How to Edit A Time Lapse Video on iPhone?

Versatile Video Editor - Wondershare Filmora

An easy and powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Do you want to edit a time lapse video on an iPhone or want to know how to shoot a time-lapse video? If so, you’ve come to the right place.

Time-lapses, which show how much something changes over a period of time are some of the coolest videos you can make.

They aren’t exactly easy to make and edit at first, but we’ve put together this guide to take you through the steps. We’ll give you a few time lapse video ideas, steps to shoot them, and good practices for managing your footage after you’ve shot it.

Let’s get started.

What Is A Time Lapse Video?

In its simplest definition, a time lapse video is a cinematography technique where the frequency at which film frames are captured (the frame rate) is much lower than that used to view the sequence.

When played at normal speed, time appears to be moving faster and thus lapsing. For example, an image of a scene may be captured once every second, then played back at 30 frames per second; the result is an apparent 30 times speed increase.

Time-lapse photography can be considered to be the opposite of slow motion.

How to Shoot A Time-Lapse Video?

Subjects to shoot in a time-lapse video

Wondering what can be shot in a time-lapse video? The answer is any subject that moves, grows, decays, or changes. But what’s more important than the subject is the motion and change that it goes through.

When shooting a time-lapse video, you are composing not only the shot but also the movement of the subject. If a subject doesn’t move or change throughout your film, then it is just a regular video. So try to think of subjects that are constantly moving or changing.

Time-Lapse videos are visually appealing and easy to make. When it comes to subjects that can be chosen to shoot in a time-lapse video, the possibilities are endless. But if you’re stuck for ideas, here are 10 suggestions to get you started:

1. Sunset/Sunrise

These are quite possibly the most common subjects for timelapse videos, but there’s a reason for it! Watching the sun go up and down is always mesmerizing.

2. Clouds

Clouds move very slowly most of the time, making them perfect for time-lapse sequences. You can shoot a single cloud passing overhead, or record a passing storm front as it sweeps across the sky. Depending on the weather conditions and movement of clouds, this can look stunning or simply spectacular!

3. Starry sky

Probably one of the most fascinating time lapse videos is the ones with stars on the move. Time-lapses that capture the Milky Way or starry sky are becoming increasingly popular as camera technology improves. There are even some cameras now that have built-in settings specifically for capturing stars and other celestial bodies.

4. Flowers

Flowers blooming is another fantastic subject for time-lapse photography. The change can be incredibly subtle; however, if you shoot a timelapse over several days or weeks, you will be amazed at just how much they grow and change!

5. Season changing

The most obvious example is trees budding and shedding leaves, but all sorts of plants and animals follow seasonal cycles. You can see flowers blooming, grasses growing, and migrating birds. Even if you don’t have a chance to go somewhere exotic for your subject matter, you can find something interesting right outside your own door.

6. Cars or Pedestrians

If you want something a little more exciting then you can choose things like cars passing by or people walking on the street.

7. Cooking dinner

Got a recipe for dinner that has lots of steps? Rather than just snap photos of the process, why not make a time-lapse video instead? It’s easy and fun to do, especially if you have kids who can help you out!

8. DIY projects

Are you building something? Whether it’s a new table, shelves, or whatever else, set up your camera and take photos as you go along in a time lapse mode and you’ll get a fun time lapse video. It works well to show people how it all came together.

9. Construction work in progress

If you’re watching construction work being done on your property or nearby, consider recording its time lapse video. It’s hard to imagine the amount of resources it takes to construct an office building or skyscraper before it’s finished. Time-lapse videos have helped reveal just how much work goes into something like that.

10. A fun art project

Capturing a time lapse video of an art project can make a mesmerizing video. Whether it’s you or someone else doing the artwork, always capture its time lapse video to show to others what goes into completing an art project. All you need to do is to set your camera up on a tripod aimed at the canvas and capture one or two frames per second to get an excellent time lapse video.

Steps to shoot a time-lapse video

Time-lapse videography is something that most photographers and videographers are familiar with. But, shooting a time-lapse video needs more than setting the camera on a tripod and waiting for it to shoot for several hours.

The amazing thing about time-lapse videos is that they can be shot using your smartphone. There are apps and built-in camera settings to capture time lapse videos with just a click of the button.

If you want to create a time-lapse video that is high quality, you have to use professional cameras, and learn some important steps.

1. Decide on a subject

The movement of clouds, a sunrise or sunset, waves crashing at the beach, cars coming and going in your parking lot, people walking around your office building — all of these subjects can yield great time-lapse sequences.

2. Find a place to set up your camera on tripod

While recording a time-lapse video, it’s important to keep the camera as stable as possible. It ensures a smooth video, making it visually appealing and easy to edit post-shooting. Typically, a tripod is needed for stable recording. If you are not using a tripod, find something steady and level to set it upon.

Important tip: Shoot only with manual settings. You don’t want the camera to adjust for you; rather, you should adjust the camera settings so that it takes optimal pictures. Even if you use auto mode, make sure you take control of the camera and push it to its limits to get great shots.

3. Set the camera focus

Use either autofocus or manual focus to make sure the camera is focused on what you want to be the main subject of the video.

4. Set your exposure settings

Depending on how much the light is going to change over time, you may want to use aperture priority or shutter priority so that the camera will automatically adjust for changes in light. Or, if you know exactly how much light will be changing over time, you could set all exposure settings manually.

5. Calculate how many frames and shots are needed

For example, if you are shooting at 10 frames per second and want a total of 30 seconds of video at 24 fps (which is standard), you will need 720 frames/photos (30 seconds x 24 fps = 720 frames).

6. Import and stitch together

Once you’ve captured the images, import them into a video editing software, stitch them together, and perform necessary editing.

How to Edit The Time Lapse on iPhone?

Now that you’ve recorded a time-lapse video, you might watch it and think it’s slower or faster than you want it to be. Fortunately, you can speed up and slow down the time lapse video on iPhone using iMovie.

Let’s see how to slow down time lapse on iPhone iMovie.

1. Speed up The Time Lapse on iPhone

So you’ve taken a time lapse video on your iPhone and now you’re trying to get it to speed up in iMovie but it looks a little jumpy or there is too much footage. Here’s how to do it in iMovie for iOS.

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select the recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To speed up the time-lapse video, move the slider to the right side and you’ll see the duration of the video reduced, indicating time-lapse video has been sped up.

• Now click the Play button to preview and then tap Done.

Once you’ve increased the speed of time-lapse video, you can share it and post it where you want.

2. Slow Down The Time Lapse on iPhone

Just like you can speed up the time-lapse video on an iPhone, iMovie lets you slow down the time-lapse video.

Here’s how you can do it:

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select your recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To slow down the time-lapse video, move the slider to the left side and you’ll see the duration of the video increased, indicating time-lapse video has been slowed down.

• Now click the Play button to preview and then tap Done.

Advanced Software: Edit A Time Lapse Video in Wondershare Filmora

If you have professionally captured RAW images of the time-lapse video, you need to use advanced software to stitch them together. That’s where Wondershare Filmora comes into play.

Wondershare Filmore is a professional video editing software with a wide variety of basic to advanced-level editing tools. It allows for turning RAW videos into fun, engaging, and professional videos.

If you need to refine your time-lapse video, you can use it and benefit from its capabilities. Similarly, you can use it to speed up or slow down your time-lapse video.

Let’s see how you can do both with Filmora.

Speed up your time-lapse video

Why speed up a time-lapse in the first place? There are a couple of reasons you might want to speed up your time-lapse.

When shooting with a fast lens, you might want to dial down the shutter speed to achieve more motion blur, to make the scenes more interesting. However, doing so can also create motion blur on time-lapse footage when sped up.

Another reason you might want to speed up your time-lapse is when you have too many frames. When you shoot at low frame rate (e.g. 15 FPS), not everyone will experience the same viewing quality if they don’t have high frame rate monitors. Speeding up the footage is one way to reduce the number of frames without compromising the quality of your video.

Follow these steps to speed up the time-lapse video using Filmora:

• Download and install Wondershare Filmora on your computer.
• Launch Filmora and click the New project button to open the video editor or drag and drop the file directly.

• Once imported, drag the file to the timeline.

• Click the Speed icon and select the Fast option. Select 2x, 4x, 8x, etc, depending on how much you want to speed up.

• Save the file and use it the way you want.

Slow down your time-lapse video

As the speed at which your time-lapse moves increases, so does the amount of motion blur. This can make for an undesirable look, especially in shots where there is already a lot of movement.

The best way to avoid this is to slow down your time-lapse as much as possible while still maintaining an interesting level of movement within your shot.

You can slow down your time-lapse video in Filmora following the same process as you’d do for speeding-up the video (Explained above). However, there’s only one catch; instead of opting for the Fast option choose Slow when you’re at step 4.

Conclusion

Hopefully, this guide has provided a good knowledge of how to put together your own time lapse video – and how to edit it on iPhone and Wondershare Filmora. It’s easier than you may think, and the resulting videos are quite impressive.

Take your time with it, record your movies from different angles, and don’t be afraid to create something unique and experimental.

Try It Free Try It Free

Try It Free Try It Free

Do you want to edit a time lapse video on an iPhone or want to know how to shoot a time-lapse video? If so, you’ve come to the right place.

Time-lapses, which show how much something changes over a period of time are some of the coolest videos you can make.

They aren’t exactly easy to make and edit at first, but we’ve put together this guide to take you through the steps. We’ll give you a few time lapse video ideas, steps to shoot them, and good practices for managing your footage after you’ve shot it.

Let’s get started.

What Is A Time Lapse Video?

In its simplest definition, a time lapse video is a cinematography technique where the frequency at which film frames are captured (the frame rate) is much lower than that used to view the sequence.

When played at normal speed, time appears to be moving faster and thus lapsing. For example, an image of a scene may be captured once every second, then played back at 30 frames per second; the result is an apparent 30 times speed increase.

Time-lapse photography can be considered to be the opposite of slow motion.

How to Shoot A Time-Lapse Video?

Subjects to shoot in a time-lapse video

Wondering what can be shot in a time-lapse video? The answer is any subject that moves, grows, decays, or changes. But what’s more important than the subject is the motion and change that it goes through.

When shooting a time-lapse video, you are composing not only the shot but also the movement of the subject. If a subject doesn’t move or change throughout your film, then it is just a regular video. So try to think of subjects that are constantly moving or changing.

Time-Lapse videos are visually appealing and easy to make. When it comes to subjects that can be chosen to shoot in a time-lapse video, the possibilities are endless. But if you’re stuck for ideas, here are 10 suggestions to get you started:

1. Sunset/Sunrise

These are quite possibly the most common subjects for timelapse videos, but there’s a reason for it! Watching the sun go up and down is always mesmerizing.

2. Clouds

Clouds move very slowly most of the time, making them perfect for time-lapse sequences. You can shoot a single cloud passing overhead, or record a passing storm front as it sweeps across the sky. Depending on the weather conditions and movement of clouds, this can look stunning or simply spectacular!

3. Starry sky

Probably one of the most fascinating time lapse videos is the ones with stars on the move. Time-lapses that capture the Milky Way or starry sky are becoming increasingly popular as camera technology improves. There are even some cameras now that have built-in settings specifically for capturing stars and other celestial bodies.

4. Flowers

Flowers blooming is another fantastic subject for time-lapse photography. The change can be incredibly subtle; however, if you shoot a timelapse over several days or weeks, you will be amazed at just how much they grow and change!

5. Season changing

The most obvious example is trees budding and shedding leaves, but all sorts of plants and animals follow seasonal cycles. You can see flowers blooming, grasses growing, and migrating birds. Even if you don’t have a chance to go somewhere exotic for your subject matter, you can find something interesting right outside your own door.

6. Cars or Pedestrians

If you want something a little more exciting then you can choose things like cars passing by or people walking on the street.

7. Cooking dinner

Got a recipe for dinner that has lots of steps? Rather than just snap photos of the process, why not make a time-lapse video instead? It’s easy and fun to do, especially if you have kids who can help you out!

8. DIY projects

Are you building something? Whether it’s a new table, shelves, or whatever else, set up your camera and take photos as you go along in a time lapse mode and you’ll get a fun time lapse video. It works well to show people how it all came together.

9. Construction work in progress

If you’re watching construction work being done on your property or nearby, consider recording its time lapse video. It’s hard to imagine the amount of resources it takes to construct an office building or skyscraper before it’s finished. Time-lapse videos have helped reveal just how much work goes into something like that.

10. A fun art project

Capturing a time lapse video of an art project can make a mesmerizing video. Whether it’s you or someone else doing the artwork, always capture its time lapse video to show to others what goes into completing an art project. All you need to do is to set your camera up on a tripod aimed at the canvas and capture one or two frames per second to get an excellent time lapse video.

Steps to shoot a time-lapse video

Time-lapse videography is something that most photographers and videographers are familiar with. But, shooting a time-lapse video needs more than setting the camera on a tripod and waiting for it to shoot for several hours.

The amazing thing about time-lapse videos is that they can be shot using your smartphone. There are apps and built-in camera settings to capture time lapse videos with just a click of the button.

If you want to create a time-lapse video that is high quality, you have to use professional cameras, and learn some important steps.

1. Decide on a subject

The movement of clouds, a sunrise or sunset, waves crashing at the beach, cars coming and going in your parking lot, people walking around your office building — all of these subjects can yield great time-lapse sequences.

2. Find a place to set up your camera on tripod

While recording a time-lapse video, it’s important to keep the camera as stable as possible. It ensures a smooth video, making it visually appealing and easy to edit post-shooting. Typically, a tripod is needed for stable recording. If you are not using a tripod, find something steady and level to set it upon.

Important tip: Shoot only with manual settings. You don’t want the camera to adjust for you; rather, you should adjust the camera settings so that it takes optimal pictures. Even if you use auto mode, make sure you take control of the camera and push it to its limits to get great shots.

3. Set the camera focus

Use either autofocus or manual focus to make sure the camera is focused on what you want to be the main subject of the video.

4. Set your exposure settings

Depending on how much the light is going to change over time, you may want to use aperture priority or shutter priority so that the camera will automatically adjust for changes in light. Or, if you know exactly how much light will be changing over time, you could set all exposure settings manually.

5. Calculate how many frames and shots are needed

For example, if you are shooting at 10 frames per second and want a total of 30 seconds of video at 24 fps (which is standard), you will need 720 frames/photos (30 seconds x 24 fps = 720 frames).

6. Import and stitch together

Once you’ve captured the images, import them into a video editing software, stitch them together, and perform necessary editing.

How to Edit The Time Lapse on iPhone?

Now that you’ve recorded a time-lapse video, you might watch it and think it’s slower or faster than you want it to be. Fortunately, you can speed up and slow down the time lapse video on iPhone using iMovie.

Let’s see how to slow down time lapse on iPhone iMovie.

1. Speed up The Time Lapse on iPhone

So you’ve taken a time lapse video on your iPhone and now you’re trying to get it to speed up in iMovie but it looks a little jumpy or there is too much footage. Here’s how to do it in iMovie for iOS.

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select the recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To speed up the time-lapse video, move the slider to the right side and you’ll see the duration of the video reduced, indicating time-lapse video has been sped up.

• Now click the Play button to preview and then tap Done.

Once you’ve increased the speed of time-lapse video, you can share it and post it where you want.

2. Slow Down The Time Lapse on iPhone

Just like you can speed up the time-lapse video on an iPhone, iMovie lets you slow down the time-lapse video.

Here’s how you can do it:

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select your recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To slow down the time-lapse video, move the slider to the left side and you’ll see the duration of the video increased, indicating time-lapse video has been slowed down.

• Now click the Play button to preview and then tap Done.

Advanced Software: Edit A Time Lapse Video in Wondershare Filmora

If you have professionally captured RAW images of the time-lapse video, you need to use advanced software to stitch them together. That’s where Wondershare Filmora comes into play.

Wondershare Filmore is a professional video editing software with a wide variety of basic to advanced-level editing tools. It allows for turning RAW videos into fun, engaging, and professional videos.

If you need to refine your time-lapse video, you can use it and benefit from its capabilities. Similarly, you can use it to speed up or slow down your time-lapse video.

Let’s see how you can do both with Filmora.

Speed up your time-lapse video

Why speed up a time-lapse in the first place? There are a couple of reasons you might want to speed up your time-lapse.

When shooting with a fast lens, you might want to dial down the shutter speed to achieve more motion blur, to make the scenes more interesting. However, doing so can also create motion blur on time-lapse footage when sped up.

Another reason you might want to speed up your time-lapse is when you have too many frames. When you shoot at low frame rate (e.g. 15 FPS), not everyone will experience the same viewing quality if they don’t have high frame rate monitors. Speeding up the footage is one way to reduce the number of frames without compromising the quality of your video.

Follow these steps to speed up the time-lapse video using Filmora:

• Download and install Wondershare Filmora on your computer.
• Launch Filmora and click the New project button to open the video editor or drag and drop the file directly.

• Once imported, drag the file to the timeline.

• Click the Speed icon and select the Fast option. Select 2x, 4x, 8x, etc, depending on how much you want to speed up.

• Save the file and use it the way you want.

Slow down your time-lapse video

As the speed at which your time-lapse moves increases, so does the amount of motion blur. This can make for an undesirable look, especially in shots where there is already a lot of movement.

The best way to avoid this is to slow down your time-lapse as much as possible while still maintaining an interesting level of movement within your shot.

You can slow down your time-lapse video in Filmora following the same process as you’d do for speeding-up the video (Explained above). However, there’s only one catch; instead of opting for the Fast option choose Slow when you’re at step 4.

Conclusion

Hopefully, this guide has provided a good knowledge of how to put together your own time lapse video – and how to edit it on iPhone and Wondershare Filmora. It’s easier than you may think, and the resulting videos are quite impressive.

Take your time with it, record your movies from different angles, and don’t be afraid to create something unique and experimental.

Try It Free Try It Free

Try It Free Try It Free

Do you want to edit a time lapse video on an iPhone or want to know how to shoot a time-lapse video? If so, you’ve come to the right place.

Time-lapses, which show how much something changes over a period of time are some of the coolest videos you can make.

They aren’t exactly easy to make and edit at first, but we’ve put together this guide to take you through the steps. We’ll give you a few time lapse video ideas, steps to shoot them, and good practices for managing your footage after you’ve shot it.

Let’s get started.

What Is A Time Lapse Video?

In its simplest definition, a time lapse video is a cinematography technique where the frequency at which film frames are captured (the frame rate) is much lower than that used to view the sequence.

When played at normal speed, time appears to be moving faster and thus lapsing. For example, an image of a scene may be captured once every second, then played back at 30 frames per second; the result is an apparent 30 times speed increase.

Time-lapse photography can be considered to be the opposite of slow motion.

How to Shoot A Time-Lapse Video?

Subjects to shoot in a time-lapse video

Wondering what can be shot in a time-lapse video? The answer is any subject that moves, grows, decays, or changes. But what’s more important than the subject is the motion and change that it goes through.

When shooting a time-lapse video, you are composing not only the shot but also the movement of the subject. If a subject doesn’t move or change throughout your film, then it is just a regular video. So try to think of subjects that are constantly moving or changing.

Time-Lapse videos are visually appealing and easy to make. When it comes to subjects that can be chosen to shoot in a time-lapse video, the possibilities are endless. But if you’re stuck for ideas, here are 10 suggestions to get you started:

1. Sunset/Sunrise

These are quite possibly the most common subjects for timelapse videos, but there’s a reason for it! Watching the sun go up and down is always mesmerizing.

2. Clouds

Clouds move very slowly most of the time, making them perfect for time-lapse sequences. You can shoot a single cloud passing overhead, or record a passing storm front as it sweeps across the sky. Depending on the weather conditions and movement of clouds, this can look stunning or simply spectacular!

3. Starry sky

Probably one of the most fascinating time lapse videos is the ones with stars on the move. Time-lapses that capture the Milky Way or starry sky are becoming increasingly popular as camera technology improves. There are even some cameras now that have built-in settings specifically for capturing stars and other celestial bodies.

4. Flowers

Flowers blooming is another fantastic subject for time-lapse photography. The change can be incredibly subtle; however, if you shoot a timelapse over several days or weeks, you will be amazed at just how much they grow and change!

5. Season changing

The most obvious example is trees budding and shedding leaves, but all sorts of plants and animals follow seasonal cycles. You can see flowers blooming, grasses growing, and migrating birds. Even if you don’t have a chance to go somewhere exotic for your subject matter, you can find something interesting right outside your own door.

6. Cars or Pedestrians

If you want something a little more exciting then you can choose things like cars passing by or people walking on the street.

7. Cooking dinner

Got a recipe for dinner that has lots of steps? Rather than just snap photos of the process, why not make a time-lapse video instead? It’s easy and fun to do, especially if you have kids who can help you out!

8. DIY projects

Are you building something? Whether it’s a new table, shelves, or whatever else, set up your camera and take photos as you go along in a time lapse mode and you’ll get a fun time lapse video. It works well to show people how it all came together.

9. Construction work in progress

If you’re watching construction work being done on your property or nearby, consider recording its time lapse video. It’s hard to imagine the amount of resources it takes to construct an office building or skyscraper before it’s finished. Time-lapse videos have helped reveal just how much work goes into something like that.

10. A fun art project

Capturing a time lapse video of an art project can make a mesmerizing video. Whether it’s you or someone else doing the artwork, always capture its time lapse video to show to others what goes into completing an art project. All you need to do is to set your camera up on a tripod aimed at the canvas and capture one or two frames per second to get an excellent time lapse video.

Steps to shoot a time-lapse video

Time-lapse videography is something that most photographers and videographers are familiar with. But, shooting a time-lapse video needs more than setting the camera on a tripod and waiting for it to shoot for several hours.

The amazing thing about time-lapse videos is that they can be shot using your smartphone. There are apps and built-in camera settings to capture time lapse videos with just a click of the button.

If you want to create a time-lapse video that is high quality, you have to use professional cameras, and learn some important steps.

1. Decide on a subject

The movement of clouds, a sunrise or sunset, waves crashing at the beach, cars coming and going in your parking lot, people walking around your office building — all of these subjects can yield great time-lapse sequences.

2. Find a place to set up your camera on tripod

While recording a time-lapse video, it’s important to keep the camera as stable as possible. It ensures a smooth video, making it visually appealing and easy to edit post-shooting. Typically, a tripod is needed for stable recording. If you are not using a tripod, find something steady and level to set it upon.

Important tip: Shoot only with manual settings. You don’t want the camera to adjust for you; rather, you should adjust the camera settings so that it takes optimal pictures. Even if you use auto mode, make sure you take control of the camera and push it to its limits to get great shots.

3. Set the camera focus

Use either autofocus or manual focus to make sure the camera is focused on what you want to be the main subject of the video.

4. Set your exposure settings

Depending on how much the light is going to change over time, you may want to use aperture priority or shutter priority so that the camera will automatically adjust for changes in light. Or, if you know exactly how much light will be changing over time, you could set all exposure settings manually.

5. Calculate how many frames and shots are needed

For example, if you are shooting at 10 frames per second and want a total of 30 seconds of video at 24 fps (which is standard), you will need 720 frames/photos (30 seconds x 24 fps = 720 frames).

6. Import and stitch together

Once you’ve captured the images, import them into a video editing software, stitch them together, and perform necessary editing.

How to Edit The Time Lapse on iPhone?

Now that you’ve recorded a time-lapse video, you might watch it and think it’s slower or faster than you want it to be. Fortunately, you can speed up and slow down the time lapse video on iPhone using iMovie.

Let’s see how to slow down time lapse on iPhone iMovie.

1. Speed up The Time Lapse on iPhone

So you’ve taken a time lapse video on your iPhone and now you’re trying to get it to speed up in iMovie but it looks a little jumpy or there is too much footage. Here’s how to do it in iMovie for iOS.

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select the recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To speed up the time-lapse video, move the slider to the right side and you’ll see the duration of the video reduced, indicating time-lapse video has been sped up.

• Now click the Play button to preview and then tap Done.

Once you’ve increased the speed of time-lapse video, you can share it and post it where you want.

2. Slow Down The Time Lapse on iPhone

Just like you can speed up the time-lapse video on an iPhone, iMovie lets you slow down the time-lapse video.

Here’s how you can do it:

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select your recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To slow down the time-lapse video, move the slider to the left side and you’ll see the duration of the video increased, indicating time-lapse video has been slowed down.

• Now click the Play button to preview and then tap Done.

Advanced Software: Edit A Time Lapse Video in Wondershare Filmora

If you have professionally captured RAW images of the time-lapse video, you need to use advanced software to stitch them together. That’s where Wondershare Filmora comes into play.

Wondershare Filmore is a professional video editing software with a wide variety of basic to advanced-level editing tools. It allows for turning RAW videos into fun, engaging, and professional videos.

If you need to refine your time-lapse video, you can use it and benefit from its capabilities. Similarly, you can use it to speed up or slow down your time-lapse video.

Let’s see how you can do both with Filmora.

Speed up your time-lapse video

Why speed up a time-lapse in the first place? There are a couple of reasons you might want to speed up your time-lapse.

When shooting with a fast lens, you might want to dial down the shutter speed to achieve more motion blur, to make the scenes more interesting. However, doing so can also create motion blur on time-lapse footage when sped up.

Another reason you might want to speed up your time-lapse is when you have too many frames. When you shoot at low frame rate (e.g. 15 FPS), not everyone will experience the same viewing quality if they don’t have high frame rate monitors. Speeding up the footage is one way to reduce the number of frames without compromising the quality of your video.

Follow these steps to speed up the time-lapse video using Filmora:

• Download and install Wondershare Filmora on your computer.
• Launch Filmora and click the New project button to open the video editor or drag and drop the file directly.

• Once imported, drag the file to the timeline.

• Click the Speed icon and select the Fast option. Select 2x, 4x, 8x, etc, depending on how much you want to speed up.

• Save the file and use it the way you want.

Slow down your time-lapse video

As the speed at which your time-lapse moves increases, so does the amount of motion blur. This can make for an undesirable look, especially in shots where there is already a lot of movement.

The best way to avoid this is to slow down your time-lapse as much as possible while still maintaining an interesting level of movement within your shot.

You can slow down your time-lapse video in Filmora following the same process as you’d do for speeding-up the video (Explained above). However, there’s only one catch; instead of opting for the Fast option choose Slow when you’re at step 4.

Conclusion

Hopefully, this guide has provided a good knowledge of how to put together your own time lapse video – and how to edit it on iPhone and Wondershare Filmora. It’s easier than you may think, and the resulting videos are quite impressive.

Take your time with it, record your movies from different angles, and don’t be afraid to create something unique and experimental.

Try It Free Try It Free

Try It Free Try It Free

Do you want to edit a time lapse video on an iPhone or want to know how to shoot a time-lapse video? If so, you’ve come to the right place.

Time-lapses, which show how much something changes over a period of time are some of the coolest videos you can make.

They aren’t exactly easy to make and edit at first, but we’ve put together this guide to take you through the steps. We’ll give you a few time lapse video ideas, steps to shoot them, and good practices for managing your footage after you’ve shot it.

Let’s get started.

What Is A Time Lapse Video?

In its simplest definition, a time lapse video is a cinematography technique where the frequency at which film frames are captured (the frame rate) is much lower than that used to view the sequence.

When played at normal speed, time appears to be moving faster and thus lapsing. For example, an image of a scene may be captured once every second, then played back at 30 frames per second; the result is an apparent 30 times speed increase.

Time-lapse photography can be considered to be the opposite of slow motion.

How to Shoot A Time-Lapse Video?

Subjects to shoot in a time-lapse video

Wondering what can be shot in a time-lapse video? The answer is any subject that moves, grows, decays, or changes. But what’s more important than the subject is the motion and change that it goes through.

When shooting a time-lapse video, you are composing not only the shot but also the movement of the subject. If a subject doesn’t move or change throughout your film, then it is just a regular video. So try to think of subjects that are constantly moving or changing.

Time-Lapse videos are visually appealing and easy to make. When it comes to subjects that can be chosen to shoot in a time-lapse video, the possibilities are endless. But if you’re stuck for ideas, here are 10 suggestions to get you started:

1. Sunset/Sunrise

These are quite possibly the most common subjects for timelapse videos, but there’s a reason for it! Watching the sun go up and down is always mesmerizing.

2. Clouds

Clouds move very slowly most of the time, making them perfect for time-lapse sequences. You can shoot a single cloud passing overhead, or record a passing storm front as it sweeps across the sky. Depending on the weather conditions and movement of clouds, this can look stunning or simply spectacular!

3. Starry sky

Probably one of the most fascinating time lapse videos is the ones with stars on the move. Time-lapses that capture the Milky Way or starry sky are becoming increasingly popular as camera technology improves. There are even some cameras now that have built-in settings specifically for capturing stars and other celestial bodies.

4. Flowers

Flowers blooming is another fantastic subject for time-lapse photography. The change can be incredibly subtle; however, if you shoot a timelapse over several days or weeks, you will be amazed at just how much they grow and change!

5. Season changing

The most obvious example is trees budding and shedding leaves, but all sorts of plants and animals follow seasonal cycles. You can see flowers blooming, grasses growing, and migrating birds. Even if you don’t have a chance to go somewhere exotic for your subject matter, you can find something interesting right outside your own door.

6. Cars or Pedestrians

If you want something a little more exciting then you can choose things like cars passing by or people walking on the street.

7. Cooking dinner

Got a recipe for dinner that has lots of steps? Rather than just snap photos of the process, why not make a time-lapse video instead? It’s easy and fun to do, especially if you have kids who can help you out!

8. DIY projects

Are you building something? Whether it’s a new table, shelves, or whatever else, set up your camera and take photos as you go along in a time lapse mode and you’ll get a fun time lapse video. It works well to show people how it all came together.

9. Construction work in progress

If you’re watching construction work being done on your property or nearby, consider recording its time lapse video. It’s hard to imagine the amount of resources it takes to construct an office building or skyscraper before it’s finished. Time-lapse videos have helped reveal just how much work goes into something like that.

10. A fun art project

Capturing a time lapse video of an art project can make a mesmerizing video. Whether it’s you or someone else doing the artwork, always capture its time lapse video to show to others what goes into completing an art project. All you need to do is to set your camera up on a tripod aimed at the canvas and capture one or two frames per second to get an excellent time lapse video.

Steps to shoot a time-lapse video

Time-lapse videography is something that most photographers and videographers are familiar with. But, shooting a time-lapse video needs more than setting the camera on a tripod and waiting for it to shoot for several hours.

The amazing thing about time-lapse videos is that they can be shot using your smartphone. There are apps and built-in camera settings to capture time lapse videos with just a click of the button.

If you want to create a time-lapse video that is high quality, you have to use professional cameras, and learn some important steps.

1. Decide on a subject

The movement of clouds, a sunrise or sunset, waves crashing at the beach, cars coming and going in your parking lot, people walking around your office building — all of these subjects can yield great time-lapse sequences.

2. Find a place to set up your camera on tripod

While recording a time-lapse video, it’s important to keep the camera as stable as possible. It ensures a smooth video, making it visually appealing and easy to edit post-shooting. Typically, a tripod is needed for stable recording. If you are not using a tripod, find something steady and level to set it upon.

Important tip: Shoot only with manual settings. You don’t want the camera to adjust for you; rather, you should adjust the camera settings so that it takes optimal pictures. Even if you use auto mode, make sure you take control of the camera and push it to its limits to get great shots.

3. Set the camera focus

Use either autofocus or manual focus to make sure the camera is focused on what you want to be the main subject of the video.

4. Set your exposure settings

Depending on how much the light is going to change over time, you may want to use aperture priority or shutter priority so that the camera will automatically adjust for changes in light. Or, if you know exactly how much light will be changing over time, you could set all exposure settings manually.

5. Calculate how many frames and shots are needed

For example, if you are shooting at 10 frames per second and want a total of 30 seconds of video at 24 fps (which is standard), you will need 720 frames/photos (30 seconds x 24 fps = 720 frames).

6. Import and stitch together

Once you’ve captured the images, import them into a video editing software, stitch them together, and perform necessary editing.

How to Edit The Time Lapse on iPhone?

Now that you’ve recorded a time-lapse video, you might watch it and think it’s slower or faster than you want it to be. Fortunately, you can speed up and slow down the time lapse video on iPhone using iMovie.

Let’s see how to slow down time lapse on iPhone iMovie.

1. Speed up The Time Lapse on iPhone

So you’ve taken a time lapse video on your iPhone and now you’re trying to get it to speed up in iMovie but it looks a little jumpy or there is too much footage. Here’s how to do it in iMovie for iOS.

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select the recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To speed up the time-lapse video, move the slider to the right side and you’ll see the duration of the video reduced, indicating time-lapse video has been sped up.

• Now click the Play button to preview and then tap Done.

Once you’ve increased the speed of time-lapse video, you can share it and post it where you want.

2. Slow Down The Time Lapse on iPhone

Just like you can speed up the time-lapse video on an iPhone, iMovie lets you slow down the time-lapse video.

Here’s how you can do it:

• Launch iMovie on your iPhone and start a new project to speed up the captured time-lapse video.
• Now, tap the plus sign visible at the start of the Projects screen, then select Movie.

• From the next window, find and select your recorded time-lapse video you want to speed up.

• Tap Create Movie button at the center-bottom of the screen.

• Now move the playhead to the start of the timeline and tap to select the video. At this point, you’ll see the timeline highlighted in yellow color.
• Look at the bottom of the screen and you’ll find the Speed icon. Tap the Speed icon and a sliding bar will appear with tortoise on its left side and hare on the right side.

• To slow down the time-lapse video, move the slider to the left side and you’ll see the duration of the video increased, indicating time-lapse video has been slowed down.

• Now click the Play button to preview and then tap Done.

Advanced Software: Edit A Time Lapse Video in Wondershare Filmora

If you have professionally captured RAW images of the time-lapse video, you need to use advanced software to stitch them together. That’s where Wondershare Filmora comes into play.

Wondershare Filmore is a professional video editing software with a wide variety of basic to advanced-level editing tools. It allows for turning RAW videos into fun, engaging, and professional videos.

If you need to refine your time-lapse video, you can use it and benefit from its capabilities. Similarly, you can use it to speed up or slow down your time-lapse video.

Let’s see how you can do both with Filmora.

Speed up your time-lapse video

Why speed up a time-lapse in the first place? There are a couple of reasons you might want to speed up your time-lapse.

When shooting with a fast lens, you might want to dial down the shutter speed to achieve more motion blur, to make the scenes more interesting. However, doing so can also create motion blur on time-lapse footage when sped up.

Another reason you might want to speed up your time-lapse is when you have too many frames. When you shoot at low frame rate (e.g. 15 FPS), not everyone will experience the same viewing quality if they don’t have high frame rate monitors. Speeding up the footage is one way to reduce the number of frames without compromising the quality of your video.

Follow these steps to speed up the time-lapse video using Filmora:

• Download and install Wondershare Filmora on your computer.
• Launch Filmora and click the New project button to open the video editor or drag and drop the file directly.

• Once imported, drag the file to the timeline.

• Click the Speed icon and select the Fast option. Select 2x, 4x, 8x, etc, depending on how much you want to speed up.

• Save the file and use it the way you want.

Slow down your time-lapse video

As the speed at which your time-lapse moves increases, so does the amount of motion blur. This can make for an undesirable look, especially in shots where there is already a lot of movement.

The best way to avoid this is to slow down your time-lapse as much as possible while still maintaining an interesting level of movement within your shot.

You can slow down your time-lapse video in Filmora following the same process as you’d do for speeding-up the video (Explained above). However, there’s only one catch; instead of opting for the Fast option choose Slow when you’re at step 4.

Conclusion

Hopefully, this guide has provided a good knowledge of how to put together your own time lapse video – and how to edit it on iPhone and Wondershare Filmora. It’s easier than you may think, and the resulting videos are quite impressive.

Take your time with it, record your movies from different angles, and don’t be afraid to create something unique and experimental.

Try It Free Try It Free

Special Animated Transition Tutorial【SUPER EASY】

Preparation

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

First off, download the Filmora video editor . After it downloads, click install and follow the provided steps.

Step 2

After installing, the editor will start automatically. When it does, click on the “New Project” button to finally open the editor.

Step 3

From the upper-left side of the screen, click the highlighted text to import media. This is where you insert your video files into the editor. Once the folder opens, select the videos you want to import and click “Open”.

Step 4

Drag your first clip to the timeline. Then, move the Playhead to where you want to start your transition.

Step 5

Take a snapshot of this frame.

Step 6

Split the footage and delete the part on the right side of the Playhead.

Step 7

Without moving the Playhead, simply drag the snapshot you took earlier. Right-click on the snapshot in the timeline and click on “Duration”. Then, set the duration to 1 second. Finally, click “OK”.

Step 8

Open your browser and go to the Picsart photo effects editor . Upload the same snapshot we made in Filmora and apply the “Comic” preset on it. Then, download the photo and import it back into Filmora.

Step 9

Drag the snapshot with the Comic preset to the Timeline and set its duration to 1 second as well.

Step 10

Repeat the same process with the second clip. Take a snapshot, add the Comic effect, and import it back into Filmora. But this time, align the clips as follows: Add the snapshot with the comic preset first, then the snapshot without any effects, and then the video. It should look like this.

Step 11

Go to the Transitions tab and drag the “Color Distance” transition between the first and second snapshot on your Timeline. Then, right-click on the transition box in the timeline and select “Edit Properties”. From there, change the duration of the transition to 1 second and click “OK”.

Step 12

Drag the “Push” transition between the next two snapshots. Set its duration to 1 second as well by right clicking the transition and going to “Edit Properties”.

Step 13

Place the last transition between the last two snapshots in your timeline. This time, we’re going to use the “Evaporate” transition. Set its duration to 1 second as well.

Step 14

The final step is to render the video. Click this button and you will finally be done.

Summary

What you’ve learned:

• How to add any type of transition to video clips and images in Filmora
• How to take quick snapshots of any frame in Filmora
• A quick way to Render videos and watch the final preview
• Add custom effects to images

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

First off, download the Filmora video editor . After it downloads, click install and follow the provided steps.

Step 2

After installing, the editor will start automatically. When it does, click on the “New Project” button to finally open the editor.

Step 3

From the upper-left side of the screen, click the highlighted text to import media. This is where you insert your video files into the editor. Once the folder opens, select the videos you want to import and click “Open”.

Step 4

Drag your first clip to the timeline. Then, move the Playhead to where you want to start your transition.

Step 5

Take a snapshot of this frame.

Step 6

Split the footage and delete the part on the right side of the Playhead.

Step 7

Without moving the Playhead, simply drag the snapshot you took earlier. Right-click on the snapshot in the timeline and click on “Duration”. Then, set the duration to 1 second. Finally, click “OK”.

Step 8

Open your browser and go to the Picsart photo effects editor . Upload the same snapshot we made in Filmora and apply the “Comic” preset on it. Then, download the photo and import it back into Filmora.

Step 9

Drag the snapshot with the Comic preset to the Timeline and set its duration to 1 second as well.

Step 10

Repeat the same process with the second clip. Take a snapshot, add the Comic effect, and import it back into Filmora. But this time, align the clips as follows: Add the snapshot with the comic preset first, then the snapshot without any effects, and then the video. It should look like this.

Step 11

Go to the Transitions tab and drag the “Color Distance” transition between the first and second snapshot on your Timeline. Then, right-click on the transition box in the timeline and select “Edit Properties”. From there, change the duration of the transition to 1 second and click “OK”.

Step 12

Drag the “Push” transition between the next two snapshots. Set its duration to 1 second as well by right clicking the transition and going to “Edit Properties”.

Step 13

Place the last transition between the last two snapshots in your timeline. This time, we’re going to use the “Evaporate” transition. Set its duration to 1 second as well.

Step 14

The final step is to render the video. Click this button and you will finally be done.

Summary

What you’ve learned:

• How to add any type of transition to video clips and images in Filmora
• How to take quick snapshots of any frame in Filmora
• A quick way to Render videos and watch the final preview
• Add custom effects to images

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

First off, download the Filmora video editor . After it downloads, click install and follow the provided steps.

Step 2

After installing, the editor will start automatically. When it does, click on the “New Project” button to finally open the editor.

Step 3

From the upper-left side of the screen, click the highlighted text to import media. This is where you insert your video files into the editor. Once the folder opens, select the videos you want to import and click “Open”.

Step 4

Drag your first clip to the timeline. Then, move the Playhead to where you want to start your transition.

Step 5

Take a snapshot of this frame.

Step 6

Split the footage and delete the part on the right side of the Playhead.

Step 7

Without moving the Playhead, simply drag the snapshot you took earlier. Right-click on the snapshot in the timeline and click on “Duration”. Then, set the duration to 1 second. Finally, click “OK”.

Step 8

Open your browser and go to the Picsart photo effects editor . Upload the same snapshot we made in Filmora and apply the “Comic” preset on it. Then, download the photo and import it back into Filmora.

Step 9

Drag the snapshot with the Comic preset to the Timeline and set its duration to 1 second as well.

Step 10

Repeat the same process with the second clip. Take a snapshot, add the Comic effect, and import it back into Filmora. But this time, align the clips as follows: Add the snapshot with the comic preset first, then the snapshot without any effects, and then the video. It should look like this.

Step 11

Go to the Transitions tab and drag the “Color Distance” transition between the first and second snapshot on your Timeline. Then, right-click on the transition box in the timeline and select “Edit Properties”. From there, change the duration of the transition to 1 second and click “OK”.

Step 12

Drag the “Push” transition between the next two snapshots. Set its duration to 1 second as well by right clicking the transition and going to “Edit Properties”.

Step 13

Place the last transition between the last two snapshots in your timeline. This time, we’re going to use the “Evaporate” transition. Set its duration to 1 second as well.

Step 14

The final step is to render the video. Click this button and you will finally be done.

Summary

What you’ve learned:

• How to add any type of transition to video clips and images in Filmora
• How to take quick snapshots of any frame in Filmora
• A quick way to Render videos and watch the final preview
• Add custom effects to images

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

First off, download the Filmora video editor . After it downloads, click install and follow the provided steps.

Step 2

After installing, the editor will start automatically. When it does, click on the “New Project” button to finally open the editor.

Step 3

From the upper-left side of the screen, click the highlighted text to import media. This is where you insert your video files into the editor. Once the folder opens, select the videos you want to import and click “Open”.

Step 4

Drag your first clip to the timeline. Then, move the Playhead to where you want to start your transition.

Step 5

Take a snapshot of this frame.

Step 6

Split the footage and delete the part on the right side of the Playhead.

Step 7

Without moving the Playhead, simply drag the snapshot you took earlier. Right-click on the snapshot in the timeline and click on “Duration”. Then, set the duration to 1 second. Finally, click “OK”.

Step 8

Open your browser and go to the Picsart photo effects editor . Upload the same snapshot we made in Filmora and apply the “Comic” preset on it. Then, download the photo and import it back into Filmora.

Step 9

Drag the snapshot with the Comic preset to the Timeline and set its duration to 1 second as well.

Step 10

Repeat the same process with the second clip. Take a snapshot, add the Comic effect, and import it back into Filmora. But this time, align the clips as follows: Add the snapshot with the comic preset first, then the snapshot without any effects, and then the video. It should look like this.

Step 11

Go to the Transitions tab and drag the “Color Distance” transition between the first and second snapshot on your Timeline. Then, right-click on the transition box in the timeline and select “Edit Properties”. From there, change the duration of the transition to 1 second and click “OK”.

Step 12

Drag the “Push” transition between the next two snapshots. Set its duration to 1 second as well by right clicking the transition and going to “Edit Properties”.

Step 13

Place the last transition between the last two snapshots in your timeline. This time, we’re going to use the “Evaporate” transition. Set its duration to 1 second as well.

Step 14

The final step is to render the video. Click this button and you will finally be done.

Summary

What you’ve learned:

• How to add any type of transition to video clips and images in Filmora
• How to take quick snapshots of any frame in Filmora
• A quick way to Render videos and watch the final preview
• Add custom effects to images

Free Download Free Download

Polish and Enshrine Your Music Videos with the Best Editing Software, Filmora. Add Cuts to Your Beat, Light Leaks, and Much More

A common understanding in cinematography circles is that editing makes the seventy percent of the total job. It is editing that makes a significant difference, and Filmora, a professional video editor, comes in handy when you want to edit your photos.

Filmora has multiple features that allow you to shine your videos in countless ways. This article will clarify everything you need to improve your music video. Also, it is just the tip of the iceberg. The more you try to be creative, the more options Filmora will provide you. The following points highlight how you can polish your music video editing skills.

Part 1. Duplicate your project before editing

Before you begin unleashing your inner creativity, you must make a duplicate copy of your project file. Of course, it would help if you did so to keep a backup file.

It will help you get back to the pre-edit file if you want to start from the beginning or if you want to save the file for use in the future. You can make a duplicate file of your project by following the subsequent steps.

Step1Download and install Filmora

You can download Filmora from its official website.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2Create or import your project

• Create a project if you are using Filmora for the first time.
• Import the project from your computer directory. Then, go to file in the menu bar, and click on the open project.

• Select the project you want to open.

Step3Duplicate the project file and rename it

• When you open Filmora, a start-up window will appear.
• Right-click on the project you want to duplicate.

Step4Rename the duplicate file

• Rename the file to keep a record of new editions.

The file is renamed. It will help you remember which file is original. If your files become corrupted, you can easily access the original ones. Once you are done duplicating your project file, it is time to do our primary job: Polishing our video edits with Filmora .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 2. Polishing Your Music Video

Just like ladies apply polish to their nails to make them more attractive, you can use editing to your music video to get the same result. Ladies can go to the beautician if they want. You can go to a professional editor if you like it.

However, these options are pretty expensive. The best way is to do it yourself. It is fun. Also, you can let loose your hidden artist for a while. Stick to the following points to understand how to begin polishing your music video.

How to put cuts on beats?

Adding beat cuts to a music video is imperative. Randomly placing beats yield an inferior-quality video. It also gives the impression that video editing is not done by a professional. The beats must be adjusted to synchronize with the storyline of the video.

Moreover, the video will lose its charm if you put cuts on every beat. People will not be able to enjoy, let alone understand, what is happening in the film.

What are the beats?

Beats are pieces of music that recur in a pattern. They are essential for music videos. It adds attraction for the viewers. Also, without beats, no music video can go viral. In the digital age, beats boost your music video.

Note: Cuts are recommended on every 2nd and 4th beat. In that way, a smooth transition of music beats takes place, making it more ear-pleasing. It also gives a professional outlook to the whole music.

Let’s learn how you can put cuts on your beats.

Step1Import the music video

• Import the Music video to which you would like to add any beat.
• You can also use the one given in Filmora.
• Drag and Drop the music video in the timeline panel.

Step2Detach its audio

• Right-click on the video.
• Select the option “Detach Audio.” It will separate the attached audio from the music. You will be able to add cuts where you deem necessary.

You can also import audio from your drive. After that, drag and drop the imported file into the timeline panel.

• Right, Click on the audio file in the audio panel.
• Select the option “Beat Detection.” It will show beats (with red markers) on the audio timeline, making adding cuts to the beat easy.

Step3Cut the beats where you find necessary

• Listen carefully to the audio file and plan where you want to add a cut to your beat.

• Adjust the beat according to your music video.
• Join the trimmed video segments to maintain continuity. The final product should look like the one given below.

Resultantly, it will readjust the beat to a different spot on the video. You can make multiple cuts in the beats. However, it is not recommended. It makes the whole experience of listening quite jarring.

Once you’ve added cuts to the beats, it is time to make them smooth. For that, keep reading the instructions given below.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to smooth out cuts

Adding cuts in the beats is one part of the job, not the whole job. After adding these cuts, you have to smoothen them. With it, the point of interest for the audience becomes clear.

To maintain the audience’s attention on our video, we have to smoothen the cuts so that our audience quickly understands the ongoing story in our video. If sudden changes occur on the screen, watching it gets disconcerting.

Indeed, you would not want your audience to have this experience. Head to the following techniques to understand how to smooth out video cuts

Technique 1: Showing multiple perspectives

The focal person in the video must occupy the same spot in the previous shot as it maintains in the current shot.

Let us understand from the example given below.

• Shot 1: The actress in the music video is occupying the left seat on the bus while looking outside.

• Shot 2: The actress occupies the same spot in the subsequent shot.

• Third Shot: The shot shows the wide angle of the bus from the inside. The actress is still sitting in the same position and the same place.

This technique keeps the audience focused on the point of interest while giving them a different perspective of the scene.

Technique 2: Using light leaks

The technique is quite helpful for the transition between two cuts. It uses different levels of colors to shine between cuts, adding smoothness and providing coherence.

What are light leaks?

Light leaks are great effects in Filmora. These effects fill the screen with light. It seems that light is leaking in a disorderly fashion. For the time being, the whole screen is filled with that effect. Thus, it explains the name of this effect as a light leak.

Filmora provides a plethora of features for adding Light Leak for transitioning cuts. With the use of Filmora, one can quickly bring a level of flow to the music video. Keep reading to understand how to use this remarkable feature of Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Access the light leak effects on Filmora

• Go to Effects on the Interface.
• Go to Overlay and choose the light Leak feature.
• You can also use any other light Leak stock in your capacity.

Step2Drag and drop the effects in the video editing

• Drag and drop the effect between any two cuts where you want to add this feature for a smooth transition.
• The effects should be placed above the video, in the timeline over the clip.

Step3Setting the color and blend of the light leak effect

• Right-click on the clip, and go to “Edit Properties.”

• Go to the Composing menu. Then, go to “Blend Mode” and choose “Screen.”
• It will adjust the light Leak feature to your entire screen.

Step4Fit the effect to the width of the screen

• Go to the Transform option in the clip properties.
• Click on both circles in front of the Scale option. It will adjust the effect to the entire frame width, giving it a pleasing outlook.

There you go! Your light Leak filter is ready. Give attention to how the light floods the screen and the scene transitions from one part to the next.

Now, you are done with adding some additional color and light to your cuts. Your cuts are now smooth and trouble-free. Moving onto our next tip that will further polish your music video. It is called Reframing and Zooming.

Reframe and zoom to polish your video

Another significant feature of Filmora is that it allows you to readjust the frame and zoom of the video. Any zooming option left undone in the shooting phase can be addressed in the editing phase.

For example, a director did an excellent job shooting a video. He considered every angle and yielded the best video shoot he could achieve. However, he missed a few zooming-out techniques while shooting. Now, what should one do? Use Filmora.

It is where the reframing and zooming feature of Filmora comes into play and saves the day.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

What are the reframing and zooming features?

This feature allows you to adjust the zoom on the point of interest in the music video. If you want to add extra focus on a certain point, the feature in Filmora can do that for you. You can run zoom in or zoom out on any particular object or actor. Follow the given steps to understand how you can do that.

Step1Plan your video

• Where you want to reframe and zoom. Trim that part of the video.

Step2Choose any two points on the clip for reframing

• Choose any two points on the clip. These points are reference points. When the clip moves from one point to the next point, the reframing takes place.

Step3Adjust the scale and position of the clip

• Go to the Transform option in Clip properties.
• Go to the clip’s end (2nd point), and turn on the Scale and Position circles.

• Go to the start of the clip
• And adjust the value of scale and position.

Atl Text: Setting new value to Scale and Position.

Step4Replay the clip

• Once the scale readings and position in the initial point are set, replay the clip to observe the reframing.

You can use it on the static shots if you want. The procedure is the same. You have to adjust the scale and position of the screen to adjust reframing. Thus, Filmora fills gaps in your music video without the need to reshoot.

Final words

Video editing requires patience, creativity, and efficient tools. Filmora provides the most effective means to run various effects on your video. You can add cuts to your, smoothen your cuts, and readjust the frame of your video. These are merely a few features to mention.

In a nutshell, Filmora assists you in polishing your music video. You will not need a professional editor. You will become one in no time.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Step2Create or import your project

• Create a project if you are using Filmora for the first time.
• Import the project from your computer directory. Then, go to file in the menu bar, and click on the open project.

• Select the project you want to open.

Step3Duplicate the project file and rename it

• When you open Filmora, a start-up window will appear.
• Right-click on the project you want to duplicate.

Step4Rename the duplicate file

• Rename the file to keep a record of new editions.

The file is renamed. It will help you remember which file is original. If your files become corrupted, you can easily access the original ones. Once you are done duplicating your project file, it is time to do our primary job: Polishing our video edits with Filmora .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 2. Polishing Your Music Video

Just like ladies apply polish to their nails to make them more attractive, you can use editing to your music video to get the same result. Ladies can go to the beautician if they want. You can go to a professional editor if you like it.

However, these options are pretty expensive. The best way is to do it yourself. It is fun. Also, you can let loose your hidden artist for a while. Stick to the following points to understand how to begin polishing your music video.

How to put cuts on beats?

Adding beat cuts to a music video is imperative. Randomly placing beats yield an inferior-quality video. It also gives the impression that video editing is not done by a professional. The beats must be adjusted to synchronize with the storyline of the video.

Moreover, the video will lose its charm if you put cuts on every beat. People will not be able to enjoy, let alone understand, what is happening in the film.

What are the beats?

Beats are pieces of music that recur in a pattern. They are essential for music videos. It adds attraction for the viewers. Also, without beats, no music video can go viral. In the digital age, beats boost your music video.

Note: Cuts are recommended on every 2nd and 4th beat. In that way, a smooth transition of music beats takes place, making it more ear-pleasing. It also gives a professional outlook to the whole music.

Let’s learn how you can put cuts on your beats.

Step1Import the music video

• Import the Music video to which you would like to add any beat.
• You can also use the one given in Filmora.
• Drag and Drop the music video in the timeline panel.

Step2Detach its audio

• Right-click on the video.
• Select the option “Detach Audio.” It will separate the attached audio from the music. You will be able to add cuts where you deem necessary.

You can also import audio from your drive. After that, drag and drop the imported file into the timeline panel.

• Right, Click on the audio file in the audio panel.
• Select the option “Beat Detection.” It will show beats (with red markers) on the audio timeline, making adding cuts to the beat easy.

Step3Cut the beats where you find necessary

• Listen carefully to the audio file and plan where you want to add a cut to your beat.

• Adjust the beat according to your music video.
• Join the trimmed video segments to maintain continuity. The final product should look like the one given below.

Resultantly, it will readjust the beat to a different spot on the video. You can make multiple cuts in the beats. However, it is not recommended. It makes the whole experience of listening quite jarring.

Once you’ve added cuts to the beats, it is time to make them smooth. For that, keep reading the instructions given below.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to smooth out cuts

Adding cuts in the beats is one part of the job, not the whole job. After adding these cuts, you have to smoothen them. With it, the point of interest for the audience becomes clear.

To maintain the audience’s attention on our video, we have to smoothen the cuts so that our audience quickly understands the ongoing story in our video. If sudden changes occur on the screen, watching it gets disconcerting.

Indeed, you would not want your audience to have this experience. Head to the following techniques to understand how to smooth out video cuts

Technique 1: Showing multiple perspectives

The focal person in the video must occupy the same spot in the previous shot as it maintains in the current shot.

Let us understand from the example given below.

• Shot 1: The actress in the music video is occupying the left seat on the bus while looking outside.

• Shot 2: The actress occupies the same spot in the subsequent shot.

• Third Shot: The shot shows the wide angle of the bus from the inside. The actress is still sitting in the same position and the same place.

This technique keeps the audience focused on the point of interest while giving them a different perspective of the scene.

Technique 2: Using light leaks

The technique is quite helpful for the transition between two cuts. It uses different levels of colors to shine between cuts, adding smoothness and providing coherence.

What are light leaks?

Light leaks are great effects in Filmora. These effects fill the screen with light. It seems that light is leaking in a disorderly fashion. For the time being, the whole screen is filled with that effect. Thus, it explains the name of this effect as a light leak.

Filmora provides a plethora of features for adding Light Leak for transitioning cuts. With the use of Filmora, one can quickly bring a level of flow to the music video. Keep reading to understand how to use this remarkable feature of Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Access the light leak effects on Filmora

• Go to Effects on the Interface.
• Go to Overlay and choose the light Leak feature.
• You can also use any other light Leak stock in your capacity.

Step2Drag and drop the effects in the video editing

• Drag and drop the effect between any two cuts where you want to add this feature for a smooth transition.
• The effects should be placed above the video, in the timeline over the clip.

Step3Setting the color and blend of the light leak effect

• Right-click on the clip, and go to “Edit Properties.”

• Go to the Composing menu. Then, go to “Blend Mode” and choose “Screen.”
• It will adjust the light Leak feature to your entire screen.

Step4Fit the effect to the width of the screen

• Go to the Transform option in the clip properties.
• Click on both circles in front of the Scale option. It will adjust the effect to the entire frame width, giving it a pleasing outlook.

There you go! Your light Leak filter is ready. Give attention to how the light floods the screen and the scene transitions from one part to the next.

Now, you are done with adding some additional color and light to your cuts. Your cuts are now smooth and trouble-free. Moving onto our next tip that will further polish your music video. It is called Reframing and Zooming.

Reframe and zoom to polish your video

Another significant feature of Filmora is that it allows you to readjust the frame and zoom of the video. Any zooming option left undone in the shooting phase can be addressed in the editing phase.

For example, a director did an excellent job shooting a video. He considered every angle and yielded the best video shoot he could achieve. However, he missed a few zooming-out techniques while shooting. Now, what should one do? Use Filmora.

It is where the reframing and zooming feature of Filmora comes into play and saves the day.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

What are the reframing and zooming features?

This feature allows you to adjust the zoom on the point of interest in the music video. If you want to add extra focus on a certain point, the feature in Filmora can do that for you. You can run zoom in or zoom out on any particular object or actor. Follow the given steps to understand how you can do that.

Step1Plan your video

• Where you want to reframe and zoom. Trim that part of the video.

Step2Choose any two points on the clip for reframing

• Choose any two points on the clip. These points are reference points. When the clip moves from one point to the next point, the reframing takes place.

Step3Adjust the scale and position of the clip

• Go to the Transform option in Clip properties.
• Go to the clip’s end (2nd point), and turn on the Scale and Position circles.

• Go to the start of the clip
• And adjust the value of scale and position.

Atl Text: Setting new value to Scale and Position.

Step4Replay the clip

• Once the scale readings and position in the initial point are set, replay the clip to observe the reframing.

You can use it on the static shots if you want. The procedure is the same. You have to adjust the scale and position of the screen to adjust reframing. Thus, Filmora fills gaps in your music video without the need to reshoot.

Final words

Video editing requires patience, creativity, and efficient tools. Filmora provides the most effective means to run various effects on your video. You can add cuts to your, smoothen your cuts, and readjust the frame of your video. These are merely a few features to mention.

In a nutshell, Filmora assists you in polishing your music video. You will not need a professional editor. You will become one in no time.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Zoom Video in VLC Media Player

Even though VLC Media Player is not the default video player in any operating system, most users install VLC Player separately on their computers. This is because VLC Media Player offers several useful and advanced features that the default media player like Windows Media Player lacks. There are situations when users need to zoom into certain parts of a video, and that is where VLC zoom in video feature comes in handy.

You may need to zoom into videos to pay attention to details and focus on parts around the subject that others are missing out. For example, you have recorded a video, and you have played it on VLC to zoom in and ensure that there is nothing distracting before you publish the video. Now, we will illustrate all the different ways on how to zoom in VLC Media Player. We will also suggest a better alternative to zoom into videos easily.

Part 1: Zoom VLC Video Using Interactive Zoom

VLC Media Player comes with Interactive Zoom feature that lets you zoom into a section of a video irrespective of its resolution. You can use Interactive Zoom feature to zoom nearly eight times the original size of the video. While you zoom your video with Interactive Zoom option, VLC Media Player zooms the video digitally, and if the video resolution is not high, you can see some deterioration in video quality as you zoom in. Here are the steps on how to VLC zoom with Interactive Zoom.

Step1First, you have to enable Interactive Zoom feature. Launch VLC Player and go to Tools menu option.

Step2Select Effects and Filters and you will see Adjustments and Effects window open.

Step3Go to Video Effects tab and then go to Geometry tab.

Step4Turn on Interactive Zoom option. Click on Save and Close buttons.

Step5Play a video and you will see a Picture in Picture window in the top-left corner where you can see live preview of the video. You will notice a rectangular box that you can drag around the PiP window to zoom that section of the video.

Step6Wherever you place the rectangular box in PiP window, that part will be zoomed and shown outside the PiP window. You can increase or decrease the level of magnification from the vertical slider present below PiP window.

Part 2: Zoom Video Using VLC Video Menu

Apart from Interactive Zoom, there is also an inbuilt Zoom option available under Video Menu. While Interactive Zoom is for detailed zooming, Zoom through Video menu on VLC is for instant zooming. Moreover, Zoom through Video menu is effective only when you view the video on VLC Player. If you are watching the video on full screen, the zooming effect will not be easily noticeable. Here are the steps on how to zoom in VLC player using VLC Video menu.

Step1Open VLC Media player in windowed mode and play the desired video.

Step2Go to Video menu and select Zoom option.

Step3You will come across several options such as 1:4 quarter, 1:2 half, 1:1 original, and 2:1 double. You can select from one of them as per your requirements.

Otherwise, you can press Shift + Z keys together to try out different zoom options.

Part 3: Zoom VLC Video Using Magnifier

If you are using VLC Media Player on your Windows desktop computer, you can use the inbuilt Magnifier tool to zoom into a video that you are playing on VLC. You can zoom into videos to read any text in the background but this leads to low resolution and distortion. You can zoom in by 16 times which is the highest among all the three methods. Here are the steps on how to VLC zoom video using Magnifier tool.

Step1Open VLC Player and play the desired video.

Step2Go to Start menu on Windows and search for “Magnifier”.

Step3Click on Magnifier App. Once it opens, place the mouse pointer on the video and you will see its magnified version.

Step4Press Windows and “+” keys to zoom in while press Windows and “-“ keys to zoom out.

Part 4: VLC Alternative to Zoom in Videos

If you are not satisfied with VLC Player zoom feature, you can use a video editor to zoom into your video conveniently so that you can check any focused section on your video. You can also read any text on the video comfortably. We recommend Wondershare Filmora as an alternative to VLC Media Player for zooming into videos. Filmora is a professional video editor and here is the list of the steps on how to zoom into videos with Filmora.

Step 1: Download and install Wondershare Filmora and it is available for Windows and Mac users.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 2: Launch Wondershare and click on New Project option.

Step 3: Import your video on Filmora into Project Media folder by drag and drop option.

Step 4: Drag and drop the video file into Timeline. Click on Crop icon on the top bar of Timeline.

Step 5: Go to Pan & Zoom tab and move the rectangular box and play the video to watch its magnified video. You can also export the video after cropping in your desired file format.

Conclusion

There are several scenarios when you need to zoom into a video to focus on the details. VLC Media Player comes with instant zoom as well as detailed zoom options to satisfy your requirements. You can even use Magnifier App on Windows to zoom into videos. But for the best result, we recommend Wondershare Filmora as the best VLC Player alternative for zooming videos.

Free Download For macOS 10.14 or later

Step 2: Launch Wondershare and click on New Project option.

Step 3: Import your video on Filmora into Project Media folder by drag and drop option.

Step 4: Drag and drop the video file into Timeline. Click on Crop icon on the top bar of Timeline.

Step 5: Go to Pan & Zoom tab and move the rectangular box and play the video to watch its magnified video. You can also export the video after cropping in your desired file format.

Conclusion

There are several scenarios when you need to zoom into a video to focus on the details. VLC Media Player comes with instant zoom as well as detailed zoom options to satisfy your requirements. You can even use Magnifier App on Windows to zoom into videos. But for the best result, we recommend Wondershare Filmora as the best VLC Player alternative for zooming videos.

Also read: