding a background to a green screen video using iMovie is quite easy. But replacing a background of a video without green screen is rather tough.

Step1 Launch iMovie from Applications folder on your Mac as it comes pre-installed.

Step2 Import your green screen video as well as replacement background video or photo to Project Media folder.

Step3 Drag and drop them into Timeline and place the green screen video above the replacement background video/photo. Make sure that the duration of both videos is the same.

Step4 Click on the green screen video and click on Video Overlay Settings and select Green/Blue Screen option from the drop-down menu.

Step5 You can adjust Softness as well as Clean-up option so that the green screen effect is perfect.

Way 3. Use Premiere Pro

When it comes to professional video editing, Premiere Pro is undoubted one of the most widely used video editors. The learning curve is steep for amateurs, but professionals love to edit videos in Premiere Pro. You can edit 4K videos, 3D videos, multi-cam videos, and it supports cross-platform project workflow. You can replace green screen background with any desired background video or image. Here are the steps on how to add background to green screen in Premiere Pro.

Step1 Launch Adobe Premiere Pro and go to File> Import option. Select the green screen video clip as well as replacement background video and click on Open button.

Step2 Drag the video clips from the Project panel and place them to Timeline so that the green screen video stays at the top.

Step3 Go to Effects tab and click on Effects> Keying> Ultra Key.

Step4 Click on eyedropper tool under Ultra Key and use the tool to select the green screen background color.

Step5 Go to Ultra Key> Output> and select Alpha Channel option. Set Setting located under Output to Aggressive.

Step6 Go to Matte Generation and adjust Transparency using the slider available.

Step7 You will see the green screen get replaced by the video or photo you have placed below the green screen video in Timeline.

Part 2. How to change the background of green screen image?

Adobe Photoshop is one of the best photo editors that professionals use to edit photos as per requirements. You can change the background of green screen image and replace the green screen with any image of your liking. You should have a green screen image as well as a replacement image. Here are the steps how to change green screen image on Photoshop.

Step1 Launch Adobe Photoshop and import the green screen image as well as the replacement background image.

Step2 Copy the replacement image and paste it on the green screen image. Make sure you move the layer of the replacement image is placed below the green screen image so that it stays hidden.

Step3 Now select green screen image layer and go to Select menu and click on Color Range. You will get an eyedropper tool. Press Shift key and click the areas where green screen background is there so that you can remove it. Click on OK button when done.

Step4 Go to Select menu and click on Inverse option. Go to Select menu and click on Refine Edge option. This is to smoothen the edges so that no green screen is visible. Click on Ok button.

Step5 Go to Select menu and click on Inverse option. Press Delete key and the green screen background will disappear and the replacement image will appear in the background.

The Bottom Line

We have illustrated how you can add a background to your green screen video on your computer and also explained how you can replace green screen background in your photo with any image. However, for the best results, you need to use a green screen and use Filmora to add a background instantly.

The first thing you need to do is shoot your video with high-quality green screen in the background. Make sure that it is evenly spread and lit up so that there are no light and dark patches. Now that you have green screen video, you will need a professional video editor to replace the green screen with any background as per your requirements. Here are the three ways on how to add background to green screen.

Way 1. Use Filmora

Wondershare Filmora is the easiest video editor to add a background to green screen video instantly. Filmora is a professional video editor with an intuitive user interface. There are loads of tools to add visual effects and perform basic to advanced editing. Filmora is available for Windows and Mac users and you have to transfer your recorded green screen video to your computer. You can replace green screen with a video as well as photo as per your preference. Here are the steps to put a background on green screen video using Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Filmora . Launch the application and click on New Project. You should have the green screen video as well as the background replacement video or photo ready with which you want to replace green screen background.

Step2 Import your green screen video as well as the background video or photo under Project Media folder. Drag and drop both of them to Timeline. Make sure the green screen video is on top of the replacement background video or photo.

Step3 Double-click on the video clip that you have dropped on Timeline. Go to Video tab and turn on Chroma Key option.

Step4 You will see on the Instant Viewer that the green screen of recorded video is replaced with the replacement background immediately. You can adjust the parameters under Chroma Key such as offset, tolerance, and edge thickness as required.

Step5 Finally, play the video and if you are satisfied, click on Export button to save the video in your desired file format.

Way 2. Use iMovie

iMovie is one of the most preferred video editors among Mac and iPhone users. This is because the app comes from Apple, and there are ample features to enhance your video content and quality with effects. Adding a background to a green screen video using iMovie is quite easy. But replacing a background of a video without green screen is rather tough.

Step1 Launch iMovie from Applications folder on your Mac as it comes pre-installed.

Step2 Import your green screen video as well as replacement background video or photo to Project Media folder.

Step3 Drag and drop them into Timeline and place the green screen video above the replacement background video/photo. Make sure that the duration of both videos is the same.

Step4 Click on the green screen video and click on Video Overlay Settings and select Green/Blue Screen option from the drop-down menu.

Step5 You can adjust Softness as well as Clean-up option so that the green screen effect is perfect.

Way 3. Use Premiere Pro

When it comes to professional video editing, Premiere Pro is undoubted one of the most widely used video editors. The learning curve is steep for amateurs, but professionals love to edit videos in Premiere Pro. You can edit 4K videos, 3D videos, multi-cam videos, and it supports cross-platform project workflow. You can replace green screen background with any desired background video or image. Here are the steps on how to add background to green screen in Premiere Pro.

Step1 Launch Adobe Premiere Pro and go to File> Import option. Select the green screen video clip as well as replacement background video and click on Open button.

Step2 Drag the video clips from the Project panel and place them to Timeline so that the green screen video stays at the top.

Step3 Go to Effects tab and click on Effects> Keying> Ultra Key.

Step4 Click on eyedropper tool under Ultra Key and use the tool to select the green screen background color.

Step5 Go to Ultra Key> Output> and select Alpha Channel option. Set Setting located under Output to Aggressive.

Step6 Go to Matte Generation and adjust Transparency using the slider available.

Step7 You will see the green screen get replaced by the video or photo you have placed below the green screen video in Timeline.

Part 2. How to change the background of green screen image?

Adobe Photoshop is one of the best photo editors that professionals use to edit photos as per requirements. You can change the background of green screen image and replace the green screen with any image of your liking. You should have a green screen image as well as a replacement image. Here are the steps how to change green screen image on Photoshop.

Step1 Launch Adobe Photoshop and import the green screen image as well as the replacement background image.

Step2 Copy the replacement image and paste it on the green screen image. Make sure you move the layer of the replacement image is placed below the green screen image so that it stays hidden.

Step3 Now select green screen image layer and go to Select menu and click on Color Range. You will get an eyedropper tool. Press Shift key and click the areas where green screen background is there so that you can remove it. Click on OK button when done.

Step4 Go to Select menu and click on Inverse option. Go to Select menu and click on Refine Edge option. This is to smoothen the edges so that no green screen is visible. Click on Ok button.

Step5 Go to Select menu and click on Inverse option. Press Delete key and the green screen background will disappear and the replacement image will appear in the background.

The Bottom Line

We have illustrated how you can add a background to your green screen video on your computer and also explained how you can replace green screen background in your photo with any image. However, for the best results, you need to use a green screen and use Filmora to add a background instantly.

Step by Step to Rotate Video Using KMPlayer

Are you tired of watching videos upside down and don’t know how to figure it out? Or you have shot a video in Portrait mode which would have looked better in portrait mode but you can’t shoot it again? Well you’re at the right place and we might have a solution and an alternative method for you!

Did you know that KMPlayer has the ability to rotate videos? Learn how to rotate video using KMPlayer in this article, if you do not already know how. In this section, we will discuss how to make KMPlayer rotate videos while playing them, as well as how to fix KMPlayer not working when rotating videos. Continue reading to find out more.

Using KMPlayer to Rotate Video

In this section, we’ll show you how to rotate a video using KMPlayer. The following are the steps to take in order to complete the task:

The following are the steps to rotate a video in KMPlayer:

Step 1: First and foremost, download the software to your computer. Then you should install it there.

Step 2: After that, start the software on your computer.

Step 3: Launch KMPlayer and play the video that you’ll be rotating.

Step 4: After that, press the menu button and then select the “View” tab from the drop-down menu.

Step 5: Hover your mouse cursor over the tab to reveal a list of additional options.

Step 6: you must select the Rotate tab from the list of available options. This will allow you to choose another option.

Step 07: Use Flip Image 180 degree to flip the image.

Step 8: To rotate the video in correct position, use Mirror Image (180) tab. You can also change the angle at which the video is displayed.

Your video is ready to watch peacefully.

Troubleshooting Problems with KMPlayer if Rotate Video Not Working

Despite the fact that you’ve seen that KMPlayer can rotate and edit videos, there are some disadvantages to using this particular video player. The following are some of the most frequently encountered issues when using KMPlayer to rotate video.

• After rotating a video, the video appears without a black bar, which may be irritating to some of you who are used to seeing black bars. In addition, there is no workaround for this because it is the default setting of the software.
• You may occasionally receive an error message such as “class not registered,” which will cause your videos to be closed while you are watching them.
• Additionally, the screen may turn blue.
• The message “Login required” appears from time to time, which is a source of considerable irritation.
• It is also not uncommon to see that some portions of a media file are able to run while other portions of the same media file are unable to run.

If we talk about reliable and affordable alternatives to KM Player, Wonder Share Filmora is the best alternative for rotating videos.

Despite the fact that it is one of the most user-friendly pieces of software currently available, this video spinning software achieves its goal without sacrificing image quality in the process. People with little or no experience in video creation, on the other hand, will find the Filmora video editing application to be a simple and straightforward tool that anyone can use.

Users have been experiencing difficulties while editing films on the platform, according to the company, and the most recent update to Filmora includes a new manual rotation option in the video editing interface, which the company claims will alleviate this issue.

As a result, users no longer have to be concerned about films reverting to their original position when exporting videos to other formats because they can rotate videos to any angle they desire.

An Easier Way to Rotate Video with Filmora

After learning about the problems with KMPlayer, it’s very likely that you’re looking for a great alternative that will allow you to rotate your videos flawlessly. Don’t worry, because there’s a fantastic tool called Filmora Video Editor for Windows (or Filmora Video Editor for Mac) that can go the extra mile when it comes to video editing. You’ll be astounded by the extensive selection of video editing tools available in the software.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Beginners will find it easy to use because it has a simple interface to begin with.

• It allows you to edit videos in any format and from any device.
• It provides you with simple tools to rotate, trim, combine, split, and crop videos.
• It includes free effects such as titles, filters, transitions, motion elements, face-off, and more.
• It is completely free.

Steps to rotate videos in Filmora:

Simply open the wonder share filmora editing app and import your desired video to time line.

Right click on the imported video and select Rotate 90ccw until video is on your desired direction and you can simply export the video and enjoy it!

Now we have to deal with the elephant in the room: is KM Player superior, or is Wonder Share Filmora more user-friendly in terms of operation and video rotation? In general, both softwares are equally effective at rotating videos and completing tasks, but Wonder Share Filmora appears to be a significantly better and more user-friendly option. Wonder Share Filmora is powerful video editing software that allows you to learn more about video editing and take your skills to a higher level of proficiency.

Step 4: After that, press the menu button and then select the “View” tab from the drop-down menu.

Step 5: Hover your mouse cursor over the tab to reveal a list of additional options.

Step 6: you must select the Rotate tab from the list of available options. This will allow you to choose another option.

Step 07: Use Flip Image 180 degree to flip the image.

Step 8: To rotate the video in correct position, use Mirror Image (180) tab. You can also change the angle at which the video is displayed.

Your video is ready to watch peacefully.

Troubleshooting Problems with KMPlayer if Rotate Video Not Working

Despite the fact that you’ve seen that KMPlayer can rotate and edit videos, there are some disadvantages to using this particular video player. The following are some of the most frequently encountered issues when using KMPlayer to rotate video.

• After rotating a video, the video appears without a black bar, which may be irritating to some of you who are used to seeing black bars. In addition, there is no workaround for this because it is the default setting of the software.
• You may occasionally receive an error message such as “class not registered,” which will cause your videos to be closed while you are watching them.
• Additionally, the screen may turn blue.
• The message “Login required” appears from time to time, which is a source of considerable irritation.
• It is also not uncommon to see that some portions of a media file are able to run while other portions of the same media file are unable to run.

If we talk about reliable and affordable alternatives to KM Player, Wonder Share Filmora is the best alternative for rotating videos.

Despite the fact that it is one of the most user-friendly pieces of software currently available, this video spinning software achieves its goal without sacrificing image quality in the process. People with little or no experience in video creation, on the other hand, will find the Filmora video editing application to be a simple and straightforward tool that anyone can use.

Users have been experiencing difficulties while editing films on the platform, according to the company, and the most recent update to Filmora includes a new manual rotation option in the video editing interface, which the company claims will alleviate this issue.

As a result, users no longer have to be concerned about films reverting to their original position when exporting videos to other formats because they can rotate videos to any angle they desire.

An Easier Way to Rotate Video with Filmora

After learning about the problems with KMPlayer, it’s very likely that you’re looking for a great alternative that will allow you to rotate your videos flawlessly. Don’t worry, because there’s a fantastic tool called Filmora Video Editor for Windows (or Filmora Video Editor for Mac) that can go the extra mile when it comes to video editing. You’ll be astounded by the extensive selection of video editing tools available in the software.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Beginners will find it easy to use because it has a simple interface to begin with.

• It allows you to edit videos in any format and from any device.
• It provides you with simple tools to rotate, trim, combine, split, and crop videos.
• It includes free effects such as titles, filters, transitions, motion elements, face-off, and more.
• It is completely free.

Steps to rotate videos in Filmora:

Simply open the wonder share filmora editing app and import your desired video to time line.

Right click on the imported video and select Rotate 90ccw until video is on your desired direction and you can simply export the video and enjoy it!

Now we have to deal with the elephant in the room: is KM Player superior, or is Wonder Share Filmora more user-friendly in terms of operation and video rotation? In general, both softwares are equally effective at rotating videos and completing tasks, but Wonder Share Filmora appears to be a significantly better and more user-friendly option. Wonder Share Filmora is powerful video editing software that allows you to learn more about video editing and take your skills to a higher level of proficiency.

Step 4: After that, press the menu button and then select the “View” tab from the drop-down menu.

Step 5: Hover your mouse cursor over the tab to reveal a list of additional options.

Step 6: you must select the Rotate tab from the list of available options. This will allow you to choose another option.

Step 07: Use Flip Image 180 degree to flip the image.

Step 8: To rotate the video in correct position, use Mirror Image (180) tab. You can also change the angle at which the video is displayed.

Your video is ready to watch peacefully.

Troubleshooting Problems with KMPlayer if Rotate Video Not Working

Despite the fact that you’ve seen that KMPlayer can rotate and edit videos, there are some disadvantages to using this particular video player. The following are some of the most frequently encountered issues when using KMPlayer to rotate video.

• After rotating a video, the video appears without a black bar, which may be irritating to some of you who are used to seeing black bars. In addition, there is no workaround for this because it is the default setting of the software.
• You may occasionally receive an error message such as “class not registered,” which will cause your videos to be closed while you are watching them.
• Additionally, the screen may turn blue.
• The message “Login required” appears from time to time, which is a source of considerable irritation.
• It is also not uncommon to see that some portions of a media file are able to run while other portions of the same media file are unable to run.

If we talk about reliable and affordable alternatives to KM Player, Wonder Share Filmora is the best alternative for rotating videos.

Despite the fact that it is one of the most user-friendly pieces of software currently available, this video spinning software achieves its goal without sacrificing image quality in the process. People with little or no experience in video creation, on the other hand, will find the Filmora video editing application to be a simple and straightforward tool that anyone can use.

Users have been experiencing difficulties while editing films on the platform, according to the company, and the most recent update to Filmora includes a new manual rotation option in the video editing interface, which the company claims will alleviate this issue.

As a result, users no longer have to be concerned about films reverting to their original position when exporting videos to other formats because they can rotate videos to any angle they desire.

An Easier Way to Rotate Video with Filmora

After learning about the problems with KMPlayer, it’s very likely that you’re looking for a great alternative that will allow you to rotate your videos flawlessly. Don’t worry, because there’s a fantastic tool called Filmora Video Editor for Windows (or Filmora Video Editor for Mac) that can go the extra mile when it comes to video editing. You’ll be astounded by the extensive selection of video editing tools available in the software.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Beginners will find it easy to use because it has a simple interface to begin with.

• It allows you to edit videos in any format and from any device.
• It provides you with simple tools to rotate, trim, combine, split, and crop videos.
• It includes free effects such as titles, filters, transitions, motion elements, face-off, and more.
• It is completely free.

Steps to rotate videos in Filmora:

Simply open the wonder share filmora editing app and import your desired video to time line.

Right click on the imported video and select Rotate 90ccw until video is on your desired direction and you can simply export the video and enjoy it!

Now we have to deal with the elephant in the room: is KM Player superior, or is Wonder Share Filmora more user-friendly in terms of operation and video rotation? In general, both softwares are equally effective at rotating videos and completing tasks, but Wonder Share Filmora appears to be a significantly better and more user-friendly option. Wonder Share Filmora is powerful video editing software that allows you to learn more about video editing and take your skills to a higher level of proficiency.

Step 4: After that, press the menu button and then select the “View” tab from the drop-down menu.

Step 5: Hover your mouse cursor over the tab to reveal a list of additional options.

Step 6: you must select the Rotate tab from the list of available options. This will allow you to choose another option.

Step 07: Use Flip Image 180 degree to flip the image.

Step 8: To rotate the video in correct position, use Mirror Image (180) tab. You can also change the angle at which the video is displayed.

Your video is ready to watch peacefully.

Troubleshooting Problems with KMPlayer if Rotate Video Not Working

Despite the fact that you’ve seen that KMPlayer can rotate and edit videos, there are some disadvantages to using this particular video player. The following are some of the most frequently encountered issues when using KMPlayer to rotate video.

• After rotating a video, the video appears without a black bar, which may be irritating to some of you who are used to seeing black bars. In addition, there is no workaround for this because it is the default setting of the software.
• You may occasionally receive an error message such as “class not registered,” which will cause your videos to be closed while you are watching them.
• Additionally, the screen may turn blue.
• The message “Login required” appears from time to time, which is a source of considerable irritation.
• It is also not uncommon to see that some portions of a media file are able to run while other portions of the same media file are unable to run.

If we talk about reliable and affordable alternatives to KM Player, Wonder Share Filmora is the best alternative for rotating videos.

Despite the fact that it is one of the most user-friendly pieces of software currently available, this video spinning software achieves its goal without sacrificing image quality in the process. People with little or no experience in video creation, on the other hand, will find the Filmora video editing application to be a simple and straightforward tool that anyone can use.

Users have been experiencing difficulties while editing films on the platform, according to the company, and the most recent update to Filmora includes a new manual rotation option in the video editing interface, which the company claims will alleviate this issue.

As a result, users no longer have to be concerned about films reverting to their original position when exporting videos to other formats because they can rotate videos to any angle they desire.

An Easier Way to Rotate Video with Filmora

After learning about the problems with KMPlayer, it’s very likely that you’re looking for a great alternative that will allow you to rotate your videos flawlessly. Don’t worry, because there’s a fantastic tool called Filmora Video Editor for Windows (or Filmora Video Editor for Mac) that can go the extra mile when it comes to video editing. You’ll be astounded by the extensive selection of video editing tools available in the software.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Beginners will find it easy to use because it has a simple interface to begin with.

• It allows you to edit videos in any format and from any device.
• It provides you with simple tools to rotate, trim, combine, split, and crop videos.
• It includes free effects such as titles, filters, transitions, motion elements, face-off, and more.
• It is completely free.

Steps to rotate videos in Filmora:

Simply open the wonder share filmora editing app and import your desired video to time line.

Right click on the imported video and select Rotate 90ccw until video is on your desired direction and you can simply export the video and enjoy it!

Now we have to deal with the elephant in the room: is KM Player superior, or is Wonder Share Filmora more user-friendly in terms of operation and video rotation? In general, both softwares are equally effective at rotating videos and completing tasks, but Wonder Share Filmora appears to be a significantly better and more user-friendly option. Wonder Share Filmora is powerful video editing software that allows you to learn more about video editing and take your skills to a higher level of proficiency.

How To Achieve LumaFusion Color Grading Through LUTs

LumaFusion is one of the best-known apps to enhance video quality without impacting the overlays. With this app, you can modify the video in several ways, such as applying LUTs to videos and synchronizing MultiCam clips. Yet, many users find it challenging to use LumaFusion to color grade the clips.

In this discussion, we will discuss color grading in LumaFusion and the procedure to use it. Moreover, we will also introduce an app that can streamline your workflow efficiency. The name of this app is Wondershare Filmora, and it will also help you to apply LUTs on computers.

Part 1: How Do LUTs Make Work Operation Easy?

Before getting into the free LUTs for LumaFusion, it is important to know the higher functionality of LUTs. If you are new to the field of video editing, you may have no idea how LUTs can improve your work operation. This section will help you to understand it without complications:

• Modern Styles and Looks: LUTs offers predefined and modernized styles and look that are created by specialists. As these LUTs have prebuilt color grading techniques along with file emulation, you can use them to increase the attractiveness of videos.
• Higher Workflow Efficiency: The prebuilt LUTs can make your work easier than ever. You can apply the LUTs to the videos in the simplest manner, along with saving time and effort.
• Compatibility of LUTs: There are no such device restrictions in LUTs, as you can use them on computers or mobile devices. Above all, LUTs are also compatible with several video editing software.
• Customization and Experimentation: While using the LUTs, you can customize them as per your needs without any problem. Other than this, you can also experiment the creativity and visual styles with LUTs.

Empower your videos with a new mood using different LUTs. Filmora now offers 100+ top-quality 3D LUTs cover a broad range of scenarios. Transform your videos with Filmora’s powerful 3D LUTs.

Apply LUT on Videos Apply LUT on Videos Learn More

Try It Free >>

Part 2: What Are the Potential Ways to Apply LUTs for LumaFusion?

There are considerable ways to apply LUTs in LumaFusion, but we plan to introduce the most straightforward ways. Don’t fret if you have no video editing skills. By following the below-given steps, you can experience the LumaFusion color grading:

• Way 1: Apply LUTs Through Sharing
• Way 2: Apply LUTs Through LUT Name

Way 1: Apply LUTs Through Sharing

Step 1: Initially, import the video to LumaFusion and double-tap on a video in “Timeline.” Select the “Color and Effect” icon from the bottom and redirect to the “Cube” icon on the top.

Step 2: Next, tap on the “Import” button, and once you are on the “Thank You” page, select the “Download Link” button. Following this, hit “Copy to ZIP,” and after this, the ZIP folders will be loaded in the app.

Step 3: To proceed, you have to “Unzip the Folder” and locate the LUTs of your choice. Once you find the LUT, press the “Share” icon and tap “Open in LumaFusion.” Following this, the LUT will be added in LumaFusion.

Way 2: Apply LUTs Through LUT Name

Step 1: Open the video with LumaFusion and select “Timeline.” Tap on the “Color and Effect” sign and select the “Import” button. Following this, you need to select a tool for importing LUTs from the options of Box, Dropbox, Google Drive, Files, or Add/Edit Source.

Step 2: After selecting the source, tap on “LUT name” to add it to LumaFusion. To proceed, press the “Share” button and wait a few moments. Once the LUT is added, you can manage its intensity from the “Blend” sliders.

Part 3: Some Best LUTs To Discover For Using in LumaFusion

Now that you know the higher functionality of LUTs and their application procedure, you must be wondering what LUTs are best for LumaFusion. There is no need to be anxious, as this part will introduce some of the free LUTs for LumaFusion. Look below to learn more about these exceptional video editing elements:

1. Color Grading Central Free LUTs

If you want to add the best color grading LumaFusion LUTs, you need to seek help from the color specialist. Thus, you can use the Color Grading free LUTs designed by CGC. Their site is enriched with high definition and optimized color combinate LUTs. You will never get disappointed by using these LUTs as they never impact the content of the videos.

2. Frank Glencairn Free LUT

If you are still a fan of vintage films in this modernized and vibrant-colored world, this LUT is for you. With this, you can add a fantastic and realistic vintage look to any video. Other than this, it is very popular among filmmakers for introducing a backstory scene in films. Not only professional, but you can also use it to give a retro look to your videos.

3. Reverse Tree Media Free LUTs

With this absolutely free LUT, you can upgrade the quality of your videos with little effort. It also has very modernized LUTs utility, such as the Black Bar layer. You can use this to enhance the video quality of several types of videos, such as TV series or movies. It is quite a perfect pick for sad or backstory scenes. In addition to this, it also has 8mm, 16mm, and 35mm overlays.

4. Kodachrome-K-Tone LUT

With the help of this LUT, you can feel yourself in the era of the early 90s. It has mass-marketed colors along with a subtractive method, which makes it a better option. Moreover, this LUT can also escalate the captivity of promotional videos. You can also use it for magazine photo editing. If you are working on a video captured in low light, this can also fix all the coloring issues for you.

5. SmallHD Free LUTs

Another frequently used LumaFusion LUTs is SmallHD-free LUTs which can maximize your video productivity effectively. It can enhance the classical appearance of the videos. You can use it for both pre and postproduction enhancements. These LUTs give you both dramatic and cinematic vibes. You can apply it to action, thriller, melodramatic or other videos.

Part 4: Wondershare Filmora: Apply LUTs Easily on the Computer

Wondershare Filmora is a tool that gives you freedom of creativity without any complications. With this tool, you can modify your videos in several ways on Mac, Windows, or mobile devices. Filmora also has versatile video editing software to help new video editors in their professional journey. The AI tools present in Filmora have stunning effects on every user, as they can make your work easier than ever.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

For example, by using its AI Image, you can turn simple words into images. You can also split the screen and manage the keyframes of your video. One of the best things about Filmora is it lets you edit videos with full customization.

Key Features of Wondershare Filmora

• If you want to track the moments of the objects in the video, the Motion Tracking feature of Filmora got you covered. You can also add Mosaic effects to moving characters or objects in a video.
• There are diversified preset templates in Filmora through which you can make the video with a few taps. You are also free to create your own video template and share it with the world.
• With Filmora, you can edit multiple videos at once, as it supports the batch edit feature. Moreover, you can also add adjustment layers in the video to make non-destructive edits.

Conclusion

As this article states, you can turn simple videos into attractive ones with color-grading LumaFusion LUTs. There are several things that define the higher functionality of LUTs, and you can see the points above. Moreover, the instructions to apply LUTs with LumaFusion are also discussed above for the ease of users.

There are two ways available to achieve color grading, out of which you can select any one of your preferences. The other tool that can help you to apply LUTs on the computer is Wondershare Filmora . You can learn more about this from the above discussion.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Apply LUT on Videos Apply LUT on Videos Learn More

Try It Free >>

Part 2: What Are the Potential Ways to Apply LUTs for LumaFusion?

There are considerable ways to apply LUTs in LumaFusion, but we plan to introduce the most straightforward ways. Don’t fret if you have no video editing skills. By following the below-given steps, you can experience the LumaFusion color grading:

• Way 1: Apply LUTs Through Sharing
• Way 2: Apply LUTs Through LUT Name

Way 1: Apply LUTs Through Sharing

Step 1: Initially, import the video to LumaFusion and double-tap on a video in “Timeline.” Select the “Color and Effect” icon from the bottom and redirect to the “Cube” icon on the top.

Step 2: Next, tap on the “Import” button, and once you are on the “Thank You” page, select the “Download Link” button. Following this, hit “Copy to ZIP,” and after this, the ZIP folders will be loaded in the app.

Step 3: To proceed, you have to “Unzip the Folder” and locate the LUTs of your choice. Once you find the LUT, press the “Share” icon and tap “Open in LumaFusion.” Following this, the LUT will be added in LumaFusion.

Way 2: Apply LUTs Through LUT Name

Step 1: Open the video with LumaFusion and select “Timeline.” Tap on the “Color and Effect” sign and select the “Import” button. Following this, you need to select a tool for importing LUTs from the options of Box, Dropbox, Google Drive, Files, or Add/Edit Source.

Step 2: After selecting the source, tap on “LUT name” to add it to LumaFusion. To proceed, press the “Share” button and wait a few moments. Once the LUT is added, you can manage its intensity from the “Blend” sliders.

Part 3: Some Best LUTs To Discover For Using in LumaFusion

Now that you know the higher functionality of LUTs and their application procedure, you must be wondering what LUTs are best for LumaFusion. There is no need to be anxious, as this part will introduce some of the free LUTs for LumaFusion. Look below to learn more about these exceptional video editing elements:

1. Color Grading Central Free LUTs

If you want to add the best color grading LumaFusion LUTs, you need to seek help from the color specialist. Thus, you can use the Color Grading free LUTs designed by CGC. Their site is enriched with high definition and optimized color combinate LUTs. You will never get disappointed by using these LUTs as they never impact the content of the videos.

2. Frank Glencairn Free LUT

If you are still a fan of vintage films in this modernized and vibrant-colored world, this LUT is for you. With this, you can add a fantastic and realistic vintage look to any video. Other than this, it is very popular among filmmakers for introducing a backstory scene in films. Not only professional, but you can also use it to give a retro look to your videos.

3. Reverse Tree Media Free LUTs

With this absolutely free LUT, you can upgrade the quality of your videos with little effort. It also has very modernized LUTs utility, such as the Black Bar layer. You can use this to enhance the video quality of several types of videos, such as TV series or movies. It is quite a perfect pick for sad or backstory scenes. In addition to this, it also has 8mm, 16mm, and 35mm overlays.

4. Kodachrome-K-Tone LUT

With the help of this LUT, you can feel yourself in the era of the early 90s. It has mass-marketed colors along with a subtractive method, which makes it a better option. Moreover, this LUT can also escalate the captivity of promotional videos. You can also use it for magazine photo editing. If you are working on a video captured in low light, this can also fix all the coloring issues for you.

5. SmallHD Free LUTs

Another frequently used LumaFusion LUTs is SmallHD-free LUTs which can maximize your video productivity effectively. It can enhance the classical appearance of the videos. You can use it for both pre and postproduction enhancements. These LUTs give you both dramatic and cinematic vibes. You can apply it to action, thriller, melodramatic or other videos.

Part 4: Wondershare Filmora: Apply LUTs Easily on the Computer

Wondershare Filmora is a tool that gives you freedom of creativity without any complications. With this tool, you can modify your videos in several ways on Mac, Windows, or mobile devices. Filmora also has versatile video editing software to help new video editors in their professional journey. The AI tools present in Filmora have stunning effects on every user, as they can make your work easier than ever.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

For example, by using its AI Image, you can turn simple words into images. You can also split the screen and manage the keyframes of your video. One of the best things about Filmora is it lets you edit videos with full customization.

Key Features of Wondershare Filmora

• If you want to track the moments of the objects in the video, the Motion Tracking feature of Filmora got you covered. You can also add Mosaic effects to moving characters or objects in a video.
• There are diversified preset templates in Filmora through which you can make the video with a few taps. You are also free to create your own video template and share it with the world.
• With Filmora, you can edit multiple videos at once, as it supports the batch edit feature. Moreover, you can also add adjustment layers in the video to make non-destructive edits.

Conclusion

As this article states, you can turn simple videos into attractive ones with color-grading LumaFusion LUTs. There are several things that define the higher functionality of LUTs, and you can see the points above. Moreover, the instructions to apply LUTs with LumaFusion are also discussed above for the ease of users.

There are two ways available to achieve color grading, out of which you can select any one of your preferences. The other tool that can help you to apply LUTs on the computer is Wondershare Filmora . You can learn more about this from the above discussion.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Also read: