Ultimate Guide on How to Film Better in Public

Filming in public and different locations can add a new dimension to any video. The possibilities are limitless, from the hustle and bustle of a busy city street to the tranquil beauty of a remote beach.

Suppose you’re a new vlogger and want to capture the perfect scene in public. Then this blog is for you. It will explain various tips and tricks to help you create the best videos, regardless of location. So let’s start and learn more about how to film better in public!

Part 1. What Gear Will You Need to Record a Better Video in Public?

While recording in public, you want to avoid setting and holding unnecessary camera gear. That’s why you should keep your gear as low-key as possible. The essential shooting gears that you are going to need are as follows:

A Good Camera

A good camera is essential to record a video in public because it will provide quality footage. It will also allow you to capture more detail and create more engaging videos. But if you use a phone instead, make sure it is the latest iPhone or other with high pixels camera.

A Tripod

A tripod is essential when recording video in public to ensure that your shots are stable and steady. Without a tripod, your camera can shake and create a distorted, blurry image that can ruin a shot. So having a secure tripod will help you capture professional-looking footage.

A Microphone

A microphone is essential for recording a video in public because it captures the sound in the environment, allowing the video to be recorded with better-quality audio. Without a microphone, the video would be recorded with distorted sound and would likely be challenging to understand.

Apart from the gear mentioned above, you can also bring an ND filter, extra batteries, and SD cards. Because If the battery runs out or the SD card becomes full, the video recording could be lost. The spare batteries and SD cards help to ensure that the video can be captured uninterrupted. Let’s see what we need further.

Part 2. What Do You Need to Accomplish With Your Video?

While recording a video in a busy location, you need to accomplish three things with your video to record it better. Which are as follows:

1. Clean Shots

When recording in a busy location, it is essential to try and capture clean shots. It can be done by using a wide-angle lens to get the full shot or zooming in to focus on a particular element.

2. Clean Audio

Getting a clean and clear sound when recording audio in a busy location is essential. A good quality microphone, an audio recorder, or external noise reduction can help minimize background noise and capture the desired audio.

3. Decent Lighting

In a busy location, decent lighting is as important as the other two factors. Look for natural light sources that can provide good light, even illumination. If these are unavailable, consider using portable lighting equipment or lamps to create a more flattering environment.

Now that we know what we need let’s see how to make a video.

Part 3. How to Get the Best Shot While Filming Outdoor?

Whether you are a vlogger, a YouTuber, or a student filmmaker, shooting a video in a busy area is always a challenge. You must be able to plan and execute your production in a way that minimizes disruption and produces quality footage. By following these instructions, we hope you can make a difference in a shot you record:

Step1 Scout the Location

Before recording, visit the location in advance to plan your shots. Take note of potential distractions or noise sources and plan your angles accordingly.

Step2 Choose the correct shooting time

The best time to record a video in a busy location is when the area is less crowded, such as early in the morning or late at night. Avoiding peak times and holidays is also a good idea.

Step3 Choose the right angle

Once you get to the location, you must find the right angle.

Select Background

Try to find a background that will best capture the atmosphere of the area and minimize any background noise.

Set the frame

If your frame is too broad, you will face potential distractions that could interfere with your video, such as people walking in and out of the frame.

Set your position

Instead of getting closer to your talent, get further away and zoom in this way, you leave space for other people in the location, and you can still get your shot!

Try to get your shot and then get out quickly so you don’t bother other people trying to get their photos.

Part 4. Best Way to Record Audio While Filming Outdoor

Audio is essential to any video production, and recording audio while filming outdoor scenes can be challenging.

Outdoor environments come with more variables to consider, such as wind, traffic noise, and other background noise, that can make capturing clear audio more difficult. Even if you use a high-quality mic, you still have chances of interruption.

If you get any such variable in the video you recorded, you can re-record the audio with the help of Wondershare Filmora . Let’s see how you can do it:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 First, select the clip you want to re-record and then drag it onto the timeline.

Step2 Right-click on the video you dragged and then click on the Detach Audio. After doing that, mute the lousy audio from the audio timeline.

Step3 Place the playhead at the clip’s start, click Record just above the import media section, and then click Record Voiceover.

Step4 Now select a recording device and then select the time for the countdown. For example, a 3-minute timer would be perfect.

Step5 Click record and try to re-record your line and match it up the best you can. To get the sound and sync right, you might need to attempt a few times, but in the end, it will improve the quality of your video.

This technique is used in almost every film you see, especially action sequences that also have dialogue. You can also use this technique with the help of Filmora and enhance your video with better audio quality.

Conclusion

We hope this blog has given you some tips for how to film better in public. Filming in public can be intimidating, but you can shoot professional footage with the proper techniques.

From understanding the legalities of filming in public to learning to be discreet and respectful of your environment, you can ensure your filming experience is positive and successful.

With these tips and some practice, you’ll be on your way to shooting great videos in public!

Let us know your favorite film location in the comments below.

Free Download For macOS 10.14 or later

Step1 First, select the clip you want to re-record and then drag it onto the timeline.

Step2 Right-click on the video you dragged and then click on the Detach Audio. After doing that, mute the lousy audio from the audio timeline.

Step3 Place the playhead at the clip’s start, click Record just above the import media section, and then click Record Voiceover.

Step4 Now select a recording device and then select the time for the countdown. For example, a 3-minute timer would be perfect.

Step5 Click record and try to re-record your line and match it up the best you can. To get the sound and sync right, you might need to attempt a few times, but in the end, it will improve the quality of your video.

This technique is used in almost every film you see, especially action sequences that also have dialogue. You can also use this technique with the help of Filmora and enhance your video with better audio quality.

Conclusion

We hope this blog has given you some tips for how to film better in public. Filming in public can be intimidating, but you can shoot professional footage with the proper techniques.

From understanding the legalities of filming in public to learning to be discreet and respectful of your environment, you can ensure your filming experience is positive and successful.

With these tips and some practice, you’ll be on your way to shooting great videos in public!

Let us know your favorite film location in the comments below.

Best Video Editing Courses Online with Certificate

The best way to learn video editing is from people who are experts in the field. Plus, getting a certification is a nice bonus that can more easily land you a great job when you’re done. With that said, we’re offering a comprehensive list of the best video editing courses with certification — ones you’ll be glad to complete.

Read below to find out all about these courses. What they teach, who they are from, and how they will benefit you.

List of the Best Online Video Editing Courses With Certification

You’re about to see a list of video editing courses categorized into four groups. Each caters to specific needs that will help you make a better decision.

Courses With Certification for Popular Video Editor Platforms

Course Name	Vendor
Premiere Pro CC for Beginners: Video Editing in Premiere	Udemy
Video Editing in DaVinci Resolve 18/17	Udemy
DaVinci Resolve Fundamentals	LinkedIn Learning
PowerDirector 15 – Video Editing for PC Users	Udemy
Mastering Final Cut Pro	Coursera
Learning Final Cut Pro X – Video Editing Mastery	Udemy

Video Editing Tutorials - Mastering The Basics

Course Name	Vendor
Video Production Essentials	Fiverr Learn
Free Video Editing Courses and Tutorials	Udemy
Introduction to Video Editing	LinkedIn
Video editing fundamentals	LinkedIn
Online Video Editing Classes	Skillshare
The Complete Video Production Bootcamp	Udemy

Video Editing Courses With Certification For Mobile Users

Course Name	Vendor
Smartphone Video For Beginners – iPhone Video Editing Course	Udemy

Cinematic Level Video Editing Courses

Course Name	Vendor
VIDEO EDITING. Techniques loved by pro broadcast filmmakers	Udemy
The History of Film and Video Editing	LinkedIn

What You Will Learn From Each Course

Each video editing course online with certification offers something unique. Below, you can see a detailed comparison between all of them. As a result, you’ll know exactly which course to choose and which video editing tool to start with.

1. Courses With Certification for Popular Video Editor Platforms

First, let’s break down all the courses in this group. You’ll learn about its ratings, duration, contents, and more.

Premiere Pro CC for Beginners: Video Editing in Premiere

Initially, this course dives into the basics of video editing. Then, you get into more advanced topics that will help you distinguish yourself from the complete beginners.

• Vendor: Udemy
• Cost: $19.99
• Duration: 24.5 hours
• Rating: 4.7 / 5
• Level: Beginner-Advanced

Key topics inside this course:

• How to export your videos for High-Definition Playback and 4K
• Video color correction
• How to apply visual effects
• Design clean and modern titles for any video
• The editing process of a video from beginning to end
• Load the perfect settings at the start of each project
• Color grading
• Edit green screen footage
• How to add motion to titles, photos, and videos

At the end of the course, you’ll have the skills necessary to edit an entire video from start to finish. Additionally, you’ll know your way around Adobe Premiere Pro. Most of the topics taught inside will be enough to help you land a video editing job or edit your videos professionally.

Video Editing in DaVinci Resolve 18/17

With this video editing course, you will master editing in DaVinci Resolve. It includes beginner lessons, as well as a few advanced editing techniques. Over 30.000 students have currently completed it.

• Vendor: Udemy
• Cost: $84.99
• Duration: 11.5 hours
• Rating: 4.6 / 5
• Level: Beginner-Advanced

Key topics inside this course:

• How to add effects to videos in DaVinci Resolve
• Color Grading with multiple tools
• Master different types of Nodes
• Complete tests doing various projects
• Cut page quick and easy video editing
• Adding motion graphics
• Effective color-correcting methods
• Using Color Wheels, Power windows, Scopes, Curves, Qualifiers, and more

This course aims to teach you how to use DaVinci Resolve. After you’ve mastered the platform, the mentor shows you various tips and tricks to edit videos more professionally using this tool.

PowerDirector 15 - Video Editing for PC Users

Power Director 15 is a great app to learn video editing if you’re a Windows user. This course covers everything necessary for you to know your way around this program quickly.

• Vendor: Udemy
• Cost: $13.99
• Duration: 4h
• Rating: 4.5 / 5
• Level: Beginner

Key topics inside this course:

• How to export high-quality videos for any device or platform
• How to use every feature in Power Director, including the newest ones
• Add professional titles and animated graphics to any video
• Master using blend modes, masks, and the action camera center

The knowledge in this video editing course online with certification will allow you to edit videos the way you envision. You will have the ability to create anything you want, and deliver exceptional results.

Mastering Final Cut Pro

Mastering Final Cut Pro is an online video editing course with certification that grants you the knowledge to use this tool. In addition, you and over 30.000 other students get to learn from Apple Certified trainers.

• Vendor: Coursera
• Cost: $49
• Duration: 40h
• Rating: 4.5 / 5
• Level: Beginner

Key topics inside this course:

• The best ways to import and export project files with Final Cut Pro
• How to apply effects and modern transitions
• Creating a project and editing a video from start to finish
• Change the timing of clips

This is the perfect course if you’ve never used Final Cut Pro. It’s beginner-friendly and takes you through every step of using the platform, from creating a project to editing it and finally exporting a high-quality video.

Learning Final Cut Pro X – Video Editing Mastery

This is a video editing course for anyone using Mavericks OS. It’s designed to take full advantage of this Operating System alongside the Final Cut Pro X platform.

• Vendor: Udemy
• Cost: $14.99
• Duration: 6h 30min
• Rating: 4.7 / 5
• Level: Beginner

Key topics inside this course:

• Mastering the user interface and choosing your preferences
• Learning helpful shortcuts to speed up your workflow
• Best and quickest methods to import media
• How to organize your clips
• Using the timeline
• Working with effects, keyframes, compounds clips, and audio clips
• How to use generators and white screens
• The best export settings and other tips

If you’ve ever wanted to master Final Cut Pro X, there’s no better place to go. This course is designed to start on a beginner-friendly level. But, it moves to more advanced lessons later down the line.

2. Video Editing Tutorials - Mastering The Basics

The following video editing courses include lessons mainly on the basics of video editing. They won’t focus on any specific platform or tool. Instead, you’ll be learning the most important principles of creating a high-quality and modern video.

Video Production Essentials

A fairly simple course designed to teach you the process of creating and editing a video from scratch. This is one of the best video editing courses online, featuring several professional mentors.

• Vendor: Fiverr Learn
• Cost: $24
• Duration: 6h 38min
• Rating: 4.8 / 5
• Level: Beginner to Intermediate

Key topics inside this course:

• What equipment to use for professional video editing
• How to shoot high-quality video with your smartphone
• Professional video and audio recording techniques
• Exporting settings for high-quality online viewing
• Fundamentals of using a DSLR or Mirrorless camera
• Create high-converting CTAs for your videos

The course will help you understand crucial facts about many different types of videos that are in demand today. You’ll learn how to use and navigate video editing tools to create anything you can imagine. The mentors even offer a few tips for growing your own Youtube channel.

Free Video Editing Courses and Tutorials

This pick is slightly different. Here, you can see a list of a few of the best video editing courses that are completely free. They are still taught by experts and offer plenty of useful knowledge, especially for beginners.

• Vendor: Udemy
• Cost: Free
• Duration: Unknown
• Rating: Varies
• Level: Beginner to Intermediate

Key topics inside this course:

• Beginner lessons on editing all types of videos
• How to record professional video content
• Beginner lessons for many different video editing platforms
• 3D Video Composition
• Understand how to use Premiere Pro
• Video editing on your smartphone
• Camtasia 9 Mastery Course
• How to create social media marketing videos

This is a list of many different video editing courses that are free on Udemy. Millions of members have enrolled and are learning for free. Best of all, it’s a great way to dive into video editing for free. Then, you can choose some of the paid ones for more advanced lessons.

Introduction to Video Editing

This course gives you a LinkedIn Learning Certificate and the knowledge to edit your first-ever video. There are 6 different lesson categories that you will enjoy going through. Each one focuses on another skill or principle.

• Vendor: LinkedIn Learning
• Cost: $34.99
• Duration: 2h 53min
• Rating: 4.7 / 5
• Level: Beginner

Key topics inside this course:

• The importance of storytelling in video editing
• Structures and transitions
• Timing and pacing
• Shot composition
• Comparing different editing applications
• Track-based editing vs. storyline-based editing
• Organizing your files
• How to edit a short documentary
• Audio editing lessons
• Post-production processes

This course offers a video editing certification that proves you’re well accustomed to the basic principles of this skill. You will know your way around different editing platforms. You will learn how to edit modern videos. And you will know exactly where to focus your efforts for improving yourself and your skills next.

Video Editing Fundamentals

This course features essential video editing foundations in one exciting program. It’s a short course designed to introduce you to video editing. To be more precise, you will mainly learn about the post-production process of video editing.

• Vendor: LinkedIn Learning
• Cost: LinkedIn Learning Membership Only ($39.99)
• Duration: 37min
• Rating: 4.7 / 5
• Level: Beginner

Key topics inside this course:

• Trimming or fine-tuning the product
• Audio editing process
• How to add images to your videos
• Video effects tutorials
• Color correction
• How to use text to your advantage
• Export and delivery settings

This certificate will prove that you know what it takes to edit a video professionally. It tells us that you are familiar with all the different parts that come together to create a video worth watching.

Online Video Editing Classes

This is a list of video editing courses by some of the most popular video editors on the planet. You’ll learn from huge names such as Marques Brownies, Nathaniel Drew, Jordy Vandeput, and many more. So, pick your favorite, and start learning.

• Vendor: Skillshare
• Cost: Depends
• Duration: 37min
• Rating: Varies
• Level: From Beginner to Pro

Key topics inside this course:

• How to create mind-blowing Youtube videos
• Adobe Premiere Pro for Beginners
• How to document your life
• Final Cut Pro X - Beginner to Youtuber
• Introduction to Filmmaking
• Mastering TikTok videos
• iPhone Filmmaking
• Advanced training for all video editing apps

There are courses for all skill levels here. You can start as a complete beginner and finish as a master who knows how to create a worthwhile video. Or, you can choose one that improves your current skills.

The Complete Video Production Bootcamp

A nine-hour course on everything video editing related. To be more precise, you will dive into video production tutorials, cinematography, editing & distribution, and more. Companies like Nasdaq, Box, NetApp, and more offer this course to their employees.

• Vendor: Udemy
• Cost: $19.99
• Duration: 9h
• Rating: 4.5 / 5
• Level: Beginner

Key topics inside this course:

• Video storytelling
• How to record better audio
• Tips for posting videos online
• Discover the best equipment to use
• How to set up the perfect lighting
• How to get more engagement on your videos
• Create professional videos with any equipment

Over 160.000 students have benefited from the contents of this course. It dives into both beginner and advanced video editing lessons. So even if you don’t have any experience in this, you will still easily understand everything taught inside.

3. Video Editing Courses With Certification For Mobile Users

The courses you will see in this list are exclusively for mobile users. You can still make great videos on your mobile device if you don’t have a computer. All of the knowledge you need for this is below.

Smartphone Video For Beginners – iPhone Video Editing Course

Dive into five hours of content teaching you how to create unbelievable videos on your phone. You’ll be surprised by how it’s possible to create such professional videos on a smartphone.

• Vendor: Udemy
• Cost: $99.99
• Duration: 5h
• Rating: 4.3 / 5
• Level: Beginner

Key topics inside this course:

• Must-have gear for editing on a smartphone (Affordable options)
• How to set up your phone’s camera for optimal results
• Must-have free apps for professional smartphone video editing
• Using gimbals, action cams, and drones with your phone
• Video storytelling on a smartphone
• Phone resolutions, frame rates, ProRes, color space, and more
• How to make Cinematic shots, hit the right angles, and similar

This outstanding course will give you a certification proving you’re one of the rare video editors who can create wonders from their phones. From now on, you can’t use the excuse that you don’t have an excellent PC to create amazing videos.

4. Cinematic Level Video Editing Courses

The final category will introduce you to video editing courses online with certification for cinematic-level skills. Completing these courses will prove you are a master video editor who knows no bounds.

VIDEO EDITING. Techniques loved by pro broadcast filmmakers

Your teacher for this course will be Andrew St.Pierre White, an award-winning video editing veteran. He will teach you tips and tricks used by professionals to this day. Timeless advice that will take your career to the next level.

• Vendor: Udemy
• Cost: $84.99
• Duration: 3h 30min
• Rating: 4.5 / 5
• Level: Advanced to Pro

Key topics inside this course:

• How to entertain and inspire any audience
• Understand the balance between good editing and good content
• Amazing techniques used in TV production
• Turn great editing into great results
• Turn amateur videos into professional productions
• Most common mistakes filmmakers make

Once you know the basics of video editing, this course will take your skills to the next level. You will learn how the big players make professional videos that capture massive audiences. Plus, your mentor will show you how to work with big names in this industry.

The History of Film and Video Editing

Never underestimate how much history can teach you. Completing this course will teach you more about video editing than many pro filmmakers. Find out how video editing has progressed through the last century.

• Vendor: LinkedIn Learning
• Cost: $34.99
• Duration: 2h 10min
• Rating: 4.8 / 5
• Level: Everyone

Key topics inside this course:

• Early days of photography and film
• Continuity editing and montage theory
• When sound was born
• Establishing the standards for editing
• Evolution of editing techniques
• Technology
• The rise of the digital era

By learning the history of video editing, you will be more aware. You will realize what people love to see and detect patterns. These patterns will guide you toward becoming a professional video editor.

Make Your Video Editing Journey Easier

Now that we’re done with learning, it’s time to start doing. You already have enough fantastic courses to learn everything necessary to edit videos professionally. But now, how do you use your skills and achieve the easiest and quickest results?

Your best option is to use the Filmora video editor.

What Is Filmora and Filmora?

It’s as powerful as Adobe Premiere Pro but more straightforward to navigate. In addition, Filmora lets you command an arsenal of unique tools necessary for creating modern videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Anyone on both Windows and Mac can use Filmora. In addition, if you’re a mobile user, you can download Filmora and enjoy the same benefits.

Aside from its easy-to-use interface, Filmora is packed with editing resources that will never leave you wondering how or what to do next. Of course, you can watch the free Youtube tutorials to master the platform entirely.

For example, we have prepared you with a video tutorial below to start your video editing journey with no delay!

Lastly, you can easily export in any format necessary for your project. It doesn’t get easier than this.

Conclusion

The video editing certification online courses you see here are more than enough to prepare you. You will learn everything it takes to edit any video. Use this information wisely and take advantage of this beautiful opportunity to become one of the best video editors.

Video Editing Tutorials - Mastering The Basics

Course Name	Vendor
Video Production Essentials	Fiverr Learn
Free Video Editing Courses and Tutorials	Udemy
Introduction to Video Editing	LinkedIn
Video editing fundamentals	LinkedIn
Online Video Editing Classes	Skillshare
The Complete Video Production Bootcamp	Udemy

Video Editing Courses With Certification For Mobile Users

Course Name	Vendor
Smartphone Video For Beginners – iPhone Video Editing Course	Udemy

Cinematic Level Video Editing Courses

Course Name	Vendor
VIDEO EDITING. Techniques loved by pro broadcast filmmakers	Udemy
The History of Film and Video Editing	LinkedIn

What You Will Learn From Each Course

Each video editing course online with certification offers something unique. Below, you can see a detailed comparison between all of them. As a result, you’ll know exactly which course to choose and which video editing tool to start with.

1. Courses With Certification for Popular Video Editor Platforms

First, let’s break down all the courses in this group. You’ll learn about its ratings, duration, contents, and more.

Premiere Pro CC for Beginners: Video Editing in Premiere

Initially, this course dives into the basics of video editing. Then, you get into more advanced topics that will help you distinguish yourself from the complete beginners.

• Vendor: Udemy
• Cost: $19.99
• Duration: 24.5 hours
• Rating: 4.7 / 5
• Level: Beginner-Advanced

Key topics inside this course:

• How to export your videos for High-Definition Playback and 4K
• Video color correction
• How to apply visual effects
• Design clean and modern titles for any video
• The editing process of a video from beginning to end
• Load the perfect settings at the start of each project
• Color grading
• Edit green screen footage
• How to add motion to titles, photos, and videos

At the end of the course, you’ll have the skills necessary to edit an entire video from start to finish. Additionally, you’ll know your way around Adobe Premiere Pro. Most of the topics taught inside will be enough to help you land a video editing job or edit your videos professionally.

Video Editing in DaVinci Resolve 18/17

With this video editing course, you will master editing in DaVinci Resolve. It includes beginner lessons, as well as a few advanced editing techniques. Over 30.000 students have currently completed it.

• Vendor: Udemy
• Cost: $84.99
• Duration: 11.5 hours
• Rating: 4.6 / 5
• Level: Beginner-Advanced

Key topics inside this course:

• How to add effects to videos in DaVinci Resolve
• Color Grading with multiple tools
• Master different types of Nodes
• Complete tests doing various projects
• Cut page quick and easy video editing
• Adding motion graphics
• Effective color-correcting methods
• Using Color Wheels, Power windows, Scopes, Curves, Qualifiers, and more

This course aims to teach you how to use DaVinci Resolve. After you’ve mastered the platform, the mentor shows you various tips and tricks to edit videos more professionally using this tool.

PowerDirector 15 - Video Editing for PC Users

Power Director 15 is a great app to learn video editing if you’re a Windows user. This course covers everything necessary for you to know your way around this program quickly.

• Vendor: Udemy
• Cost: $13.99
• Duration: 4h
• Rating: 4.5 / 5
• Level: Beginner

Key topics inside this course:

• How to export high-quality videos for any device or platform
• How to use every feature in Power Director, including the newest ones
• Add professional titles and animated graphics to any video
• Master using blend modes, masks, and the action camera center

The knowledge in this video editing course online with certification will allow you to edit videos the way you envision. You will have the ability to create anything you want, and deliver exceptional results.

Mastering Final Cut Pro

Mastering Final Cut Pro is an online video editing course with certification that grants you the knowledge to use this tool. In addition, you and over 30.000 other students get to learn from Apple Certified trainers.

• Vendor: Coursera
• Cost: $49
• Duration: 40h
• Rating: 4.5 / 5
• Level: Beginner

Key topics inside this course:

• The best ways to import and export project files with Final Cut Pro
• How to apply effects and modern transitions
• Creating a project and editing a video from start to finish
• Change the timing of clips

This is the perfect course if you’ve never used Final Cut Pro. It’s beginner-friendly and takes you through every step of using the platform, from creating a project to editing it and finally exporting a high-quality video.

Learning Final Cut Pro X – Video Editing Mastery

This is a video editing course for anyone using Mavericks OS. It’s designed to take full advantage of this Operating System alongside the Final Cut Pro X platform.

• Vendor: Udemy
• Cost: $14.99
• Duration: 6h 30min
• Rating: 4.7 / 5
• Level: Beginner

Key topics inside this course:

• Mastering the user interface and choosing your preferences
• Learning helpful shortcuts to speed up your workflow
• Best and quickest methods to import media
• How to organize your clips
• Using the timeline
• Working with effects, keyframes, compounds clips, and audio clips
• How to use generators and white screens
• The best export settings and other tips

If you’ve ever wanted to master Final Cut Pro X, there’s no better place to go. This course is designed to start on a beginner-friendly level. But, it moves to more advanced lessons later down the line.

2. Video Editing Tutorials - Mastering The Basics

The following video editing courses include lessons mainly on the basics of video editing. They won’t focus on any specific platform or tool. Instead, you’ll be learning the most important principles of creating a high-quality and modern video.

Video Production Essentials

A fairly simple course designed to teach you the process of creating and editing a video from scratch. This is one of the best video editing courses online, featuring several professional mentors.

• Vendor: Fiverr Learn
• Cost: $24
• Duration: 6h 38min
• Rating: 4.8 / 5
• Level: Beginner to Intermediate

Key topics inside this course:

• What equipment to use for professional video editing
• How to shoot high-quality video with your smartphone
• Professional video and audio recording techniques
• Exporting settings for high-quality online viewing
• Fundamentals of using a DSLR or Mirrorless camera
• Create high-converting CTAs for your videos

The course will help you understand crucial facts about many different types of videos that are in demand today. You’ll learn how to use and navigate video editing tools to create anything you can imagine. The mentors even offer a few tips for growing your own Youtube channel.

Free Video Editing Courses and Tutorials

This pick is slightly different. Here, you can see a list of a few of the best video editing courses that are completely free. They are still taught by experts and offer plenty of useful knowledge, especially for beginners.

• Vendor: Udemy
• Cost: Free
• Duration: Unknown
• Rating: Varies
• Level: Beginner to Intermediate

Key topics inside this course:

• Beginner lessons on editing all types of videos
• How to record professional video content
• Beginner lessons for many different video editing platforms
• 3D Video Composition
• Understand how to use Premiere Pro
• Video editing on your smartphone
• Camtasia 9 Mastery Course
• How to create social media marketing videos

This is a list of many different video editing courses that are free on Udemy. Millions of members have enrolled and are learning for free. Best of all, it’s a great way to dive into video editing for free. Then, you can choose some of the paid ones for more advanced lessons.

Introduction to Video Editing

This course gives you a LinkedIn Learning Certificate and the knowledge to edit your first-ever video. There are 6 different lesson categories that you will enjoy going through. Each one focuses on another skill or principle.

• Vendor: LinkedIn Learning
• Cost: $34.99
• Duration: 2h 53min
• Rating: 4.7 / 5
• Level: Beginner

Key topics inside this course:

• The importance of storytelling in video editing
• Structures and transitions
• Timing and pacing
• Shot composition
• Comparing different editing applications
• Track-based editing vs. storyline-based editing
• Organizing your files
• How to edit a short documentary
• Audio editing lessons
• Post-production processes

This course offers a video editing certification that proves you’re well accustomed to the basic principles of this skill. You will know your way around different editing platforms. You will learn how to edit modern videos. And you will know exactly where to focus your efforts for improving yourself and your skills next.

Video Editing Fundamentals

This course features essential video editing foundations in one exciting program. It’s a short course designed to introduce you to video editing. To be more precise, you will mainly learn about the post-production process of video editing.

• Vendor: LinkedIn Learning
• Cost: LinkedIn Learning Membership Only ($39.99)
• Duration: 37min
• Rating: 4.7 / 5
• Level: Beginner

Key topics inside this course:

• Trimming or fine-tuning the product
• Audio editing process
• How to add images to your videos
• Video effects tutorials
• Color correction
• How to use text to your advantage
• Export and delivery settings

This certificate will prove that you know what it takes to edit a video professionally. It tells us that you are familiar with all the different parts that come together to create a video worth watching.

Online Video Editing Classes

This is a list of video editing courses by some of the most popular video editors on the planet. You’ll learn from huge names such as Marques Brownies, Nathaniel Drew, Jordy Vandeput, and many more. So, pick your favorite, and start learning.

• Vendor: Skillshare
• Cost: Depends
• Duration: 37min
• Rating: Varies
• Level: From Beginner to Pro

Key topics inside this course:

• How to create mind-blowing Youtube videos
• Adobe Premiere Pro for Beginners
• How to document your life
• Final Cut Pro X - Beginner to Youtuber
• Introduction to Filmmaking
• Mastering TikTok videos
• iPhone Filmmaking
• Advanced training for all video editing apps

There are courses for all skill levels here. You can start as a complete beginner and finish as a master who knows how to create a worthwhile video. Or, you can choose one that improves your current skills.

The Complete Video Production Bootcamp

A nine-hour course on everything video editing related. To be more precise, you will dive into video production tutorials, cinematography, editing & distribution, and more. Companies like Nasdaq, Box, NetApp, and more offer this course to their employees.

• Vendor: Udemy
• Cost: $19.99
• Duration: 9h
• Rating: 4.5 / 5
• Level: Beginner

Key topics inside this course:

• Video storytelling
• How to record better audio
• Tips for posting videos online
• Discover the best equipment to use
• How to set up the perfect lighting
• How to get more engagement on your videos
• Create professional videos with any equipment

Over 160.000 students have benefited from the contents of this course. It dives into both beginner and advanced video editing lessons. So even if you don’t have any experience in this, you will still easily understand everything taught inside.

3. Video Editing Courses With Certification For Mobile Users

The courses you will see in this list are exclusively for mobile users. You can still make great videos on your mobile device if you don’t have a computer. All of the knowledge you need for this is below.

Smartphone Video For Beginners – iPhone Video Editing Course

Dive into five hours of content teaching you how to create unbelievable videos on your phone. You’ll be surprised by how it’s possible to create such professional videos on a smartphone.

• Vendor: Udemy
• Cost: $99.99
• Duration: 5h
• Rating: 4.3 / 5
• Level: Beginner

Key topics inside this course:

• Must-have gear for editing on a smartphone (Affordable options)
• How to set up your phone’s camera for optimal results
• Must-have free apps for professional smartphone video editing
• Using gimbals, action cams, and drones with your phone
• Video storytelling on a smartphone
• Phone resolutions, frame rates, ProRes, color space, and more
• How to make Cinematic shots, hit the right angles, and similar

This outstanding course will give you a certification proving you’re one of the rare video editors who can create wonders from their phones. From now on, you can’t use the excuse that you don’t have an excellent PC to create amazing videos.

4. Cinematic Level Video Editing Courses

The final category will introduce you to video editing courses online with certification for cinematic-level skills. Completing these courses will prove you are a master video editor who knows no bounds.

VIDEO EDITING. Techniques loved by pro broadcast filmmakers

Your teacher for this course will be Andrew St.Pierre White, an award-winning video editing veteran. He will teach you tips and tricks used by professionals to this day. Timeless advice that will take your career to the next level.

• Vendor: Udemy
• Cost: $84.99
• Duration: 3h 30min
• Rating: 4.5 / 5
• Level: Advanced to Pro

Key topics inside this course:

• How to entertain and inspire any audience
• Understand the balance between good editing and good content
• Amazing techniques used in TV production
• Turn great editing into great results
• Turn amateur videos into professional productions
• Most common mistakes filmmakers make

Once you know the basics of video editing, this course will take your skills to the next level. You will learn how the big players make professional videos that capture massive audiences. Plus, your mentor will show you how to work with big names in this industry.

The History of Film and Video Editing

Never underestimate how much history can teach you. Completing this course will teach you more about video editing than many pro filmmakers. Find out how video editing has progressed through the last century.

• Vendor: LinkedIn Learning
• Cost: $34.99
• Duration: 2h 10min
• Rating: 4.8 / 5
• Level: Everyone

Key topics inside this course:

• Early days of photography and film
• Continuity editing and montage theory
• When sound was born
• Establishing the standards for editing
• Evolution of editing techniques
• Technology
• The rise of the digital era

By learning the history of video editing, you will be more aware. You will realize what people love to see and detect patterns. These patterns will guide you toward becoming a professional video editor.

Make Your Video Editing Journey Easier

Now that we’re done with learning, it’s time to start doing. You already have enough fantastic courses to learn everything necessary to edit videos professionally. But now, how do you use your skills and achieve the easiest and quickest results?

Your best option is to use the Filmora video editor.

What Is Filmora and Filmora?

It’s as powerful as Adobe Premiere Pro but more straightforward to navigate. In addition, Filmora lets you command an arsenal of unique tools necessary for creating modern videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Anyone on both Windows and Mac can use Filmora. In addition, if you’re a mobile user, you can download Filmora and enjoy the same benefits.

Aside from its easy-to-use interface, Filmora is packed with editing resources that will never leave you wondering how or what to do next. Of course, you can watch the free Youtube tutorials to master the platform entirely.

For example, we have prepared you with a video tutorial below to start your video editing journey with no delay!

Lastly, you can easily export in any format necessary for your project. It doesn’t get easier than this.

Conclusion

The video editing certification online courses you see here are more than enough to prepare you. You will learn everything it takes to edit any video. Use this information wisely and take advantage of this beautiful opportunity to become one of the best video editors.

8 Tips to Apply Cinematic Color Grading to Your Videos

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Create A Freeze Frame Sequence In Your Videos

Are you considering getting your video editing skills to a new high level? Are you worried about spicing your videos with stylish shots and bringing attention to particular aspects of your video?

Freeze frame sequence is one the most stunning effects that can help you greatly. The freeze frame sequence has been used in many classic and present-day movies. And it will never go out of fashion.

Here, we will guide you on creating freeze frame sequences in your videos using Filmora. It is critical here to know what exactly the freeze frame sequence is. So let’s jump right into it!

Part 1. What Is A Freeze Frame?

A freeze frame is a specific single frame of the video clip shown repeatedly in the video. It gives the illusion of a static picture. It is used to draw the viewers’ attention to the minute details of a specific moment, to set up a powerful narrative, or to introduce your main characters.

Content creators can also use the freeze-frame effect on fast-moving objects to draw the viewers’ attention. Have a few examples of the most popular freeze frames used in the movies.

Examples of freeze frames in popular movies

Alfred Hitchcock used the first-ever freeze-frame in his film Champagne (1928). There is a long list of many famous tv shows and movies in which the freeze frame effect has been used since then. But to count a few, three examples are given here.

1. Pulp Fiction (1994)

In the beginning scene of Pulp Fiction, where robbery is about to occur, a freeze-frame effect is used to engage the audience. Later in the movie, it was relieved what would happen next. It was a dramatic pause to draw attention. It is a strong example of the freeze-frame effect.

2. The Breakfast Club (1985)

The ending of Breakfast Club is an iconic example of the freeze-frame effect. With a powerful narration, the freeze frame conveys the movie’s central idea to the audience.

3. Suicide Squad (2016)

In the trailer of Suicide Squad, freeze frames were used by the director to introduce the characters. This trailer used stylish animations to give relevant information about the film’s main characters.

Having discussed the famous examples, let’s learn about the power of freeze frames.

The power of freeze frame

The old freeze frames give a retro vibe. However, with the advancement in editing technology, this special effect has proved that there is no end. Furthermore, it has shown that you can do many things with pauses.

Especially when you are a content creator, this effect empowers you by advertising your skills impressively. It also conveys your message convincingly.

Being a content creator, you always want to reach the maximum audience. This special effect will serve this too. It will ultimately get you more viewership, more likes, and more subscriptions. But how to create a freeze frame?

Part 2. How To Create Freeze Frame Sequence? [Step-Wise Guide]

Let’s see how to add a freeze frame sequence in your video step-wise and get started.

Step1 Download Wondershare Filmora

Wondershare Filmora is an all-in-one video editing platform. It is enhanced with multiple practical media resources. You can head to Wondershare Filmora official site to download or upgrade your Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2 Import your clips and add them to the timeline

Open Filmora and create a new project. Import your clip into the media library. Add your clips to the first video layer on the timeline.

Step3 Apply color correction to the footage

Before we start our edit, let’s color correct our footage, so the corrected color is already applied when we take the screenshots.

Step4 Find your first action frame

Next, scrub through the clip to find your first action frame. For example, in this video, this is our first action frame.

Step5 Take a screenshot of the action frame

Let’s head to the camera icon under the preview screen and click the icon. It will take a screenshot of the current frame that the playhead is on the timeline.

Make sure to keep the playhead the same after you’ve taken the snapshot. You can find your screenshot in the media tab.

Step6 Add the screenshot to timeline

Let’s drag your screenshot onto video layer 2 and align it on the right side of the playhead. Then extend the screenshot so it lasts as long as your central clip.

Step7 Apply masks to the screenshot

Now, double-click on the screenshot. It will open the “Video” menu, then go into the “Mask” menu. Choose a mask shape and edit it so that it only covers where your subject is in the screenshot. For example, we choose the **”**Circle” mask shape in this video.

If you need help seeing what you’re masking, hide the main video layer and edit your mask like this.

Move the playhead forward and clean up your “mask.” Next, Increase the blur to soften the edges. But not too much because it may become visible on your subject.

Step8 Hide the first screenshot

Let’s layer a couple more action frames! First, hide the first screenshot so it doesn’t appear in your new screenshot.

Step9 Select your second action frame

Then, pick a new frame.

• Click the camera icon.
• Drag the screenshot at the new playhead spot.
• Extend the clip.

• Double-click to mask this frame.
• And play it back to make sure it looks good.
• It would help if you did this a couple more times until you have several frames.

Please have a look at the final product and how it looks!

And that’s how you create a freeze-frame video effect in Filmora.

Part 3. Tips To Use Freeze Frame Sequence

You’ve known how to make the freeze frame sequence. However, don’t miss essential tips to improve your video at the next stage.

Tip 1: Making a steady shot is important

First, ensure a steady shot with no camera shake while filming. You can use a tripod or a stable surface to keep your camera still.

Why is it necessary to make a steady shot?

• It helps you to make smooth, fluid shots.
• It is much more professional.
• It will take your editing skills to a new level.
• It grabs the attention of the viewers.
• It makes your editing easier.

Tip 2: No crossing over

Make sure your subject only crosses the same spot once. Otherwise, you would need help editing the video.

Why is it necessary to avoid crossing the same spot?

• It prevents misalignment of the shots, and your print won’t get damaged, primarily when you use pieces of the same image.
• It helps to create an illusion of holding specific moments.

Final Words

The Freeze Frame Sequence looks professional but much more manageable. The creator’s confidence gets to the next level when they learn how to create it. This step-wise guide using Wondershare Filmora is all for your ease.

Free Download For macOS 10.14 or later

Step2 Import your clips and add them to the timeline

Open Filmora and create a new project. Import your clip into the media library. Add your clips to the first video layer on the timeline.

Step3 Apply color correction to the footage

Before we start our edit, let’s color correct our footage, so the corrected color is already applied when we take the screenshots.

Step4 Find your first action frame

Next, scrub through the clip to find your first action frame. For example, in this video, this is our first action frame.

Step5 Take a screenshot of the action frame

Let’s head to the camera icon under the preview screen and click the icon. It will take a screenshot of the current frame that the playhead is on the timeline.

Make sure to keep the playhead the same after you’ve taken the snapshot. You can find your screenshot in the media tab.

Step6 Add the screenshot to timeline

Let’s drag your screenshot onto video layer 2 and align it on the right side of the playhead. Then extend the screenshot so it lasts as long as your central clip.

Step7 Apply masks to the screenshot

Now, double-click on the screenshot. It will open the “Video” menu, then go into the “Mask” menu. Choose a mask shape and edit it so that it only covers where your subject is in the screenshot. For example, we choose the **”**Circle” mask shape in this video.

If you need help seeing what you’re masking, hide the main video layer and edit your mask like this.

Move the playhead forward and clean up your “mask.” Next, Increase the blur to soften the edges. But not too much because it may become visible on your subject.

Step8 Hide the first screenshot

Let’s layer a couple more action frames! First, hide the first screenshot so it doesn’t appear in your new screenshot.

Step9 Select your second action frame

Then, pick a new frame.

• Click the camera icon.
• Drag the screenshot at the new playhead spot.
• Extend the clip.

• Double-click to mask this frame.
• And play it back to make sure it looks good.
• It would help if you did this a couple more times until you have several frames.

Please have a look at the final product and how it looks!

And that’s how you create a freeze-frame video effect in Filmora.

Part 3. Tips To Use Freeze Frame Sequence

You’ve known how to make the freeze frame sequence. However, don’t miss essential tips to improve your video at the next stage.

Tip 1: Making a steady shot is important

First, ensure a steady shot with no camera shake while filming. You can use a tripod or a stable surface to keep your camera still.

Why is it necessary to make a steady shot?

• It helps you to make smooth, fluid shots.
• It is much more professional.
• It will take your editing skills to a new level.
• It grabs the attention of the viewers.
• It makes your editing easier.

Tip 2: No crossing over

Make sure your subject only crosses the same spot once. Otherwise, you would need help editing the video.

Why is it necessary to avoid crossing the same spot?

• It prevents misalignment of the shots, and your print won’t get damaged, primarily when you use pieces of the same image.
• It helps to create an illusion of holding specific moments.

Final Words

The Freeze Frame Sequence looks professional but much more manageable. The creator’s confidence gets to the next level when they learn how to create it. This step-wise guide using Wondershare Filmora is all for your ease.

Also read: